Professional Documents
Culture Documents
Lay-In Wireway Type 1 Screw Cover ........................................................................................................................................................................................ 8-14 Cable & Wire Management
Lay-In Wireway Type 1 Quick-Connect Hinge Cover ............................................................................................................................................... 15-20
Lay-In Wireway Type 3R EnviroShield™ ............................................................................................................................................................................. 21-24
Lay-In Wireway Type 12 ..................................................................................................................................................................................................................... 25-31
Feed-Through Wireway Type 12 ................................................................................................................................................................................................. 32-35
Feed-Through Wireway Type 4X ................................................................................................................................................................................................ 36-39
Wiring Trough Type 1 Screw Cover ......................................................................................................................................................................................... 40-41
Wiring Trough Type 3R Screw Cover ..................................................................................................................................................................................... 42-43
Wiring Trough Type 12 Lift-Off Cover ..................................................................................................................................................................................... 44-45
Wiring Trough Type 4X Lift-Off Cover ..................................................................................................................................................................................... 46-47
Application Construction
• Houses runs of control and power cable • Wireway body and cover are fabricated from code gauge steel
• Used for cable and wire junction, distribution and or galvanized steel, (see table, pages 9 & 10)
termination • Wireway body has mounting holes on the back
• Wireway is available with or without knockouts
Standards • Wireway fittings have no knockouts, ends are available with or
• UL 870 listed, Type 1 without knockouts
• CSA C22.2 No. 26 certified, Type 1 • Cover is secured to the body with plated screws
• Conforms to NEMA standard for Type 1 • Keyhole slots are furnished on the wireway cover which allow
easy access to the inside without removing the screws
• Wireway exceeding 72 inches in length has two overlapping
Finish
covers
• Wash and phosphate undercoat or galvanized steel
• Variety of fittings allow runs which can change direction,
• ANSI 61 gray acrylic electrocoat finish
junction and terminate
• Standard wireway connectors (sold separately) have a
Accessories gate feature which can swing completely open allowing for
• Sealing devices lay-in of wire and cable
• Touch-up paint • Interchangeable with Type 1 Hinge Cover Wireway and
• See Accessories section Fittings when HSCA connector is used, (see page 17)
Discount Schedule: A2
Subclass: AK1 (painted) & Z40 (galvanized)
Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
Eaton 8 B-Line series electrical enclosures
Cable & Wire Management
Lay-In Wireway
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B-Line series electrical enclosures 9 Eaton
Cable & Wire Management
Lay-In Wireway
Cable & Wire Management
C
Wireway Section
C-4.00 Lengths from 12.00” (305 mm)
(102)
to 120.00” (3048 mm).
Wireway exceeding 72.00”
(1829 mm) has two covers.
Shown with KO’s, also
A D available without.
B 1.25
(32)
Knockout sizes:
J J J
1.56 H H H = 3/4” or 1/2” conduit
(40)
J = 11/4” or 1” conduit
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Eaton 10 B-Line series electrical enclosures
Cable & Wire Management
Lay-In Wireway
C
Telescopic Fitting End
Adjustable length up to Used to terminate wireway or fitting.
10.00” (254 mm). Wraps 2.50” x 2.50” (64 mm x 64 mm)
A around the two near through 8.00” x 8.00” (203 mm x
joining wireway lengths to A 203 mm) ends have a 1.50”-1.25”
achieve a continuous run. concentric 2-way KO. 10.00” x
10.00” (254 mm x 254 mm) ends
B1
and larger have a 3.00” - 2.50”
B concentric 2-way KO for terminating
B2 on pipe or conduit. Also available
Telescopic Fitting without KO.
Catalog Number A B1 B2 C
Painted Galvanized in. mm in. mm in. mm in. mm
End
22 FTF 22 FTFGV 2.75 70 1.75 44 1.12 28 12.00 305 Catalog Number A B
Painted Galvanized
33 FTF -- 3.25 83 2.25 57 1.12 28 12.00 305 KO No KO KO No KO in. mm in. mm
44 FTF 44 FTFGV 4.25 108 3.25 83 1.12 28 12.00 305
22 E 22 E NK 22 EGV 22 EGV NK 2.50 64 2.50 64
64 FTF -- 6.25 159 3.25 83 1.12 28 12.00 305
33 E 33 E NK -- -- 3.00 76 3.00 76
66 FTF 66 FTFGV 6.25 159 5.25 133 1.12 28 12.00 305
44 E 44 E NK 44 EGV 44 EGV NK 4.00 102 4.00 102
88 FTF 88 FTFGV 8.25 210 7.25 184 1.12 28 12.00 305
64 E 64 E NK -- -- 6.00 152 4.00 102
1010 FTF 1010 FTFGV 10.25 260 9.25 235 1.12 28 12.00 305
66 E 66 E NK 66 EGV 66 EGV NK 6.00 152 6.00 152
1212 FTF 1212 FTFGV 12.25 311 11.25 286 1.12 28 12.00 305
88 E 88 E NK 88 EGV 88 EGV NK 8.00 203 8.00 203
1010 E 1010 E NK 1010 EGV 1010 EGV NK 10.00 254 10.00 254
1212 E 1212 E NK 1212 EGV 1212 EGV NK 12.00 305 12.00 305
See drawing for KO sizes.
F
A Wireway End Flange
E
Allows for a secure
connection of wireway Connector
A
to an adjoining Swing gate allows
B enclosure or wall. for lay-in of wire
and cable.
B
Wireway End Flange
Catalog Number A B E F
Painted Galvanized in. mm in. mm in. mm in. mm Connector
22 GF 22 GFGV 2.50 64 2.50 64 4.00 102 4.00 102 Catalog Number A B
Galvanized in. mm in. mm
33 GF -- 3.00 76 3.00 76 4.50 114 4.50 114
22 C 2.50 64 2.50 64
44 GF 44 GFGV 4.00 102 4.00 102 5.50 140 5.50 140
33 C 3.00 76 3.00 76
64 GF -- 6.00 152 4.00 102 7.50 191 5.50 140
44 C 4.00 102 4.00 102
66 GF 66 GFGV 6.00 152 6.00 152 7.50 191 7.50 191
64 C 6.00 152 4.00 102
88 GF 88 GFGV 8.00 203 8.00 203 9.50 241 9.50 241
66 C 6.00 152 6.00 152
1010 GF 1010 GFGV 10.00 254 10.00 254 11.50 292 11.50 292
88 C 8.00 203 8.00 203
1212 GF 1212 GFGV 12.00 305 12.00 305 13.50 343 13.50 343
1010 C 10.00 254 10.00 254
1212 C 12.00 305 12.00 305
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B-Line series electrical enclosures 11 Eaton
Cable & Wire Management
Lay-In Wireway
Cable & Wire Management
C
A
Barrier, Bolt-On
Reducer For those installations that require separated wiring
B dimensions (see catalog table), correspond to the large compartments.
end opening. Used to reduce or enlarge wireway runs.
Wireway Hangers
∅ .45
∅ .25
K
K
C C
G
90° Elbow-Tee-Cross
G
Designed for left or right
90° turns or as a tee or
J H
(shipped cross by removing closure
B
unassembled)* plates. Includes two (2)
closure plates and
A hardware.
Side Cover Assembly Top Cover Assembly
For those installations where the For those installations where the
wireway cover must be removed wireway cover must be removed
90° Elbow - Tee - Cross
from the side. from the top. Catalog Number A B C
Painted Galvanized in. mm in. mm in. mm
22 LTX 22 LTXGV 2.50 64 2.50 64 4.50 114
Wireway Hanger
33 LTX -- 3.00 76 3.00 76 5.00 127
Catalog Number G H J K 44 LTX 44 LTXGV 4.00 102 4.00 102 6.00 152
Painted Galvanized in. mm in. mm in. mm in. mm
64 LTX -- 6.00 152 4.00 102 8.00 203
22 FH -- 8.50 216 6.50 165 6.50 165 2.87 73
66 LTX 66 LTXGV 6.00 152 6.00 152 8.00 203
33 FH -- 10.50 267 8.50 216 9.00 229 3.87 98
88 LTX 88 LTXGV 8.00 203 8.00 203 10.00 254
44 FH -- 12.50 318 10.50 267 10.37 263 4.87 124
1010 LTX 1010 LTXGV 10.00 254 10.00 254 12.00 305
66 FH -- 16.50 419 14.50 368 13.50 343 5.87 149
1212 LTX 1212 LTXGV 12.00 305 12.00 305 14.00 356
88 FH -- 20.50 521 18.50 470 16.75 425 6.87 174
1010 FH* -- 24.50 622 22.50 572 19.75 502 7.87 200
1212 FH* -- 28.50 724 26.50 673 22.75 578 8.87 225
*Hangers are shipped welded in the top cover assembly position.
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Eaton 12 B-Line series electrical enclosures
Cable & Wire Management
Lay-In Wireway
F 88 L COMBO 88 L COMBOGV 8.00 203 8.00 203 12.09 307 8.00 203 8.00 203
Combo Opening
1010 L COMBO 1010 L COMBOGV 10.00 254 10.00 254 14.09 358 9.00 229 9.00 229
Specially designed for
1212 L COMBO 1212 L COMBOGV 12.00 305 12.00 305 16.09 409 10.00 254 10.00 254
removing either the inside or
C outside cover to allow a 22 L SIDE -- 2.50 64 2.50 64 5.59 142 4.28 109 4.28 109
continuous run with 90˚ turns. 33 L SIDE -- 3.00 76 3.00 76 6.09 155 4.50 114 4.50 114
44 L SIDE -- 4.00 102 4.00 102 7.09 180 5.00 127 5.00 127
64 L SIDE -- 6.00 152 4.00 102 10.09 256 7.00 178 7.00 178
B C C 66 L SIDE -- 6.00 152 6.00 152 10.09 256 7.00 178 7.00 178
88 L SIDE -- 8.00 203 8.00 203 12.09 307 8.00 203 8.00 203
1010 L SIDE -- 10.00 254 10.00 254 14.09 358 10.00 254 9.00 229
A B 1212 L SIDE -- 12.00 305 12.00 305 16.09 409 10.00 254 10.00 254
22 L SWEEP 22 L SWEEPGV 2.50 64 2.50 64 5.63 143 4.25 108 4.25 108
Side Opening 33 L SWEEP -- 3.00 76 3.00 76 8.41 214 6.84 174 6.84 174
Side cover is removable to 44 L SWEEP 44 L SWEEPGV 4.00 102 4.00 102 9.41 239 7.34 186 7.34 186
A
allow a continuous run on 64 L SWEEP -- 6.00 152 4.00 102 11.41 290 8.34 212 8.34 212
designs with 90˚ turns. Sweep Elbow 66 L SWEEP 66 L SWEEPGV 6.00 152 6.00 152 11.41 290 8.34 212 8.34 212
Side cover design with a 88 L SWEEP 88 L SWEEPGV 8.00 203 8.00 203 13.41 341 9.34 237 9.34 237
larger radius for 90° 1010 L SWEEP 1010 L SWEEPGV 10.00 254 10.00 254 15.41 391 10.34 263 10.34 263
sweeping turns. 1212 L SWEEP 1212 L SWEEPGV 12.00 305 12.00 305 17.41 442 11.34 288 11.34 288
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B-Line series electrical enclosures 13 Eaton
Cable & Wire Management
Lay-In Wireway
Cable & Wire Management
Tee
Side cover design where a “T” Tee
junction is necessary. Catalog Number A B E F
Painted Galvanized in. mm in. mm in. mm in. mm
22 T 22 TGV 2.50 64 2.50 64 4.25 108 4.25 108
33 T -- 3.00 76 3.00 76 4.50 114 4.50 114
B 44 T 44 TGV 4.00 102 4.00 102 5.00 127 5.00 127
E
64 T -- 6.00 153 4.00 102 7.00 178 7.00 178
66 T 66 TGV 6.00 153 6.00 153 7.00 178 7.00 178
F F 88 T 88 TGV 8.00 203 8.00 203 8.00 203 8.00 203
A 1010 T 1010 TGV 10.00 254 10.00 254 9.00 229 9.00 229
1212 T 1212 TGV 12.00 305 12.00 305 10.00 254 10.00 254
Cross
Side cover and broad body design to
junction cable run in four directions.
Cross
.75 Catalog Number A B E F
(19) Painted Galvanized in. mm in. mm in. mm in. mm
22 X 22 XGV 2.50 64 2.50 64 4.25 108 4.25 108
B 33 X -- 3.00 76 3.00 76 5.62 143 5.62 143
44 X 44 XGV 4.00 102 4.00 102 6.12 155 6.12 155
E 64 X -- 6.00 152 4.00 152 7.12 181 7.12 181
A 66 X 66 XGV 6.00 152 6.00 152 7.12 181 7.12 181
88 X 88 XGV 8.00 203 8.00 203 8.12 206 8.12 206
1010 X 1010 XGV 10.00 254 10.00 254 9.12 232 9.12 232
E 1212 X 1212 XGV 12.00 305 12.00 305 10.12 257 10.12 25
.75
(19)
F F
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Eaton 14 B-Line series electrical enclosures
Cable & Wire Management
Lay-In Wireway
Pre-installed
Reversible and hardware on quick
removable hinge connector
cover
Application Construction
• Houses runs of control and power cable • Wireway body and cover are fabricated from code gauge steel,
• Used for cable and wire junction, distribution and (see table, page 16)
termination • Wireway body has mounting holes on the back
• Wireway is available with or without knockouts
Standards • Wireway fittings have no knockouts, ends are available with or
• UL 870 listed, Type 1 without knockouts
• CSA C22.2 No. 26 certified, Type 1 • Wireway exceeding 72 inches in length has two overlapping
• Conforms to NEMA standard for Type 1 covers
• Variety of fittings allow runs which can change directions,
Finish junction and terminate
• Wash and phosphate undercoat • Wireway connectors (sold separately) have a gate feature
• ANSI 61 gray acrylic electrocoat finish which can swing completely open allowing for lay-in of wire
and cable
Accessories • Universal style connectors are also available for adapting to
• Touch-up paint other manufacturer’s wireway, (see page 17)
• See Accessories section • Except for wireway ends, completely interchangeable with
Type 1 screw cover wireway and fittings through use of the
adapter style connector HSCA, (see page 17)
Protected by U.S. Patents 7,525,044 &
Discount Schedule: A2
7,762,042
Subclass: HS1
Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
B-Line series electrical enclosures 15 Eaton
Cable & Wire Management
Lay-In Wireway
Cable & Wire Management
C
C - 4.00” Wireway Section
Lengths from 12.00” (305 mm) to
120.00” (305 mm). Wireway
A D Wireway Cover exceeding 72.00” (1829 mm) has
two covers. Shown with KO's,
also available without.
cover screw mounting hole
Knockout sizes:
J J J J
B 1.25” H H H H = 3/4” or 1/2” conduit
J = 11/4” or 1” conduit
3.00” 3.00”
1.56” 3.00” typ. typ. Wireway Side
spacing spacing
Notes: Additional mounting holes are furnished when C dimension is over 60.00" (1524 mm).
Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Eaton 16 B-Line series electrical enclosures
Cable & Wire Management
Lay-In Wireway
Reducer
C
B dimensions (see catalog
Telescopic Fitting table), correspond to the large
Adjustable length up to B
A C end opening. Used to reduce or
10.00” (254 mm). Wraps enlarge wireway runs.
around the two near joining Removable cover is secured
wireway lengths to achieve A
with screws.
B1 a continuous run.
B2
A
B A
Telescopic Fitting
Catalog Number A B1 B2 C
in. mm in. mm in. mm in. mm
22 FTF 2.75 70 1.75 44 1.12 28 12.00 305 C
33FTF 3.25 83 2.25 57 1.12 28 12.00 305
44 FTF 4.25 108 3.25 83 1.12 28 12.00 305 Reducer
66 FTF 6.25 159 5.25 133 1.12 28 12.00 305 Catalog Number A B C
88 FTF 8.25 210 7.25 184 1.12 28 12.00 305 in. mm in. mm in. mm
1010 FTF 10.25 260 9.25 235 1.12 28 12.00 305 2233 FR * 2.50 63 3.00 76 6.00 152
1212 FTF 12.25 311 11.25 286 1.12 28 12.00 305 3344 FR * 3.00 76 4.00 102 8.00 203
4466 FR * 4.00 102 6.00 152 10.00 254
6688 FR * 6.00 152 8.00 203 12.00 305
881010 FR * 8.00 203 10.00 254 12.00 305
10101212 FR * 10.00 254 12.00 305 16.00 406
A A A
A End
Used to terminate
wireway or fitting.
B B B Shown with KO, also
available without.
B
Connector
Swing gate allows for lay-in of wire Drawing shows screws in place.
and cable. Screws are actually packaged in
plastic bags.
Connector End
Catalog Number A B
Catalog Number A B KO
Connector Style Adapter Style Universal Style in. mm in. mm
KO No KO in. mm in. mm in. mm
22 HSC 22 HSCA 22 HSCU 2.50 63 2.50 63
22 HSE 22 HSE NK 2.50 63 2.50 63 1.50 38
44 HSC 44 HSCA 44 HSCU 4.00 102 4.00 102
44 HSE 44 HSE NK 4.00 102 4.00 102 1.50 38
66 HSC 66 HSCA 66 HSCU 6.00 152 6.00 152
66 HSE 66 HSE NK 6.00 152 6.00 152 1.50 38
88 HSC 88 HSCA 88 HSCU 8.00 203 8.00 203
88 HSE 88 HSE NK 8.00 203 8.00 203 1.50 38
1010 HSC 1010 HSCA 1010 HSCU 10.00 254 10.00 254
1010 HSE 1010 HSE NK 10.00 254 10.00 254 3.00 76
1212 HSC 1212 HSCA 1212 HSCU 12.00 305 12.00 305
1212 HSE 1212 HSE NK 12.00 305 12.00 305 3.00 76
HSC - Standard Quick Connector
HSCA - For adapting to Type 1 Screw Cover Wireway
HSCU - For adapting to competitive Wireway
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B-Line series electrical enclosures 17 Eaton
Cable & Wire Management
Lay-In Wireway
Cable & Wire Management
J (shipped H
B unassembled)
.875
(22)
H
.875
(22)
Barrier, Bolt-On
For those installations that require separate wiring
compartments.
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Eaton 18 B-Line series electrical enclosures
Cable & Wire Management
Lay-In Wireway
.75
E E (19)
Outside Opening
Specifically designed to have the
outside covers hinge open to
F .75
allow a continuous run with 90˚
(19)
turns. (outside opening) F
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B-Line series electrical enclosures 19 Eaton
Cable & Wire Management
Lay-In Wireway
Cable & Wire Management
Tee Tee
Side hinge cover design for Catalog Number A B E F
in. mm in. mm in. mm in. mm
applications where a “T”
junction is necessary. 22 HST 2.50 63 2.50 63 5.38 136 4.25 198
44 HST 4.00 102 4.00 102 6.15 156 6.12 155
66 HST 6.00 152 6.00 152 7.15 181 7.12 181
B
88 HST 8.00 203 8.00 203 8.15 207 8.12 206
1010 HST 10.00 254 10.00 254 9.15 232 9.12 231
A 1212 HST 12.00 305 12.00 305 10.15 258 10.12 257
.75 .75
(19) (19)
F F
Cross
Side cover and broad body
design to junction cable run
in four directions. Cross
Removable cover is Catalog Number A B E F
secured with screws. in. mm in. mm in. mm in. mm
.75
(19)
F F
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Eaton 20 B-Line series electrical enclosures
Cable & Wire Management
Lay-In Wireway
Install inside connector Install and secure Install outside connector Latch shut
in wireway ends and hinged covers around wireway splice (padlock can be installed
tighten location if desired)
Application Construction
• Houses runs of power, control and communication • Wireway body and cover are fabricated from code gauge steel,
cable or brushed aluminum (see page 22)
• Used for cable and wire junction, distribution and • Wireway body has embossed mounting holes on the back
termination • Cover is secured to the body with gasketed retaining screw
• Variety of fittings allow runs which can change directions, size,
Standards junction and terminate, as well as, expansion and contraction
• UL 870 listed, Type 3R • Wireway connectors (sold separately) have a gate feature
• CSA C22.2 No. 26 certified, Type 3R which can swing completely open allowing for lay-in of wire
• Conforms to NEMA standard for Type 3R and cable
• Wireway connectors have a locking feature for optional
Material & Finish pad-locking
• Galvanealed steel with ANSI 61 gray acrylic • Removable hinge cover construction
electrocoat finish and zinc plated hardware • Z-slots for quick-connect connection method
• Aluminum with stainless steel hardware • Wireways 120” (3048mm) in length have two overlapping covers
Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
B-Line series electrical enclosures 21 Eaton
Cable & Wire Management
Lay-In Wireway
Cable & Wire Management
L
L
L - 4.5”
B A D
Wireway Bottom
A
Mounting Embossment
with .25” Dia. Hole (4)
NK = No Knockouts
Wireway Connectors
Connector Screw
Swing gate allows for lay-in installation of wire and cable. 3.0”
Clearance Holes
Wrap-around connector provides Type 3R rating and padlocking provision.
B
Connector
Catalog Number A B
Steel Aluminum
in. mm in. mm A
44-3RHSC 44-3RAHSC 4.00 101 4.00 101 Padlockable Latch
66-3RHSC 66-3RAHSC 6.00 152 6.00 152
88-3RHSC 88-3RAHSC 8.00 203 8.00 203
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Eaton 22 B-Line series electrical enclosures
Cable & Wire Management
Lay-In Wireway
Wireway End
Used to terminate wireway or fitting.
B Wireway End
Catalog Number A B
Steel Aluminum
in. mm in. mm
A 44-3RHSE NK 44-3RAHSE NK 4.00 101 4.00 101
66-3RHSE NK 66-3RAHSE NK 6.00 152 6.00 152
88-3RHSE NK 88-3RAHSE NK 8.00 203 8.00 203
Wireway Tee D
Side opening hinge cover
design for applications Wireway Tee
where a tee junction is Catalog Number A B C D
necessary. Steel Aluminum
B in. mm in. mm in. mm in. mm
C 44-3RHST 44-3RAHST 4.00 101 4.00 101 13.84 351 9.04 229
A
66-3RHST 66-3RAHST 6.00 152 6.00 152 15.84 402 11.04 280
88-3RHST 88-3RAHST 8.00 203 8.00 203 17.84 453 13.04 331
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B-Line series electrical enclosures 23 Eaton
Cable & Wire Management
Lay-In Wireway
Cable & Wire Management
Wireway Cross
Side opening cover design Wireway Cross
for applications where a C C Catalog Number A B C
cross junction is necessary. Steel Aluminum
in. mm in. mm in. mm
B 44-3RSCX 44-3RASCX 4.00 101 4.00 101 13.84 351
66-3RSCX 66-3RASCX 6.00 152 6.00 152 15.84 402
88-3RSCX 88-3RASCX 8.00 203 8.00 203 17.84 453
A
Wireway Reducer
Screw opening cover design for
applications where a change in B Wireway Reducer
wireway cross-section (height x Catalog Number A B C
width) is necessary. Steel Aluminum
B in. mm in. mm in. mm
A
4466-3RSCR 4466-3RASCR 4.00 101 6.00 152 10.00 254
4488-3RSCR 4488-3RASCR 4.00 101 8.00 203 10.00 254
C 6688-3RSCR 6688-3RASCR 6.00 152 8.00 203 10.00 254
A
Bolt-On Barrier
For installations that require
separated wiring compartments.
An ideal solution for separating Wireway Wireway Size
power from communication Catalog Number Height x Depth Length Height
cables. Steel Aluminum AxB L H
in. mm in. mm in. mm
* Not UL or CSA listed fitting
44-12BK* 44-3RBKA* 4.00 x 4.00 101 x 101 60.00 1524 3.00 76.2
66-12BK* 66-3RBKA* 6.00 x 6.00 152 x 152 60.00 1524 4.50 114.3
88-12BK* 88-3RBKA* 8.00 x 8.00 203 x 203 60.00 1524 6.00 152.4
L .875
.875
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Eaton 24 B-Line series electrical enclosures
Cable & Wire Management
Lay-In Wireway
Application Construction
• Houses runs of control and power cable • Wireway body and cover are fabricated from (14) gauge steel
• Protects against circulating dust, falling dirt and • Flanges are (10) gauge steel
dripping noncorrosive liquids • All continuous welded seams are finished smooth
• External and internal edges are rounded to prevent injury or
Standards damage to cable
• UL 870 listed, unless noted • Covers are secured to the wireway and fitting body with heavy
• CSA C22.2 No. 26 certified, unless noted duty butt hinges and quick-release latches
• Conforms to NEMA standard for Type 12 • Covers have a fixed, oil-resistant gasket
• An oil-resistant gasket is provided for installation between
Finish flanges
• Wash and phosphate undercoat • All covers and sealing plates can be hinged completely open or
• ANSI 61 gray painted finish removed to allow for continuous lay-in cable feed
• Hardware and latches are zinc plated • All straight sections and fittings are furnished with sealing plate
Accessories kits (see pages 26-30)
• Touch-up paint
• See Accessories section Discount Schedule: C2
Subclass: D90
Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
B-Line series electrical enclosures 25 Eaton
Cable & Wire Management
Lay-In Wireway
Cable & Wire Management
.765 3.375
(19) (86) Ø .281
(7) 4.010 4.820
3.548 (4 PL) (102)
Ø .281 (122)
2.510 (90)
(7) (64) 3.250
(4 PL) (83)
2.048
(52)
4.020
2.520 (102)
(64)
3.125 4.625
(117)
(79)
2.50 x 2.50 4.00 x 4.00
4.000 5.640
(102) (143)
.765
(19) 8.875
.765 (225)
6.875
(19)
(175)
Ø .281
Ø .281 (7)
(7) (7 PL)
(7 PL) 8.010
6.010 7.548 .125 (203) 8.820
5.548 .125 6.820 (192) (3) (224)
(153)
(141) (3) (173) 4.312
3.312 (110) .125
(84) .125 (3)
(3)
8.020
6.020 (204)
(153)
8.625
6.625 (219)
(168)
6.00 x 6.00 8.00 x 8.00 9.640
7.640 (245)
(194)
.765
12.875
(19)
(327)
Ø .281
(7)
(8 PL)
.125
5.548
(3)
(141)
3.312
(84)
.125
(3)
4.125
(105)
12.625
(321)
12.00 x 6.00
13.640
(346)
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Eaton 26 B-Line series electrical enclosures
Cable & Wire Management
Lay-In Wireway
W
W
H
W 11.88
4.75 (302)
(121)
H
H
12.00
W
(305)
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B-Line series electrical enclosures 27 Eaton
Cable & Wire Management
Lay-In Wireway
Cable & Wire Management
A A
Type 12 B B
Illustration Sheet and Catalog Number Subclass: D90
H
W
H H W B
A
W
L L
2” Nipple (LN2) 90˚ Elbow, Outside-Top Opening
1” Nipple (LN1) 3” Nipple (LN3) • Includes (2) sealing plate kits
• Includes hardware • Includes hardware Catalog Size H W A B
Number in. mm in. mm in. mm in. mm
Catalog Size H W
Number in. mm in. mm 22-12LE9AC 2.5 x 2.5 2.50 64 2.50 64 5.94 151 4.69 119
22-12LN(*) 2.5 x 2.5 2.50 64 2.50 64 44-12LE9AC 4x4 4.00 102 4.00 102 7.44 189 5.44 138
44-12LN(*) 4x4 4.00 102 4.00 102 66-12LE9AC 6x6 6.00 152 6.00 152 9.44 240 6.44 164
66-12LN(*) 6x6 6.00 152 6.00 152 88-12LE9AC 8x8 8.00 203 8.00 203 11.44 291 7.44 189
A B B
H
H 90˚ Elbow, Outside Opening
W A
• Includes (1) sealing plate kit
H W
B
W
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Eaton 28 B-Line series electrical enclosures
Cable & Wire Management
Lay-In Wireway
W A
45˚ Elbow, Top Opening A 45˚ Elbow, Inside Opening
W
• Includes (1) sealing plate kit • Includes (1) sealing plate kit
Catalog Size H W A Catalog Size H W A
Number in. mm in. mm in. mm Number in. mm in. mm in. mm
22-12LE45A 2.5 x 2.5 2.50 64 2.50 64 3.12 79
22-12LE45B 2.5 x 2.5 2.50 64 2.50 64 3.70 94
44-12LE45A 4x4 4.00 102 4.00 102 3.70 94
44-12LE45B 4x4 4.00 102 4.00 102 4.28 109
66-12LE45A 6x6 6.00 152 6.00 152 4.46 113
66-12LE45B 6x6 6.00 152 6.00 152 5.04 128
88-12LE45A 8x8 8.00 203 8.00 203 5.23 133 88-12LE45B 8x8 8.00 203 8.00 203 5.81 148
126-12LE45A 12 x 6 6.00 152 12.00 305 6.76 172 126-12LE45B 12 x 6 6.00 152 12.00 305 5.04 128
A A A
A
H
H
W
45˚ Elbow, Outside Opening
• Includes (1) sealing plate kit
W 15˚ Elbow, Top Opening
Catalog Size H W A • Includes (1) sealing plate kit
Number in. mm in. mm in. mm
22-12LE45C 2.5 x 2.5 2.50 64 2.50 64 2.65 67 Catalog Size H W A
Number in. mm in. mm in. mm
44-12LE45C 4x4 4.00 102 4.00 102 3.51 89
22-12LE15A 2.5 x 2.5 2.50 64 2.50 64 2.57 65
66-12LE45C 6x6 6.00 152 6.00 152 3.91 99
44-12LE15A 4x4 4.00 102 4.00 102 2.77 70
88-12LE45C 8x8 8.00 203 8.00 203 4.24 108
66-12LE15A 6x6 6.00 152 6.00 152 3.03 77
126-12LE45C 12 x 6 6.00 152 12.00 305 3.91 89
88-12LE15A 8x8 8.00 203 8.00 203 3.29 84
126-12LE15A 12 x 6 6.00 152 12.00 305 3.81 97
A
B L
B
H H
A
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B-Line series electrical enclosures 29 Eaton
Cable & Wire Management
Lay-In Wireway
Cable & Wire Management
Type 12
Illustration Sheet and Catalog Number Subclass: D90
11.94 A A
12.00 B
(303)
(305) B
6.00
(152) H
12.00
(305) H
12.00
(305) W
1212-12LASD 11.94
W (303) Cross, Top Opening
Adapters • Includes (3) sealing plate kits
• Includes (2) sealing plate kits Catalog Size H W A B
Catalog Size Competitor H W Number in. mm in. mm in. mm in. mm
Number in. mm in. mm 22-12LC 2.5 x 2.5 2.50 64 2.50 64 8.00 203 4.00 102
22-12LAHW 2.5 x 2.5 2.50 64 2.50 64 44-12LC 4x4 4.00 102 4.00 102 9.50 241 4.75 121
44-12LAHW 4x4
Hoffman®† 4.00 102 4.00 102 66-12LC 6x6 6.00 152 6.00 152 11.50 292 5.75 146
or
66-12LAHW 6x6 6.00 152 6.00 152 88-12LC 8x8 8.00 203 8.00 203 13.50 343 6.75 171
Wiegmann®
88-12LAHW 8x8 † 8.00 203 8.00 203 126-12LC 12 x 6 6.00 152 12.00 152 17.50 445 8.75 222
126-12LAHW 12 x 6 6.00 152 12.00 305
22-12LASD 2.5 x 2.5 2.50 64 2.50 64
W2
44-12LASD 4x4 4.00 102 4.00 102 W1
66-12LASD 6x6 Square D®† 6.00 152 6.00 152
88-12LASD 8x8 8.00 203 8.00 203
H1
126-12LASD 12 x 6 6.00 152 12.00 305
H2
22-12LAHM 2.5 x 2.5 2.50 64 2.50 64
44-12LAHM 4x4 4.00 102 4.00 102
Reducer
Hammond • Includes hardware
66-12LAHM 6x6 Mfg.™† 6.00 152 6.00 152
88-12LAHM 8x8 8.00 203 8.00 203 Catalog Size H1 H2 W1 W2
Number in. mm in. mm in. mm in. mm
126-12LAHM 12 x 6 6.00 152 12.00 305
4422-12LR 4 x 4 to 2.5 x 2.5 2.44 62 4.82 122 2.38 60 5.64 143
† Marks are the property of their respective owners.
6644-12LR 6 x 6 to 4 x 4 3.94 100 6.82 173 3.88 99 7.64 194
8866-12LR 8 x 8 to 6 x 6 5.94 151 8.82 224 5.88 149 9.64 245
12644-12LR 12 x 6 to 4 x 4 3.94 100 6.82 173 3.88 99 13.64 346
12666-12LR 12 x 6 to 6 x 6 5.94 151 6.82 173 5.88 149 13.64 346
D L
H
H
11.94
W (303)
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Eaton 30 B-Line series electrical enclosures
Cable & Wire Management
Lay-In Wireway
60.00
W (1524)
.875
(22)
3.00
H .875
(76)
(22)
Sealing Plate, Flat
• Includes hardware Barrier, Bolt-On
• Includes hardware
Catalog Size W
Number in. mm Catalog Size H
Number in. mm
22-12LSP 2.5 x 2.5 2.50 64
22-12BK 2.5 x 2.5 1.88 48
44-12LSP 4x4 4.00 102
44-12BK 4x4 3.00 76
66-12LSP 6x6 6.00 152
66-12BK 6x6 4.50 114
88-12LSP 8x8 8.00 203
88-12BK 8x8 6.00 152
126-12LSP 12 x 6 12.00 305
66-12BK 12 x 6 4.50 114
W1 W1
W2
W2
H2
H1
H
Box Connector
• Includes hardware Closure Plate
Catalog Size H1 H2 W1 W2 • Includes hardware
Number in. mm in. mm in. mm in. mm
Catalog Size H W1 W2
22-12LBC 2.5 x 2.5 4.10 104 2.35 60 4.10 104 2.35 60 Number in. mm in. mm in. mm
44-12LBC 4x4 5.74 146 3.85 72 5.74 146 3.85 72 22-12LCP 2.5 x 2.5 2.50 64 4.00 102 2.50 64
66-12LBC 6x6 7.74 197 5.85 123 7.74 197 5.85 123 44-12LCP 4x4 4.00 102 5.64 143 4.00 102
88-12LBC 8x8 9.74 247 7.85 174 9.74 247 7.85 174 66-12LCP 6x6 6.00 152 7.64 194 6.00 152
126-12LBC 12 x 6 7.74 197 5.85 123 13.74 197 11.85 301 88-12LCP 8x8 8.00 203 9.64 245 8.00 203
126-12LCP 12 x 6 6.00 152 13.64 346 12.00 305
3.62
C D
(92)
W
A B
H2
H1
Wireway Hangers
• Includes wireway to bracket 2.25
W mounting hardware (57)
• Anchors not included
Drop Bracket
Catalog Size W A B C D Catalog Size H1 H2 W
Number in. mm in. mm in. mm in. mm in. mm Number in. mm in. mm in. mm
22-12LDH 2.5 x 2.5 4.50 114 8.75 222 1.50 38 1.50 38 3.50 89 22-12LBH 2.5 x 2.5 3.38 86 2.50 64 4.38 111
44-12LDH 4x4 6.00 152 11.75 298 3.00 76 3.00 76 5.00 127 44-12LBH 4x4 4.88 124 4.00 102 5.88 149
66-12LDH 6x6 8.50 216 16.00 406 5.00 127 5.00 127 7.00 178 66-12LBH 6x6 7.13 181 6.25 159 8.13 207
88-12LDH 8x8 10.50 267 20.00 508 7.00 178 7.00 178 9.00 229 88-12LBH 8x8 9.13 232 8.25 210 10.13 257
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B-Line series electrical enclosures 31 Eaton
Cable & Wire Management
Feed-Through Wireway
Cable & Wire Management
Type 12
Data Sheet
Application Construction
• Houses runs of control and power cable • Wireway body and cover are fabricated from (14) gauge steel
• Protects against circulating dust, falling dirt and • Flanges are (10) gauge steel
dripping noncorrosive liquids • All continuous welded seams are finished smooth
• External and internal edges are rounded to prevent injury or
Standards damage to cable
• UL 870 listed, unless noted • Covers are secured to the wireway body with heavy-duty
• CSA C22.2 No. 26 certified, unless noted hinges on one side and easy-to-operate screw clamps
• Conforms to NEMA standard for Type 12 mounted to the opposite side
• Continuous flanged ends assure rigid connections of wireway
Finish and fittings
• Covers have a seamless poured in-place gasket
• Wash and phosphate undercoat
• An oil-resistant gasket is provided for installation between
• ANSI 61 gray painted finish
flanges
• Hardware and latches are zinc plated
Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
Eaton 32 B-Line series electrical enclosures
Cable & Wire Management
Feed-Through Wireway
9.75
(248)
7.75 B
(197)
A
4.31
5.50 (109)
(140) 3.31
CL 9.75
(84) B
CL 7.75 (248)
5.50 B (197) 4.31
4.62 3.31 (109)
B (140)
(117) (84)
.12
.12 (3)
.12
A .12 4.31
(3) 4.31 (3)
3.31 3.31 (3)
(109) (109)
4.62 (84) (84) CL
(117) CL
Flange Detail
outside flange
gasket
15.50
Wireway Section (394)
• Lengths from inside flange
12.00” (305 mm)
to 120.00” (3048 mm)
H
H
Length
W
W
Telescopic Fitting
Actual Length
Straight Section For in. mm
• Adjustable lengths from 1.50” (38 mm)
• Includes (1) gasket kit to 13.50” (343 mm)
12 11.94 303
• No cutting or welding required
Catalog Size H W 24 23.94 608
Number in. mm in. mm 36 35.94 913
44(*)-12FW 4x4 4.00 102 4.00 102 48 47.94 1218 Catalog Size H W
66(*)-12FW 6x6 6.00 152 6.00 152 60 59.94 1522 Number in. mm in. mm
88(*)-12FW 8x8 8.00 203 8.00 203 120 119.94 3046 44-12FTF * 4x4 3.82 97 3.82 97
66-12FTF * 6x6 5.82 148 5.82 148
(*) Insert for length 12 = 12”, 24 = 24”, 36 =
36”, 48 = 48”, 60 = 60”, 120 = 120”. 88-12FTF * 8x8 7.82 199 7.82 199
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B-Line series electrical enclosures 33 Eaton
Cable & Wire Management
Feed-Through Wireway
Cable & Wire Management
Type 12
Illustration Sheet and Catalog Number Subclass: DA0
12.00 *
(305)
Cut-Off Fitting H Nipple
• Length up to 12.00” (305 mm) * Lengths from 1.00” (25 mm)
Flange H • Shorten to desired length and to 6.00” (152 mm)
weld on flange
W
Catalog Size H W
Number in. mm in. mm
W
44-12FN(*) 4x4 4.00 102 4.00 102
E E E
A A 59.75
B (1518)
B
.87
(22)
A A
B B
Reducer
Center • Includes hardware Edge CL Barrier, Bolt-On
.87
Catalog Number Size A B (22)
Center Edge in. mm in. mm
6644-12FRC 6644-12FRE 6 to 4 5.50 140 4.00 102 Catalog Size Height
8866-12FRC 8866-12FRE 8 to 6 7.75 197 6.00 152 Number in. mm
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Eaton 34 B-Line series electrical enclosures
Cable & Wire Management
Feed-Through Wireway
44-12DH 44-12BH 4x4 12.00 305 6.00 152 6.25 159 3.62 92 6.00 152
E F 66-12DH 66-12BH 6x6 16.00 406 8.25 210 8.50 216 3.62 92 8.00 203
88-12DH 88-12BH 8x8 20.75 527 20.00 311 10.50 267 3.62 92 11.37 289
Drop Bracket
3.50 to 12.00
(89) (305)
Flexible Fitting Catalog Size ∅A
• Isolates wireway from shock or Number in. mm
vibration and compensates for 44-12FFF * 4x4 4.00 102
∅A misalignment. 90° maximum angle.
66-12FFF * 6x6 6.00 152
Hypalon bellow with steel flanges.
88-12FFF * 8x8 8.00 203
C C
90˚ Elbow 45˚ Elbow
A • Includes (1) gasket • Includes (1) gasket
& hardware A & hardware
A
C C
A
L
L C C L
C C
A Tee
• Includes (2) gaskets
& hardware A Cross
• Includes (3) gaskets
C & hardware
C
C A
Notes: ‘C’ dimensions are from intersection of center lines. All dimensions are to inside surfaces.
Allow .12” (3mm) for flange gasket when joining pieces. Flange holes are .28: dia. (7mm). Flange radii are .37” (9mm).
Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B-Line series electrical enclosures 35 Eaton
Cable & Wire Management
Feed-Through Wireway
Cable & Wire Management
Type 4X
Data Sheet
Application Construction
• Houses runs of control and power cables • Wireway body and cover are fabricated from Type 304
• Intended for indoor or outdoor use where a stainless steel
corrosive environment exists • Flanges are (10) gauge stainless steel
• Protects against corrosion, windblown dust and rain, • All continuous welded seams are finished smooth
splashing water and hose-directed water • External and internal edges are rounded to prevent injury or
damage to cable
Standards • Covers are secured to the wireway body with heavy-duty
• UL 870 listed, unless noted hinges on one side and easy-to-operate screw clamps
• CSA C22.2 No. 26 certified, unless noted mounted to the opposite side
• Conforms to NEMA standard for Type 4X • Continuous flanged ends assure rigid connections of wireway
and fittings
Finish • Cover has a seamless poured in-place gasket
• An oil-resistant gasket is provided for installation between
• Outer surface of wireway body and cover has a
flanges
smooth brushed finish
• Wireway body and cover is also available in Type 316
stainless steel upon special request
Discount Schedule: C2
Accessories Subclass: Z70
• Box connector
• Closure plate
• Barrier kit
• Bracket hanger
• Drop hanger
Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
Eaton 36 B-Line series electrical enclosures
Cable & Wire Management
Feed-Through Wireway
7.75
(197)
A
5.50
(140) 3.31
(84)
CL 7.75
5.50 B (197)
4.62 3.31
B (140)
(117) (84)
.12
A .12
(3)
3.31 3.31 (3)
4.62 (84) (84)
(117) CL
Flange Detail
outside flange
gasket
Wireway Section
• Lengths from 15.50
12.00” (305 mm) (394)
to 120.00” (3048 mm) inside flange
H
Actual Length H
Length For in. mm
12 11.94 303
W
24 23.94 608
36 35.94 913 W
48 47.94 1218
60 59.94 1522 Telescopic Fitting
120 119.94 3046 • Adjustable lengths from 1.50” (38 mm)
to 13.50” (343 mm)
• No cutting or welding required
Straight Section
• Includes (1) gasket kit
Catalog Size H W
Catalog Size H W Number in. mm in. mm
Number in. mm in. mm
44-4XSFTF * 4x4 3.82 97 3.82 97
44(*)-4XSFW 4x4 4.00 102 4.00 102
66-4XSFTF * 6x6 5.82 148 5.82 148
66(*)-4XSFW 6x6 6.00 152 6.00 152
* Not UL or CSA Listed fitting.
(*) Insert for length 12 = 12”, 24 = 24”, 36 =
36”, 48 = 48”, 60 = 60”, 120 = 120”.
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B-Line series electrical enclosures 37 Eaton
Cable & Wire Management
Feed-Through Wireway
Cable & Wire Management
Type 4X
Illustration Sheet and Catalog Number Subclass: Z70
12.00 *
(305)
Cut-Off Fitting H Nipple
• Length up to 12.00” (305 mm) * Lengths from 1.00” (25 mm)
H • Shorten to desired length and to 6.00” (152 mm)
Flange
weld on flange
W
Catalog Size H W
Number in. mm in. mm
W
44-4XSFN(*) 4x4 4.00 102 4.00 102
E E E
A A 59.75
B (1518)
B
.87
(22)
A A
B B
Reducer
Center • Includes hardware Edge CL
Barrier, Bolt-On
.87
(22)
Catalog Number Size A B
Center Edge in. mm in. mm
Catalog Size Height
6644-4XSFRC 6644-4XSFRE 6 to 4 5.50 140 4.00 102 Number in. mm
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Eaton 38 B-Line series electrical enclosures
Cable & Wire Management
Feed-Through Wireway
H
D Catalog Number Size D E F G H
Drop Bracket in. mm in. mm in. mm in. mm in. mm
44-4XSDH 44-4XSBH 4x4 12.00 305 6.00 152 6.25 159 3.62 92 6.00 152
E F
66-4XSDH 66-4XSBH 6x6 16.00 406 8.25 210 8.50 216 3.62 92 8.00 203
Drop Bracket
3.50 to 12.00
(89) (305)
Flexible Fitting Catalog Size ∅A
• Isolates wireway from shock or Number in. mm
vibration and compensates for 44-4XSFFF * 4x4 4.00 102
∅A misalignment. 90° maximum angle.
66-4XSFFF * 6x6 6.00 152
Hypalon bellow with steel flanges.
* Not UL or CSA Listed fitting.
C C
90˚ Elbow 45˚ Elbow
A • Includes (1) gasket • Includes (1) gasket
& hardware A & hardware
A
C C
A
L
L C C L
C C
A Tee
• Includes (2) gaskets
& hardware A Cross
• Includes (3) gaskets
C & hardware
C
C A
Notes: ‘C’ dimensions are from intersection of center lines. All dimensions are to inside surfaces.
Allow .12” (3mm) for flange gasket when joining pieces. Flange holes are .28: dia. (7mm). Flange radii are .37” (9mm).
Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B-Line series electrical enclosures 39 Eaton
Cable & Wire Management
Wiring Troughs
Cable & Wire Management
Application Construction
• Used for indoor cable and wire junction, distribution, • Covers and bodies are fabricated from code gauge
and termination applications where dirt, dust, oil, and galvanized steel (see table, page 41)
water are not serious problems • Bodies have mounting holes on the back
• Cover is held secure to the body by plated screws
Standards • Keyhole slots on the trough cover allow removal of cover
• UL 870 listed, Type 1 without removing screws
• CSA C22.2 No. 26 certified, Type 1 • Shipped complete with permanently connected ends
• Conforms to NEMA standard for Type 1
Discount Schedule: A2
Finish
• Galvanized Steel
Subclass: AN1
Accessories
• See Accessories section
Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
Eaton 40 B-Line series electrical enclosures
Cable & Wire Management
Wiring Troughs
C-4.00
(102)
A D
Wireway Side
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B-Line series electrical enclosures 41 Eaton
Cable & Wire Management
Wiring Troughs
Cable & Wire Management
Finish
• Wash and phosphate undercoat or galvanized steel
• ANSI 61 gray acrylic electrocoat finish
Accessories
• Sealing devices
• Touch-up paint
• See Accessories section
Construction
• Wireway body and cover are fabricated from (16) gauge
galvaneal steel for painted or galvanized steel
• Wireway body has embossed mounting holes on the back
• Wireway is available with or without knockouts on the
bottom end only, (see drawing)
Application • Cover is held secure by sliding it under the top end flange
• Houses runs of control and power cable and fastening it with plated screws on the bottom end
• Used for cable and wire junction, distribution and flange
termination • Sealing screws and lances are located at each end of the
wireway cover
• Wireway exceeding 72 inches in length has two covers, a
Standards
removable center channel and body supports
• UL 870 listed, Type 3R
• CSA C22.2 No. 26 certified, Type 3R
• Conforms to NEMA standard for Type 3R
Discount Schedule: A2
Subclass: AM1 - Painted & Z50 - Galvanized
C
C-4.12
(105)
A-2.25
A (57)
B 1.25
(32)
J J J
H H
Knockout sizes:
1.56 3.00 3.00 3.00
(40) (76) (76)
H = 3/4” or 1/2” conduit
(76)
typ. typ. J = 11/4” or 1” conduit
spacing spacing
Wireway Bottom
Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
Eaton 42 B-Line series electrical enclosures
Cable & Wire Management
Wiring Troughs
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B-Line series electrical enclosures 43 Eaton
Cable & Wire Management
Wiring Troughs
Cable & Wire Management
Application Construction
• Houses runs of control and power cable • Wireway body and cover are fabricated from (14) gauge steel
• Protects against circulating dust, falling dirt and • All continuous welded seams are finished smooth
dripping noncorrosive liquids • Cover is secured to the wireway body with semi-hinges on
one side and easy-to-operate screw clamps mounted to the
Standards opposite side
• UL 870 listed • Two chains hold cover to the body when screw clamps
• CSA C22.2 No. 26 certified are released
• Conforms to NEMA standard for Type 12 • Cover has a seamless poured in-place gasket
• External mounting feet are provided for wall mounting
Finish
• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Discount Schedule: C2
• Hardware and latches are zinc plated Subclass: DB0
Accessories
• Touch-up paint
• See Accessories section
Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
Eaton 44 B-Line series electrical enclosures
Cable & Wire Management
Wiring Troughs
D D
1.62 1.62 B
(41) (41) clamp
A A+1.12
(28)
mounting feet
(omit center foot where
CL “C” is less than 30) chain
C-1.00
(25)
Wireway Front Wireway Side
XX12-12WT XX30-12WT
XX18-12WT XX36-12WT XX60-12WT
XX24-12WT XX48-12WT XX72-12WT
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B-Line series electrical enclosures 45 Eaton
Cable & Wire Management
Wiring Troughs
Cable & Wire Management
Application Construction
• Houses runs of control and power cable • Wireway body and cover are fabricated from (14) gauge Type
• Protects against corrosion, windblown dust and 304 stainless steel
rain, splashing water and hose-directed water • All continuous welded seams are finished smooth
• Cover is secured to the wireway body with semi-hinges on
Standards one side and easy-to-operate screw clamps mounted to the
• UL 870 listed opposite side
• CSA C22.2 No. 26 certified • Two chains hold cover to the body when screw clamps are
• Conforms to NEMA standard for Type 4X released
• Cover has a seamless poured in-place gasket
• External mounting feet are provided for wall mounting
Finish
• Outer surface of wireway body and cover has a
smooth brushed finish Discount Schedule: C2
Accessories Subclass: U10
• Bracket hanger
• Drop hanger
Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
Eaton 46 B-Line series electrical enclosures
Cable & Wire Management
Wiring Troughs
D D
1.62 1.62 B
(41) (41) clamp
A A+1.12
(28)
mounting feet
(omit center foot where
CL “C” is less than 30) chain
C-1.00
(25)
Wireway Front Wireway Side
XX12-12WT XX30-12WT
XX18-12WT XX36-12WT XX60-12WT
XX24-12WT XX48-12WT XX72-12WT
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
B-Line series electrical enclosures 47 Eaton
Cable & Wire Management - Notes
Cable & Wire Management