Professional Documents
Culture Documents
Eng0003 DL DV Ecupdf PDF
Eng0003 DL DV Ecupdf PDF
Doos
oosaan Common
Commo n Rail
Rail Engi
ngine
ne
Feb, 2009
Overseas Product Support Team
Text No. ENG0003
3. ECU
1
DL06 Engine
2
DL06 ECU
3
DL06 ECU pin connector
Injector co nnector
4
DL06 ECU Control (3)
Coolant Temp
Fuel Temp ECU Air heater
Air Temp
4) Limp home
LCD Panel X
ECU 1,000 RPM
EPOS X
10
DL06 ECU Control (4)
5) Emergency st op
Engine runn ing sig nal
Emergency
engine stop signal ECU Cut Fuel Injection
11
DL06 ECU (Tightening order & torque)
Tightening ⑧ ①
order
⑤
② ⑦
Please keep the tightening order of ECU mounting bolts in order to insure
the perfect contact of ECU and cooling plate.
12
DL08 / DV11 ECU ( Tightening order & torque)
23
Before electric welding on machine
Remember t his……
- Before welding on th e machine the ECU must be disconnect, if the ECU is not discon nected
a serio us failure to the ECU may occur .
- Before you c onnect or di sconnect t he wirin g harness of t he ECU THE NEGATIVE BATTERY
CABLE ON THE BATTERY MUST BE DISCONNECTED.
24