Professional Documents
Culture Documents
Dse8610 Data Sheet PDF
Dse8610 Data Sheet PDF
DSEGenset
TEMPERATURE
BS EN 60068
The DSE8610 is an easy to use The event log will record 250 events KEY LOAD SHARE FEATURES: Ab/Ae Cold Test -30oC
Synchronising Auto Start Control to facilitate easy maintenance. An • Peak lopping/sharing (with BS EN 60068-2-2
Bb/Be Dry Heat +70oC
Module suitable for use in a extensive number of fixed and DSExx60)
multi-generator loadshare system, flexible monitoring, metering and • Sequential set start VIBRATION
designed to synchronise up to 32 protection features are included • Manual voltage/frequency BS EN 60068-2-6
Ten sweeps in each of three major axes
generators including electronic and as well as comprehensive adjustment 5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn
non-electronic engines. communication and system • R.O.C.O.F. and vector shift
expansion options. protection HUMIDITY
BS EN 60068-2-30
The DSE8610 monitors the • Generator load demand Db Damp Heat Cyclic 20/55oC @ 95% RH
generator and indicates operational Using the DSE PC Configuration • Automatic hours run balancing 48 Hours
status and fault conditions, Suite Software allows easy • Mains (Utility) de-coupling BS EN 60068-2-78
Cab Damp Heat Static 40oC @ 93% RH
automatically starting or stopping alteration of the operational • Mains (Utility) de-coupling 48 Hours
the engine on load demand or fault sequences, timers and alarms. With test mode
SHOCK
condition. all communication ports capable of • Dead bus sensing BS EN 60068-2-27
being active at the same time, the • Bus failure detection Three shocks in each of three major axes
System alarms are annunciated on DSE8610 is ideal for a wide variety • Direct governor and AVR control 15gn in 11mS
the LCD screen (multiple language of demanding load share • Volts and frequency matching DEGREES OF PROTECTION
options available), illuminated LED applications. • kW and kV Ar load sharing PROVIDED BY ENCLOSURES
BS EN 60529
and audible sounder. • Dead bus synchronising IP65 - Front of module when installed into the
control panel with the supplied sealing gasket.
DSENET ®
RS232 AND USB USB CONFIGURABLE DC OUTPUTS ANALOGUE EMERGENCY DC POWER
EXPANSION RS485 PORT HOST INPUTS SENDERS STOP SUPPLY 8-35V
+
ETHERNET
DEUTZ
DSE8610 MSC
ISUZU
PERKINS
CATERPILLAR
MTU
7 55xx 75xx 8xxx VOLVO
OTHER
CUMMINS
SCANIA
BUS VOLT FREE GENERATOR SENSING FUEL & START CHARGE ELECTRONIC MAGNETIC
SENSING OUTPUTS OUTPUTS ALTERNATOR ENGINES PICK-UP
CURRENT VOLTS
D+
+ W/L
ISSUE 3
®
DSEGenset
DSE8610 SPECIFICATION
CRANKING DROPOUTS
FEATURES Able to survive 0 V for 50 mS, providing
supply was at least 10 V before dropout
and supply recovers to 5 V. This is achieved
without the need for internal batteries
OUTPUTS
OUTPUT A (FUEL)
15 A DC at supply voltage
OUTPUT B (START)
15 A DC at supply voltage
OUTPUTS C & D
8 A AC at 250 V AC (Volt free)