Professional Documents
Culture Documents
User Manual
Page i
Rev. 1.00 – December 18, 2018
RAID 5 and RAID 10 Setup in Windows 10
Revision
Date Version Changes
Page ii
RAID 5 and RAID 10 Setup in Windows 10
Copyright
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.
Page iii
RAID 5 and RAID 10 Setup in Windows 10
Table of Contents
1 RAID 5 SETUP IN WINDOWS 10............................................................................... 1
Page iv
RAID 5 and RAID 10 Setup in Windows 10
Chapter
1
1 RAID 5 Setup in
Windows 10
Page 1
RAID 5 and RAID 10 Setup in Windows 10
Page 2
RAID 5 and RAID 10 Setup in Windows 10
Page 3
RAID 5 and RAID 10 Setup in Windows 10
Page 4
RAID 5 and RAID 10 Setup in Windows 10
Page 5
RAID 5 and RAID 10 Setup in Windows 10
Step 7: The result after successful creation of storage space RAID 5 will be shown.
Page 6
RAID 5 and RAID 10 Setup in Windows 10
Page 7
RAID 5 and RAID 10 Setup in Windows 10
Chapter
2
2 RAID 10 Setup in
Windows 10
Page 8
RAID 5 and RAID 10 Setup in Windows 10
Page 9
RAID 5 and RAID 10 Setup in Windows 10
Page 10
RAID 5 and RAID 10 Setup in Windows 10
Step 3: Select two drives and click “Create pool” for the first RADI 1 (mirror):
Page 11
RAID 5 and RAID 10 Setup in Windows 10
Step 5: Label the new storage space as something like Mirror1 so you can find it later.
Page 12
RAID 5 and RAID 10 Setup in Windows 10
Step 7: The result after successful creation of storage space Mirror1 will be shown:
Page 13
RAID 5 and RAID 10 Setup in Windows 10
Step 8: Now click “Create a new pool and storage space” to create the second RAID 1:
Page 14
RAID 5 and RAID 10 Setup in Windows 10
Step 9: Repeat the steps with the remaining two drives to create Mirror2:
Page 15
RAID 5 and RAID 10 Setup in Windows 10
Step 10: To combine these two RAID 1 arrays (Mirror1 & Mirror2) into a RAID 0 array, we use
Page 16
RAID 5 and RAID 10 Setup in Windows 10
Page 17
RAID 5 and RAID 10 Setup in Windows 10
Page 18
RAID 5 and RAID 10 Setup in Windows 10
Page 19
RAID 5 and RAID 10 Setup in Windows 10
Step 15: Right click on either one of RAID 1 disk and select “New Stripped Volume”
Page 20
RAID 5 and RAID 10 Setup in Windows 10
Page 21
RAID 5 and RAID 10 Setup in Windows 10
Page 22
RAID 5 and RAID 10 Setup in Windows 10
Page 23
RAID 5 and RAID 10 Setup in Windows 10
Page 24
RAID 5 and RAID 10 Setup in Windows 10
Page 25
RAID 5 and RAID 10 Setup in Windows 10
Page 26
RAID 5 and RAID 10 Setup in Windows 10
Page 27