Professional Documents
Culture Documents
• no corrosion Water treatment. A water treatment system for Seawater and fresh water cooling (non essenti-
drinking water and waste water is always al). For cooling seawater or fresh water, for exa-
• light weight and easy handling necessary on board a ship. As well as water mple in air conditioning systems, etc., our PE 100
conditioning for swimming pool water. The best and ABS systems are implemented.
• long service life solutions for these applications are our ABS, They are robust and very suitable for use at low
• fast installation xible. Due to the weight advantage, they are also Grey and black water. Our ABS, and PVC-U
very suitable for use on yachts. solvent cement systems and our fusion-jointed
• low noise emission systems, FUSEAL® Sea Drain and PE100, are
Cooling systems. When indirect cooling goes all ideal for industrial and waste water. These
• global availability below 0 °C, plastics which can withstand these plastics can be used at temperatures 0°C - 90°C.
temperatures are required. This is where ABS Like all our plastic systems, they do not corrode
and PE 100 show their strengths because they and therefore provide a much longer service
can be used down to –40 °C. They are robust and life. Additionally, they exhibit high mechanical
have excellent impact strength. strength, and vacuum stability which is very
important on ships.
Hot and cold drinking water. To supply your state
rooms or the kitchen with water, we reccommend Bilge, drainage and ballast systems. Larger
our INSTAFLEX (PB) in combination with iFIT
®
dimensioned systems are necessary for bilge,
and AQUASYSTEM (PP-R) systems. drainage and ballast systems. PE 100 is ideal for
Both withstand temperatures from 0 °C such applications. It is on offer in the dimension
to 95 °C and are therefore resistant to hot water. range 20–315 mm, including a large selection
Thanks to its flexibility, the material PB of fittings. Among the multiple benefits, such
(INSTAFLEX®) is also very easy to install, it can as light weight and good abrasion resistance,
be obtained pre-fabricated in lengths of 50 m the easy handling comes to the fore. It can be
rolled together. installed with electrofusion jointing, which is very
simple and saves time.
PP-H • • • •
Stainless steel 79 197 505 1542
PB INSTAFLEX • • • • • • • • applied
Butterfly Valve • • • • • • • •
GF Piping Systems
Throughout the world everyone demands a secure supply of cle-
an water. GF Piping Systems is meeting this challenge by providing
complete piping systems suitable for safe operation in virtually all
environments. We have developed systems comprising pipe, fittings,
valves, and measuring and control devices in high quality corrosion
resistant thermoplastics for the transport of not only clean water, but
also gas and other industrial media.
Whether installed above or below ground, in industrial, commercial or
domestic applications, GF Piping Systems provides a solution.
For more information on Ship Building: The technical data are not binding and
not expressly warranted characteristics
of the goods. They are subject to change
www.piping.georgfischer.com > Industrial Systems > Ship Building Our General Conditions of Safe apply.