Professional Documents
Culture Documents
DATA SHEET
For a complete data sheet, please also download:
74HC/HCT241
Octal buffer/line driver; 3-state
Product specification September 1993
File under Integrated Circuits, IC06
Philips Semiconductors Product specification
TYPICAL
SYMBOL PARAMETER CONDITIONS UNIT
HC HCT
tPHL/ tPLH propagation delay CL = 15 pF; VCC = 5 V 7 11 ns
1An to 1Yn;
2An to 2Yn
CI input capacitance 3.5 3.5 pF
CPD power dissipation capacitance per buffer notes 1 and 2 30 30 pF
Notes
1. CPD is used to determine the dynamic power dissipation (PD in µW):
PD = CPD × VCC2 × fi + ∑ (CL × VCC2 × fo) where:
fi = input frequency in MHz
fo = output frequency in MHz
∑ (CL × VCC2 × fo) = sum of outputs
CL = output load capacitance in pF
VCC = supply voltage in V
2. For HC the condition is VI = GND to VCC
For HCT the condition is VI = GND to VCC − 1.5 V
ORDERING INFORMATION
See “74HC/HCT/HCU/HCMOS Logic Package Information”.
September 1993 2
Philips Semiconductors Product specification
PIN DESCRIPTION
Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol
September 1993 3
Philips Semiconductors Product specification
FUNCTION TABLES
INPUTS OUTPUT
1OE 1An 1Yn
L L L
L H H
H X Z
INPUTS OUTPUT
20E 2An 2Yn
H L L
H H H
L X Z
Note
1. H = HIGH voltage level
L = LOW voltage level
X = don’t care
Z = high impedance OFF-state
September 1993 4
Philips Semiconductors Product specification
September 1993 5
Philips Semiconductors Product specification
September 1993 6
Philips Semiconductors Product specification
AC WAVEFORMS
Fig.5 Waveforms showing the input (1An, 2An) to output (1Yn, 2Yn) propagation delays and the output transition
times.
Fig.6 Waveform showing the 3-state enable and disable times for input 1OE.
Fig.7 Waveform showing the 3-state enable and disable times for input 2OE.
September 1993 7
Philips Semiconductors Product specification
PACKAGE OUTLINES
See “74HC/HCT/HCU/HCMOS Logic Package Outlines”.
September 1993 8