Professional Documents
Culture Documents
Issue Draft A
Date 2018-04-04
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: http://www.huawei.com
Email: support@huawei.com
Contents
1 Overview......................................................................................................................................... 1
1.1 Exterior ......................................................................................................................................................................... 1
1.2 Ports .............................................................................................................................................................................. 1
1 Overview
The AAU5613 is an RF module that integrates array antennas and RF units and supports
massive MIMO.
1.1 Exterior
1.2 Ports
1.1 Exterior
Figure 1-1 shows the AAU5613 exterior.
1.2 Ports
Table 1-1 Ports on an AAU
2 Technical Specifications
N78 (3.5 GHz) 3400 MHz to 3600 40 MHz, 60 200 MHz 200 MHz
MHz MHz, 80
MHz, and
100 MHz
N78 (3.7 GHz) 3600 MHz to 3800 40 MHz, 60 200 MHz 200 MHz
MHz MHz, 80
MHz, and
100 MHz
Gain (dBi) 24
2.4 Capacity
Table 2-3 AAU5613 capacity
The typical power consumption is measured when the ambient temperature is 25°C and the AAU is
100% loaded. The actual typical power consumption has a 10% deviation from this value.
Item Specifications
Item Specifications
Dimensions (H x W x D) 795 mm x 395 mm x 220 mm
Weight ~ 45 kg (not including mounting kits)
Item Specifications
Operating –40°C to +55°C (without solar radiation)
temperature
Operating 150 km/h
wind speed
Rated wind 200 km/h
velocity
Relative 5% RH to 100% RH
humidity
Atmospheric 70 kPa to 106 kPa
pressure
Operating The operating environment of the AAU5281 must comply with the
environment following standards:
3GPP TS38.141
ETSI300019-1-4 V2.2.1(2014-04) Class 4.1: "Non-weatherprotected
locations"
Anti-seismic YD5083-1999: Interim Provisions for Test of Anti-seismic
protection Performances of Telecommunications Equipment (telecom industry
standard in People's Republic of China)
ETSI300019-2-3(V2.4.1 2015-12)
GR63-CORE,Issue 4, April 2012 Zone4
Ingress IP65
protection
(IP) rating
Surge IEC 62305-1 Protection against lightning - Part 1: General principles
protection IEC 62305-3 Protection against lightning - Part 3: Physical damage to
structures and life hazard
IEC 62305-4 Protection against lightning - Part 4: Electrical and
electronic systems within structures
ITU-T K.35 Bonding configurations and earthing at remote electronic
Item Specifications
sites
ITU-T K.56 Protection of radio base stations against lightning
discharges
ITU-T K.97 Lightning protection of distributed base stations
ETSI EN 300 253 Environmental Engineering(EE): Earthing and
bonding configuration inside telecommunications centers
YD 2324-2011: Lightning protection requirements and test methods for
radio base stations
GB/T 50689-2011: Code for design of lightning protection and
earthing engineering for telecommunication bureaus (stations)