Professional Documents
Culture Documents
1. WIRE ROPES
& FITTINGS
34LR
34LR-PI
0,76
6-PI
0,64
1960 2160
8-PI
0,68
Rope grade
1960 2160
mm kN tonnes kN tonnes kg/100m
10 88.2 8.99 - - 45.3
11 107 10.9 - - 55.9
12 127 12.9 - - 65.3
13 149 15.2 - - 76.6
14 173 17.6 - - 88.8
15 198 20.2 - - 103
16 226 23 236 24.1 116
17 255 26 267 27.2 135
18 286 29.1 299 30.5 150
19 318 32.5 333 33.9 167
20 353 36 369 37.6 184
22 427 43.5 446 45.5 222
24 508 51.8 531 54.2 265
26 596 60.8 623 63.6 315
28 691 70.55 723 73.7 367
30 794 80.9 830 84.6 425
32 903 92.1 944 96.3 485
34 1020 103.9 1066 109 543
36 1143 116.5 1195 122 606
38 1274 129.8 1332 136 678
40 1411 143.9 1476 150 755
42 1556 158.6 1627 166 842
44 1708 174.1 1786 182 925
46 1866 190.2 1952 199 1010
48 2032 207.1 2125 217 1110
50 2205 224.8 2306 235 1200
8-15mm 6x26 WS16-46mm 6x36 WS48-50mm 6x41 WS
RCN
0,64 23-1
RCN
0,64 23-1
Ropetex 6
Wire rope construction: 6x36-IWRC, Compacted outer strands
Standard: EN 12385-4
ISO 4309 Rope Category No: 10-40mm RCN.09
RCN
0,64 09
Ropetex 8PI
Wire rope construction: Ropetex 8PI is a 8-strand non rotation-resistant rope with .
a plastic layer between the IWRC and 8 compacted outer strands.
Features:
• Ropetex 8PI has a high breaking load and good structural stability
• Ropetex 8PI is fully lubricated and made both of galvanized and ungalvanized wires
• Ropetex 8PI is suitable for multi layer spooling
• Ropetex 8PI has a good resistance against drum crushing
• Ropetex 8PI should not be used with a swivel.
mm inch kg/m lb/ft*1 kg/ft*1 kN t(M) 2000 lbs kN t(M) 2000 lbs kN t(M) 2000
lbs
8 5/16 0,288 0,19 0,09 52,1 5,3 5,9 57,7 5,9 6,5 60,6 6,2 6,8
9 0,364 0,24 0,11 66 6,7 7,4 73 7,4 8,2 76,7 7,8 8,6
10 0,45 0,3 0,14 81,5 8,3 9,2 90,1 9,2 10,1 94,7 9,6 10,6
11 7/16 0,544 0,37 0,17 98,6 10 11,1 109,1 11,1 12,3 114,6 11,7 12,9
12 0,648 0,44 0,2 117,3 12 13,2 129,8 13,2 14,6 136,3 13,9 15,3
12,7 1/2 0,726 0,49 0,22 131,4 13,4 14,8 145,4 14,8 16,3 152,7 15,6 17,2
13 0,76 0,51 0,23 137,7 14 15,5 152,3 15,5 17,1 160 16,3 18
14 0,882 0,59 0,27 159,7 16,3 18 176,7 18 19,9 185,6 18,9 20,9
15 1,012 0,68 0,31 183,3 18,7 20,6 202,8 20,7 22,8 213 21,7 23,9
16 5/8 1,152 0,77 0,35 208,6 21,3 23,4 230,7 23,5 25,9 242,4 24,7 27,2
17 1,3 0,87 0,4 235,5 24 26,5 260,5 26,5 29,3 273,6 27,9 30,8
18 1,457 0,98 0,44 264 26,9 29,7 292 29,8 32,8 306,8 31,3 34,5
19 3/4 1,624 1,09 0,5 294,2 30 33,1 325,4 33,2 36,6 341,8 34,8 38,4
20 1,799 1,21 0,55 325,9 33,2 36,6 360,5 36,7 40,5 378,7 38,6 42,6
21 1,984 1,33 0,6 359,3 36,6 40,4 397,5 40,5 44,7 417,5 42,5 46,9
22 2,177 1,46 0,66 394,4 40,2 44,3 436,2 44,5 49 458,3 46,7 51,5
22,4 2,257 1,52 0,69 408,9 41,7 46 452,2 46,1 50,8 475,1 48,4 53,4
23 2,38 1,6 0,73 431 43,9 48,4 476,8 48,6 53,6 500,9 51 56,3
24 2,591 1,74 0,79 469,3 47,8 52,8 519,1 52,9 58,4 545,4 55,6 61,3
25 2,812 1,89 0,86 509,3 51,9 57,2 563,3 57,4 63,3 591,8 60,3 66,5
25,4 1 2,902 1,95 0,88 525,7 53,6 59,1 581,5 59,3 65,4 610,8 62,2 68,7
26 3,041 2,04 0,93 550,8 56,1 61,9 609,3 62,1 68,5 640 65,2 71,9
27 3,279 2,2 1 594 60,5 66,8 657 67 73,9 690,2 70,3 77,6
28 3,527 2,37 1,08 638,8 65,1 71,8 706,6 72 79,4 742,3 75,6 83,4
28,6 1-1/8 3,68 2,47 1,12 666,5 67,9 74,9 737,2 75,1 82,9 774,5 78,9 87
29 3,783 2,54 1,15 685,3 69,8 77 758 77,2 85,2 796,3 81,1 89,5
30 4,049 2,72 1,23 733,4 74,7 82,4 811,1 82,7 91,2 852,1 86,8 95,8
31 4,323 2,9 1,32 783,1 79,8 88 866,1 88,3 97,4 909,9 92,7 102,3
32 1-1/4 4,606 3,1 1,4 834,4 85 93,8 922,9 94 103,7 969,5 98,8 109
33 4,899 3,29 1,49 887,4 90,4 99,7 981,5 100 110,3 1031 105,1 115,9
34 5,2 3,49 1,59 941,9 96 105,9 1042 106,2 117,1 1095 111,5 123
35 1-3/8 5,511 3,7 1,68 998,2 101,7 112,2 1104 112,5 124,1 1160 118,2 130,4
36 5,83 3,92 1,78 1056 107,6 118,7 1168 119 131,3 1227 125 137,9
38 1-1/2 6,496 4,36 1,98 1177 119,9 132,3 1301 132,6 146,3 1367 139,3 153,7
40 7,198 4,84 2,19 1304 132,9 146,5 1442 146,9 162,1 1515 154,4 170,3
Other dimensions on request.
mm inch kg/m lb/ft*1 kg/ft*1 kN t(M) 2000 lbs kN t(M) 2000 lbs kN t(M) 2000
lbs
41,3 1-5/8 7,673 5,16 2,34 1390 141,6 156,2 1537 156,7 172,8 1615 164,6 181,5
42 7,935 5,33 2,42 1437 146,5 161,6 1590 162 178,7 1670 170,2 187,7
44 8,709 5,85 2,66 1578 160,7 177,3 1745 177,8 196,1 1833 186,8 206
45 1-3/4 9,109 6,12 2,78 1650 168,1 185,5 1825 186 205,1 1917 195,4 215,5
46 9,519 6,4 2,9 1724 175,7 193,8 1907 194,3 214,4 2003 204,2 225,2
47,5 1-7/8 10,15 6,82 3,09 1838 187,3 206,6 2034 207,2 228,6 2136 217,7 240,1
48 10,36 6,96 3,16 1877 191,3 211 2077 211,6 233,4 2181 222,3 245,2
50 2 11,246 7,56 3,43 2037 207,6 229 2253 229,6 253,3 2367 241,2 266,1
52 12,164 8,17 3,71 2203 224,5 247,7 2437 248,3 273,9 2560 260,9 287,8
Other dimensions on request.
Verotech 10
General: 10 strand rope with a plastic layer between the steel core and the compacted outer strands.
Features:
• Very high breaking strength
• Very stabile rope construction with very good fatigue properties
• A plastic layer between inner and outer strands prevents inner wear and protects the core from corrosion
• Very high resistance against flattening and wear
• Specially suitable for multilayer spooling
RCN
0,73 +2% – +4% 11
Properties:
• Rotations resistant wire rope with extremely high breaking force
• Very good fatigue properties
• Very high resistance against flattening and wear
• Especially suitable for multiple layer spooling
RCN
+2% – +4% 23-2
Table continues
Table continued
Nominal diameter Approx. Weight Minimum breaking strength
1960 Grade 2160 Grade
mm inch kg/m lb/ft*1 kg/ft*1 kN t(M) 2000 lbs kN t(M) 2000 lbs
44 9,482 6,37 2,89 1848 188,3 207,7 1898 193,4 213,3
45 1-3/4 9,918 6,66 3,02 1932 196,9 217,2 1985 202,3 223,2
46 10,364 6,96 3,16 2019 205,8 227 2075 211,4 233,2
48 11,285 7,59 3,44 2199 224 247,1 2259 230,2 253,9
50 2 12,245 8,23 3,73 2386 243,1 268,2 2451 249,8 275,5
52 13,244 8,9 4,04 2580 262,9 290 2651 270,1 298
54 2-1/8 14,282 9,6 4,35 2783 283,6 312,8 None None None
56 15,36 10,32 4,68 2993 305 336,4 None None None
Veropro 8
Wire rope construction: 8-strand wire rope with compacted outer strands .
and steel core, plastic layer between inner and outer strands.
Features:
• Very high breaking strength
• Very stabile rope construction with very good fatigue properties
• A plastic layer between inner and outer strands prevents inner .
wear and protects the core from corrosion
• Very high resistance against flattening and wear
• Specially suitable for multilayer spooling.
Standard: EN 12385-4
ISO 4309 Rope Category No: Up to 42mm RCN.09, 43-48mm RCN.11, > 48mm RCN.13
End Stops
We can supply various end stops including ranges of OEM products. We also
supply bespoke end stops upon request.
0,47
0,55
Ordinary
0,45
Seal
RCN
0,50 09
RCN
0,50 09
Python Super 8S
Features: 8 strand High Performance Swaged Rope with a plastic covered IWRC. The optimised
construction provides an excellent combination of flexibility, longevity and abrasion resistance.
Designed for tough working environments it excels where damage is an issue. The oval
geometry of the strands allows for optimised distribution of pressure on drum and sheaves,
resulting in reduced wear and abrasion.
Material: High Carbon Steel.
Marking: On Termination ID and CE mark.
Safety Factor: 5:1 Unless otherwise requested.
Finish: Galvanised or Ungalvanised.
Standard: EN 12385-4
ISO 4309 Rope Category No: All Diameters RCN.0
RCN RCN
0,67 06 09
RCN
0,49 09
We stock various elevator ropes, please see below for our most commonly stocked items.
Spliced eye with ferrule Spliced eye with ferrule and thimble Spliced eye with ferrule and
90 % 90 % solid thimble
90 %
Eureka wirelock
80-99 %
Angle 1-part Choke U-lift 0˚– 45˚ 45˚– 60˚ 0˚– 45˚ 45˚– 60˚ Straight Choke U-løft
Load Factor 1 0,8 2 1,4 1 2,1 1,5 2 1,6 4
mm WLL ton
8 0,8 0,65 1,6 1,15 0,8 1,7 1,2 1,6 1,3 3,2
9 1,05 0,8 2,1 1,45 1,05 2,2 1,8 2,1 1,7 4,2
Safety Factor 5:1 EN 13414-1
10 1,3 1,0 2,6 1,8 1,3 2,7 1,9 2,6 2,0 5,2
11 1,5 1,2 3,0 2,2 1,5 3,3 2,3 3,0 2,5 6,0
12 1,8 1,4 3,6 2,6 1,8 3,9 2,8 3,6 3,0 7,2
13 2,2 1,8 4,4 3,0 2,2 4,5 3,2 4,4 3,5 8,8
14 2,5 2,0 5,0 3,5 2,5 5,3 3,8 5,0 4,0 10,0
16 3,3 2,6 6,6 4,6 3,3 6,9 4,9 6,6 5,2 13,2
18 4,1 3,3 8,2 5,8 4,1 8,7 6,2 8,2 6,6 16,4
20 5,1 4,1 10,2 7,2 5,1 10,7 7,7 10,2 8,2 20,4
22 6,2 5,0 12,4 8,7 6,2 13,0 9,3 12,4 10,0 24,8
24 7,4 5,9 14,8 10,3 7,4 15,5 11,1 14,8 11,8 29,6
26 8,7 7,0 17,4 12,1 8,7 18,2 13,0 17,4 13,8 34,8
28 10,0 8,0 20,0 14,0 10,0 21,0 15,0 20,0 16,0 40,0
32 13,0 10,4 26,0 18,4 13,0 27,5 19,7 26,0 21,0 52,0
36 16,6 13,3 33,0 23,0 16,6 35,0 25,0 33,0 26,5 66,0
40 20,5 16,4 41,0 29,0 20,5 43,0 31,0 41,0 33,0 82,0
44 25,0 20,0 50,0 35,0 25,0 52,0 37,0 50,0 40,0 100,0
48 29,5 23,6 59,0 41,0 29,5 62,0 44,0 59,0 47,0 118,0
52 35,0 28,0 70,0 48,0 35,0 73,0 52,0 70,0 55,0 140,0
56 40,0 32,0 80,0 56,0 40,0 84,0 60,0 80,0 64,0 160,0
60 46,0 37,0 92,0 65,0 46,0 97,0 69,0 92,0 74,0 184,0
Angle 1-part Choke U-lift 0˚– 45˚ 45˚– 60˚ 0˚– 45˚ 45˚– 60˚ 1-part Choke U-løft
Load Factor 1 0,8 2 1,4 1 2,1 1,5 2 1,6 4
Safety Factor 5:1 EN 13414-1
mm WLL ton
8 0,7 0,5 1,4 1,0 0,7 1,4 1,0 1,3 1,1 2,7
9 0,8 0,7 1,6 1,1 0,8 1,8 1,3 1,6 1,4 3,2
10 1,1 0,9 2,2 1,5 1,1 2,3 1,6 2,2 1,7 4,3
11 1,3 1,0 2,5 1,8 1,3 2,7 2,0 2,5 2,1 5,0
12 1,5 1,2 3,1 2,2 1,5 3,2 2,3 3,1 2,4 6,1
13 1,8 1,4 3,6 2,5 1,8 3,8 2,7 3,6 2,9 7,2
14 2,3 1,6 4,1 2,9 2,1 4,3 3,2 4,1 3,3 8,3
16 2,7 2,2 5,4 3,8 2,7 5,7 4,1 5,4 4,3 10,8
18 3,4 2,8 6,8 4,8 3,4 7,2 5,1 6,8 5,5 13,7
20 4,2 3,4 8,5 5,9 4,2 9,0 6,4 8,5 6,8 16,9
22 5,1 4,1 10,3 7,2 5,1 10,8 7,7 10,3 8,3 20,7
24 6,1 4,9 12,2 8,6 6,1 12,9 9,2 12,2 9,9 24,3
26 7,2 5,8 14,4 10,1 7,2 15,1 10,8 14,4 11,5 28,8
28 8,4 6,7 16,7 11,7 8,4 17,6 12,6 16,7 13,5 33,3
32 10,8 8,7 21,6 15,1 10,8 23,0 16,2 21,6 17,6 43,2
36 13,5 10,8 27,0 18,9 13,5 28,8 20,7 27,0 22,5 54,0
40 17,1 13,5 34,2 24,3 17,1 36,0 25,7 34,2 27,0 68,4
Grommet
General: Cable layed grommets can be used in all types of lifting operations. They
come in different lengths and designs. This design gives great flexibility.
Cablelayed grommets: 7x6x36WS-CW EN 13414-3.
Breaking load: 1960 N/qmm2..
Standard: EN 13414-3.
A
General: Protection of rope loops with holes for bolts
L
Finish: Cast
Design: Casted type DIN 3091
Finish: Untreated
Ferrules
Crosby G-414 Thimbles
Features: Greater protection against wear and deformation of the .
wire rope eye. Longer service life.
Material: Steel
Marking: Manufacturer’s symbol
Finish: Galvanised
Standard: EN 13411-1
2018020 - 1/4 6-7 3 55.5 41.4 38.1 22.4 11,2 7.10 1.50
2018021 - 5/16 8 5.35 63.5 47.8 46 26.9 14,0 8.65 2.05
2018022 - 3/8 9-10 9.8 73,0 54,0 54 28.7 16,8 10.4 2.80
2018023 - 7/16 11-12 15.7 82.5 60.5 60.5 31.8 18.8 11.9 3.30
2018024 04D0410 9/16 13-15 23.1 92,0 70,0 70,0 38.1 23.4 13,5 3.55
2018025 04D0420 5/8 16 34.3 108 82.5 79.5 44.5 26,2 16.8 4.05
2018026 04D0430 3/4 18-20 72 127 95.5 96,5 51 33,0 19.8 5.60
2018027 04D0440 7/8 22 81 140 108 108 57 37,3 23.9 5.60
2018028 04D0442 1 24-26 142 156 114 125 63.5 44,5 26.9 6.35
2018029 04D0443 11/8 - 11/4 28-32 181 178 130 149 73 47,8 33.3 6.35
2018030 - 11/4 - 13/8 32-35 402 230 165 173 89 57,2 36.6 9.65
2018031 04D0445 13/8 - 11/2 35-38 587 229 159 181 89 66,5 39.6 12.7
2018032 - 15/8 40 771 286 203 207 102 76,2 43.7 12.7
2018033 04D0447 13/4 44 805 310 229 216 114 77,7 46.7 12.7
2018034 04D0449 17/8 - 2 48-52 1259 384 305 264 152 85,9 53,0 12.7
2018035 - 21/4 56 1792 435 356 302 178 98,6 60.5 16,0
Dimension mm
1-128
Last two digits indicates size
Dimension mm
8-60
Last two digits indicates size
Dimension mm
1-36
Last two digits indicates size
Dimension mm
1-30
Last two digits indicates size
Dimension mm
1,5-8
Last two digits indicates size
Dimension mm
1-30
Last two digits indicates size
Wire ropes for general applications with fiber or steel core with max strenght of 1960
N/mm2. Not for use with compacted or hammered wire ropes. It is not recommended to
use plastic covered ropes for lifting purposes with wire rope clamps.
In case the clamps half-parts tangent each other when tightening the screws, a
smaller EUREKA wire clamp shall be used. Follow the fitting instructions in the user
manual before use.
mm mm mm mm mm mm mm mm
04E0010 5 13 7 13 M5 25 13 25
04E0020 6,5 17 8 16 M6 32 14 30
04E0030 8 20 10 20 M8 41 18 39
04E0040 10 24 12 20 M8 46 21 40
04E0050 13 30 15 28 M12 64 29 55
04E0060 16 35 18 32 M14 76 35 64
04E0070 19 36 22 32 M14 83 40 68
04E0080 22 40 24 34 M16 96 44 74
04E0090 26 50 26 38 M20 111 51 84
04E0100 30 55 34 41 M20 127 59 95
04E0110 34 60 38 45 M22 141 67 105
04E0120 40 65 44 49 M24 159 77 117
Wedge Sockets
Crosby Wedge Socket CL with Wedge S-421T
Features:
• Pin diameter and jaw opening allows wedge and socket to be used in conjunction
with open swage and spelter sockets
• Secures the tail or “dead end” of the wire rope to the wedge, thus eliminates loss or
“Punch out” of the wedge
• Eliminates the need for an extra piece of rope, and is easily installed
• The TERMINATOR™ wedge eliminates the potential breaking off of the tail due to
fatigue
• The tail, which is secured by the base of the clip and the wedge, is left undeformed
and available for reuse
• Incorporates Crosby’s patented QUIC-CHECK™ “Go” and “No-Go” feature cast into the
wedge
• Utilises standard Crosby Red-U-Bolt wire rope clip
• Generates a minimum efficiency of 80% based on the catalogue breaking strength of
the wire rope.
Follow the fitting instructions for the wire clamps, see technical information.
Follow the fitting instructions for the wire clamps, see technical information.
Material: Forged steel sockets through 11/2”, cast alloy steel 1-5/8” through 4”.
Marking: ID code and Manufacturer's symbol. L
A
Safety Factor: 5:1.
Finish: Galvanised. J
04A0170 4.5 1/4 6-7 116 19.1 17.5 9.65 17.5 39.6 57.0 39.6 33.3 9.1 .50
04A0180 12 5/16 - 3/8 8-10 123 20.6 20.6 12.7 20.6 42.9 57.0 44.5 38.1 11.2 .59
04A0090 20 7/16 - 1/2 11-13 141 25.4 25.4 14.2 23.9 47.8 63.5 51.0 47.8 12.7 1.02
04A0100 27 9/16 - 5/8 14-16 171 31.8 30.2 17.5 28.7 57.0 76.0 63.5 57.0 14.2 1.863
04A0110 43 3/4 18 202 38.1 35.1 20.6 31.8 66.5 89.0 76.0 66.5 15.7 2.64
04A0120 55 7/8 20-22 235 44.5 41.4 23.9 38.1 82.5 102 89.0 79.5 20.3 4.438
04A0140 78 1 24-26 268 51.0 51.0 28.7 44.5 95.5 114 102 95.5 22.4 7.03
04A0150 92 1 1/8 28-30 300 57.0 57.0 31.8 51.0 105 127 117 105 25.4 9.75
04A0160 136 1 1/4 - 1 3/8 32-35 335 63.5 63.5 38.1 57.0 121 140 127 121 28.7 14.1
170 1 1/2 38 384 76.0 70.0 41.4 70.0 133 152 152 137 30.2 21.4
188 † 1 5/8 40-42 413 76.0 76.0 44.5 76.0 140 165 165 146 33.3 24.9
268 † 1 3/4 - 1 7/8 44-48 464 89.0 89.0 51.0 79.5 162 191 178 165 39.6 37.2
291 † 2 - 2 1/8 50-54 546 102 95.5 57.2 95.5 187 216 229 178 46.0 59
360 † 2 1/4 - 2 3/8 56-60 597 114 108 63.5 102 210 229 254 197 54.0 76
424 † 2 1/2 - 2 5/8 64-67 648 127 121 73.0 114 235 248 274 216 60.5 114
511 † 2 3/4 - 2 7/8 70-73 692 133 127 79.0 124 267 279 279 229 73.0 143
563 † 3 - 3 1/8 75-80 737 146 133 86 133 282 305 287 241 76.0 172
722 † 3 1/4 - 3 3/8 82-86 784 159 140 92 146 302 330 300 254 79.0 197
779 † 3 1/2 - 3 5/8 88-92 845 171 152 98.5 165 314 356 318 274 82.5 255
875 † 3 3/4 - 4 94-102 921 191 178 108 184 346 381 343 318 89.0 355
† Cast alloy steel.
4.5 1/4 6-7 116 12.7 39.6 22.4 9.65 17.5 39.6 57.2 12.7 46 23
04A0190 12 5/16 - 3/8 8-10 125 15.8 42.9 24.6 12.7 20.6 42.9 57.2 17.5 52.5 0.34
04A0200 20 7/16 - 1/2 11-13 140 17.5 51.0 29.5 14.2 23.9 51.0 63.5 22.4 58.7 0.68
04A0210 30.8 9/16 - 5/8 14-16 162 20.6 67.0 35.8 17.5 30.2 67.0 76.2 25.4 65 1.13
04A0220 43.5 3/4 18 194 26.9 76.2 42.2 22.4 33.3 70.0 89 31.8 77.5 1.92
04A0230 65.3 7/8 20-22 226 33.3 92.0 49.3 25.4 38.1 82.5 102 38.1 90.5 3.28
04A0240 81.6 1 24-26 254 36.6 105 58.5 28.7 44.5 95.5 114 44.5 103 4.76
04A0250 100 1 1/8 26-30 283 39.6 114 65 31.8 51 105 127 51 116 6.46
04A0260 136 1 1/4 - 1 3/8 32-35 309 41.4 127 71 38.1 58.5 119 138 56.5 129 8.95
04A0270 170 1 1/2 38 355 49.3 137 81 41.4 70.5 132 151 62.5 155 13.2
188 1 5/8 40-42 390 54.0 146 82.5 44.5 76.2 140 165 70 171 16.3
268 † 1 3/4 - 1 7/8 44-48 445 55.5 171 95.5 51 79.5 162 191 76.2 198 26
309 † 2 - 2 1/8 5054 505 62.0 194 111 57.2 95.5 187 216 82.5 224 35.8
360 † 2 1/4 - 2 3/8 56-60 546 70.0 216 127 66.8 105 210 229 92 254 47.6
424 † 2 1/2 - 2 5/8 64-67 597 79.5 241 140 74.5 114 235 248 102 270 64
549 † 2 3/4 - 2 7/8 70-73 645 79.5 273 159 79.5 124 259 279 124 286 100
656 † 3 - 3 1/8 75-80 689 85.6 292 171 86 133 292 305 133 298 125
750 † 3 1/4 - 3 3/8 82-86 743 102 311 184 92 146 311 330 146 311 142
820 † 3 1/2 - 3 5/8 88-92 787 102 330 197 98.5 165 330 356 159 330 181
1005 † 3 3/4 - 4 94-102 845 108 362 216 108 184 362 381 178 356 246
* Diameter of pin must not exceed pin used on companion 416 socket.
† Cast alloy steel.
Stock Safe working Diameter wire Length Width Pin diameter Length inside Opening Product Weight
code load rope basket inside to pin centre code each
Tons Inch A inch B inch C inch D inch E inch Kg
04A0290 0.50 1/4 1.11/16 5/8 1/2 1.1/4 5/16 51001 0.34
04A0280 0.75 5/16 1.11/16 5/8 1/2 1.1/4 3/8 51002 0.34
04A0300 1.00 3/8 2 7/8 5/8 1.11/16 15/32 51003 0.57
04A0310 1.25 7/16 2 7/8 5/8 1.11/16 17/32 51004 0.57
04A0320 2.00 1/2 2.3/8 1.1/8 13/16 2.1/16 19/32 51005 0.80
04A0330 2.25 9/16 2.3/4 1.1/4 13/16 2.1/16 21/32 51006 0.80
04A0340 3.00 5/8 2.3/4 1.1/4 15/16 2.1/2 23/32 51007 1.14
04A0350 4.25 3/4 3 1.1/2 1.1/8 2.5/8 27/32 51008 1.93
04A0360 5.50 7/8 3.3/8 1.11/16 1.1/4 3 1 51009 2.73
04A0370 7.50 1 4.1/8 1.7/8 1.1/2 3.1/2 1.1/8 51010 4.77
04A0380 9.50 1.1/8 4.1/2 2 1.5/8 4 1.1/4 51011 6.82
04A0390 11.50 1.1/4 5.1/4 2.1/8 1.7/8 4.3/8 1.3/8 51012 10.00
04A0400 14.00 1.3/8 6 2.9/16 2.1/4 4.1/2 1.9/16 51013 15.23
04A0410 16.50 1.1/2 6 2.9/16 2.1/4 4.1/2 1.11/16 51014 15.23
04A0345 19.00 1.5/8 6 2.9/16 2.1/4 4.1/2 1.11/16 51015 15.23
25.00 2 7.11/16 3.1/8 2.3/4 6.1/2 2.13/16 51017 56.00
38.00 2.1/4 9 3.3/4 3.1/2 7.1/2 2.1/2 31018 64.00
Wirelock
General: 2-component casting compound for the socketing of wire ropes in conical
end fittings. Can be used for all types of wire ropes, giving 100% breaking load effi-
ciency of the rope. Can be poured directly on site.
Follow the instruction for use. Ask CERTEX for the correct cleaning fluid.
Capacity Code Rope Ø Stay rope Breaking load Eye size Weight
tons mm mm² tons mm kg
0,5 4101 1-5 1-16 1,25 20 0,25
1,0 4102 3-9 6-35 2,5 22 0,85
1,7 4103 4-12 16-70 4,5 27 1,27
3,0 4104 6-18 50-150 7 25x38 1,83
3,5 4105 10-28 90-400 8 30x40 4
4,0 4106 20-40 240-800 9 30x40 6
Dia Length Length Length Dia Pin Length Opening Width Dia Jaw Working Product Weight
Thread Body Closed Open Inside Jaw Jaw Eye Load Code Each
Position Position Limit
a mm b mm c mm d mm e mm f mm g mm h mm i mm tons kg
6 100 175 255 5 19 7 20 13 0.20 64101B 0.16
8 108 199 282 6 25 9 24 14 0.32 64102B 0.27
10 125 222 320 8 26 10.5 28 19 0.50 64103B 0.45
12 195 320 479 10 32 13 34 22 0.70 64104B 0.85
16 230 388 572 12 39 18 42 28 1.20 64105B 1.57
20 270 454 672 16 46 20 51 33 1.50 64106B 2.67
22 295 490 730 20 55 25 55 38 2.20 64107B 3.68
24 325 558 819 22 63 30 70 46 3.20 64108B 5.30
33 370 681 977 30 85 38 82 60 4.80 64110B 12.00
39 400 710 1017 33 86 45 85 76 6.00 64111B 14.20
45 407 810 1170 39 86 48 96 80 8.50 64112B 20.80
48 407 855 1215 45 98 50 101 92 10.00 64113B 24.00
ia Thread Length Length Length Dia Length Eye Length Eye Working Product Weight
Body Closed Open Posi- Inside Inside Load Limit Code Each
Position tion
a mm b mm c mm d mm e mm f mm g mm tons kg
6* 100 165 245 5.5 11 11 0.20 64001B 0.13
8* 108 178 261 6 12 12 0.32 64002B 0.20
10 125 210 308 8.5 13 13 0.5 64003B 0.60
12 195 325 484 11 30 15 0.70 64004B 0.80
16 230 380 564 12 40 20 1.20 4005B 1.40
20 270 455 673 16 50 24 1.50 64006B 2.40
22 295 495 736 16 50 24 2.20 64007B 3.00
24 325 545 806 19 56 28 3.20 64008B 4.00
33 370 665 961 29 70 35 4.80 64010B 9.00
39 400 725 1032 34 80 40 6.00 64011B 11.50
45* 407 840 1200 30 85 40 8.50 64012B 20.80
48* 407 890 1250 37 92 44 10.00 64013B 24.00
WLL Diameter Take up Length Length Length Opening Length Diameter Thickness Diameter Weight
thread
a b c d e f g h i
tons inch inch mm Kg
2.36 3/4 6 369 487 439 24 38 16 16 41 2.59
2.36 3/4 9 444 640 514 24 38 16 16 41 3.13
2.36 3/4 12 520 792 590 24 38 16 16 41 3.42
2.36 3/4 18 670 1096 740 24 38 16 16 41 4.51
3.27 7/8 12 561 826 638 27 42 19 19 48 4.93
3.27 7/8 18 713 1132 790 27 42 19 19 48 6.41
4.54 1 6 447 554 532 31 50 22 20 54 5.18
4.54 1 12 598 859 683 31 50 22 20 54 6.43
4.54 1 18 750 1168 835 31 50 22 20 54 8.4
4.5 1 1/4 24 903 1470 988 31 50 22 20 54 8.9
6.9 1 1/4 12 641 914 748 44 71 29 26 68 11.2
6.9 1 1/4 18 803 1228 910 44 71 29 26 68 13.6
6.9 1 1/2 24 962 1539 1069 44 71 29 26 68 15
9.71 1 1/2 12 675 942 806 52 71 35 28 80 17
9.71 1 1/2 18 825 1244 956 52 71 35 28 80 19.3
9.71 1 1/2 24 980 1551 1111 52 71 35 28 80 20.7
12.7 1 3/4 18 938 1316 1092 60 86 41 33 90 25
12.7 1 3/4 24 1089 1621 1243 60 86 41 33 90 28.7
16.8 2 24 1151 1671 1338 63 93 51 40 107 45.4
27.2 2 1/2 24 1255 1831 1480 75 114 57 41 143 88
34 2 3/4 24 1348 1882 1604 90 110 70 41 158 98
Ends can be combined, but with the exception of hooks that are provided up to 1” only. Please contact us for further information.
WLL Diameter Take Length Length Length Opening Length Diameter Thickness Diameter Weight
thread up closed open closed jaw inside pin jaw eye jaw eye each
position position position
a b c d e f g h i
tons inch inch mm Kg
0.54 3/8 6 273 409 304 12 21 7 9 21 0.55
1 1/2 6 304 435 343 16 26 10 11 25 0.96
1 1/2 9 379 588 418 16 26 10 11 25 1.18
1 1/2 12 455 740 494 16 26 10 11 25 1.50
1.59 5/8 6 346 469 406 18 32 13 14 33 1.75
1.59 5/8 9 421 622 480 18 32 13 14 33 2.14
1.59 5/8 12 498 774 557 18 32 13 14 33 2.43
2.36 3/4 6 369 00487 439 24 38 16 16 41 2.7
2.36 3/4 9 444 640 514 24 38 16 16 41 3.23
2.36 3/4 12 520 792 590 24 38 16 16 41 3.57
2.36 3/4 18 670 1096 740 24 38 16 16 41 4.55
3.27 7/8 12 561 826 638 27 42 19 19 48 5.22
3.27 7/8 18 713 1132 790 27 42 19 19 48 6.56
4.54 1 6 447 554 532 31 50 22 20 54 5.54
4.54 1 12 598 859 683 31 50 22 20 54 6.96
4.54 1 18 750 1168 835 31 50 22 20 54 8.4
4.5 1 24 903 1470 988 31 50 22 20 54 8.9
6.9 1 1/4 12 643 916 748 44 71 28 26 68 11.9
6.9 1 1/4 18 805 1230 910 44 71 28 26 68 13.6
6.9 1 1/4 24 964 1541 1069 44 71 28 26 68 14.2
9.71 1 1/2 12 675 942 806 52 71 35 28 80 18.5
9.71 1 1/2 18 825 1244 956 52 71 35 28 80 19.3
9.71 1 1/2 24 980 1551 1111 52 71 35 28 80 22
12.7 1 3/4 18 938 1316 1092 60 86 41 33 90 30
12.7 1 3/4 24 1089 1621 1243 60 86 41 33 90 33
16.8 2 24 1153 1673 1338 63 93 50 40 107 50
27.2 2 1/2 24 1255 1831 1480 75 114 57 41 143 92
34 2 3/4 24 1348 1882 1604 90 110 70 41 158 109
Ends can be combined, but with the exception of hooks that are provided up to 1” only. Please contact us for further information.
WLL Diameter Take up Length Length Length Diameter Witdh Length Length Weight
thread closed open position inside inside closed each
position position
a b c d e f g h
tons inch mm Kg
0.54 3/8 6 292 428 183 10 13 29 49 0.48
1 1/2 6 325 455 193 12 18 36 58 0.81
1 1/2 9 400 608 270 12 18 36 57 1.07
1 1/2 12 476 760 346 12 18 36 57 1.29
1.59 5/8 6 380 503 203 14 21 45 79 1.33
1.59 5/8 9 455 656 280 14 21 45 78 1.61
1.59 5/8 12 531 808 356 14 21 45 78 1.96
2.36 3/4 6 413 532 214 17 26 54 89 2.03
2.36 3/4 9 490 685 291 17 26 54 89 2.47
2.36 3/4 12 564 837 367 17 26 54 88 2.9
2.36 3/4 18 718 1143 519 17 26 54 89 3.94
3.27 7/8 12 604 870 377 20 32 61 101 4.31
3.27 7/8 18 756 1174 529 20 32 61 101 5.51
4.54 1 6 498 604 234 24 37 76 118 4.35
4.54 1 12 649 909 387 24 37 76 117 5.75
4.54 1 18 801 1215 539 24 37 76 117 7.27
4.5 1 24 952 1518 692 24 37 76 116 7.52
6.9 1 1/4 12 712 985 385 29 47 91 145 9.28
6.9 1 1/4 18 862 1287 537 29 47 91 144 11.1
6.9 1 1/4 24 1015 1592 690 29 47 91 144 12.1
9.71 1 1/2 12 756 1023 401 32 55 106 156 14.2
9.71 1 1/2 18 916 1335 553 32 55 106 160 15.8
9.71 1 1/2 24 1065 1636 706 32 55 106 158 17.1
12.7 1 3/4 18 1020 1396 577 38 61 120 197 23.1
12.7 1 3/4 24 1171 1703 730 38 61 120 196 26.3
16.8 2 24 1264 1784 748 46 69 147 230 40.7
27.2 2 1/2 24 1430 1934 802 51 80 165 274 64
34 2 3/4 24 1450 1988 802 57 84 178 284 88
Ends can be combined, but with the exception of hooks that are provided up to 1” only. Please contact us for further information.
WLL Diameter Take up Length Length Thickness Thickness Opening Length Weight
thread closed open hook hook hook closed each
position position position
a b c d e f g
tons inch mm Kg
0.54 3/8 6 278 415 13 16 15 42 0.53
1 1/2 6 305 434 16 22 16 48 0.93
1 1/2 9 380 587 16 22 16 47 1.16
0.68 1/2 12 456 739 13 19 16 47 1.34
1.02 5/8 6 356 479 16 23 21 67 0.98
1.59 5/8 9 431 632 20 24 21 66 1.96
1.02 5/8 12 507 784 16 23 21 66 1.71
2.36 3/4 6 393 511 22 27 24 79 1.53
1.36 3/4 9 468 664 20 27 24 78 1.88
2.36 3/4 12 544 816 22 27 24 78 3.27
2.36 3/4 18 696 1122 22 27 24 78 4.5
2.27 1 6 479 586 26 35 31 109 3.87
4.54 1 12 625 886 26 35 31 106 6.64
2.27 1 18 778 1191 26 35 31 106 6
2.27 1 24 928 1495 26 35 31 105 7.52
Ends can be combined, but with the exception of hooks that are provided up to 1” only. Please contact us for further information.
Snatch Blocks
Snatch Block
"Heavy duty" lightweight. With swivel hook or shackle. With ball bearing. Standard
painted. Can be delivered galvanized or stainless on request. Customized blocks
available. Also available in 2-sheaved.
WLL ton SF: 4:1 Sheave dia Sheave dia Wire rope dia Weight
tons mm inches inches kg
2 76* 3,0 7-9 4,0
4 114* 4,5 10-12 5,3
4 152* 6,0 12-14 6,5
4 203* 8,0 10-12 8,3
8 152 6,0 20-22 12,5
8 203 8,0 20-22 15,5
8 254 10,0 20-22 19,5
8 305 12,0 20-22 24,0
8 357 14,0 20-22 32,0
8 406 16,0 20-22 36,0
8 458 18,0 20-22 41,0
12 152 6,0 20-22 25,0
12 203 8,0 20-22 27,5
12 254 10,0 20-22 30,0
12 305 12,0 20-22 32,8
12 357 14,0 20-22 35,0
12 406 16,0 20-22 38,0
12 458 18,0 20-22 44,0
15 152 6,0 20-22 25,0
15 203 8,0 20-22 28,0
15 254 10,0 20-22 30,0
15 305 12,0 20-22 33,0
15 357 14,0 20-22 36,0
15 406 16,0 20-22 39,0
15 458 18,0 20-22 44,5
22 203 8,0 28-30 62,0
22 254 10,0 28-30 73,0
22 305 12,0 28-30 90,0
22 357 14,0 28-30 96,0
22 406 16,0 28-30 104
22 458 18,0 28-30 114
30 203* 8,0 28-30 98,0
30 254* 10,0 28-30 105
30 305 12,0 28-30 120
30 357 14,0 28-30 155
30 406 16,0 32-35 192
30 458 18,0 32-35 231
d1
Sheave Block, Single
General: Sheave block, single-spindled.
E L
Material: Spindle made from nylon. Frame cast alloy.
d2
Code Rope Ø d2 d1 L
mm mm mm mm
PYLYK5 5 15 10 50
PYLYK6 6 20 11 60
PYLYK7 7 25 12 70
PYLYK8 8 30 13 80
PYLYK9 9 40 14 93
PYLYK12 12 50 16 115
d2
Code Rope Ø d2 d1 L
mm mm mm mm
PYLKK5 5 15 10 50
PYLKK6 6 20 11 60
PYLKK7 7 25 12 70
PYLKK8 8 30 13 80
PYLKK9 9 40 14 93
PYLKK12 12 50 16 117
Meet other critical performance requirements including fatigue life and material .
traceability, not addressed by ASME B30.26.
Stock No Sheave Diameter Bearing Code Wireline WLL Weight Each (kg) Rep. Sheave Stock No. Rep Latch Stock No.
mm mm t
102016 76.0 BB 8-10 2 2.04 460147 1096421
102025 114 BB 10-13 4 5.31 2000232 1096468
102098 152 BB 16-19 8 12.2 460815 1096562
102114 152 RB 16-19 8 12.2 472688 1096562
102169 203 BB 16-19 8 15.0 461164 1096562
102487 203 RB 16-19 8 15.0 473277 1096562
102230 254 BB 16-19 8 18.6 461805 1096562
102258 254 RB 16-19 8 18.6 473776 1096562
178890 305 BB 16 8 21.8 462270 1096562
178934 305 RB 16 8 21.8 474141 1096562
102301 305 BB 19 8 21.8 462289 1096562
102329 305 RB 19 8 21.8 474150 1096562
Meet other critical performance requirements including fatigue life and material .
traceability, not addressed by ASME B30.26.
Sheave Bearing Stock no. Wireline Working Weight each Rep. sheave Rep latch
diameter code size load limit stock no. stock no.
mm 408 with 409 with mm t* 408 with 409 with
hook shackle hook shackle
114 BB 104023 105022 10-13 4 8.16 8.16 2000232 1096468
152 BB 104103 105102 16-19 12 20.4 22.7 460815 1096609
152 RB 104121 105120 16-19 12 20.4 22.7 472688 1096609
203 BB 104185 105184 16-19 12 24.0 26.3 461164 1096609
203 RB 104201 105200 16-19 12 24.0 26.3 473277 1096609
254 BB 104265 105264 16-19 12 31.8 34.0 461805 1096609
254 RB 104283 105282 16-19 12 31.8 34.0 473776 1096609
305 BB 194578 195185 16 12 40.8 43.1 462270 1096609
305 RB 168044 195229 16 12 40.8 43.1 474141 1096609
305 BB 104345 105344 19 12 40.8 43.1 462289 1096609
305 RB 104363 105362 19 12 40.8 43.1 474150 1096609
356 BB 194621 195247 16 12 45.4 47.6 463625 1096609
356 RB 194649 195265 16 12 45.4 47.6 474766 1096609
356 BB 104425 105424 19 12 45.4 47.6 463634 1096609
356 RB 104443 105442 19 12 45.4 47.6 474775 1096609
* Ultimate Load is 4 times the Working Load Limit. † Available in Bronze Bushed only. ‡ May be furnished in other Wireline sizes.
Sheave Bearing Stock no. Wireline Working load limit Weight each kg
diameter code size
mm 432 with hook 433 with shackle mm ‡ t* 432 with hook 433 with shackle
203 BB 209624 209811 26 20 48 53
RB 209642 209839
203 BB 122021 123020 28 20 48 53
RB 122049 123048
254 BB 209660 209857 26 20 55 61
RB 209697 209884
254 BB 122094 123093 28 20 55 61
RB 122110 123119
305 BB 209722 209919 26 20 64 69
RB 209740 209937
Sheave Bearing Stock no. Wireline Working load Weight each Rep. sheave Rep latch
diameter code size limit stock no. stock no.
mm 408 with 409 with mm t* 408 with 409 with
hook shackle hook shackle
114 BB 104023 105022 10-13 4 8.16 8.16 2000232 1096468
152 BB 104103 105102 16-19 12 20.4 22.7 460815 1096609
152 RB 104121 105120 16-19 12 20.4 22.7 472688 1096609
203 BB 104185 105184 16-19 12 24.0 26.3 461164 1096609
203 RB 104201 105200 16-19 12 24.0 26.3 473277 1096609
254 BB 104265 105264 16-19 12 31.8 34.0 461805 1096609
254 RB 104283 105282 16-19 12 31.8 34.0 473776 1096609
305 BB 194578 195185 16 12 40.8 43.1 462270 1096609
305 RB 168044 195229 16 12 40.8 43.1 474141 1096609
305 BB 104345 105344 19 12 40.8 43.1 462289 1096609
305 RB 104363 105362 19 12 40.8 43.1 474150 1096609
356 BB 194621 195247 16 12 45.4 47.6 463625 1096609
356 RB 194649 195265 16 12 45.4 47.6 474766 1096609
356 BB 104425 105424 19 12 45.4 47.6 463634 1096609
356 RB 104443 105442 19 12 45.4 47.6 474775 1096609
* Ultimate Load is 4 times the Working Load Limit. † Available in Bronze Bushed only. ‡ May be furnished in other Wireline sizes.
Sheave Bearing code Stock no. Wireline size Working load Weight each kg
diameter limit
mm 432 with hook 433 with shackle mm ‡ t* 432 with hook 433 with shackle
203 BB 209624 209811 26 20 48 53
RB 209642 209839
* Ultimate Load is 4 times the Working Load Limit. † Available in Bronze Bushed only. ‡ May be furnished in other Wireline sizes.
Sheave Bearing Stock no. Wire rope Working load limit Weight each kg Rep. sheave stock no. Rep. latch stock no.
diameter code size
mm 420 with hook mm † t* 420 with hook
152 BB 169374 19-22 12 18.1 460940 1096609
152 RB 169392 19-22 12 18.1 473035 1096609
203 BB 169418 19-22 15 23.1 461360 1096609
203 RB 169445 19-22 15 23.1 473534 1096609
254 BB 110221 19-22 15 28.6 462001 1096609
254 RB 110258 19-22 15 28.6 474025 1096609
Sheave diameter bearing code stock no. wire rope size working load limit weight each kg rep. sheave rep. latch
stock no. stock no.
mm 406 tail board mm † t* 406 tail board
152 BB 167973 19-22 12 10.9 460940 1096609
152 RB 167982 19-22 12 10.9 473035 1096609
203 BB 167991 19-22 15 13.6 461360 1096609
203 RB 168008 19-22 15 13.6 473534 1096609
254 BB 103186 19-22 15 19.1 462001 1096609
254 RB 103202 19-22 15 19.1 474025 1096609
Brilube 30
A semi-dry film lubricant with excellent penetration and corrosion properties.
Type Volumen
Brilube 30 400 ml.
Brilube 30 5 ltr.
Brilube 30 20 ltr.
Brilube 40
Synthetic lubricant which deposits a slip-resistant film on the wire surfaces.
Type Volumen
Brilube 40 20 ltr.
Brilube 60
Gel lubricant with excellent corrosion protection and stable properties over a wide temperature range.
Type Volumen
Brilube 60 12,5 kg
Brilube 60 50 kg
Brilube 60 180 kg
Brilube 70
Gel lubricant with stable properties over a wide temperature range and excellent corrosion protection against marine working conditions.
Type Volumen
Brilube 70 12,5 kg
Brilube 70 50 kg
Brilube 70 180 kg
Brilube 90
Biodegradable gel lubricant developed by BRIDON to meet the needs of wire rope working in highly aggressive conditions and the
demand for environmental acceptability.
Type Volumen
Brilube 90 12,5 kg
Brilube 90 50 kg
Brilube 90 180 kg
Model Size
kg
Biogen wireshield pail 18
Biogen wireshield barrel 160