Professional Documents
Culture Documents
Price List of MS - March2019 PDF
Price List of MS - March2019 PDF
TOTAL
NO MS NUMBER TITLE PRICE
PAGES
GUIDANCE ON THE USE OF THE SUBSTITUTION METHOD FOR MEASUREMENTS
1 MS CISPR 19:2000 OF RADIATION FROM MICROWAVE OVENS FOR FREQUENCIES ABOVE 1 GHz 12 RM 15.00
(C.I.S.P.R. Publication 19:1983, IDT)
SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING
2 MS CISPR 16-1 : 2001 APPARATUS AND METHODS - PART 1 : RADIO DISTURBANCE AND IMMUNITY 183 RM 270.00
MEASURING APPARATUS
INTERFERENCE TO MOBILE RADIO COMMUNICATIONS IN THE PRESENCE OF
3 MS CISPR 21 : 2002 IMPULSIVE NOISE - METHODS OF JUDGING DEGRADATION AND MEASURES TO 14 RM 15.00
IMPROVE PERFORMANCE (CISPR 21: 1999, IDT)
DETERMINATION OF LIMITS FOR INDUSTRIAL, SCIENTIFIC AND MEDICAL
4 MS CISPR 23 : 2002 23 RM 30.00
EQUIPMENT (CISPR 23: 1987, IDT)
SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING
5 MS CISPR 16 -2 : 2002 APPARATUS AND METHODS PART 2 : METHODS OF MEASUREMENT OF 90 RM 135.00
DISTURBANCES AND IMMUNITY
GUIDANCE ON THE USE OF THE SUBSTITUTION METHOD FOR MEASUREMENTS
6 MS C.I.S.P.R. Publication 19 : 2000 12 RM 15.00
OF RADIATION FROM MICROWAVE OVENS FOR FREQUENCIES ABOVE 1 GHz
Guidelines for standards developers to address the needs of older persons and
7 MS ISO/IEC GUIDE 71:2012 39 RM 60.00
persons with disabilities (ISO/IEC Guide 71:2001, IDT)
RADIO INTERFERENCE CHARACTERISTICS OF OVERHEAD POWER LINES AND
HIGH VOLTAGE EQUIPMENT - PART 3: CODE OF PRACTICE FOR MINIMIZING THE
8 MS CISPR 18-3:2003 43 RM 60.00
GENERATION OF RADIO NOISE (CISPR 18-3: 1986 and its Amendment 1:1996,
IDT)
GENERAL CRITERIA FOR THE OPERATION OF VARIOUS TYPES OF BODIES
9 MS ISO IEC 17020:1998 PERFORMING INSPECTION (ISO/IEC 17020:1998, IDT)(PUBLISHED BY DSM IN 22 RM 30.00
2006)
Energy management system application program interface (EMS-API) - Part 2:
10 MS IEC TS 61970-2:2011 23 RM 30.00
Glossary (IEC TS 61970-2:2004, IDT)
INFORMATION TECHNOLOGY - INTERNATIONAL STANDARIZED PROFILES
MS ISO/IEC ISP 11185-14:1998
11 FVT2nn - VIRTUAL TERMINAL BASIC CLASS-REGISTER OF CONTROL OBJECT TYPE 24 RM 30.00
(CONFIRMED:2007)
DEFINITIONS - PART 14 : FVT2112 – PRINTER CONTROL OBJECT
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
12 MS ISO GUIDE 30 : 1996 TERMS AND DEFINITIONS USED IN CONNECTION WITH REFERENCE MATERIALS 23 RM 30.00
INFORMATION TECHNOLOGY - INTERNATIONAL STANDADIZED PROFILES
MS ISO/IEC ISP 11185-15:1998 FVT2nn - VIRTUAL TERMINAL BASIC CLASS-REGISTER OF CONTROL OBJECT TYPE
13 20 RM 30.00
(CONFIRMED:2007) DEFINITIONS - PART 15 : FVT2113 – FIELD DEFINITION MANAGEMENT CONTROL
OBJECT
INFORMATION TECHNOLOGY - INTERNATIONAL STANDARIZED PROFILES
MS ISO/IEC ISP 11185-16:1998
14 FVT2nn - VIRTUAL TERMINAL BASIC CLASS-REGISTER OF CONTROL OBJECT TYPE 20 RM 30.00
(CONFIRMED:2007)
DEFINITIONS - PART 16 : FVT2114 – TERMINAL SIGNAL TITLES CONTROL OBJECT
INFORMATION TECHNOLOGY - INTERNATIONAL STANDARIZED PROFILES
MS ISO/IEC ISP 11185-13:1989
15 FVT2nn - VIRTUAL TERMINAL BASIC CLASS-REGISTER OF CONTROL OBJECT TYPE 16 RM 30.00
(CONFIRMED:2007)
DEFINITIONS - PART 13 : FVT2111 - WAITING TIME CONTROL OBJECT
RADIO INTERFERENCE CHARACTERISTICS OF OVERHEAD POWER LINES AND
HIGH-VOLTAGE EQUIPMENT - PART 2: METHODS OF MEASUREMENT AND
16 MS CISPR 18-2:2003 89 RM 135.00
PROCEDURE FOR DETERMINING LIMITS (CISPR 18-2:1986 and its Amendment
1:1993 and Amendment 2:1996, IDT)
REFERENCE MATERIALS - GENERAL AND STATISTICAL PRINCIPLES FOR
17 MS ISO GUIDE 35:2008 76 RM 120.00
CERTIFICATION (ISO GUIDE 35:2006, IDT)
18 MS ISO GUIDE 33:2008 USES OF CERTIFIED REFERENCE MATERIALS (ISO GUIDE 33:2000, IDT) 35 RM 45.00
RADIO INTERFERENCE CHARACTERISTICS OF OVERHEAD POWER LINES AND
19 MS CISPR 18-1:2003 HIGH-VOLTAGE EQUIPMENT PART 1: DESCRIPTION OF PHENOMENA (CISPR 18- 113 RM 165.00
1:1982, IDT)
SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED
20 MS CISPR 20:2009 EQUIPMENT – IMMUNITY CHARACTERISTICS – LIMITS AND METHODS OF 96 RM 150.00
MEASUREMENT (SECOND REVISION) (CISPR 20:2006, IDT)
VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES – RADIO
DISTURBANCE CHARACTERISTICS – LIMITS AND METHODS OF MEASUREMENT
21 MS CISPR 25:2009 90 RM 135.00
FOR THE PROTECTION OF ON-BOARD RECEIVERS (SECOND REVISION) (CISPR
25:2008, IDT)
SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING
22 MS CISPR 16-1-3:2010 41 RM 60.00
APPARATUS AND METHODS - PART 1-3: RADIO DISTURBANCE AND IMMUNITY
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
23 MS ISO GUIDE 73:2010 RISK MANAGEMENT - VOCABULARY (ISO GUIDE 73:2009, IDT) 23 RM 30.00
MS ISO/IEC GUIDE 60:2004 Conformity assessment - Code of good practice (ISO/IEC GUIDE 60:2004, IDT)
24 13 RM 15.00
(CONFIRMED:2016) (Published by DSM in 2006)
GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION
25 MS ISO/IEC GUIDE 65:2000 20 RM 30.00
SYSTEMS (ISO/IEC GUIDE 65 : 1996 (E), IDT)
Guidelines for corrective action to be taken by a certification body in the event
MS ISO GUIDE 27:1983 (2003)
26 of misuse of its mark of conformity (ISO Guide 27:1983 (2003), IDT) (Published 12 RM 15.00
(CONFIRMED:2013)
by DSM in 2007)
MS ISO/IEC GUIDE 68:2002 Arrangements for the recognition and acceptance of conformity assessment
27 17 RM 30.00
(CONFIRMED:2016) results (ISO/IEC GUIDE 68:2002, IDT) (Published by DSM in 2002)
Specification for radio disturbance and immunity measuring apparatus and
28 MS CISPR 16-2-2:2012 methods, Part 2-2: Methods of measurement of disturbances and immunity - 51 RM 75.00
Measurement of disturbance power (Second revision) (CISPR 16-2-2:2010, IDT)
Specification for radio disturbance and immunity measuring apparatus and
29 MS CISPR 16-2-3:2012 methods - Part 2-3: Methods of measurement of disturbances and immunity - 101 RM 150.00
Radiated disturbance measurements (Second revision) (CISPR 16-2-3:2010, IDT)
Information technology equipment - Immunity characteristics - Limits and
30 MS CISPR 24:2012 49 RM 75.00
methods of measurement (First revision) (CISPR 24:2010, IDT)
Specification for radio disturbance and immunity measuring apparatus and
methods - Part 2-1: Methods of measurement of disturbances and immunity –
31 MS CISPR 16-2-1:2012 84 RM 120.00
Conducted disturbances measurements (Second revision) (CISPR 16-2-1:2010,
IDT)
Calibration in analytical chemistry and use of certified reference materials (ISO
32 MS ISO GUIDE 32:2013 17 RM 30.00
Guide 32:1997, IDT)
Reference materials - Contents of certificates and labels (ISO Guide 31:2000,
33 MS ISO GUIDE 31:2013 16 RM 30.00
IDT)
CODE OF PRACTICE OF THE DESCRIPTION AND MARKING OF ARTICLES OF, OR
34 MS (P) 1247:1991 14 RM 15.00
CONTAINING PRECIOUS METAL
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
54 MS 4:2005 (CONFIRMED:2012) WHITE REFINED SUGAR FOR GENERAL USE - SPECIFICATION (THIRD REVISION) 10 RM 15.00
SPECIFICATION FOR QUICK-FROZEN, RAW AND COOKED SHRIMPS OR PRAWNS
55 MS 6:1998 13 RM 15.00
(SECOND REVISION)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
61 MS 14: PART 1:1993 SPECIFICATION FOR UREA, FERTILIZER GRADE (FIRST REVISION) 9 RM 15.00
SPECIFICATION FOR POTASSIUM CHLORIDE, FERTILIZER GRADE (FIRST
62 MS 15 : 1993 10 RM 15.00
REVISION)
SPECIFICATION FOR POTASSIUM SULPHATE, FERTILIZER GRADE (FIRST
63 MS 16:1993 10 RM 15.00
REVISION)
70 MS 25:1983, Including AMD. 1:1993 SPECIFICATION FOR CONDENSED MILK (FIRST REVISION) 27 RM 45.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
88 MS EN 40-3-2:2011 Lighting columns - Part 3-2: Design and verification - Verification by testing 16 RM 30.00
MS EN 40-2:2011
89 Lighting columns - Part 2: General requirements and dimensions 31 RM 45.00
(CONFIRMED:2015)
90 MS EN 40-3-3:2012 Lighting columns - Part 3-3: Design and verification - Verification by calculation 42 RM 60.00
91 MS EN 40-5:2012 Lighting columns - Part 5: Requirements for steel lighting columns 33 RM 45.00
Lighting columns - Part 4: Requirements for reinforced and prestressed
92 MS EN 40-4:2012 22 RM 30.00
concrete lighting columns
93 MS 45:2009 (CONFIRMED:2015) Lead-acid starter batteries for automobiles - Specification (Second revision) 44 RM 60.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
105 MS 53 : 1993 SPECIFICATION FOR AMMONIUM NITRATE FERTILIZER (FIRST REVISION) 9 RM 15.00
SPECIFICATION FOR MAGNESIUM SULPHATE, FERTILIZER GRADE (SECOND
106 MS 54 : 2001 11 RM 15.00
REVISION)
METHOD FOR THE DETERMINATION OF THE NUMBER OF THREADS PER UNIT
107 MS 55: Pt. 8:1972 14 RM 15.00
LENGTH IN WOVEN TEXTILE FABRICS
Plastics - Determination of apparent density of material that can be poured
108 MS ISO 60:2004 (CONFIRMED:2012) 10 RM 15.00
from a specified funnel (ISO 60:1977, IDT)
PLASTICS - DETERMINATION OF WATER ABSORPTION (FIRST REVISION) (ISO
109 MS ISO 62:2010 24 RM 30.00
62:2008, IDT)
MS ISO 68-1:2002 ISO GENERAL PURPOSE METRIC SCREW THREADS – BASIC PROFILE PART 1:
110 11 RM 15.00
(CONFIRMED:2011) METRIC SCREW THREADS (ISO 68-1:1998, IDT)
111 MS 68 : 1991 SPECIFICATION FOR CONTAINERS FOR LEAD - ACID BATTERIES (FIRST REVISION) 14 RM 15.00
112 MS 71:1972 SPECIFICATION FOR RADIO INTERFERENCE LIMITS FOR ELECTRICAL APPLIANCES 20 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
114 MS 75:2002 (CONFIRMED:2016) Specification for anchorages for seat belts (First revision) 17 RM 30.00
PLASTICS – DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD –
115 MS ISO 75-1:2007 23 RM 30.00
PART 1: GENERAL TEST METHOD (FIRST REVISION) (ISO 75-1:2004, IDT)
PLASTICS – DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD –
116 MS ISO 75-2:2007 21 RM 30.00
PART 2: PLASTICS AND EBONITE (FIRST REVISION) (ISO 75-2:2004, IDT)
PLASTICS – DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD –
117 MS ISO 75-3:2007 PART 3: HIGH-STRENGTH THERMOSETTING LAMINATES AND LONG-FIBRE- 16 RM 30.00
REINFORCED PLASTICS (FIRST REVISION) (ISO 75-3:2004, IDT)
118 MS 78:2002 (CONFIRMED:2012) Method of sampling fresh fruits (First revision) 13 RM 15.00
126 MS 81: PART 16:2007 SPICES AND CONDIMENTS - PART 16: DETERMINATION OF MICROBIAL COUNT 42 RM 60.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
127 MS 81: PART 15:2006 SPICES AND CONDIMENTS - PART 15: DETERMINATION OF CRUDE FIBRE 15 RM 15.00
Safety rules for the construction and installation of lifts - Part 1: Electric lifts
128 MS EN 81-1:2012 231 RM 330.00
(First revision)
Safety rules for the construction and installation of lifts - Lifts for the transport
129 MS EN 81-50:2017 of persons and goods - Part 50: Design rules, calculations, examinations and 101 RM 150.00
tests of lift components (Second revision)
Safety rules for the construction and installation of lifts - Lifts for the transport
130 MS EN 81-20:2017 of persons and goods - Part 20: Passenger and goods passenger lifts (Second 169 RM 240.00
revision)
131 MS 82:2005 (CONFIRMED:2012) White refined sugar for industrial use - Specification (Third revision) 10 RM 15.00
SUGARCANE FINAL MOLASSES - SPECIFICATION AND TEST METHODS (THIRD
132 MS 83:2010 23 RM 30.00
REVISION)
133 MS 84 : 1998 SPECIFICATION AND GRADES FOR PADDY (FIRST REVISION) 13 RM 15.00
134 MS 84:2017 (BM) Padi (Oryza sativa L.) - Spesifikasi (Semakan kedua) 33 RM 45.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
142 MS 118-4:2016 Motor vehicle gasoline - Specification - Part 4: Unleaded Euro 5 15 RM 15.00
MOTOR VEHICLE GASOLINE - SPECIFICATION - PART 2: UNLEADED EURO 2M
143 MS 118-2:2005, AMD. 1:2009 FREE2 RM -
(THIRD REVISION)
144 MS 118-3:2011 MOTOR VEHICLE GASOLINE - SPECIFICATION - PART 3: UNLEADED EURO 4M 15 RM 15.00
Motor vehicle gasoline - Specification - Part 2: Unleaded euro 2M (Third
145 MS 118-2:2005, AMD. 2:2013 FREE2 RM -
revision) AMENDMENT 2
146 MS 119:2006 BRAKE FLUIDS FOR MOTOR VEHICLE - SPECIFICATION (SECOND REVISION) 15 RM 15.00
147 MS 119:2012 Brake fluids - Motor vehicle - Specification (Third revision) 17 RM 30.00
149 MS 121:1986 SPECIFICATION FOR SCHOOL EXERCISE BOOKS (FIRST REVISION) 16 RM 30.00
SPECIFICATION FOR FUEL OILS FOR USE IN ENGINES AND BURNING EQUIPMENT
150 MS 122 : 1998 8 RM 15.00
(SECOND REVISION)
151 MS 123-1:2014 Diesel fuel - Specification - Part 1: Euro 2M (Fourth revision) 15 RM 15.00
152 MS 123-1:2018 Diesel fuel - Specification - Part 1: Euro 2M (Fifth revision) 15 RM 15.00
153 MS 123-1:2005 DIESEL FUEL - SPECIFICATION - PART 1: EURO 2M (THIRD REVISION) 13 RM 15.00
154 MS 123-1:2005, AMD. 1:2010 DIESEL FUEL - SPECIFICATION - PART 1: EURO 2M (THIRD REVISION) FREE 1 RM -
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
155 MS 123-2:2014 Diesel fuel - Specification - Part 2: Euro 4M (First revision) 15 RM 15.00
156 MS 123-1:2005, AMD. 2:2012 DIESEL FUEL - SPECIFICATION - PART 1: EURO 2M (THIRD REVISION) FREE 1 RM -
161 MS 125:1995 SPECIFICATION FOR GLOSS ENAMEL PAINT (SECOND REVISION) 12 RM 15.00
162 MS 125:1995, AMD. 1:1997 SPECIFICATION FOR GLOSS ENAMEL PAINT (SECOND REVISION) FREE 1 RM -
NATURAL RUBBER LATEX CONCENTRATE - DETERMINATION OF ALKALINITY (ISO
163 MS ISO 125:2007 14 RM 15.00
125:2003, IDT)
MS ISO 128-1:2010 Technical drawings - General principles of presentation - Part 1: Introduction
164 21 RM 30.00
(CONFIRMED:2015) and index (ISO 128-1:2003, IDT)
TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART
165 MS ISO 129-1:2009 43 RM 60.00
1:GENERAL PRINCIPLES (ISO 129-1:2004, IDT)
SPECIFICATION FOR UNDER COATING PAINT FOR USE UNDER GLOSS ENAMEL
166 MS 132 : 1993 10 RM 15.00
(FIRST REVISION)
Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack
167 MS ISO 132:2013 24 RM 30.00
growth (De Mattia (First revision) (ISO 132:2011, IDT)
METHODS OF TEST FOR PAINTS AND VARNISHES : PART A10 : DETERMINATION
168 MS 133 : PART A10 : 1994 16 RM 30.00
OF FLASH POINT BY THE CLOSED CUP METHOD (FIRST REVISION)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
177 MS 133: PART G5:1975 METHODS OF TEST FOR PAINTS PART G5 : RESISTANCE TO LIQUIDS 15 RM 15.00
Clear liquids - Estimation of colour by the platinum-cobalt scale - Part K13:
178 MS 133-K13:2012 12 RM 15.00
Spectrophotometric method (ISO 6271-2:2004, IDT)
PAINTS AND VARNISHES - PART C6: DETERMINATION OF FINENESS OF GRIND
179 MS 133-C6:2010 14 RM 15.00
(SECOND REVISION) (ISO 1524:2000, IDT)
METHODS OF TEST FOR PAINTS AND VARNISHES : PART A5 : LARGE SCALE
180 MS 133 : PART A5 : 1993 16 RM 30.00
BRUSHING TEST (FIRST REVISION)
METHODS OF TEST FOR PAINTS AND VARNISHES : PART A8 : FLASH/NO FLASH
181 MS 133 : PART A8 : 1994 15 RM 15.00
TEST - CLOSED CUP EQUILIBRIUM METHOD (FIRST REVISION)
METHODS OF TEST FOR PAINTS AND VARNISHES : PART E1 : BEND TEST
182 MS 133 : PART E1 : 2000 15 RM 15.00
(CYLINDRICAL MANDREL) (FIRST REVISION) (ISO 1519 : 1973, MOD)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
186 MS 133 : PART F9 : 1986 METHODS OF TEST FOR PAINTS : PART F9 : WASHABILITY 10 RM 15.00
METHODS OF TEST FOR PAINTS AND VARNISHES PART C7 : DETERMINATION OF
187 MS 133 : PART C7 : 1997 DRYING TIME USING BK DRYING RECORDER (SURFACE DRY, TOUCH DRY AND 10 RM 15.00
HARD DRY)
METHODS OF TEST FOR PAINTS AND VARNISHES : PART D5 : DETERMINATION
188 MS 133 : PART D5 : 1997 OF SPECULAR GLOSS OF NON-METALLIC PAINT FILMS AT 20º, 60º AND 85º 17 RM 30.00
(FIRST REVISION)
METHODS OF TEST FOR PAINTS AND VARNISHES : PART E14 : DETERMINATION
189 MS 133 : PART E14 : 2002 OF RESISTANCE TO ABRASION (ROTATING ABRASIVE-PAPER-COVERED WHEEL) 15 RM 15.00
(ISO 7784-1:1997, MOD)
METHODS OF TEST FOR PAINTS AND VARNISHES : PART E15 : DETERMINATION
190 MS 133 : PART E15 : 2002 OF RESISTANCE TO ABRASION (ROTATING ABRASIVE RUBBER WHEEL) (ISO 17 RM 30.00
7784-2:1997, MOD)
METHODS OF TEST FOR PAINTS AND VARNISHES : PART E8 : RESISTANCE TO
191 MS 133 : PART E8 : 2002 13 RM 15.00
IMPACT (PENDULUM TEST)
METHODS OF TEST FOR PAINTS AND VARNISHES : PART E19 : DETERMINATION
192 MS 133 : PART E19 : 2002 15 RM 15.00
OF FILM HARDNESS BY PENCIL TEST (ISO 15184:1998, MOD)
METHODS OF TEST FOR PAINTS AND VARNISHES : PART E18 : DETERMINATION
193 MS 133 : PART E18 : 2002 18 RM 30.00
OF MAR RESISTANCE USING A POINTED STYLUS (ISO 12137-2:1997, MOD)
METHODS OF TEST FOR PAINTS AND VARNISHES : PART E17 : DETERMINATION
194 MS 133 : PART E17 : 2002 17 RM 30.00
OF MAR RESISTANCE USING A CURVED STYLUS (ISO 12137-1:1997)
METHODS OF TEXT FOR PAINTS AND VARNISHES : PART E16 : DETERMINATION
195 MS 133 : PART E16 : 2002 OF RESISTANCE TO ABRASION (RECIPROCATING TEST PANEL) (ISO 7784-3:2000, 17 RM 30.00
MOD)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
264 MS 133-C8:2010 PAINTS AND VARNISHES - PART C8: PRINT-FREE TEST (ISO 3678:1976, MOD) 10 RM 15.00
PAINTS AND VARNISHES - DRYING TESTS - PART C3: DETERMINATION OF
265 MS 133-C3:2010 THROUGH-DRY STATE AND THROUGH-DRY TIME (SECOND REVISION) (ISO 9117- 14 RM 15.00
1:2009, IDT)
PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS -
266 MS 133-E20:2010 PART E20: FALLING-WEIGHT TEST, SMALL-AREA INDENTER (ISO 6272-2:2002, 15 RM 15.00
MOD)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Binders for paints and varnishes - Alkyd resins - Part K1: General methods of
292 MS 133-K1:2012 13 RM 15.00
test (ISO 6744-1:1999, IDT)
Binders for paints and varnishes - Alkyd resins - Part K2: Determination of
293 MS 133-K2:2012 12 RM 15.00
phthalic anhydride content (ISO 6744-2:1999, IDT)
Binders for paints and varnishes - Alkyd resins - Part K3: Determination of
294 MS 133-K3:2012 11 RM 15.00
unsaponifiable matter content (ISO 6744-3:1999, IDT)
Binders for paints and varnishes - Alkyd resins - Part K4: Determination of fatty
295 MS 133-K4:2012 11 RM 15.00
acid content (ISO 6744-4:1999, IDT)
Binders for paints and varnishes - Epoxy resins - Part K5: General methods of
296 MS 133-K5:2012 16 RM 30.00
test (ISO 7142:2007, IDT)
METHODS OF TEST FOR PAINTS AND VARNISHES : PART E2 : SCRATCH TEST
297 MS 133 : PART E2 : 2000 14 RM 15.00
(FIRST REVISION) (ISO 1518 : 1992, MOD)
Binders for paints and varnishes - Determination of saponification value - Part
298 MS 133-K6:2012 13 RM 15.00
K6: Titrimetric method (ISO 3681:1996, IDT)
Binders for paints and varnishes - Determination of softening point - Part K7:
299 MS 133-K7:2012 18 RM 30.00
Ring-and-ball method (ISO 4625-1:2004, IDT)
Binders for paints and varnishes - Determination of softening point - Part K8:
300 MS 133-K8:2012 14 RM 15.00
Cup-and-ball method (ISO 4625-2:2004, IDT)
METHODS OF TEST FOR PAINTS AND VARNISHES: PART F11: DETERMINATION
301 MS 133: PART F11:2003 OF RESISTANCE TO CATHODIC DISBONDING OF COATINGS FOR USE ON LAND- 15 RM 15.00
BASED BURIED STRUCTURES
METHODS OF TEST FOR PAINTS AND VARNISHES: PART F18: DETERMINATION
302 MS 133: PART F18:2003 OF RESISTANCE TO CORROSION UNDER A WET (SALT FOG)/DRY/HUMIDITY 22 RM 30.00
CYCLE (ISO 11997-1:1998, MOD)
303 MS 133 : PART G4:1973 METHOD OF TEST FOR PAINTS PART G4 : RESISTANCE TO HOT FATS 13 RM 15.00
MS 133: PART D9:1999 METHODS OF TEST FOR PAINTS AND VARNISHES : PART D9: COLORIMETRY -
304 15 RM 15.00
(CONFIRMED:2011) PRINCIPLES
MS 133: PART B9:1999 METHODS OF TEST FOR PAINTS AND VARNISHES: PART B9: DETERMINATION OF
305 11 RM 15.00
(CONFIRMED:2011) SOLUBLE HEXAVALENT CHROMIUM CONTENT OF THE PIGMENT PORTION OF
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
320 MS 145:2014 Steel fabric for the reinforcement of concrete - Specification (Fourth revision) 29 RM 45.00
HOT ROLLED STEEL BARS FOR THE REINFORCEMENT OF CONCRETE –
321 MS 146:2006 32 RM 45.00
SPECIFICATION (THIRD REVISION)
Steel for the reinforcement of concrete - Weldable reinforcing steel - Bar, coil
322 MS 146:2014 45 RM 60.00
and decoiled product - Specification (Fourth revision)
SPECIFICATION FOR QUALITY OF VITREOUS CHINA SANITARY APPLIANCES (FIRST
323 MS 147 : 2001 24 RM 30.00
REVISION)
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST
324 MS ISO 148-1:2008 31 RM 45.00
METHOD (ISO 148-1:2006, IDT)
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 2:
325 MS ISO 148-2:2008 28 RM 45.00
VERIFICATION OF TEST MACHINES (ISO 148-2:1998, IDT)
METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3:
326 MS ISO 148-3:2008 PREPARATION AND CHARACTERIZATION OF CHARPY V REFERENCE TEST PIECES 22 RM 30.00
FOR VERIFICATION OF TEST MACHINES (ISO 148-3:1998, IDT)
SPECIFICATION FOR TYRE AND WHEEL DATA PART 1 : PNEUMATIC RUBBER
327 MS 148: PART 1:1973 32 RM 45.00
TYRES
328 MS 149:2018 New pneumatic passenger car tyres - Specification (Third revision) 30 RM 45.00
329 MS 149:2008 NEW PNEUMATIC PASSENGER CAR TYRES - SPECIFICATION (SECOND REVISION) 16 RM 30.00
Road vehicles - Determination of bead unseating resistance of a tubeless
330 MS 150:2011 (CONFIRMED:2016) 14 RM 15.00
passenger car tyre (Second revision)
331 MS 151:1973 METHOD OF TESTING TYRE STRENGTH FOR PASSENGER CAR TYRES 11 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
334 MS 156 : 1994 SPECIFICATION FOR TAPIOCA PEARL (FIRST REVISION) 32 RM 45.00
OIL PALM SEEDS FOR COMMERCIAL PLANTING – SPECIFICATION (THIRD
335 MS 157:2005 21 RM 30.00
REVISION)
336 MS 157:2017 Oil palm seeds for commercial planting - Specification (Fourth revision) 21 RM 30.00
337 MS 158:2007 LIQUEFIED PETROLEUM GASES (LPG) – SPECIFICATION (THIRD REVISION) 11 RM 15.00
SPECIFICATION FOR CUTBACK BITUMEN FOR USE IN THE CONSTRUCTIONS
338 MS 159:1994 11 RM 15.00
AND/OR MAINTENANCE OF PAVEMENT(FIRST REVISION)
SPECIFICATION FOR BITUMEN-BASED COATINGS FOR COLD APPLICATION,
339 MS 160 : 1995 25 RM 30.00
SUITABLE FOR USE IN CONTACT WITH POTABLE WATER (FIRST REVISION)
SPECIFICATION FOR CATIONIC BITUMEN EMULSIONS FOR USE IN PAVEMENT
340 MS 161 : 1994 12 RM 15.00
APPLICATIONS (FIRST REVISION)
341 MS 162 : 1987 SPECIFICATION FOR ALUMINIUM WOOD PRIMER (FIRST REVISION) 11 RM 15.00
342 MS 163:1973 SPECIFICATION FOR WATER PAINT / DISTEMPER, WASHABLE OIL BOUND 16 RM 30.00
343 MS 164 : 1991 SPECIFICATION FOR ROAD MARKING PAINTS (SECOND REVISION) 19 RM 30.00
345 MS 165:2014 Industrial acids - Sampling and test methods (First revision) 89 RM 135.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
347 MS 167:1973 (CONFIRMED:2001) SPECIFICATION FOR ACETYLENE, DISSOLVED (TECHNICAL GRADE) 9 RM 15.00
351 MS 171:2013 Liquid chlorine used for potable water supply - Specification (Second revision) 31 RM 45.00
354 MS 174:1973 (CONFIRMED:2001) SPECIFICATION FOR FORMIC ACID (TECHNICAL GRADE) 174 RM 255.00
355 MS 174:2014 Formic acid - Technical grade - Specification (First revision) 9 RM 10.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
360 MS 177:1973 (CONFIRMED:2001) SPECIFICATION FOR HYDROCHLORIC ACID (TECHNICAL GRADE) 7 RM 15.00
MS ISO 177:2001 PLASTICS – DETERMINATION OF MIGRATION OF PLASTICIZERS (ISO 177 :
361 13 RM 15.00
(CONFIRMED:2008) 1988, IDT)
362 MS 177:2014 Hydrochloric acid - Technical grade - Specification (First revision) 9 RM 15.00
363 MS 178:1973 (CONFIRMED:2001) SPECIFICATION FOR SULPHURIC ACID (AR GRADE) 7 RM 15.00
Plastics - Determination of flexural properties (Second revision) (ISO 178:2010,
364 MS ISO 178:2012 28 RM 45.00
IDT)
PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1 : NON -
365 MS ISO 179 -1 : 2002 28 RM 45.00
INSTRUMENTED IMPACT TEST
Plastics - Determination of charpy impact properties - Part 2: Instrumented
366 MS ISO 179-2:2002, AMD. 1:2013 FREE 8 RM -
impact test (ISO 179-2:1997, COR. 1:1998, IDT)
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented
367 MS ISO 179-1:2012 32 RM 45.00
impact test (First revision) (ISO 179-1:2010, IDT)
PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 2 :
368 MS ISO 179-2 : 2002 INSTRUMENTED IMPACT TEST (ISO 179-2:1997 AND TECHNICAL CORRIGENDUM 26 RM 45.00
1:1998, IDT)
369 MS ISO 180 : 2002 PLASTICS - DETERMINATION OF IZOD IMPACT (ISO 180:2000, IDT) 22 RM 30.00
370 MS ISO 180:2002, AMD. 1:2013 Plastics - determination of izod impact (ISO 180:2000, IDT) AMENDMENT 1 FREE 8 RM -
371 MS 183 : 2001 SPECIFICATION FOR INDUSTRIAL SAFETY HELMET (FIRST REVISION) 29 RM 45.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
374 MS 186:1974, AMD. 1:1985 SPECIFICATION FOR CHLORATES FOR AGRICULTURAL WEEDKILLERS FREE2 RM -
PAPER AND BOARD – SAMPLING TO DETERMINE AVERAGE QUALITY(ISO
375 MS ISO 186:2003 19 RM 30.00
186:2002, IDT)
PAPER, BOARD AND PULPS – STANDARD ATMOSPHERE FOR CONDITIONING
376 MS ISO 187:2001 AND TESTING AND PROCEDURE FOR MONITORING THE ATMOSPHERE AND 17 RM 30.00
CONDITIONING OF SAMPLES (SECOND REVISION) (ISO 187:1990, IDT)
RUBBER, VULCANIZED OR THERMOPLASTIC - ACCELERATED AGEING AND HEAT
377 MS ISO 188:2008 26 RM 45.00
RESISTANCE TESTS (FIRST REVISION) (ISO 188:2007, IDT)
378 MS EN 196-2:2007 Methods of testing cement – Part 2: Chemical analysis of cement 95 RM 135.00
MS EN 196-1:2007
379 Methods of testing cement - Part 1: Determination of strength 40 RM 60.00
(CONFIRMED:2015)
380 MS EN 196-8:2007 Methods of testing cement - Part 8: Heat of hydration - Solution method 20 RM 30.00
381 MS EN 196-9:2007 Methods of testing cement – Part 9: Heat of hydration - Semi-adiabatic method 28 RM 45.00
383 MS EN 196-5:2007 Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement 19 RM 30.00
MS EN 196-7:2007 Methods of testing cement - Part 7: Methods of taking and preparing samples
384 23 RM 30.00
(CONFIRMED:2015) of cement
MS EN 196-3:2007 Methods of testing cement - Part 3: Determination of setting times and
385 21 RM 30.00
(CONFIRMED:2015) soundness
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
396 MS 216:1974, AMD. 1:1985 SPECIFICATION FOR SULPHURIC ACID (TECHNICAL GRADE) FREE 2 RM -
PAPER - UNTRIMMED SIZES - DESIGNATION AND TOLERANCES FOR PRIMARY
397 MS ISO 217:2009 AND SUPPLEMENTARY RANGES, AND INDICATION OF MACHINE DIRECTION (ISO 14 RM 15.00
217:2008, IDT)
RETREADED PNEUMATIC RUBBER TYRES FOR PASSENGER CARS AND
398 MS 224:2005, AMD. 1:2010 FREE 1 RM -
COMMERCIAL VEHICLES - SPECIFICATION (SECOND REVISION)
RETREADED PNEUMATIC RUBBER TYRES FOR PASSENGER CARS AND
399 MS 224:2005 20 RM 30.00
COMMERCIAL VEHICLES - SPECIFICATION (SECOND REVISION)
400 MS 225 : 1997 SPECIFICATION FOR GRADING OF MILLED RICE (FIRST REVISION) 16 RM 30.00
Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of
401 MS ISO 225:2014 32 RM 45.00
dimensions (First revision) (ISO 225:2010, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
404 MS 227:2016 Fish meal for animal feed - Specification (Second Revision) 13 RM 15.00
PIPE THREADS WHERE PRESSURE - TIGHT JOINTS ARE NOT MADE ON THE
MS ISO 228-2:2003
405 THREADS - PART 2: VERIFICATION BY MEANS OF LIMIT GAUGES (ISO 228- 21 RM 30.00
(CONFIRMED:2011)
2:1987, IDT)
PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE NOT MADE ON THE
MS ISO 228-1:2003
406 THREADS - PART 1: DIMENSIONS, TOLERANCES AND DESIGNATION (ISO 228- 17 RM 30.00
(CONFIRMED:2011)
1:2000, IDT)
410 MS 230:2007 COCOA BEANS – SAMPLING METHOD FOR GRADING (FIRST REVISION) 14 RM 15.00
SPECIFICATION AND METHODS FOR THE BACTERIOLOGICAL TESTING FOR
411 MS 231 : 1981 21 RM 30.00
ANIMAL FEEDS AND FEEDSTUFFS (FIRST REVISION)
412 MS 232:1974 (CONFIRMED:2012) Specification for Malaysian Mandarins for Fresh fruit consumption 14 RM 15.00
413 MS 234:2005 BLACK AND WHITE PEPPER, WHOLE - SPECIFICATION (SECOND REVISION) 14 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
418 MS 240:1974 SPECIFICATION FOR DALAPON SODIUM SALT, WATER SOLUBLE POWDER 16 RM 30.00
425 MS ISO 247:2001 RUBBER - DETERMINATION OF ASH (FIRST REVISION) (ISO 247:1990, IDT) 13 RM 15.00
Rubber, raw - Determination of volatile-matter content - Part 1: Hot-mill
426 MS ISO 248-1:2015 21 RM 30.00
method and oven method (First revision) (ISO 248-1:2011, IDT)
ANIMAL AND VEGETABLE FATS AND OILS - PART 10 : DETERMINATION OF ACID
427 MS 252: PART 10:1992 12 RM 15.00
VALUE AND ACIDITY (FIRST REVISION)
ANIMAL AND VEGETABLE FATS AND OILS : PART 20 : DETERMINATION OF
428 MS 252: PART 20:1994 11 RM 15.00
SPECIFIC EXTINCTION IN ULTRA-VIOLET LIGHT
ANIMAL AND VEGETABLE FATS AND OILS PART 15 : DETERMINATION OF
429 MS 252: PART 15:1993 13 RM 15.00
BLEACHABILITY
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
436 MS 252: PART 8:1992 ANIMAL AND VEGETABLE FATS AND OILS : PART 8 : DETERMINATION OF ASH 10 RM 15.00
442 MS 252: PART 18:1993 ANIMAL AND VEGETABLE FATS AND OILS PART 18 : SAMPLING (FIRST REVISION) 32 RM 45.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
444 MS 253 : 2001 SPECIFICATION FOR SCOURING POWDER (FIRST REVISION) 21 RM 30.00
445 MS ISO 254:2009, AMD. 1:2011 BELT DRIVES - PULLEYS - QUALITY, FINISH AND BALANCE (ISO 254:1998, IDT) FREE 1 RM -
446 MS ISO 254:2009 BELT DRIVES - PULLEYS - QUALITY, FINISH AND BALANCE (ISO 254:1998, IDT) 13 RM 15.00
451 MS 270 : 1975 SPECIFICATION FOR PRIMING PAINT : RED-LEAD BASED FOR IRON AND STEEL 11 RM 15.00
452 MS 271 : 1993 SPECIFICATION FOR RED IRON OXIDE PRIMER (FIRST REVISION) 12 RM 15.00
453 MS 272 : 1975 SPECIFICATION FOR PRIMING PAINT: ZINC CHROMATE FOR METAL SURFACES 11 RM 15.00
SPECIFICATION FOR PARAQUAT DICHLORIDE AQUEOUS SOLUTIONS (FIRST
454 MS 273:1998 15 RM 15.00
REVISION)
MS ISO 273:2006
455 FASTENERS - CLEARANCE HOLES FOR BOLTS AND SCREWS (ISO 273:1979, IDT) 9 RM 15.00
(CONFIRMED:2011)
SPECIFICATION FOR RUBBER INSULATION AND SHEATH OF ELECTRIC CABLES
456 MS 276 : 1987 23 RM 30.00
(FIRST REVISION)
457 MS 277 : 1996 SPECIFICATION FOR MOTORCYCLE BATTERIES (SECOND REVISION) 27 RM 45.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
470 MS 283:1986 SPECIFICATION FOR CARBON PAPER FOR TYPEWRITERS (FIRST REVISION) 14 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
472 MS 285:1975 (CONFIRMED:2003) SPECIFICATION FOR PAPER (DUPLICATING, COPY, LIQUID PROCESS) 10 RM 15.00
Geometrical Product Specifications (GPS) - ISO code system for tolerances on
473 MS ISO 286-2:2011 linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for 61 RM 90.00
holes and shafts (First revision) (ISO 286-2:2010, IDT)
Geometrical product specifications (GPS) - ISO code system for tolerances on
474 MS ISO 286-1:2011 47 RM 75.00
linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010, IDT)
475 MS 286:1975 (CONFIRMED:2003) SPECIFICATION FOR KRAFT PAPER, WRAPPING (UNBLEACHED AND UNTREATED) 11 RM 15.00
PAPER AND BOARD – DETERMINATION OF MOISTURE CONTENT – OVEN-
476 MS ISO 287 : 1999 16 RM 30.00
DRYING METHOD
PAPER AND BOARD - DETERMINATION OF MOISTURE CONTENT OF A LOT -
477 MS ISO 287:2010 21 RM 30.00
OVEN-DRYING METHOD (FIRST REVISION) (ISO 287:2009, IDT)
478 MS 288:1975 SPECIFICATION FOR PAINT, DRY, CEMENTITIOUS (CEMENT PAINT) 25 RM 30.00
MS ISO 289-2:1998 Rubber, vulcanized - Determinations using a shearing-disc viscometer - Part 2:
479 13 RM 15.00
(CONFIRMED:2013) Determination of pre-vulcanization characteristics (ISO 289-2:1994, IDT)
480 MS 289 : 1987 SPECIFICATION FOR ALUMINIUM FINISHING PAINT (FIRST REVISION) 12 RM 15.00
RUBBER, VULCANIZED – DETERMINATIONS USING A SHEARING - DISC
481 MS ISO 289-1 : 1998 VISCOMETER – PART 1 : DETERMINATION OF MOONEY VISCOSITY (ISO 289- 16 RM 30.00
1:1994, IDT)
482 MS 290:1975 (CONFIRMED:2004) SPECIFICATION FOR PAPER (DRAWING AND TRACING) 16 RM 30.00
SPECIFICATION FOR PAINT, VARNISH AND LACQUER REMOVER, SOLVENT TYPE,
483 MS 291 : 1984 20 RM 30.00
NON-FLAMMABLE
PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING (FIRST
484 MS ISO 291:2008 15 RM 15.00
REVISION) (ISO 291:2008, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
485 MS 293:2005 COCOA BEANS – SPECIFICATION FOR GRADING (FOURTH REVISION) 19 RM 30.00
MS ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
486 19 RM 30.00
(CONFIRMED:2012) (First revision) (ISO 293:2004, IDT)
495 MS 295:2017 Tea - Specification and test methods (Second revision) 13 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
499 MS 297:2012 Raw natural rubber - Specification (Second revision) (ISO 2000:2003, MOD) 14 RM 15.00
METHODS OF SAMPLING AND TEST FOR RAW NATURAL RUBBER (FIRST
500 MS 298:1985 50 RM 75.00
REVISION)
ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM);
SHORT RANGE DEVICES; RADIO EQUIPMENT TO BE USED IN THE 1 GHZ TO 40
501 MS 300 440-1:2008 52 RM 75.00
GHZ FREQUENCY RANGE; PART 1: TECHNICAL CHARACTERISTICS AND TEST
METHODS
ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM);
ANGLE-MODULATED CITIZENS BAND RADIO EQUIPMENT (CEPT PR 27 RADIO
502 MS 300 135-1:2008 44 RM 60.00
EQUIPMENT); PART 1: TECHNICAL CHARACTERISTICS AND METHODS OF
MEASUREMENT
ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM);
SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT TO BE USED IN THE 25 MHZ
503 MS 300 220-1:2008 63 RM 90.00
TO 1 000 MHZ FREQUENCY RANGE WITH POWER LEVELS RANGING UP TO 500
MW; PART 1: TECHNICAL CHARACTERISTICS AND TEST METHODS
ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM);
504 MS 300 224-1:2008 ON-SITE PAGING SERVICE; PART 1: TECHNICAL AND FUNCTIONAL 59 RM 90.00
CHARACTERISTICS, INCLUDING TEST METHODS
ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM);
WIDEBAND TRANSMISSION SYSTEMS; DATA TRANSMISSION EQUIPMENT
505 MS 300 328:2008 OPERATING IN THE 2,4 GHZ ISM BAND AND USING WIDE BAND MODULATION 43 RM 60.00
TECHNIQUES, HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS UNDER
ARTICLE 3.2 OF THE R & TTE DIRECTIVE
ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM);
LAND MOBILE SERVICE, RADIO EQUIPMENT INTENDED FOR THE TRANSMISSION
506 MS 300 390-1:2008 104 RM 150.00
OF DATA (AND SPEECH) AND USING AN INTEGRAL ANTENNA; PART 1:
TECHNICAL CHARACTERISTICS AND TEST CONDITIONS
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
525 MS ISO 302:2009 PULPS - DETERMINATION OF KAPPA NUMBER (ISO 302:2004, IDT) 21 RM 30.00
MS ISO 303:2004 ROAD VEHICLES - INSTALLATION OF LIGHTING AND LIGHT SIGNALLING DEVICES
526 76 RM 120.00
(CONFIRMED:2011) FOR MOTOR VEHICLES AND THEIR TRAILERS (ISO 303:2002, IDT)
533 MS 313 : 1975 METHOD FOR RING CRUSH TEST OF PAPERBOARDS 12 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
536 MS 316:2005 SOYABEAN MEAL AS ANIMAL FEEDSTUFFS - SPECIFICATION (THIRD REVISION) 10 RM 15.00
SPECIFICATION FOR EVAPORATED PRESERVED NATURAL RUBBER LATICES
537 MS 317:1986 10 RM 15.00
(FIRST REVISION)
538 MS 318 : 1989 SPECIFICATION FOR GROUDNUT MEAL AS ANIMAL FEEDSTUFF (FIRST REVISION) 12 RM 15.00
539 MS 319 : 1987 SPECIFICATION FOR CASSAVA CHIPS AS ANIMAL FEEDSTUFF (FIRST REVISION) 14 RM 15.00
540 MS 320:2018 Seeds - Sampling and test methods (Third revision) 35 RM 45.00
545 MS 325 : 1985 RECOMMENDED NOMENCLATURE FOR MALAYSIAN FRUITS (FIRST REVISION) 14 RM 15.00
546 MS 325:2017 Malaysian fruits and vegetables - Nomenclature (Second revision) 29 RM 45.00
549 MS 330:1976 (CONFIRMED:2006) SPECIFICATION FOR HIGH WET-STRENGTH GREASEPROOF PAPER 46 RM 75.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
550 MS 331:1976 (CONFIRMED:2004) SPECIFICATION FOR FILTER PAPER FOR USE IN CHEMICAL ANALYSIS 27 RM 45.00
551 MS 333:1976 (CONFIRMED:2003) SPECIFICATION FOR STENCIL PAPER (DUPLICATING-MACHINE, DRY-PROCESS) 16 RM 30.00
552 MS 333:1976, AMD. 1:1984 SPECIFICATION FOR STENCIL PAPER (DUPLICATING-MACHINE, DRY-PROCESS) FREE 1 RM -
SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES PART 2 :
553 MS IEC 335-2-25 : 1995 77 RM 120.00
PARTICULAR REQUIREMENTS FOR MICROWAVE OVENS
MS ISO 337:2007 Road vehicles - 50 semi-trailer fifth wheel coupling pin - Basic and
554 11 RM 15.00
(CONFIRMED:2016) mounting/interchangeability dimensions (ISO 337:1981, IDT)
TREATMENT OF TIMBER WITH COPPER/CHROME/ARSENIC WOOD
555 MS 360:2006 35 RM 45.00
PRESERVATIVES – SPECIFICATION (THIRD REVISION)
556 MS 361:2002 SPECIFICATION FOR FRESH, CHILLED AND FROZEN POULTRY (FIRST REVISION) 26 RM 45.00
MEASUREMENT OF NOISE EMITTED BY ACCELERATING ROAD VEHICLES -
557 MS ISO 362-2:2011 43 RM 60.00
ENGINEERING METHOD - PART 2: L CATEGORY (ISO 362-2:2009, IDT)
MEASUREMENT OF NOISE EMITTED BY ACCELERATING ROAD VEHICLES -
558 MS ISO 362-1:2010 ENGINEERING METHOD - PART 1: M AND N CATEGORIES (FIRST REVISION) (ISO 68 RM 105.00
362-1:2007, COR. 1:2009, IDT)
563 MS 377:1976 (CONFIRMED:2004) SPECIFICATION FOR SODIUM CARBONATE (TECHNICAL GRADE) 20 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
566 MS 381:1983 SPECIFICATION FOR STRAIGHT MINERAL LUBRICATING OILS (FIRST REVISION) 14 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part
588 MS 407-6:2012 11 RM 15.00
6: Copper, bronze or brass coatings
589 MS 408 : 1976 CODE OF PRACTICE FOR LAYING OF RESILIENT TILE AND SHEET FLOORING 18 RM 30.00
590 MS 409:2012 Packaging and storage of pesticides - Code of practice (First revision) 19 RM 30.00
SPECIFICATION FOR PASTEURIZED AND PASTEURIZED, HOMOGENIZED FULL-
591 MS 410:1995 12 RM 15.00
CREAM AND LOW-FAT MILK (SECOND REVISION)
SPECIFICATION FOR ULTRA HIGH TEMPERATURE MILK AND ULTRA HIGH
592 MS 411:1986 12 RM 15.00
TEMPERATURE HOMOGENIZED MILK (FIRST REVISION)
SPECIFICATION FOR RECOMBINED ULTRA HIGH TEMPERATURE MILK AND
593 MS 412:1986 RECOMBINED ULTRA HIGH TEMPERATURE HOMOGENIZED MILK (FIRST 12 RM 15.00
REVISION)
Masonry Cement - Part 1: Composition, specifications and conformity criteria
594 MS EN 413-1:2012 37 RM 60.00
(Second revision)
SPECIFICATION FOR PASTEURIZED RECOMBINED MILK AND PASTEURIZED,
595 MS 413:1983 11 RM 15.00
HOMOGENIZED RECOMBINED MILK (FIRST REVISION)
MS EN 413-2:2012
596 Masonry cement - Part 2: Test methods (Second revision) 23 RM 30.00
(CONFIRMED:2015)
METHODS OF SAMPLING AND TEST FOR PASTEURIZED MILK AND ULTRA HIGH
597 MS 414:1988 24 RM 30.00
TEMPERATURE MILK (FIRST REVISION)
CODE OF PRACTICE FOR COMPOSITE CONSTRUCTION IN STRUCTURAL STEEL
598 MS 415 : PART 1 : 1976 22 RM 30.00
AND CONCRETE PART 1 : SIMPLY SUPPORTED BEAMS IN BUILDING
THE ANALYSIS OF FERTILIZERS - PART 2 : METHOD FOR THE DETERMINATION OF
599 MS 417: PART 2:1994 16 RM 30.00
MOISTURE CONTENT, PARTICLE SIZE AND ASH CONTENT (FIRST REVISION)
THE ANALYSIS OF FERTILIZER : PART 8: METHOD FOR THE DETERMINATION OF
600 MS 417: PART 8:1997, AMD. 1:2001 FREE 3 RM -
SECONDARY PROPERTIES (FIRST REVISION)
THE ANALYSIS OF FERTILIZERS : PART 6: METHOD FOR THE DETERMINATION OF
601 MS 417 : PART 6:1994 10 RM 15.00
MAGNESIUM (FIRST REVISION)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
611 MS 418:1976 SPECIFICATION FOR TECHNICAL WARFARIN FOR RODENTICIDE PREPARATIONS 19 RM 30.00
612 MS 418:1976, AMD. 1:1985 SPECIFICATION FOR TECHNICAL WARFARIN FOR RODENTICIDE PREPARATIONS FREE 2 RM -
615 MS 421:1976 SPECIFICATION FOR TECHNICAL THIRAM FOR PESTICIDAL PREPARATIONS 13 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
616 MS 421:1976, AMD. 1:1985 SPECIFICATION FOR TECHNICAL THIRAM FOR PESTICIDAL PREPARATIONS RM -
618 MS 423:1976 SPECIFICATION FOR TECHNICAL CAPTAN FOR PESTICIDAL PREPARATIONS 14 RM 15.00
CODE OF PRACTICE FOR SAFETY IN THE MANUFACTURE AND HANDLING OF
619 MS 428:1976 (CONFIRMED:1996) 13 RM 15.00
PESTICIDES
620 MS 430:1976 (CONFIRMED:2003) SPECIFICATION FOR INK PASTE, BLACK (STENCIL, DUPLICATING - MACHINE) 21 RM 30.00
622 MS 432:1976 SPECIFICATION FOR SINGLE PACK VARNISHES FOR WOODEN PANELLING 13 RM 15.00
PALLETS FOR MATERIALS HANDLING - VOCABULARY (FIRST REVISION) (ISO
623 MS ISO 445:2010 76 RM 120.00
445:2008, IDT)
Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
624 MS EN 450-1:2014 42 RM 60.00
(First revision)
625 MS EN 450-2:2014 Fly ash for concrete - Part 2: Conformity evaluation (First revision) 31 RM 45.00
627 MS 455 : 1976 SPECIFICATION FOR GLOSSARY OF TERMS FOR ANIMAL FEEDING STUFFS 18 RM 30.00
628 MS 456 : 1976 SPECIFICATION FOR COMMON SALT FOR ANIMAL CONSUMPTION 13 RM 15.00
SURFACE ACTIVE AGENTS - ANALYSIS OF SOAPS - DETERMINATION OF FREE
629 MS ISO 456:2005 11 RM 15.00
CAUSTIC ALKALI (ISO 456:1973, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
634 MS 461:1983 (CONFIRMED:2011) CLASSIFICATION OF BUFFALO HIDES AND CALFSKINS (FIRST REVISION) 11 RM 15.00
637 MS 465 : 1976 SPECIFICATION FOR BLOOD MEAL AS AN ANIMAL FEED SUPPLEMENT 12 RM 15.00
638 MS 466:1987 METHODS OF SAMPLING AND TESTING FIELD LATEX (FIRST REVISION) 23 RM 30.00
SPECIFICATION FOR COCOA (Theobroma cacao) SEEDS FOR PLANTING (FIRST
639 MS 467 : 1993 17 RM 30.00
REVISION)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
659 MS 478 : 1999 FREIGHT CONTAINERS - TERMINOLOGY (FIRST REVISION) (ISO 830 : 1981, IDT) 24 RM 30.00
The safe handling of agricultural pesticides - Code of recommended practice
660 MS 479:2012 28 RM 45.00
(First revision)
661 MS 480:1977 CODE OF PRACTICE ON THE SAFETY LABELLING OF PESTICIDE PRODUCTS 62 RM 90.00
662 MS 485: PART 5: 1978 GLOSSARY OF PACKAGING TERMS PART 5 : GLASS CONTAINERS AND CLOSURES 56 RM 90.00
MS 485: PART 4:1976
663 GLOSSARY OF PACKAGING TERMS PART 4 : PAPER AND BOARD PACKAGING 35 RM 45.00
(CONFIRMED:2003)
SPECIFICATION AND TESTING FOR ISO SERIES 1 FREIGHT CONTAINERS : PART 7 :
664 MS 487: PART 7:1978 85 RM 120.00
AIR MODE CONTAINERS
665 MS ISO 489:2012 Plastics - Determination of refractive index (First revision) (ISO 489:1999, IDT) 20 RM 30.00
VOCABULARY RELATING TO CONTROLS, INDICATORS AND TELL-TALES OF
666 MS 493:1977 23 RM 30.00
MOTOR VEHICLES (EXCLUDING MOTOR CYCLES)
MS ISO 498:2002
667 Natural rubber latex concentrate - Preparation of dry film (ISO 498:1992, IDT) 14 RM 15.00
(CONFIRMED:2013)
SPECIFICATION FOR MAN - MADE FIBRE ROPES : POLYAMIDE (NYLON),
668 MS 504:1977 31 RM 45.00
POLYESTER AND POYETHYLENE FILAMENT ROPES
669 MS 505:2005 (CONFIRMED:2014) Iron ore for the production of pig Iron - General requirements (First revision) 11 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
670 MS 506:1977 (CONFIRMED:2004) SPECIFICATION FOR AMMONIA (ANHYDROUS AND AQUEOUS) 13 RM 15.00
674 MS 511:1977 SPECIFICATION FOR ZINC OXIDE FOR USE IN RUBBER 59 RM 90.00
675 MS 511:2008 ZINC OXIDE FOR USE IN RUBBER - SPECIFICATION (FIRST REVISION) 43 RM 60.00
SPECIFICATION FOR BITUMEN MACADAM FOR ROADS AND OTHER PAVED
676 MS 512:1977 36 RM 60.00
AREAS
SPECIFICATION FOR CARAMEL IN THE MANUFACTURE OF SOYA SAUCE (FIRST
677 MS 513:1993 21 RM 30.00
REVISION)
CARAMEL IN THE MANUFACTURE OF SOY SAUCE - SPECIFICATION (SECOND
678 MS 513:2009 33 RM 45.00
REVISION)
SPECIFICATION FOR PVC COATED FABRICS FOR UPHOLSTERY AND OTHER
679 MS 514:1977 16 RM 30.00
PURPOSES
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
695 MS 530:1977 METHODS OF TEST FOR AMMONIUM NITRATE (USED IN EXPLOSIVES) 60 RM 90.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
703 MS ISO 536 : 2001 PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536 : 1995, IDT) 11 RM 15.00
707 MS 539:2013 Standard practice for sampling bituminous materials (Second revision) 13 RM 15.00
708 MS 540:1978 METHOD OF TEST FOR LEAD IN GASOLINE, GRAVIMETRIC METHOD 12 RM 15.00
METHOD FOR DETERMINATION OF PENETRATION OF BITUMINOUS MATERIALS
709 MS 541:1995 16 RM 30.00
(FIRST REVISION)
710 MS 541:2012 Test method for penetration of bituminous materials (Second revision) 11 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
712 MS 543 : 2001 SPECIFICATION FOR THE PRODUCTION OF VEGETABLE SEEDS (FIRST REVISION) 23 RM 30.00
CODE OF PRACTICE FOR STRUCTURAL USE OF TIMBER : PART 7 : TESTING (FIRST
713 MS 544 : PART 7 : 2001 12 RM 15.00
REVISION)
CODE OF PRACTICE FOR STRUCTURAL USE OF TIMBER : PART 1 : GENERAL
714 MS 544 : PART 1 : 2001 23 RM 30.00
(FIRST REVISION)
CODE OF PRACTICE FOR STRUCTURAL USE OF TIMBER : PART 4 : TIMBER PANEL
715 MS 544 : PART 4 : SECTION 3 : 2001 15 RM 15.00
PRODUCTS : SECTION 3 : CEMENT BONDED PARTICLEBOARD (CBP)
CODE OF PRACTICE FOR STRUCTURAL USE OF TIMBER : PART 9 : FIRE
716 MS 544 : PART 9 : SECTION 1 : 2001 RESISTANCE OF TIMBER STRUCTURES: SECTION 1 : METHOD OF CALCULATING 20 RM 30.00
FIRE RESISTANCE OF TIMBER MEMBERS
CODE OF PRACTICE FOR STRUCTURAL USE OF TIMBER : PART 11 :
MS 544 : PART 11 : SECTION 1 :
717 RECOMMENDED SPAN TABLES AND THEIR CALCULATIONS : SECTION 1 : 31 RM 45.00
2001
DOMESTIC FLOOR JOISTS
CODE OF PRACTICE FOR STRUCTURAL USE OF TIMBER: PART 4 : TIMBER PANEL
718 MS 544 : PART 4 : SECTION 1 : 2001 21 RM 30.00
PRODUCTS: SECTION 1 : STRUCTURAL PLYWOOD
CODE OF PRACTICE FOR STRUCTURAL USE OF TIMBER : PART 11 :
MS 544 : PART 11 : SECTION 2 :
719 RECOMMENDED SPAN TABLES AND THEIR CALCULATIONS : SECTION 2 : CEILING 29 RM 45.00
2001
JOISTS
CODE OF PRACTICE FOR STRUCTURAL USE OF TIMBER : PART 4 : TIMBER PANEL
720 MS 544 : PART 4 : SECTION 2 : 2001 21 RM 30.00
PRODUCTS : SECTION 2 : MARINE PLYWOOD
721 MS 544 : PART 5 : 2001 CODE OF PRACTICE FOR STRUCTURAL USE OF TIMBER : PART 5 : TIMBER JOINTS 50 RM 75.00
CODE OF PRACTICE FOR STRUCTURAL USE OF TIMBER: PART 10: PRESERVATIVE
722 MS 544 : PART 10 : 2003 31 RM 45.00
TREATMENT OF STRUCTURAL TIMBER
CODE OF PRACTICE FOR STRUCTURAL USE OF TIMBER: PART 12: LAMINATED
723 MS 544: PART 12:2006 51 RM 75.00
VENEER LUMBER FOR STRUCTURAL APPLICATION
CODE OF PRACTICE FOR STRUCTURAL USE OF TIMBER : PART 2 : PERMISSIBLE
724 MS 544: PART 2: 2001 68 RM 105.00
STRESS DESIGN OF SOLID TIMBER (FIRST REVISION)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
729 MS 545:1978 SPECIFICATION FOR FRESH, CHILLED AND FROZEN BEEF 16 RM 30.00
730 MS 545:2007 FRESH, CHILLED AND FROZEN BEEF – SPECIFICATION (FIRST REVISION) 15 RM 15.00
RECOMMENDED NOMENCLATURE FOR MALAYSIAN VEGETABLES (FIRST
731 MS 546:1994 16 RM 30.00
REVISION)
732 MS 547:2014 Fresh, chilled and frozen pork - Specification (First revision) 17 RM 30.00
FRESH, CHILLED AND FROZEN LAMB, MUTTON AND GOAT MEAT -
733 MS 548:2010 13 RM 15.00
SPECIFICATION (FIRST REVISION)
RUBBER (Hevea brasiliensis L.) CLONAL PLANTING MATERIALS - SPECIFICATION
734 MS 549:2011 19 RM 30.00
(SECOND REVISION)
SPECIFICATION FOR WIRE ROPES FOR CRANES, EXCAVATORS AND GENERAL
735 MS 551:1978 41 RM 60.00
ENGINEERING PURPOSES
SPECIFICATION FOR DETERGENT POWDER FOR HAND WASH HOUSEHOLD
736 MS 553 : 2002 21 RM 30.00
LAUNDRY (FIRST REVISION)
738 MS 555: PART 1:2003 FIRE DAMPERS: PART 1: SPECIFICATION (SECOND REVISION) 30 RM 45.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
739 MS 555: PART 2:2003 FIRE DAMPERS: PART 2: INSTALLATION (SECOND REVISION) 14 RM 15.00
SPECIFICATION FOR ELECTRICAL SAFETY CODE ON PRIVATE ELECTRIC
740 MS 556 : 1989 26 RM 45.00
GENERATING PLANT (FIRST REVISION)
741 MS 560:1978 SPECIFICATION FOR MARINE SPAR VARNISH (COPAL VARNISH) 14 RM 15.00
742 MS 562:1978 (CONFIRMED:2002) GLOSSARY OF TERMS USED IN THE ADHESIVES INDUSTRY 51 RM 75.00
746 MS 565:1978 SPECIFICATION FOR MINERAL MIXTURES OR SUPPLEMENTING POULTRY FEEDS 16 RM 30.00
747 MS 570:1978 SPECIFICATION FOR HERMETICALLY SEALED METAL FOOD CANS 26 RM 45.00
748 MS 571 : 1991 SPECIFICATION FOR INGOT TIN (FIRST REVISION) 14 RM 15.00
METHOD OF TEST FOR DUCTILITY OF BITUMINOUS MATERIALS (FIRST
749 MS 572 : 1996 12 RM 15.00
REVISION)
TEST METHOD FOR GAGE VAPOR PRESSURE OF LIQUEFIED PETROLEUM (LP)
750 MS 573:2009 14 RM 15.00
GASES (LP-GAS METHOD) (SECOND REVISION)
METHODS OF TEST FOR DISTILLATION OF CUT-BACK BITUMINOUS PRODUCTS
751 MS 574:1995 17 RM 30.00
(FIRST REVISION)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
753 MS 578: 1979, AMD. 1:2009 METHOD OF SAMPLING TEXTILE FIBRES FOR TESTING FREE 1 RM -
INJECTION-MOULDED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FITTINGS
754 MS ISO 580:2003 13 RM 15.00
– OVEN TEST – TEST METHOD AND BASIC SPECIFICATIONS (ISO 580:1990, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
769 MS 591:1979 NOMENCLATURE FOR PISTONS FOR INTERNAL COMBUSTION ENGINES 13 RM 15.00
ROAD VEHICLES - RESTRAINING DEVICES FOR CHILD OCCUPANTS OF POWER-
770 MS 594:2010 134 RM 195.00
DRIVEN VEHICLES - SPECIFICATION (SECOND REVISION)
SPECIFICATION FOR SAFETY GLASS FOR MOTOR VEHICLES : PART 1 : GENERAL
771 MS 595 : PART 1:2002 25 RM 30.00
REQUIREMENTS (SECOND REVISION)
Specification for safety glass for motor vehicles: Part 1: General requirements
772 MS 595: PART 1:2002, AMD. 1:2017 FREE 3 RM -
AMENDMENT 1
SPECIFICATION FOR SAFETY-GLASS PANE FOR MOTOR VEHICLES: PART 2:
773 MS 595: PART 2:2003 58 RM 90.00
METHODS OF TEST (SECOND REVISION)
774 MS 596:2011 JAMS, FRUIT JELLIES AND MARMALADES - SPECIFICATION (FIRST REVISION) 14 RM 15.00
778 MS 599:1993 SPECIFICATION FOR FULL CREAM MILK POWDER (FIRST REVISION) 24 RM 30.00
779 MS 600:1998 SPECIFICATION FOR CORDIALS, SQUASHES AND SYRUPS (FIRST REVISION) 41 RM 60.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
781 MS 602:1979 (CONFIRMED:2011) SPECIFICATION FOR FLEXIBLE, UNSUPPORTED THICK PVC, SHEETING 31 RM 45.00
MS ISO 604:2003,
782 PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES (ISO 604:2002, IDT) 29 RM 45.00
(CONFIRMED:2011)
PALM KERNEL MEAL AS ANIMAL FEEDING STUFFS - SPECIFICATION (SECOND
783 MS 607:2007 12 RM 15.00
REVISION)
SURFACE ACTIVE AGENTS AND DETERGENTS – METHODS OF SAMPLE DIVISION
784 MS ISO 607:2004 14 RM 15.00
(ISO 607:1980, IDT)
MS ISO 611:2005 ROAD VEHICLES - BRAKING OF AUTOMOTIVE VEHICLES AND THEIR TRAILERS -
785 52 RM 75.00
(CONFIRMED:2011) VOCABULARY (ISO 611:2003, IDT)
MS ISO 612:2005 Road vehicles - Dimensions of motor vehicles and towed vehicles - Terms and
786 26 RM 45.00
(CONFIRMED:2013) definitions (ISO 612-1978, IDT)
SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS :
787 MS 616: PART 2: SECTION 2:2000 PART 2 : PARTICULAR REQUIREMENTS :SECTION 2 : REMOTE - CONTROL 20 RM 30.00
SWITCHES (RCS)
SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS :
788 MS 616 : PART 2 : SECTION 1 : 2000 41 RM 60.00
PART 2 : PARTICULAR REQUIREMENTS : SECTION 1 : ELECTRONIC SWITCHES
SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS :
789 MS 616 : PART 1 : 1998 102 RM 150.00
PART 1 : GENERAL REQUIREMENTS
MS 619-2-22:2005 Luminaires - Part 2-22: Particular requirements - Luminaires for emergency
790 32 RM 45.00
(CONFIRMED:2013) lighting (First revision) (IEC 60598-2-22:1997 and AMD. 1:2002, MOD)
Plastics piping systems for water Supply and for buried and above-ground
791 MS 628-4:2015 drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC- 16 RM 30.00
U) - Part 4: Solvent cement
SPECIFICATION FOR UNPLASTICISED PVC (uPVC) PIPES FOR WATER SUPPLY:
792 MS 628:PART 2:SECTION 2.2:1999 PART 2: JOINTS AND FITTINGS FOR USE WITH UNPLASTICISED PVC PIPES: 18 RM 30.00
SECTION 2.2: SOLVENT CEMENT
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
805 MS 636:2012 Threaded pipe fittings in malleable cast iron (First revision) 44 RM 60.00
PAPER, BOARD AND PULPS - DETERMINATION OF DRY MATTER CONTENT -
806 MS ISO 638:2009 17 RM 30.00
OVEN-DRYING METHOD (FIRST REVISION) (ISO 638:2008, IDT)
MS ISO 639-3:2010 Codes for the representation of names of languages - Part 3: Alpha-3 code for
807 23 RM 30.00
(CONFIRMED:2015) comprehensive coverage of languages (ISO 639-3:2007, IDT)
MS ISO 639-1:2010 Codes for the representation of names of languages - Part 1: Alpha-2 code (First
808 48 RM 75.00
(CONFIRMED:2015) revision) (ISO 639-1:2002, IDT)
MS ISO 639-2:2010 Codes for the representation of names of languages - Part 2: Alpha-3 code (First
809 76 RM 120.00
(CONFIRMED:2015) revision) (ISO 639-2:1998, IDT)
MS ISO 639-5:2010 Codes for the representation of names of languages - Part 5: Alpha-3 code for
810 34 RM 45.00
(CONFIRMED:2015) language families and groups (ISO 639-5:2008, IDT)
SPECIFICATION FOR LPG CYLINDERS UP TO 1000 POUNDS WATER CAPACITY
811 MS 641 : 1982 15 RM 15.00
WITHOUT ELECTRIC-ARC WELDEDLONGITUDINAL SEAM
SPECIFICATION FOR LPG CYLINDERS UP TO 1000 POUNDS WATER CAPACITY
812 MS 642 : 1982 20 RM 30.00
WITH ELECTRIC-ARC WELDED LONGITUDINAL SEAM
813 MS 643:1980 GLOSSARY OF TERMS USED IN THE FERTILIZER TRADE AND INDUSTRY 20 RM 30.00
GLOSSARY OF TERMS USED IN THE FERTILIZER TRADE AND INDUSTRY (FIRST
814 MS 643:2003 19 RM 30.00
REVISION)
816 MS 645:2010 ETHANOL FOR INDUSTRIAL USE - SPECIFICATION (FIRST REVISION) 12 RM 15.00
818 MS 647 : 1999 SPECIFICATION FOR SODIUM HYPOCHLORITE SOLUTIONS (FIRST REVISION) 15 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
819 MS 648:1980 METHOD OF TEST FOR FLASH - POINT BY THE ABEL APPARATUS 16 RM 30.00
METHOD OF TEST FOR RELATIVE DENSITY OF SOLID PITCH AND BITUMEN -
820 MS 650 : 1995 11 RM 15.00
DISPLACEMENT METHOD (FIRST REVISION)
LIMESTONE FOR MAKING COLOURLESS GLASSES - SPECIFICATION (FIRST
821 MS 651:2011 13 RM 15.00
REVISION)
SPECIFICATION FOR PENTACHLOROPHENOL FOR USE IN THE PRESERVATION OF
822 MS 652 : 1980 13 RM 15.00
TIMBER
826 MS 659 : 1980 SPECIFICATION FOR FENITROTHION TECHNICAL FOR PESTICIDAL PREPARATIONS 12 RM 15.00
827 MS 660 : 1980 SPECIFICATION FOR TRICHLORFON TECHNICAL FOR PESTICIDAL PREPARATIONS 12 RM 15.00
SPECIFICATION FOR DICALCIUM PHOSPHATE AND TRICALCIUM PHOSPHATE :
828 MS 662 : 1980 10 RM 15.00
ANIMAL FEED GRADE
829 MS 663 : 1980 SPECIFICATION FOR MINERAL MIXTURES FOR SUPPLEMENTING CATTLE FEEDS 12 RM 15.00
ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF INSOLUBLE
830 MS ISO 663:2009 16 RM 30.00
IMPURITIES CONTENT (ISO 663:2007, IDT)
832 MS 665 : 1980 SPECIFICATION FOR FENITROTHION WATER DISPERSIBLE POWDERS 12 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
833 MS 665:1980, AMD. 1:1985 SPECIFICATION FOR FENITROTHION WATER DISPERSIBLE POWDERS FREE 1 RM -
834 MS 666 : 1980 SPECIFICATION FOR TRICHLORFON WATER SOLUBLE POWDERS 11 RM 15.00
835 MS 666:1980, AMD. 1:1985 SPECIFICATION FOR TRICHLORFON WATER SOLUBLE POWDERS FREE 1 RM -
SERIES 1 FREIGHT CONTAINERS - CLASSIFICATION, DIMENSIONS AND RATINGS
836 MS ISO 668:2009 24 RM 30.00
(FIRST REVISION) (ISO 668:1995, AMD. 1:2005, AMD. 2:2005, IDT)
837 MS 671:2014 Elastomeric bridge bearings - Specification and design (Third revision) 93 RM 135.00
SOAPS - DETERMINATION OF MOISTURE AND VOLATILE MATTER CONTENT -
838 MS ISO 672:2006 10 RM 15.00
OVEN METHOD (ISO 672:1978, IDT)
Rubber seals in water supply, drainage and sewerage pipelines - Part 1:
839 MS 672-1:2012 26 RM 45.00
Specification for vulcanized rubber (Second revision)
Rubber seals in water supply, drainage and sewerage pipelines - Part 2:
840 MS 672-2:2012 13 RM 15.00
Specification for cast polyurethane sealing elements
841 MS 673:1988 SPECIFICATION FOR CANNED SWEET CORN (FIRST REVISION) 16 RM 30.00
SOAPS – DETERMINATION OF CONTENT OF ETHANOL-INSOLUBLE MATTER (ISO
842 MS ISO 673:2004 9 RM 15.00
673:1981, IDT)
843 MS 675:1988 SPECIFICATION FOR CANNED FISH IN TOMATO SAUCE (FIRST REVISION) 32 RM 45.00
844 MS 676:2001 (CONFIRMED:2008) SPECIFICATION FOR PLASTICS BUCKETS (FIRST REVISION) 12 RM 15.00
845 MS 676:2001, AMD. 1:2014 SPECIFICATION FOR PLASTICS BUCKETS (FIRST REVISION) FREE 2 RM -
846 MS 677: PT. I TO VIII:1980 RECOMMENDED METHODS FOR PLANT CHEMICAL ANALYSIS (PART I TO VIII) 17 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Latex foam rubber mattresses for domestic and general use - Specification
847 MS 679:2011 21 RM 30.00
(Second revision)
856 MS 688 : 1981 SPECIFICATION FOR BARYTES USED IN OIL-WELL DRILLING 18 RM 30.00
SPECIFICATION FOR BITUMEN-BASED FILLING COMPOUNDS FOR ELECTRICAL
857 MS 689:1981 32 RM 45.00
PURPOSES
METHOD FOR THE DETERMINATION OF ELONGATION OF NETTING YARNS FOR
858 MS 690:1981 (CONFIRMED:1996) 16 RM 30.00
FISHING NETS
859 MS 692:2007 (M) BATIK MALAYSIA (KRAFTANGAN) – SPESIFIKASI (ULANGKAJI PERTAMA) 27 RM 45.00
860 MS ISO 692 : 2002 PULPS – DETERMINATION OF ALKALI SOLUBILITY (ISO 692 : 1982, IDT) 13 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
862 MS 695 : 1981 SPECIFICATION FOR NITRO-CELLULOSE LACQUER FOR USE ON WOOD, INDOORS 20 RM 30.00
863 MS 696 : 1981 SPECIFICATION FOR COAL TAR CREOSOTE FOR THE PRESERVATION OF TIMBER 25 RM 30.00
864 MS 697 : 1981 GUIDE TO THE CHOICE, USE AND APPLICATION OF WOOD PRESERVATIVES 24 RM 30.00
ALUMINIUM SULPHATE FOR USE IN POTABLE WATER SUPPLY - SPECIFICATION
865 MS 699:2008 40 RM 60.00
(SECOND REVISION)
866 MS ISO 699 : 2002 PULPS – DETERMINATION OF ALKALI RESISTANCE (ISO 699 : 1982, IDT) 13 RM 15.00
867 MS 700 : 1981 SPECIFICATION FOR SODIUM HYDROXIDE (TECHNICAL GRADES) 48 RM 75.00
874 MS 714:2001 SPECIFICATION FOR PACKAGED PINEAPPLE JUICE (FIRST REVISION) 29 RM 45.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
882 MS 731 : 1981 SPECIFICATION FOR ENDOSULFAN TECHNICAL FOR PESTICIDAL PREPARATIONS 10 RM 15.00
883 MS 732:1981 PAPER, BOARD, PULP AND RELATED TERMS - VOCABULARY 44 RM 60.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
897 MS 746:1981 (CONFIRMED:2006) SPECIFICATION FOR PHOTOGRAPHIC GRADE SODIUM SULPHITE, ANHYDROUS 22 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
907 MS 759:1982 SPECIFICATION FOR CLOVES, WHOLE AND GROUND (POWDERED) 12 RM 15.00
VOLATILE ORGANIC LIQUIDS FOR INDUSTRIAL USE - DETERMINATION OF DRY
908 MS ISO 759:2010 RESIDUE AFTER EVAPORATION ON A WATER BATH - GENERAL METHOD (ISO 10 RM 15.00
759:1981, IDT)
909 MS 760:1982 SPECIFICATION FOR SKIMMED MILK POWDER / NON - FAT DRIED MILK 22 RM 30.00
CODE OF PRACTICE FOR THE STORAGE AND HANDLING OF FLAMMABLE AND
910 MS 761:1982 94 RM 135.00
COMBUSTIBLE LIQUIDS
CODE OF PRACTICE FOR THE STORAGE AND HANDLING OF FLAMMABLE AND
911 MS 761 : 1982, AMD. 1:1986 FREE 2 RM -
COMBUSTIBLE LIQUIDS
PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS – UNPLASTICISED
912 MS 762:2007 POLY(VINYL CHLORIDE) (PVC-U) – SPECIFICATIONS FOR COMPONENTS AND THE 55 RM 75.00
SYSTEM (FIRST REVISION)
PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - UNPLASTICISED
913 MS 762:2007, AMD. 1:2010 POLY(VINYL CHLORIDE) (PVC-U) - SPECIFICATIONS FOR COMPONENTS AND THE FREE 2 RM -
SYSTEM (FIRST REVISION)
PESTICIDES CONSIDERED NOT TO REQUIRE COMMON NAMES (ISO 765:1976,
914 MS ISO 765:2006 23 RM 30.00
IDT)
LOW - FREQUENCY COMMUNICATION CABLES AND WIRES WITH PVC
915 MS 766 : PART 1 : 1982 INSULATION AND PVC SHEATH : PART 1 : GENERAL TESTS AND MEASURING 17 RM 30.00
METHODS
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
922 MS 775:2005 (CONFIRMED:2011) LPG fuel system in internal combustion engines - Specification (First revision) 35 RM 45.00
923 MS ISO 776:2012 Pulps - Determination of acid-insoluble ash (First revision) (ISO 776:2011, IDT) 14 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
931 MS 782:2012 Test method for kinematic viscosity of asphalts (Bitumens) (Second revision) 17 RM 30.00
METHOD OF TEST FOR VISCOSITY OF BITUMENS BY VACUUM CAPILLARY
932 MS 783 : 1997 22 RM 30.00
VISCOMETERS (FIRST REVISION)
Test method for viscosity of asphalts by vacuum capillary viscometer (Second
933 MS 783:2012 16 RM 30.00
revision)
934 MS 784:1982 METHOD OF TEST FOR ENGLER SPECIFIC VISCOSITY OF TAR PRODUCTS 14 RM 15.00
TEST METHOD FOR OXIDATION STABILITY OF GASOLINE (INDUCTION PERIOD
935 MS 786:2005 (CONFIRMED:2011) 13 RM 15.00
METHOD) (FIRST REVISION)
Test method for corrosiveness to copper from petroleum products by copper
936 MS 787:2012 22 RM 30.00
strip test (Second revision)
937 MS 788:2012 Test method for gum content in fuels by jet evaporation (Second revision) 14 RM 15.00
TEST METHOD FOR GUM CONTENT IN FUELS BY JET EVAPORATION (FIRST
938 MS 788:2005 15 RM 15.00
REVISION)
Test method for sediment in crude oils and fuel oils by the extraction method
939 MS 790:2012 16 RM 30.00
(Second revision)
Liquid detergent for household hand dish washing - Specification (Second
940 MS 791:2014 16 RM 30.00
revision)
942 MS 795-2:2011 WC FLUSHING CISTERNS - PART 2: INLET VALVES (SECOND REVISION) 14 RM 15.00
943 MS 795-3:2011 WC FLUSHING CISTERNS - PART 3: FLUSHING DEVICE (SECOND REVISION) 15 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
949 MS 809:2018 Groundnut seeds for planting - Specification (Second revision) 12 RM 15.00
950 MS 809:2007 GROUNDNUT SEEDS FOR PLANTING – SPECIFICATON (FIRST REVISION) 11 RM 15.00
Composite maize and sweet corn (Zea mays) seeds for planting - Specification
951 MS 810:2017 12 RM 15.00
(Second revision)
Composite or open - Pollinated maize seeds for planting - Specification (First
952 MS 810:2007 (CONFIRMED:2015) 11 RM 15.00
revision)
Hybrid maize and sweet corn (Zea mays) seeds for planting - Specification
953 MS 811:2017 13 RM 15.00
(Second revision)
HYBRID CORN OR MAIZE SEEDS FOR PLANTING - SPECIFICATION (FIRST
954 MS 811:2007 11 RM 15.00
REVISION)
957 MS 814:2007, AMD. 1:2018 Palm oil - Specification (Second revision) FREE 2 RM -
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
METHOD OF TEST FOR PALM OIL AND PALM OIL PRODUCTS : PART 3:
970 MS 817: PART 3:1998 16 RM 30.00
DETERMINATION OF IODINE VALUE (SECOND REVISION) (ISO 3961:1996, IDT)
METHODS OF TEST FOR PALM OIL AND PALM OIL PRODUCTS : PART 7:
971 MS 817: PART 7: SEC. 1:2001 DETERMINATION OF UNSAPONIFIABLE MATTER : SECTION 1: METHOD USING 13 RM 15.00
DIETHYL ETHER EXTRACTION (REFERENCE METHOD)(ISO 3596:2000, IDT)
PALM OIL AND PALM OIL PRODUCTS: PART 11: DETERMINATION OF
972 MS 817: PART 11:2004 15 RM 15.00
PEROXIDEVALUE (ISO 3960:1998, MOD)
PALM OIL AND PALM OIL PRODUCTS : PART 12: DETERMINATION OF LOVIBOND
973 MS 817: PART 12:2004 15 RM 15.00
COLOUR (ISO 15305:1998, MOD)
METHODS OF TEST FOR PALM OIL AND PALM OIL PRODUCTS : PART 8 :
974 MS 817: PART 8: SEC. 1:2001 DETERMINATION OF TRIACYLGLYCEROL BY GAS CHROMATOGRAPHY : SECTION 11 RM 15.00
1 : TRIACYLGLYCEROL COMPOSITION BY CARBON NUMBER
METHODS OF TEST FOR PALM OIL AND PALM OIL PRODUCTS : PART 7:
975 MS 817: PART 7: SEC. 2:2001 DETERMINATION OF UNSAPONIFIABLE MATTER : SECTION 2: RAPID METHOD 17 RM 30.00
USING HEXANE EXTRACTION (ISO 18609:2000, IDT)
PALM OIL AND PALM OIL PRODUCTS - METHODS OF TEST - PART 1:
976 MS 817:2007 9 RM 15.00
PREPARATION OF TEST SAMPLE (SECOND REVISION)
977 MS 818:1983 SPECIFICATION FOR ICE USED IN THE FISH AND PRAWN INDUSTRY 9 RM 15.00
978 MS 819:2010 SODIUM METABISULPHITE, FOOD GRADE - SPECIFICATION (FIRST REVISION) 21 RM 30.00
979 MS 820:1983 (CONFIRMED:2006) SPECIFICATION FOR SODIUM METABISULPHITE, TECHNICAL GRADE 17 RM 30.00
COPPER/CHROME/ARSENIC TREATED TIMBER AND PRESERVATIVE
980 MS 821:2011 14 RM 15.00
FORMULATIONS - QUANTITATIVE ANALYSIS (SECOND REVISION)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
992 MS 827:2002 SPARK PLUGS FOR INTERNAL COMBUSTION ENGINES (FIRST REVISION) 33 RM 45.00
993 MS 828:2011 (CONFIRMED:2016) Road vehicles - Rear and side marking - Specification (Second revision) 26 RM 45.00
995 MS ISO 830:2007 FREIGHT CONTAINERS-VOCABULARY (ISO 830:1999/CORR. 1:2001, IDT) 44 RM 60.00
Storage, handling and transportation of liquefied petroleum gases (LPG) - Code
996 MS 830:2013 160 RM 225.00
of practice (Third revision)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Valves for use in liquefied petroleum gas (LPG) cylinders - Specification (First
997 MS 831:2007, AMD. 1:2013 FREE 1 RM -
revision) AMENDMENT 1
VALVES FOR USE IN LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS -
998 MS 831:2007 24 RM 30.00
SPECIFICATION (FIRST REVISION)
1005 MS 837:2006 SOLID TIMBER – DETERMINATION OF MOISTURE CONTENT (FIRST REVISION) 24 RM 30.00
CODE OF PRACTICE FOR RADIATION PROTECTION - MEDICAL X-RAY DIAGNOSIS
1006 MS 838:2007 56 RM 90.00
(FIRST REVISION)
Radiation protection for medical diagnostic X-ray - Code of practice (Second
1007 MS 838:2018 53 RM 75.00
revision)
CODE OF PRACTICE FOR THE RECEPTION OF SOUND AND TELEVISION
1008 MS 839 : 1983 38 RM 60.00
BROADCASTING
1009 MS 840 : 1983 RECOMMENDED METHODS FOR SOIL PHYSICAL ANALYSIS 36 RM 60.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1012 MS 844:1983 (CONFIRMED:2014) Methods of chemical analysis of ferrosilicon and ferromanganese 21 RM 30.00
1013 MS 846 : 1983 METHOD FOR BURNING TEST(24-HOUR) FOR KEROSENE 12 RM 15.00
1014 MS 847 : 1983 SPECIFICATION FOR SILICA SAND FOR THE MANUFACTURE OF SODIUM SILICATE 20 RM 30.00
SAMPLING, SAMPLE PREPARATION, PACKAGING AND MARKING OF LIME AND
1015 MS 849:2007 24 RM 30.00
LIMESTONE PRODUCTS (FIRST REVISION)
LIMESTONE, QUICKLIME AND HYDRATED LIME - METHODS FOR CHEMICAL
1016 MS 850:2010 102 RM 150.00
ANALYSIS (SECOND REVISION)
1017 MS 851:2014 Phosphoric acid, food grade - Specification (First revision) 42 RM 60.00
1018 MS 852:2010 PHOSPHORIC ACID - TECHNICAL GRADE - SPECIFICATION (FIRST REVISION) 11 RM 15.00
1020 MS 854 : 1983 SPECIFICATION FOR BALL-POINT PENS AND REFILLS 16 RM 30.00
1022 MS 856 : 1983 SPECIFICATION FOR ENVELOPES FOR STORAGE OF PROCESSED X-RAY FILMS 12 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1033 MS 871 : 2001 SPECIFICATION FOR MALAYSIAN COCOA POWDER (SECOND REVISION) 13 RM 15.00
1034 MS 872 : 1990 SPECIFICATION FOR CANNED BEEF CURRY (FIRST REVISION) 16 RM 30.00
POWDERED ACTIVATED CARBON FOR USE IN POTABLE WATER SUPPLY –
1035 MS 873:2005 21 RM 30.00
SPECIFICATION (FIRST REVISION)
TEST METHOD FOR SULFUR IN LIQUEFIED PETROLEUM GASES (OXY-HYDROGEN
1036 MS 875:2008 18 RM 30.00
BURNER OR LAMP) (SECOND REVISION)
SPECIFICATION FOR PRESSURE SENSITIVE POLYVINYL CHLORIDE ADHESIVE
1037 MS 876 : 1984 27 RM 45.00
TAPES FOR ELECTRICAL INSULATION
PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL
1038 MS ISO 877-1:2010 23 RM 30.00
GUIDANCE (FIRST REVISION) (ISO 877-1:2009, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1039 MS 877 : 1984 METHODS OF SAMPLING COPPER ORES AND CONCENTRATES 24 RM 30.00
PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: DIRECT
1040 MS ISO 877-2:2010 WEATHERING AND EXPOSURE BEHIND WINDOW GLASS (FIRST REVISION) (ISO 14 RM 15.00
877-2:2009, IDT)
PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3:
1041 MS ISO 877-3:2010 INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION (FIRST 30 RM 45.00
REVISION) (ISO 877-3:2009, IDT)
1042 MS 878 : 1984 SPECIFICATION FOR COPPER NAPHTHENATE WOOD PRESERVATIVE 16 RM 30.00
1043 MS 879:1984 (CONFIRMED:2006) SPECIFICATION FOR SODIUM SULPHITE, TECHNICAL GRADE 16 RM 30.00
METHOD OF TEST FOR PHOSPHORIC ACID PART 4 : DETERMINATION OF
1044 MS 880 : PART 4 : 1985 16 RM 30.00
ARSENIC CONTENT
METHODS OF TEST FOR PHOSPHORIC ACID PART 2 : DETERMINATION OF
1045 MS 880 : PART 2 : 1984 12 RM 15.00
OXIDES OF NITROGEN CONTENT
METHODS OF TEST FOR PHOSPHORIC ACID PART 8 : DETERMINATION OF
1046 MS 880 : PART 8 : 1987 12 RM 15.00
COPPER CONTENT
METHOD OF TEST FOR PHOSPHORIC ACID PART 7 : DETERMINATION OF LEAD
1047 MS 880 : PART 7 : 1985 12 RM 15.00
CONTENT : ATOMIC ABSORPTION SPECTRO-PHOTOMETRIC METHOD
METHODS OF TEST FOR PHOSPHORIC ACID PART 6 : DETERMINATION OF
1048 MS 880 : PART 6 : 1985 16 RM 30.00
CHLORIDE CONTENT
METHODS OF TEST FOR PHOSPHORIC ACID PART 5 : DETERMINATION OF
1049 MS 880 : PART 5 : 1985 12 RM 15.00
SULPHATE CONTENT
METHODS OF TEST FOR PHOSPHORIC ACID PART 1 : DETERMINATION OF TOTAL
1050 MS 880 : PART 1 : 1985 14 RM 15.00
PHOSPHOROUS (V) OXIDE CONTENT
METHODS OF TEST FOR PHOSPHORIC ACID PART 3 : DETERMINATION OF IRON
1051 MS 880 : PART 3 : 1985 15 RM 15.00
CONTENT
Methods of test for phosphoric acid - Part 9: Determination of impurities - Limit
1052 MS 880-9:2012 15 RM 15.00
test
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1061 MS 889 : 2001 SPECIFICATION FOR TURMERIC, WHOLE AND GROUND (FIRST REVISION) 16 RM 30.00
1062 MS 890 : 1995 SPECIFICATION FOR CURRY POWDER (FIRST REVISION) 12 RM 15.00
Curry powder and mixed spices - Specification and test methods (Second
1063 MS 890:2017 13 RM 15.00
revision)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1072 MS 896 : 1984 METHOD OF SAMPLING FOR SWEETS AND CONFECTIONERY 12 RM 15.00
1075 MS 898 : 1998 SPECIFICATION FOR DRY-SALTED ANCHOVIES (IKAN BILIS) (SECOND REVISION) 10 RM 15.00
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY
1076 MS ISO 898-5 : 2003 STEEL – PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS NOT UNDER 16 RM 30.00
TENSILE STRESSES (ISO 898-5:1998, IDT)
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY
1077 MS ISO 898-1:2003 37 RM 60.00
STEEL – PART 1: BOLTS, SCREWS AND STUDS (ISO 898-1:1999, IDT)
MECHANICAL PROPERTIES OF FASTENERS – PART 2: NUTS WITH SPECIFIED
1078 MS ISO 898-2:2003 26 RM 45.00
PROOFLOAD VALUES – COARSE THREAD (ISO 898-2:1992, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1085 MS 903 : 1984 SPECIFICATION FOR LATEX EMULSION PAINT FOR INTERIOR USE 12 RM 15.00
PAINTS AND VARNISHES - TERMS AND DEFINITIONS (FIRST REVISION) (ISO
1086 MS 904:2010 46 RM 75.00
4618:2006, IDT)
1087 MS 905 : 1984 SPECIFICATION FOR WHITE SPIRIT FOR PAINTS AND OTHER PURPOSES 16 RM 30.00
METHOD OF SAMPLING FOR BAUXITE USE IN THE PRODUCTION OF
1088 MS 907 : 1987 32 RM 45.00
ALUMINIUM (FIRST REVISION)
Synthetic resin adhesives (phenolic and aminoplastic) for plywood -
1089 MS 908:2012 23 RM 30.00
Specification (First revision)
SPECIFICATION FOR COMPOUND FERTILIZER, PREMIUM GRADE (FIRST
1090 MS 909 : 1994 13 RM 15.00
REVISION)
METHOD OF TEST FOR KNOCK CHARATERISTICS OF MOTOR AND AVIATION
1091 MS 910 : 1984 42 RM 60.00
FUELS BY THE MOTOR METHOD
TEST METHOD FOR MOTOR OCTANE NUMBER OF SPARK-IGNITION ENGINE
1092 MS 910:2008 64 RM 90.00
FUEL (FIRST REVISION)
Test method for research octane number of spark-ignition engine fuel (Second
1093 MS 911:2013 54 RM 75.00
revision)
TEST METHOD FOR LEAD IN GASOLINE - IODINE MONOCHLORIDE METHOD
1094 MS 912:2008 10 RM 15.00
(FIRST REVISION)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1095 MS 913:2012 Automotive gear lubricating oils - Specification (First revision) 14 RM 15.00
1096 MS 915 : 1985 SPECIFICATION FOR SODIUM BENZOATE, FOOD GRADE 18 RM 30.00
1102 MS 924 : 1984 SPECIFICATION FOR METAL SINKS FOR DOMESTIC PURPOSES 18 RM 30.00
1103 MS 926 : 1984 SPECIFICATION FOR HEADLAMPS FOR PEDAL CYCLES 16 RM 30.00
Installation of fuel gas piping systems and appliances - Code of practice (Second
1104 MS 930:2017 334 RM 480.00
revision)
CODE OF PRACTICE FOR THE INSTALLATION OF FUEL GAS PIPING SYSTEMS AND
1105 MS 930:2010 310 RM 450.00
APPLIANCES (FIRST REVISION)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1109 MS 932 : 1984 SPECIFICATION FOR REAR VIEW MIRRORS FOR MOTOR-CYCLES 14 RM 15.00
Tests for general properties of aggregates - Part 5: Common equipment and
1110 MS EN 932-5:2011 24 RM 30.00
calibration (Second revision)
MS EN 932-3:2011 Tests for general properties of aggregates - Part 3: Procedure and terminology
1111 13 RM 15.00
(CONFIRMED:2015) for simplified petrographic description
MS EN 932-2:2011 Tests for general properties of aggregates - Part 2: Methods for reducing
1112 19 RM 30.00
(CONFIRMED:2015) laboratory samples (Second revision)
1113 MS 932:2014 Motorcycles - Rear view mirrors - Specification and installation (First revision) 35 RM 45.00
MS EN 933-11:2011 Tests for geometrical properties of aggregates - Part 11 : Classification test for
1114 20 RM 30.00
(CONFIRMED:2015) the constituents of coarse recycled aggregate
MS EN 933-9:2011 Tests for geometrical properties of aggregates - Part 9: Assessment of fines -
1115 21 RM 30.00
(CONFIRMED:2015) Methylene blue test
MS EN 933-10:2011 Tests for geometrical properties of aggregates - Part 10 : Assessment of fine -
1116 17 RM 30.00
(CONFIRMED:2015) Grading of filler aggregates (air jet sieving)
MS EN 933-7:2011 Tests for geometrical properties of aggregates - Part 7: Determination of shell
1117 14 RM 15.00
(CONFIRMED:2015) content - Percentage of shells in coarse aggregates (Second revision)
Tests for geometrical properties of aggregates - Part 1: Determination of
1118 MS EN 933-1:2011 19 RM 30.00
particle size distribution - Sieving method (Second revision)
MS EN 933-2:2011 Tests for geometrical properties of aggregates - Part 2: Determination of
1119 10 RM 15.00
(CONFIRMED:2015) particle size distribution - Test sieves, nominal size of apertures
Tests for geometrical properties of aggregates - Part 8: Assessment of fines -
1120 MS EN 933-8:2011 15 RM 15.00
Sand equivalent test
Tests for geometrical properties of aggregates: Part 3: Determination of particle
1121 MS EN 933-3:2011 17 RM 30.00
shape - Flakiness index (Second revision)
MS EN 933-4:2011 Tests for geometrical properties of aggregates - Part 4: Determination of
1122 18 RM 30.00
(CONFIRMED:2015) particle shape - Shape index
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1130 MS 935 : 1984 CODE OF PRACTICE FOR LOADING GUIDE FOR OIL - IMMERSED TRANSFORMERS 53 RM 75.00
1131 MS ISO 936:2012 Meat and meat products - Determination of total ash (ISO 936:1998, IDT) 14 RM 15.00
SPECIFICATION FOR STANDARD TEST FINGERS AND PROBES FOR CHECKING
1132 MS 937 : 1984 20 RM 30.00
PROTECTION AGAINST ELECTRICAL, MECHANICAL AND THERMAL HAZARDS
SPECIFICATION FOR CLASSIFICATION OF MATERIALS FOR THE INSULATION OF
1133 MS 938 : 1984 ELECTRICAL MACHINERY AND APPARATUS IN RELATION TO THEIR THERMAL 16 RM 30.00
STABILITY IN SERVICE
1134 MS 945 : 1984 SPECIFICATION FOR EARTH AND BONDING CLAMPS 17 RM 30.00
Microstructure of cast irons - Part 1: Graphite classification by visual analysis
1135 MS ISO 945-1:2012 28 RM 45.00
(First revision) (ISO 945-1:2008, COR. 1:2010, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1136 MS 947 : 1984 SPECIFICATION FOR PHOTOELECTRIC CONTROL UNITS FOR ROAD LIGHTING 26 RM 45.00
1137 MS 949 : 1984 CODE OF PRACTICE FOR SAFETY IN WELDING AND CUTTING 38 RM 60.00
1140 MS 952:2012 Canned processed peas in brine - Specification (First revision) 19 RM 30.00
METHODS OF TEST FOR MEAT AND MEAT PRODUCTS : PART 13 :
1141 MS 954 : PART 13 : 1989 16 RM 30.00
DETERMINATION OF METAL CONTAMINATION
METHODS OF TEST FOR MEAT AND MEAT PRODUCTS : PART 15 :
1142 MS 954 : PART 15 : 1988 16 RM 30.00
DETERMINATION OF NITRATE CONTENT
METHODS OF TEST FOR MEAT AND MEAT PRODUCTS : PART 16 : DETECTION OF
1143 MS 954 : PART 16 : 1988 16 RM 30.00
POLYPHOSPHATES
METHODS OF TEST FOR MEAT AND MEAT PRODUCTS : PART 14 :
1144 MS 954 : PART 14 : 1988 12 RM 15.00
DETERMINATION OF NITRITE CONTENT
1147 MS 958 : 1985 SPECIFICATION FOR CITRIC ACID (FOOD GRADE) 20 RM 30.00
TEST METHOD FOR WATER AND SEDIMENT IN FUEL OILS BY THE CENTRIFUGE
1148 MS 961:2008 14 RM 15.00
METHOD (LABORATORY PROCEDURE) (FIRST REVISION)
Test method for conradson carbon residue of petroleum products (Second
1149 MS 962:2012 15 RM 15.00
revision)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1150 MS 964 : 1985 SPECIFICATION FOR RESIN FLUX CORED SOLDER 12 RM 15.00
1158 MS 966 : PART 3 : 2001 PLAYGROUND EQUIPMENT :PART 3 : TEST METHODS (FIRST REVISION) 35 RM 45.00
PLAYGROUND EQUIPMENT : PART 1 : SPECIFICATIONS FOR MATERIALS (FIRST
1159 MS 966 : PART 1 : 2001 17 RM 30.00
REVISION)
Playground equipment - Safety performance for public use - Specification
1160 MS 966:2017 101 RM 150.00
(Second revision)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1164 MS 971:1985 (CONFIRMED:2009) SPECIFICATION FOR NON-PRESSURE KEROSENE STOVES FOR DOMESTIC USE 21 RM 30.00
1165 MS 972 : 1998 SPECIFICATION FOR SOLID RUBBER FLOORING (FIRST REVISION) 15 RM 15.00
1166 MS 973 : 2002 SPECIFICATION FOR RUBBER BANDS (FIRST REVISION) 11 RM 15.00
1167 MS 974 : 2002 SPECIFICATION FOR RUBBER SWIMMING FINS (FIRST REVISION) 13 RM 15.00
MS ISO 974:2003 PLASTICS - DETERMINATION OF THE BRITTLENESS TEMPERATURE BY IMPACT
1168 18 RM 30.00
(CONFIRMED:2011) (ISO 974:2000, IDT)
1169 MS 978 : 1985 SPECIFICATION FOR PLASTICS WASTE PIPE AND FITTINGS 44 RM 60.00
SPECIFICATION FOR UNPLASTICIZED PVC UNDERGROUND SEWERAGE PIPE AND
1170 MS 979 : PART 1 : 1985 35 RM 45.00
FITTINGS PART 1 : PIPES OF DIAMETER 100 MILLIMETRE AND 155 MILLIMETRE
SPECIFICATION FOR UNPLASTICIZED PVC UNDERGROUND SEWERAGE PIPES
1171 MS 979: PART 2:1985 28 RM 45.00
AND FITTINGS PART 2 : PIPES OF DIAMETER 200 MILLIMETRES AND ABOVE
SPECIFICATION FOR UNPLASTICIZED PVC UNDERGROUND SEWERAGE PIPES
1172 MS 979: PART 2:1985, AMD. 1:2000 FREE 1 RM -
AND FITTINGS PART 2 : PIPES OF DIAMETER200 MILLIMETRES AND ABOVE
1173 MS 982 : 1985 SPECIFICATION FOR FIRE SAFETY SIGNS, NOTICES AND GRAPHIC SYMBOLS 18 RM 30.00
‘KELUAR’ SIGNS (INTERNALLY ILLUMINATED) - SPECIFICATIONS (THIRD
1174 MS 983:2004 27 RM 45.00
REVISION)
1175 MS 987:2007 COMBINED SOILED AND CLEAN LINEN – SPECIFICATION (FIRST REVISION) 10 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1176 MS 988 : 1985 CODE OF PRACTICE FOR PACKAGING : UNIT LOAD SIZES : DIMENSIONS 11 RM 15.00
CODE OF PRACTICE FOR PACKAGING : COMPLETE, FILLED TRANSPORT
1177 MS 989 : PART 4 : 1985 12 RM 15.00
PACKAGES PART 4 : VERTICAL IMPACT TEST BY DROPPING
CODE OF PRACTICE FOR PACKAGING : COMPLETE, FILLED TRANSPORT
1178 MS 989 : PART 11 : 1985 12 RM 15.00
PACKAGES PART 11 : ROLLING TEST
CODE OF PRACTICE FOR PACKAGING : COMPLETE, FILLED TRANSPORT
1179 MS 989 : PART 1 : 1985 9 RM 15.00
PACKAGES PART 1 : IDENTIFICATION OF PARTS WHEN TESTING
Specification for hospital trolleys for instruments, dressings and anaesthetists'
1180 MS 991:1985 (CONFIRMED:2015) 15 RM 15.00
use
SPECIFICATION FOR HOSPITAL CABINETS FOR POISONS AND DANGEROUS
1181 MS 992 : 1985 16 RM 30.00
DRUGS
1183 MS 994 : 1990 SPECIFICATION FOR WATER FOR LEAD-ACID BATTERIES 12 RM 15.00
1188 MS 997 : 1986 SPECIFICATION FOR CANNED BEANS IN TOMATO SAUCE 24 RM 30.00
1189 MS 997:2009 CANNED BAKED BEANS IN TOMATO SAUCE - SPECIFICATION (FIRST REVISION) 20 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1191 MS 999 : 1989 SPECIFICATION FOR CANNED CHICKEN CURRY (FIRST REVISION) 16 RM 30.00
1192 MS 1000:2003 SPECIFICATION FOR SOYA BEAN MILK AND DRINK (FIRST REVISION) 25 RM 30.00
SPECIFICATION FOR DRIED CHILLIES IN GROUND (POWDERED) FORM (FIRST
1193 MS 1001:2002 21 RM 30.00
REVISION)
1194 MS 1002:1986 SPECIFICATION FOR SURFACE BRUSH-ON PRESERVATIVE STAINS FOR WOOD 20 RM 30.00
1195 MS 1003:1986 SPECIFICATION FOR FORMALDEHYDE SOLUTION FOR INDUSTRIAL USE 12 RM 15.00
1197 MS 1005:1986 METHODS OF CHEMICAL ANALYSIS OF WHITE METAL BEARING ALLOYS 36 RM 60.00
1198 MS 1006:1986 METHODS OF TEST FOR RESIN FLUX CORED SOLDER 16 RM 30.00
Mixing water for concrete - Specification for sampling, testing and assessing the
MS EN 1008:2010
1199 suitability of water, including water recovered from processes in the concrete 25 RM 30.00
(CONFIRMED:2015)
industry, as mixing water for concrete (Second revision)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1204 MS 1017:2012 Aluminium framed sliding glass doors - Specification (First revision) 39 RM 60.00
Thermal insulation products for buildings - Factory made mineral wool (MW)
1205 MS 1020:2010, AMD. 2:2015 FREE 4 RM -
products - Specification (First revision) AMENDMENT 2
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL
1206 MS 1020:2010 22 RM 30.00
WOOL (MW) PRODUCTS - SPECIFICATION (FIRST REVISION)
Thermal insulation products for buildings - Factory made mineral wool (MW)
1207 MS 1020:2010, AMD. 1:2014 FREE 2 RM -
products - Specification (First revision) AMENDMENT 1
SPECIFICATION FOR IDENTIFICATION OF THE CONTENTS OF INDUSTRIAL GAS
1208 MS 1023:1999 12 RM 15.00
CONTAINERS (FIRST REVISION)
SPECIFICATION FOR IDENTIFICATION OF THE CONTENTS OF INDUSTRIAL GAS
1209 MS 1023:1999, AMD. 1:2011 FREE 1 RM -
CONTAINERS (FIRST REVISION)
1210 MS 1024:1986 SPECIFICATION FOR WHEEL NUTS FOR PASSENGER VEHICLES 15 RM 15.00
WHEEL RIMS FOR MOTORCYCLE AND ASSEMBLY - SPECIFICATION (FIRST
1211 MS 1025:2008 17 RM 30.00
REVISION)
METHOD FOR ANALYSIS FOR DRIED MILK AND DRIED MILK PRODUCTS -
1212 MS 1026:1986 18 RM 30.00
DETERMINATION OF INSOLUBILITY INDEX
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1221 MS 1033:1986 SPECIFICATION FOR PLASTICS CONTAINERS FOR DAIRY PRODUCTS 13 RM 15.00
Unplasticised polyvinyl chloride (PVC-U) conduit for underground
1222 MS 1034:2013 15 RM 15.00
telecommunication cables - Specification (First revision)
CODE OF PRACTICE FOR UNPLASTICIZED PVC PIPEWORK FOR THE CONVEYANCE
1223 MS 1035:1986 30 RM 45.00
OF LIQUID UNDER PRESSURE
1224 MS 1036:2006 WOOD BASED PANELS – PARTICLEBOARDS – SPECIFICATION (FIRST REVISION) 29 RM 45.00
1228 MS 1041:2001 (CONFIRMED:2012) Specification for fresh pineapple (First revision) 11 RM 15.00
CODE OF PRACTICE FOR SAFETY IN LABORATORIES PART 4 : IONIZING
1229 MS 1042: PART 4:1992 57 RM 90.00
RADIATIONS
SAFETY IN LABORATORIES - CODE OF PRACTICE - PART 1: GENERAL (FIRST
1230 MS 1042: PART 1:2007 52 RM 75.00
REVISION)
SAFETY IN LABORATORIES - CODE OF PRACTICE - PART 2: CHEMICAL ASPECTS
1231 MS 1042-2:2009 71 RM 105.00
(FIRST REVISION)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1232 MS 1042-7:2011 SAFETY IN LABORATORIES - CODE OF PRACTICE - PART 7: FUME CUPBOARDS 80 RM 120.00
Safety in laboratories - Code of practice - Part 3: Biosafety and biocontainment
1233 MS 1042-3:2015 171 RM 255.00
in microbiology laboratories (First revision)
Safety in laboratories - Code of practice - Part 6: Plant and equipmment aspect
1234 MS 1042-6:2015 44 RM 60.00
(First revision)
1235 MS 1042-9:2015 Safety in laboratories - Code of practice - Part 9: Storage of chemicals 37 RM 60.00
METHOD FOR THE QUANTITATIVE ANALYSIS OF PRESERVATIVE SOLUTIONS AND
1236 MS 1043 : 1986 TREATED TIMBER CONTAINING PENTACHLOROPHENOL AND 14 RM 15.00
PENTACHLOROPHENOL LAURATE
PLASTICS – SYMBOLS AND ABBREVIATED TERMS – PART 3: PLASTICIZERS (FIRST
1237 MS ISO 1043-3:2004 11 RM 15.00
REVISION) (ISO 1043-3:1996, IDT)
PLASTICS – SYMBOLS AND ABBREVIATED TERMS – PART 4: FLAME RETARDANTS
1238 MS ISO 1043-4:2004 11 RM 15.00
(ISO 1043-4:1998, IDT)
Household insecticide products - Mosquito vapourising mat - Specification
1239 MS 1044:2012 19 RM 30.00
(Second revision)
METHODS OF MEASURING DRYING SHRINKAGE OF MORTAR CONTAINING
1240 MS 1045 : 1986 18 RM 30.00
HYDRAULIC CEMENT
SPECIFICATION FOR MEDICAL GAS CYLINDERS, VALVES AND YOKE
1241 MS 1047 : 1986 38 RM 60.00
CONNECTIONS
CODE OF PRACTICE FOR THE TRANSPORTATION OF DANGEROUS GOODS BY
1242 MS 1048:1986 8 RM 15.00
SHIPS
1243 MS 1050:2010 ROAD VEHICLES - ASPHALT DAMPING SHEETS - SPECIFICATION (FIRST REVISION) 24 RM 30.00
SPECIFICATION FOR HOSPITAL BEDSIDE LOCKERS PART 1 : GENERAL PURPOSE
1244 MS 1051 : PART 1 : 1987 13 RM 15.00
HOSPITAL BEDSIDE LOCKERS OF WOODEN CONSTRUCTION
1245 MS 1052 : 1986 SPECIFICATION FOR SYMBOLIC REPRESENTATION OF WELDS ON DRAWINGS 30 RM 45.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1246 MS 1053:1986, AMD. 1:1993 SPECIFICATION FOR EVAPORATED FILLED MILK FREE 1 RM -
1248 MS 1054:1986, AMD. 1:1991 SPECIFICATION FOR CONDENSED FILLED MILK FREE 1 RM -
1249 MS 1054:1986, AMD. 2:1993 SPECIFICATION FOR CONDENSED FILLED MILK FREE 1 RM -
1252 MS 1055:2016 Fresh jackfruit (Artocarpus heterophyllus Lam.) - Specification (Second revision) 14 RM 15.00
MS 1056-3:2005 Soils for civil engineering purposes - Test method - Part 3: Chemical and electro
1253 83 RM 120.00
(CONFIRMED:2013) - Chemical tests
MS 1056-2:2005
1254 Soils for civil engineering purposes - Test method - Part 2: Classification tests 118 RM 165.00
(CONFIRMED:2013)
MS 1056-6:2005 Soils for civil engineering purposes - Test method - Part 6: Consolidation and
1255 109 RM 165.00
(CONFIRMED:2013) permeability tests in hydraulic cells and with pore pressure measurement
MS 1056-4:2005 Soils for civil engineering purposes - Test method - Part 4: Compaction-related
1256 89 RM 135.00
(CONFIRMED:2013) tests
MS 1056-7:2005 Soils for civil engineering purposes - Test method - Part 7: Shear strength tests
1257 80 RM 120.00
(CONFIRMED:2013) (Total stress)
SOILS FOR CIVIL ENGINEERING PURPOSES - TEST METHOD - PART 9: IN-SITU
1258 MS 1056: PART 9:2005 116 RM 165.00
TESTS
MS 1056-1:2005 Soils for civil engineering purposes - Test method - Part 1: General
1259 60 RM 90.00
(CONFIRMED:2013) requirements and sample preparation (First revision)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS 1056-8:2005 Soils for civil engineering purposes - Test method - Part 8: Shear strength tests
1260 56 RM 90.00
(CONFIRMED:2013) (Effective stress)
MS 1056-5:2005 Soils for civil engineering purposes - Test method - Part 5: Compressibility,
1261 60 RM 90.00
(CONFIRMED:2013) permeability and durability tests
1262 MS 1057 : 1995 SPECIFICATION FOR ADJUSTABLE LOUVRE WINDOWS (FIRST REVISION) 24 RM 30.00
MS 1058: PART 1:2005, AMD. POLYETHYLENE (PE) PIPING SYSTEMS FOR WATER SUPPLY – PART 1: GENERAL
1263 FREE 2 RM -
1:2011 (FOURTH REVISION)
MS 1058: PART 2:2005, AMD. POLYETHYLENE (PE) PIPING SYSTEMS FOR WATER SUPPLY – PART 2: PIPES
1264 FREE 2 RM -
1:2011 (FOURTH REVISION)
POLYETHYLENE (PE) PIPING SYSTEMS FOR WATER SUPPLY - PART 2: PIPES
1265 MS 1058: PART 2:2005 21 RM 30.00
(FOURTH REVISION)
1266 MS 1058: PART 3:2006 POLYETHYLENE (PE) PIPING SYSTEMS FOR WATER SUPPLY – PART 3: FITTINGS 31 RM 45.00
POLYETHYLENE (PE) PIPING SYSTEMS FOR WATER SUPPLY – PART 5: GUIDANCE
1267 MS 1058: PART 5:2006 22 RM 30.00
FOR THE ASSESSMENT OF CONFORMITY
POLYETHYLENE (PE) PIPING SYSTEMS FOR WATER SUPPLY – PART 4: FITNESS
1268 MS 1058: PART 4:2006 14 RM 15.00
FOR PURPOSE OF THE SYSTEM
POLYETHYLENE (PE) PIPING SYSTEMS FOR WATER SUPPLY – PART 1: GENERAL
1269 MS 1058: PART 1:2005 20 RM 30.00
(FOURTH REVISION)
1270 MS 1060 : 1986 SPECIFICATION FOR MORTICE LOCKS FOR USE IN BUILDINGS 19 RM 30.00
MS 1061: PART 1:1999 VITRIFIED CLAY PIPES AND FITTINGS AND PIPE JOINTS FOR DRAINS AND
1271 21 RM 30.00
(CONFIRMED:2008) SEWERS : PART 1 : REQUIREMENTS (FIRST REVISION)
MS 1061: PART 2:1999 VITRIFIED CLAY PIPES AND FITTINGS AND PIPE JOINTS FOR DRAINS AND
1272 25 RM 30.00
(CONFIRMED:2008) SEWERS : PART 2 : QUALITY CONTROL AND SAMPLING (FIRST REVISION)
MS 1061: PART 3:1999 VITRIFIED CLAY PIPES AND FITTINGS AND PIPE JOINTS FOR DRAINS AND
1273 44 RM 60.00
(CONFIRMED:2008) SEWERS : PART 3 : TEST METHODS (FIRST REVISION)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1274 MS 1062 : 1986 SPECIFICATION FOR BORED LOCKS AND LATCHES FOR BUILDINGS 16 RM 30.00
PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH
TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED
1275 MS 1063:2002, AMD. 1:2010 FREE 2 RM -
POLY(VINYL CHLORIDE )(PVC-U) - SPECIFICATION FOR PIPES, FITTINGS AND THE
SYSTEM (FIRST REVISION)
PLASTICS PIPING SYSTEMS FOR SOIL, VENTILATION AND WASTE DISCHARGE
(LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE –
1276 MS 1063 : 2002 51 RM 75.00
UNPLASTICISED POLY(VINYL CHLORIDE) (PVC-U) – SPECIFICATIONS FOR PIPES,
FITTINGS AND THE SYSTEM (FIRST REVISION)
MS 1064: PART 6:2001 GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 6: COORDINATING
1277 14 RM 15.00
(CONFIRMED:2009) SIZED AND PREFERRED SIZES FOR RIGID FLAT SHEETS (FIRST REVISION)
MS 1064: PART 5:2001 GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 5 : COORDINATING
1278 12 RM 15.00
(CONFIRMED:2009) SIZES AND PREFERRED SIZES FOR WINDOWSETS
MS 1064: PART 4:2001 GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 4: COORDINATING
1279 12 RM 15.00
(CONFIRMED:2009) SIZES AND PREFERRED SIZES FOR DOORSETS (FIRST REVISION)
MS 1064: PART 2:2001 GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 2: STOREY HEIGHTS
1280 11 RM 15.00
(CONFIRMED:2009) AND ROOM HEIGHTS (FIRST REVISION)
GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 3: COORDINATING
MS 1064: PART 3:2003
1281 SIZES AND PREFERRED SIZES FOR STAIRS AND STAIR OPENINGS (FIRST 16 RM 30.00
(CONFIRMED:2009)
REVISION)
MS 1064: PART 10:2001 GUIDE TO MODULAR COORDINATION IN BUILDINGS: PART 10: COORDINATING
1282 16 RM 30.00
(CONFIRMED:2009) SIZES AND PREFERRED SIZES FOR REINFORCED CONCRETE COMPONENTS
Guide to modular coordination in buildings - Part 10: Coordinating sizes and
1283 MS 1064-10:2018 18 RM 30.00
preferred sizes for reinforced concrete components (First revision)
MS 1064: PART 9:2001 GUIDE TO MODULAR COORDINATION IN BUILDINGS : PART 9: COORDINATING
1284 25 RM 45.00
(CONFIRMED:2009) SIZES AND PREFERRED SIZES FOR CABINETS
MS 1064: PART 7:2001 GUIDE TO MODULAR COORDINATION IN BUILDINGS: PART 7: COORDINATING
1285 16 RM 30.00
(CONFIRMED:2009) SIZES AND PREFERRED SIZES FOR TILES
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1293 MS 1068 : 2002 SPECIFICATION FOR RUBBER FLOOR MATS FOR VEHICLES (FIRST REVISION) 12 RM 15.00
1294 MS 1069:1987 SPECIFICATION FOR PORTABLE ALUMINIUM SINGLE AND EXTENSION LADDERS 20 RM 30.00
SPECIFICATION FOR RUBBER RADIATOR HOSES FOR AUTOMOTIVE INTERNAL
1295 MS 1070 : 2002 21 RM 30.00
COMBUSTION ENGINE (FIRST REVISION)
SPECIFICATION FOR FIRE RESISTANCE DOORSETS : PART 3: METHODS FOR
1296 MS 1073: PART 3:1996 30 RM 45.00
DETERMINATION OF THE FIRE RESISTANCE - TYPE OF DOORSETS
MS 1073-2:1996 Specification for fire resistant doorsets - Part 2: Methods for determination of
1297 54 RM 75.00
(CONFIRMED:2015) the fire resistance - General principles
MS 1073: PART 3:1996, SPECIFICATION FOR FIRE RESISTANCE DOORSETS PART 3 : METHODS FOR
1298 FREE 1 RM -
AMD.1:2003 DETERMINATION OF THE FIRE RESISTANCE - TYPE OF DOORSETS
MS ISO 1073-2:1993 Alphanumeric character sets for optical recognition - Part 2: Character set OCR-
1299 61 RM 90.00
(CONFIRMED:2015) B - Shapes and dimensions of the printed image
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1300 MS 1075:1987 (CONFIRMED:2012) Export specification for fresh ‘mas’ bananas 11 RM 15.00
1301 MS 1075:1987, AMD. 1:1989 EXPORT SPECIFICATION FOR FRESH 'MAS' BANANAS FREE 2 RM -
1303 MS 1077-3:2012 Brake fluids - Test method - Part 3: pH value (Second revision) 11 RM 15.00
METHOD OF TEST FOR BRAKE FLUIDS: PART 6: FLUIDITY AND APPEARANCE AT
1304 MS 1077: PART 6:2003 9 RM 15.00
LOW TEMPERATURE (FIRST REVISION)
Brake fluids - Test method - Part 2: Wet equilibrium reflux boiling point (Wet
1305 MS 1077-2:2012 12 RM 15.00
ERBP) (Second revision)
1306 MS 1077-10:2012 Brake fluids - Test method - Part 10: Resistance to oxidation (First revision) 18 RM 30.00
1307 MS 1077-9:2012 Brake fluids - Test method - Part 9: Compatibility (Second revision) 14 RM 15.00
Brake fluids - Test method - Part 6: Fluidity and appearance at low temperature
1308 MS 1077-6:2012 9 RM 15.00
(Second revision)
1309 MS 1077-8:2012 Brake fluids - Test method - Part 8: Water tolerance (Second revision) 13 RM 15.00
Brake fluids - Test method - Part 1: Equilibrium reflux boiling point (ERBP)
1310 MS 1077-1:2012 12 RM 15.00
(Second revision)
1311 MS 1077-12:2012 Brake fluids - Test method - Part 12: Stroking properties (First revision) 20 RM 30.00
1312 MS 1077-4:2012 Brake fluids - Test method - Part 4: Fluid stability (Second revision) 13 RM 15.00
1313 MS 1077-5:2012 Brake fluids - Test method - Part 5: Corrosion (Second revision) 20 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1314 MS 1077-11:2012 Brake fluids - Test method - Part 11: Effects on SAE SBR WC cups (First revision) 12 RM 15.00
1315 MS 1078 : 1987 METHODS OF TEST FOR BOILING POINT OF ENGINE COOLANTS / ANTIFREEZES 8 RM 15.00
METHOD OF TEST FOR DETERMINATION OF TOTAL ANIONIC DETERGENT BY
1316 MS 1079 : 1987 15 RM 15.00
HYAMINE TITRATION
METHOD OF TEST FOR DETERMINATION OF TOTAL NON-IONIC DETERGENT BY
1317 MS 1080:1987 (CONFIRMED:2003) 12 RM 15.00
BATCH TECHNIQUE
METHOD OF TEST FOR DETERMINATION OF CATIONIC ACTIVE MATTER IN
1318 MS 1081 : 1987 14 RM 15.00
DETERGENTS - BY DIRECT TWO PHASE TITRATION PROCEDURE
BELT DRIVES - V-BELTS AND V-RIBBED BELTS, AND CORRESPONDING GROOVED
1319 MS ISO 1081:2008 20 RM 30.00
PULLEYS - VOCABULARY (ISO 1081:1995, IDT)
1320 MS 1082:2011 Elastomeric teats for feeding bottles - Specification (Second revision) 15 RM 15.00
1321 MS 1083:1987 SPECIFICATION FOR ULTRA HIGH TEMPERATURE (UHT) FLAVOURED MILK 31 RM 45.00
CODE OF PRACTICE FOR THE INSTALLATION OF BURIED UNPLASTICISED PVC
1322 MS 1085:1987 26 RM 45.00
PIPEWORK FOR GRAVITY SEWERS
POLYETHYLENE (PE) PIPING SYSTEMS FOR GASEOUS FUELS SUPPLY – PART 1:
1323 MS 1086: PART 1:2007 19 RM 30.00
GENERAL (FIRST REVISION)
POLYETHYLENE (PE) PIPING SYSTEMS FOR GASEOUS SUPPLY - PART 5: FITNESS
1324 MS 1086: PART 5:2008 13 RM 15.00
FOR PURPOSE OF THE SYSTEM
POLYETHYLENE (PE) PIPING SYSTEMS FOR GASEOUS SUPPLY - PART 6:
1325 MS 1086: PART 6:2008 25 RM 30.00
GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
POLYETHYLENE (PE) PIPING SYSTEMS FOR GASEOUS FUELS SUPPLY – PART 2:
1326 MS 1086: PART 2:2007 21 RM 30.00
PIPES (FIRST REVISION)
POLYETHYLENE (PE) PIPING SYSTEMS FOR GASEOUS FUELS SUPPLY - PART 3:
1327 MS 1086: PART 3:2008 27 RM 45.00
FITTINGS
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1341 MS 1102:2003 SPECIFICATION FOR BLACK AND WHITE PEPPER, GROUND (FIRST REVISION) 10 RM 15.00
1342 MS 1103 : 1988 METHOD FOR DETERMINATION OF WATER USING KARL FISCHER REAGENT 18 RM 30.00
SPECIFICATION FOR PAINTER'S AND DECORATOR'S BRUSHES (NATURAL
1343 MS 1104 : 1988 22 RM 30.00
BRISTLES)
TEST METHODS FOR IMPACT RESISTANCE OF PLASTICS FILM BY THE FREE-
1344 MS 1105:2006 19 RM 30.00
FALLING DART METHOD (FIRST REVISION)
1346 MS 1107:1988 SPECIFICATION FOR STEEL DISC WHEELS FOR MOTOR VEHICLES 37 RM 60.00
1347 MS 1108:1988 SPECIFICATION FOR SUSPENSION COIL SPRINGS FOR AUTOMOTIVE USE 14 RM 15.00
SPECIFICATION FOR DIRECT CURRENT OPERATED SOUND SIGNALLING DEVICES
1348 MS 1109:1988 14 RM 15.00
(HORNS) FOR MOTOR VEHICLES
STANDARD ON MICROBIOLOGICAL EXAMINATION OF MEAT AND MEAT
1349 MS 1110: PART 4:1989 17 RM 30.00
PRODUCTS PART 4 : DETECTION AND ENUMERATION OF Staphylococcus Aureus
STANDARD ON MICROBIOLOGICAL EXAMINATION OF MEAT AND MEAT
1350 MS 1110: PART 2:1989 PRODUCTS PART 2 : DETECTION AND ENUMERATION OF COLIFORMS AND 17 RM 30.00
Escherichia coli
MICROBIOLOGICAL EXAMINATION OF MEAT AND MEAT PRODUCTS PART 1 :
1351 MS 1110: PART 1:1988 28 RM 45.00
DETECTION OF Salmonellae
STANDARD ON MICROBIOLOGICAL EXAMINATION OF MEAT AND MEAT
1352 MS 1110: PART 3:1989 14 RM 15.00
PRODUCTS PART 3 : ENUMERATION OF MESOPHILIC AEROBIC PLATE COUNT
SPECIFICATION FOR RAW UNPROCESSED IN-SHELL GROUNDNUTS TO BE
1353 MS 1111:1988 12 RM 15.00
PROCESSED INTO MENGLEMBU GROUNDNUTS
1354 MS 1112:2011 INSTANT BEEHOON (RICE VERMICELLI) - SPECIFICATION (FIRST REVISION) 15 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1365 MS 1116 : 2001 SPECIFICATION FOR SODIUM CHLORIDE FOR INDUSTRIAL USE (FIRST REVISION) 21 RM 30.00
1368 MS 1120:2004 (CONFIRMED:2012) Sauce - sampling and test methods (First revision) 53 RM 75.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1371 MS 1124:2012 (BM) Cili manis segar - Spesifikasi (Semakan kedua) 19 RM 30.00
1378 MS 1127:2017 Fresh starfruit (Averrhoa carambola L.) - Specification (Third revision) 14 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1385 MS 1135:2009 FLOAT AND POLISHED PLATE GLASSES - SPECIFICATION (FIRST REVISION) 24 RM 30.00
1386 MS 1137:2009 LOW CARBON STEEL WIRES - SPECIFICATION (FIRST REVISION) 18 RM 30.00
MS 1138-4:2007
1387 Prestressing steel - Part 4: Strand (First revision) 13 RM 15.00
(CONFIRMED:2013)
MS 1138-1:2007
1388 Prestressing steel - Part 1: General requirements 18 RM 30.00
(CONFIRMED:2013)
MS 1138-3:2007
1389 Prestressing steel - Part 3: Steel bars (Quenched and tempered) 19 RM 30.00
(CONFIRMED:2013)
MS 1138-2:2007
1390 Prestressing steel - Part 2: Cold-drawn wire 15 RM 15.00
(CONFIRMED:2013)
PORTABLE CABLE REELS FOR DOMESTIC AND SIMILAR PURPOSES -
1391 MS 1141:2006 47 RM 75.00
SPECIFICATION (FIRST REVISION)
SPECIFICATION FOR HARD-DRAWN COPPER AND COPPER-CADMIUM
1392 MS 1142 : 1989 18 RM 30.00
CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES
Metallic materials - Rotating bar bending fatigue testing (First revision) (ISO
1393 MS ISO 1143:2015 34 RM 45.00
1143:2010, IDT)
SPECIFICATION FOR ALUMINIUM ALLOY STRANDED CONDUCTOR FOR
1394 MS 1143:1989 16 RM 30.00
OVERHEAD POWER TRANSMISSION
Secure storage units - Requirements, classification and methods of test for
1395 MS EN 1143-1:2014 resistance bulgary - Part 1: Safes, ATM safes, strongroom doors and 55 RM 75.00
strongrooms (First revision)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1397 MS 1144 : 1998 GENERAL REQUIREMENTS FOR ELECTRICAL ACCESSORIES (FIRST REVISION) 36 RM 60.00
1398 MS 1145:2003 (CONFIRMED:2012) Specification for fresh eksotika papaya (First revision) 11 RM 15.00
1406 MS 1154:2003 (CONFIRMED:2016) Specification for webbing for car seat belts (First revision) 22 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1425 MS 1168:2005 METHOD FOR DIP TEST FOR MOTOR VEHICLE PARTS (FIRST REVISION) 11 RM 15.00
METHODS OF TEST AND GENERAL REQUIREMENTS FOR STARTER MOTORS FOR
1426 MS 1169:1989 16 RM 30.00
MOTOR VEHICLES
SPECIFICATION FOR DOUBLE-DECK FLAT WOODEN PALLETS FOR THROUGH
1427 MS 1170 : 2000 9 RM 15.00
TRANSIT OF GOODS (FIRST REVISION)
LARGE WOODEN PALLETS - PRINCIPAL DIMENSIONS AND TOLERANCES
1428 MS 1174:2010 9 RM 15.00
(SECOND REVISION)
SPECIFICATION FOR LARGE WOODEN PALLETS FOR THROUGH TRANSIT OF
1429 MS 1174 : 2000 9 RM 15.00
GOODS (FIRST REVISION)
1430 MS 1175:2003 (CONFIRMED:2016) Specification for seat belts for motor vehicles (Second revision) 63 RM 90.00
MS 1176-8:1991 Specification for components of automatic fire detection systems - Part 8:
1431 33 RM 45.00
(CONFIRMED:2015) Specification for high temperature heat detectors
MS 1176-9:1993 Specification for components of automatic fire detection systems - Part 9:
1432 26 RM 45.00
(CONFIRMED:2015) Methods of test of sensitivity to fire
RECHARGING FIRE EXTINGUISHERS PART 1 : SPECIFICATION FOR PROCEDURE
1433 MS 1181: PART 1:1990 13 RM 15.00
AND MATERIALS
RECHARGING FIRE EXTINGUISHERS PART 2 : SPECIFICATION FOR POWDER
1434 MS 1181: PART 2:1990 14 RM 15.00
REFILL CHARGES
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1451 MS 1194:1991 METHODS FOR DETERMINATION OF CRUDE PROTEIN IN FOODS AND FEEDS 17 RM 30.00
CODE OF PRACTICE FOR STRUCTURAL USE OF CONCRETE PART 2 : SPECIAL
1452 MS 1195 : PART 2 : 1991 72 RM 105.00
CIRCUMSTANCES
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1456 MS 1203:2009, AMD. 1:2009 BRUSH CUTTERS - SPECIFICATION - SAFETY REQUIREMENTS (FIRST REVISION) FREE 1 RM -
1457 MS 1203:2009 (CONFIRMED:2015) Brush cutters - Specification - Safety requirements (First revision) 36 RM 60.00
Compressed natural gas (CNG) refuelling stations - Code of practice (Second
1458 MS 1204:2013 56 RM 90.00
revision)
METHOD FOR THE DETERMINATION OF THE EFFECTIVENESS OF WATER-
1459 MS 1205:1991 13 RM 15.00
REPELLENT SOLUTIONS
SPECIFICATION FOR QUALIFICATION FOR WELDERS – FUSION WELDING PART 1 :
1460 MS 1206 : Part 1 : 1991 31 RM 45.00
STEELS
PRECURED TREAD FOR RETREADING TYRES - SPECIFICATION (SECOND
1461 MS 1208:2010 12 RM 15.00
REVISION)
RIGID CELLULAR PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES - PART
1462 MS ISO 1209-2:2006 2: DETERMINATION OF FLEXURAL STRENGTH AND APPARENT FLEXURAL 15 RM 15.00
MODULUS OF ELASTICITY (FIRST REVISION) (ISO 1209-2:2004, IDT)
RIGID CELLULAR PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES - PART
1463 MS ISO 1209-1:2006 14 RM 15.00
1: BASIC BENDING TEST (FIRST REVISION) (ISO 1209-1:2004, IDT)
MS 1210-5:1991 Specification for fire hydrant systems equipment - Part 5: Boxes for foam inlets
1464 14 RM 15.00
(CONFIRMED:2015) and dry riser inlets
MS 1210-4:1991 Specification for fire hydrant systems equipment - Part 4: Boxes for landing
1465 13 RM 15.00
(CONFIRMED:2015) valves for dry risers
MS 1210-3:1991 Specification for fire hydrant systems equipment - Part 3: Inlet breeching for
1466 15 RM 15.00
(CONFIRMED:2015) riser inlets
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS 1210-2:1991 Specification for fire hydrant systems equipment - Part 2: Landing valves for dry
1467 19 RM 30.00
(CONFIRMED:2015) risers
MS 1210-1:1991 Specification for fire hydrant systems equipment: Part 1: Landing valves for wet
1468 26 RM 45.00
(CONFIRMED:2015) risers
MS 1210: PART 1:1991, AMD. SPECIFICATION FOR FIRE HYDRANT SYSTEMS EQUIPMENT PART 1: LANDING
1469 FREE 3 RM -
1:1999 VALVES FOR WET RISERS
MS 1210: PART 2:1991, AMD. SPECIFICATION FOR FIRE HYDRANT SYSTEMS EQUIPMENT PART 2: LANDING
1470 FREE 2 RM -
1:1999 VALVES FOR DRY RISERS
MS 1210: PART 3:1991, AMD. SPECIFICATION FOR FIRE HYDRANT SYSTEMS EQUIPMENT PART 3: INLET
1471 FREE 1 RM -
1:1999 BREECHING FOR RISER INLETS
Methods of test for finishes on wooden furniture - Part 1: Assessment of glare
1472 MS 1215-1:2012 17 RM 30.00
by measurement of specular gloss (First revision)
Methods of test for finishes on wooden furniture - Part 2: Assessment of
1473 MS 1215-2:2012 15 RM 15.00
surface resistance to wet heat (First revision)
Methods of test for finishes for wooden furniture - Part 4: Assessment of
1474 MS 1215-4:2012 15 RM 15.00
surface resistance to cold liquids (First revision)
Methods of test for finishes for wooden furniture - Part 5: Assessment of
1475 MS 1215-5:2012 15 RM 15.00
surface resistance to cold oils and fats (First revision)
Methods of test for finishes for wooden furniture - Part 6: Assessment of
1476 MS 1215-6:2012 18 RM 30.00
surface resistance to mechanical damage (First revision)
Methods of test for finishes for wooden furniture - Part 3: Assessment of
1477 MS 1215-3:2012 15 RM 15.00
surface resistance to dry heat (First revision)
1478 MS 1216:2003 SPECIFICATION FOR RETROREFLECTIVE SIGN FACE MATERIALS (FIRST REVISION) 15 RM 15.00
1479 MS 1217:1991 (CONFIRMED:2009) SPECIFICATION FOR FLASHER UNITS FOR MOTOR VEHICLES 20 RM 30.00
PERFORMANCE AND CONSTRUCTION OF ELECTRIC CIRCULATING FANS AND
1480 MS 1220:2001 21 RM 30.00
REGULATORS (FIRST REVISION) (IEC 60879:1986, MOD)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1486 MS 1228 : 1991 CODE OF PRACTICE FOR DESIGN AND INSTALLATION OF SEWERAGE SYSTEMS 84 RM 120.00
1487 MS 1229:2008 (E) FRESH SWEET CORN - SPECIFICATION (FIRST REVISION) 15 RM 15.00
1488 MS 1229:2008 (M) JAGUNG MANIS SEGAR - SPESIFIKASI (ULANGKAJI PERTAMA) 15 RM 15.00
1489 MS 1230:2010 (CONFIRMED:2015) Fresh lady's finger (okra) - Specification (First revision) 17 RM 30.00
1491 MS 1231:1991 METHODS OF SAMPLING FOR PALM OIL AND PALM OIL PRODUCTS 26 RM 45.00
Sampling of Palm Oil and Palm Oil Products - 1: Sampling from packages (First
1492 MS 1231-1:2012 22 RM 30.00
revision)
1493 MS 1231-2:2012 Sampling of Palm Oil and Palm Oil Products - 2: Sampling from bulk 30 RM 45.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1496 MS 1233 : 1991 SPECIFICATION FOR FRESH CUT ROSES (UNIFLORAL TYPE) 11 RM 15.00
1501 MS 1237:1991 (CONFIRMED:2008) SPECIFICATION FOR GENERAL PURPOSE GALVANIZED STEEL WIRE STRAND 16 RM 30.00
CONDUCTORS FOR OVERHEAD LINES - ZINC COATED STEEL WIRES (FIRST
1502 MS 1238:2009 20 RM 30.00
REVISION)
ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER
1503 MS 1239-1:2009 POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES 10 RM 15.00
(FIRST REVISION)
ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER
1504 MS 1239-2:2009 POWER CABLES OR TELECOMMUNICATION CABLES - PART 2: SUBMARINE 12 RM 15.00
CABLES (FIRST REVISION)
One-piece glass fibre reinforced polyester (GRP) water tanks - Nominal capacity
1505 MS 1241:2011 21 RM 30.00
of 100 000 litres and below - Specification (First revision)
Assessment of in-situ compressive strength in structures and precast concrete
1506 MS 1242:2014 components - Complementary guidance to that given in MS EN 13791 (First 39 RM 60.00
revision)
DESCRIPTION AND MARKING OF ARTICLES OF, OR CONTAINING PRECIOUS
1507 MS 1247:2005 13 RM 15.00
METAL - CODE OF PRACTICE (FIRST REVISION)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1511 MS 1252:2009 (E) FRESH FRENCH BEANS - SPECIFICATION (FIRST REVISION) 14 RM 15.00
1512 MS 1252:2009 (M) KACANG BUNCIS SEGAR – SPESIFIKASI (SEMAKAN PERTAMA) 14 RM 15.00
1520 MS 1259:1992, AMD. 1:1993 SPECIFICATION FOR ICING SUGAR (POWERED SUGAR) FREE 2 RM -
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1524 MS 1264:2005 (CONFIRMED:2012) DARK (THICK) SOY SAUCE - SPECIFICATION (FIRST REVISION) 11 RM 15.00
CODE OF GOOD IRRADIATION PRACTICE – PART 6: BANANAS, MANGOES AND
1525 MS 1265: PART 6:2005 14 RM 15.00
PAPAYAS FOR SHELF-LIFE EXTENSION (FIRST REVISION)
Code of good irradiation practice - Part 4: Cereal and their milled products for
1526 MS 1265-4:2018 11 RM 15.00
insect disinfestation and microbial control (Second revision)
Code of good irradiation practice - Part 3: Fresh fruits and vegetables for insect
1527 MS 1265-3:2018 15 RM 15.00
disinfestation (Second revision)
Code of good irradiation practice - Part 5: Dried fish and dried salted fish for
1528 MS 1265-5:2018 insect disinfestation, reduction of pathogenic microorganisms and control of 12 RM 15.00
moulds (Second revision)
1529 MS 1265-1:2018 Code of good irradiation practice - Part 1: General (Second revision) 19 RM 30.00
Code of good irradiation practice - Part 9: Spices, herbs and vegetable
1530 MS 1265-9:2018 seasonings for the control of pathogens, microflora and/or insect disinfestation. 11 RM 15.00
(Second revision)
Code of good irradiation practice - Part 6: Bananas, mangoes and papayas for
1531 MS 1265-6:2018 12 RM 15.00
shelf-life extension (Second revision)
Code of good irradiation practice - Part 10: Dried meat and dried salted meat of
1532 MS 1265-10:2018 animal origin for insect disinfestation, control of moulds and reduction of 12 RM 15.00
pathogenic microorganisms (First revision)
Code of good irradiation practice - Part 8: Prepackaged meats and poultry for
1533 MS 1265-8:2018 12 RM 15.00
the control of pathogens and/or shelf-life extension (Second revision)
PLASTICS - POLY(VINYL CHLORIDE) RESINS - DETERMINATION OF NUMBER OF
1534 MS ISO 1265:2007 18 RM 30.00
IMPURITIES AND FOREIGN PARTICLES (ISO 1265:2007, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1543 MS 1265: PART 1:2007 CODE OF GOOD IRRADIATION PRACTICE – PART 1: GENERAL (FIRST REVISION) 19 RM 30.00
Code of good irradiation practice - Part 7: Fish, shrimps and frog legs for the
1544 MS 1265-7:2018 control of microflora and pathogens and/or shelf-life extension (Second 12 RM 15.00
revision)
Code of good irradiation practice - Part 2: Bulb and tuber crops for sprout
1545 MS 1265-2:2018 12 RM 15.00
inhibition (Second revision)
FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART
MS ISO 1268-11:2005
1546 11: INJECTION MOULDING OF BMC AND OTHER LONG-FIBRE MOULDING 22 RM 30.00
(CONFIRMED:2011)
COMPOUNDS - SMALL PLATES (ISO 1268-11:2005, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 1268-5:2005 Fibre-reinforced plastics - methods of producing test plates - Part 5: Filament
1547 21 RM 30.00
(CONFIRMED:2012) winding (ISO 1268-5:2001, IDT)
MS ISO 1268-8:2005 FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART
1548 19 RM 30.00
(CONFIRMED:2011) 8: COMPRESSION MOULDING OF SMC AND BMC (ISO 1268-8:2004, IDT)
MS ISO 1268-9:2005 FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART
1549 14 RM 15.00
(CONFIRMED:2011) 9: MOULDING OF GMT/STC (ISO 1268-9:2003, IDT)
MS ISO 1268-3:2005 FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART
1550 16 RM 30.00
(CONFIRMED:2011) 3: WET COMPRESSION MOULDING (ISO 1268-3:2000, IDT)
FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART
MS ISO 1268-10:2005 10: INJECTION MOULDING OF BMC AND OTHER LONG-FIBRE MOULDING
1551 27 RM 45.00
(CONFIRMED:2011) COMPOUNDS - GENERAL PRINCIPLES AND MOULDING OF MULTIPURPOSE TEST
SPECIMENS (ISO 1268-10:2005, IDT)
MS ISO 1268-6:2005 FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART
1552 13 RM 15.00
(CONFIRMED:2011) 6: PULTRUSION MOULDING (ISO 1268-6:2002, IDT)
MS ISO 1268-2:2005 Fibre-reinforced plastics - methods of producing test plates - Part 2: Contact
1553 18 RM 30.00
(CONFIRMED:2012) and spray-up (ISO 1268-2:2001, IDT)
FIBRE-REINFORCED PLASTICS – METHODS OF PRODUCING TEST PLATES – PART
1554 MS ISO 1268-7:2005 15 RM 15.00
7: RESIN TRANSFER MOULDING (ISO 1268-7:2001, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Child use and care articles - Baby walking frames - Safety requirements and test
1560 MS EN 1273:2014 28 RM 45.00
methods
SPECIFICATION FOR PERFORMANCE REQUIREMENTS AND TESTS FOR OFFICE
1561 MS 1276 : PART 1 : 1992 22 RM 30.00
FURNITURE PART 1 : DESKS AND TABLES
GROUNDNUTS (PEANUTS) – CODE OF HYGIENIC PRACTICE FOR HANDLING AND
1562 MS 1279:2005 39 RM 60.00
PROCESSING (FIRST REVISION)
1563 MS 1280 : 1992 SPECIFICATION FOR FRESH ORCHID CUT FLOWERS (SPRAY TYPE) 12 RM 15.00
1565 MS 1281 : 1992 SPECIFICATION FOR FRESH CUT CARNATIONS (UNIFLORAL) 12 RM 15.00
1566 MS 1282: PART 4:1993 SPECIFICATION FOR FOOD ADDITIVES PART 4 : FLAVOUR ENHANCERS 14 RM 15.00
1567 MS 1282: PART 3:1993 SPECIFICATION FOR FOOD ADDITIVES PART 3 : ANTIOXIDANTS 16 RM 30.00
1568 MS 1282: PART 2:1992 SPECIFICATION FOR FOOD ADDITIVES PART 2 : PRESERVATIVES 18 RM 30.00
1569 MS 1282: PART 8:1995 SPECIFICATION FOR FOOD ADDITIVES PART 8 : COLOURING SUBSTANCE 24 RM 30.00
1570 MS 1282: PART 7:1994 SPECIFICATION FOR FOOD ADDITIVES PART 7 : ANTICAKING AGENTS 20 RM 30.00
1571 MS 1282: PART 6:1994 SPECIFICATION FOR FOOD ADDITIVES PART 6: SOLVENTS 16 RM 30.00
SPECIFICATION FOR FOOD ADDITIVES PART 5 : STABILIZERS, THICKENERS AND
1572 MS 1282: PART 5:1994 40 RM 60.00
GELLING AGENTS
1573 MS 1282: PART 1:1992 SPECIFICATION FOR FOOD ADDITIVES : PART 1 : ACID REGULATORS 27 RM 45.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1575 MS 1283:2005 (CONFIRMED:2012) OYSTER FLAVOURED SAUCE - SPECIFICATION (FIRST REVISION) 9 RM 15.00
1576 MS 1284:2008 SOFT, LIGHT AND DARK BROWN SUGAR - SPECIFICATION (FIRST REVISION) 10 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Wall and floor tiling - Part 1: Design and installation of ceramic, natural stone
1588 MS 1294-1:2012 and mosaic wall tiling in normal internal conditions - Code of practice (First 65 RM 90.00
revision)
Wall and floor tiling - Part 2: Design and installation of external ceramic and
1589 MS 1294-2:2013 60 RM 90.00
mosaic wall tiling in normal conditions - Code of practice (First revision)
Fibre-cement flat sheets - Product specification and test methods (First
1590 MS 1296:2010 (CONFIRMED:2015) 61 RM 90.00
revision)
1591 MS 1300 : 1993 SPECIFICATION FOR TRIBUTYLTIN NAPHTHENATE WOOD PRESERVATIVE 13 RM 15.00
SPECIFICATION FOR SINGLE PACKED POLYURETHANE MODIFIED ALKYD
1592 MS 1301 : 1993 20 RM 30.00
VARNISH FOR WOODEN FLOORS
SPECIFICATION FOR LIGHT ORGANIC SOLVENT PRESERVATIVE TREATMENT OF
1593 MS 1302 : 1993 24 RM 30.00
TIMBER
SPECIFICATION FOR THERMOPLASTIC ROAD MARKING MATERIALS : PART 1 :
1594 MS 1303 : PART 1 : 1993 34 RM 60.00
REQUIREMENTS
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1623 MS 1326 : PART 1 : 1993 SPECIFICATION FOR COCKROACH BAITS : PART 1 : LOOSE BAITS 14 RM 15.00
SPECIFICATION FOR COCKROACH BAIT STATION : PART 3 : METHOD FOR THE
1624 MS 1326 : PART 3 : 2002 11 RM 15.00
EVALUATION OF BIOLOGICAL EFFICACY OF COCKROACH BAIT STATION
HOUSEHOLD INSECTICIDE PRODUCTS – COCKROACH BAIT – EVALUATION
1625 MS 1326: PART 3:2007 11 RM 15.00
METHOD FOR BIOLOGICAL EFFICACY (SECOND REVISION)
HOUSEHOLD INSECTICIDE PRODUCTS - CONTAINERISED COCKROACH BAIT -
1626 MS 1326-2:2010 14 RM 15.00
SPECIFICATION (FIRST REVISION)
1628 MS 1328 : 1993 SPECIFICATION FOR TRIPLE SUPERPHOSPHATE, FERTILIZER GRADE 10 RM 15.00
1629 MS 1329 : 1993 SPECIFICATION FOR DIAMMONIUM PHOSPHATE, FERTILIZER GRADE 10 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1630 MS 1330 : 1993 SPECIFICATION FOR AMMONIUM CHLORIDE, FERTILIZER GRADE 10 RM 15.00
METHOD OF TEST FOR PLASTICS - POLYETHYLENE (PE) ETHYLENE COPOLYMER
1631 MS 1333 : PART 2 : 1993 THERMOPLASTICS PART 2: PREPARATION OF TEST SPECIMENS AND 15 RM 15.00
DETERMINATION OF PROPERTIES
METHOD OF TEST FOR PLASTICS -COMPRESSION MOULDING OF TEST
1632 MS 1336 : 1993 16 RM 30.00
SPECIMENS OF THERMOSETTING MATERIALS
PLASTICS - FILM AND SHEETING - DETERMINATION OF THICKNESS BY
1633 MS 1339:2010 10 RM 15.00
MECHANICAL SCANNING (FIRST REVISION) (ISO 4593:1993, MOD)
METHOD OF TEST FOR PLASTICS - DETERMINATION OF THE GAS TRANSMISSION
1634 MS 1344:1993 (CONFIRMED:2009) RATE OF FILMS AND THIN SHEETS UNDER ATMOSPHERIC PRESSURE - 16 RM 30.00
MANOMETRIC METHOD
1635 MS 1345 : 1993 METHOD OF TEST FOR PLASTICS - DETERMINATION OF TENSILE CREEP 16 RM 30.00
MS 1347-1:1994 CODE OF PRACTICE FOR CATHODIC PROTECTION : PART 1: CODE OF PRACTICE
1636 148 RM 210.00
(CONFIRMED:2015) FOR LAND AND MARINE APPLICATIONS
MS 1347 : PART 1:1994, AMD. CODE OF PRACTICE FOR CATHODIC PROTECTION : PART 1 : CODE OF PRACTICE
1637 FREE 1 RM -
:2001 FOR LAND AND MARINE APPLICATIONS
CUSHION GUM USED IN PRECURED RETREADING OF TYRES - SPECIFICATION
1638 MS 1348:2010 12 RM 15.00
(SECOND REVISION)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1644 MS 1353 : 1994 SPECIFICATION FOR FRESH CUT CARNATIONS (MULTI-FLORAL) 13 RM 15.00
1646 MS 1355 : 1994 SPECIFICATION FOR FRESH CUT ROSES (MULTI-FLORAL) 13 RM 15.00
1656 MS 1362:2016 Fresh spinach (Spinacia oleracea L.) - Specification (First revision) 14 RM 15.00
SPECIFICATION FOR DISODIUM TETRABORATE PENTAHYDRATE FERTILIZER
1657 MS 1363:1994 10 RM 15.00
GRADE
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1658 MS 1364 : 1994 METHOD FOR THE DETERMINATION OF BRIMFUL CAPACITY OF AEROSOL CANS 11 RM 15.00
METHOD OF TEST FOR DETERMINATION OF STANDARD OF FINENESS FOR
1659 MS 1365 : PART 2 : 2000 PRECIOUS METAL : PART 2 : SILVER AND ARTICLES OF SILVER BY TITRIMETRIC 10 RM 15.00
(POTENTIOMETRIC) METHOD
METHODS OF TEST FOR STANDARD OF FINENESS OF PRECIOUS METALS : PART
1660 MS 1365: PART 1:1994 12 RM 15.00
1: GOLD AND ARTICLES OF GOLD ALLOY BY CUPELLATION METHOD
1668 MS 1373:1995 SPECIFICATION FOR SERUNDING DAGING (SPICY SHREDDED MEAT) 18 RM 30.00
1669 MS 1374:1995 SPECIFICATION FOR FRESH, CHILLED AND FROZEN RABBIT MEAT 14 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1676 MS 1380 : 1995 SPECIFICATION FOR PRECAST CONCRETE PAVING BLOCKS 25 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1690 MS 1392:1998 (CONFIRMED:2013) Test method for the analysis of extractable proteins in natural rubber products 14 RM 15.00
TEST METHOD FOR THE ANALYSIS OF EXTRACTABLE PROTEINS IN NATURAL
1691 MS 1392:1998, AMD. 1:2001 FREE 1 RM -
RUBBER PRODUCTS
1692 MS 1393:1996 SPECIFICATION FOR FRESH CHINESE CABBAGE (HEAD TYPE) 12 RM 15.00
NEW PNEUMATIC TYRES FOR HIGHWAY VEHICLES OTHER THAN PASSENGER
1693 MS 1394:2008 54 RM 75.00
CARS – SPECIFICATION (FIRST REVISION)
New pneumatic tyres for highway vehicles other than passenger cars -
1694 MS 1394:2017 54 RM 75.00
Specification (Second revision)
1696 MS 1395:2011, AMD. 1:2015 Pillar fire hydrants - Specification (First revision) AMENDMENT 1 FREE 2 RM -
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Aluminium and aluminium alloys - Coil coated sheet and strip for general
1700 MS EN 1396:2012 (P) 34 RM 45.00
applications - Specification
1703 MS 1399:1996 SPECIFICATION FOR PRESSURE SENSITIVE ADHESIVE PAPER MASKING TAPES 18 RM 30.00
1704 MS 1399:1996, AMD. 1:2002 SPECIFICATION FOR PRESSURE SENSITIVE ADHESIVE PAPER MASKING TAPES FREE 1 RM -
SPECIFICATIONS FOR DRESSED TIMBER, DOOR JAMBS AND GENERAL
1705 MS 1401:1996 18 RM 30.00
MOULDINGS
CODE OF PRACTICE FOR SANITARY SYSTEM IN BUILDINGS - PART 4: OPERATION
1706 MS 1402: PART 4:2006 10 RM 15.00
AND MAINTENANCE (FIRST REVISION)
CODE OF PRACTICE FOR SANITARY SYSTEM IN BUILDINGS - PART 3: TESTING
1707 MS 1402: PART 3:2006 10 RM 15.00
AND COMMISSIONING (FIRST REVISION)
CODE OF PRACTICE FOR SANITARY SYSTEM IN BUILDINGS – PART 1: DESIGN
1708 MS 1402: PART 1:2006 80 RM 120.00
(FIRST REVISION)
CODE OF PRACTICE FOR SANITARY SYSTEM IN BUILDINGS - PART 2:
1709 MS 1402: PART 2:2006 16 RM 30.00
INSTALLATION (FIRST REVISION)
RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER
1710 MS ISO 1403:2007 14 RM 15.00
APPLICATIONS - SPECIFICATION (ISO 1403:2005, IDT)
1711 MS 1403:1996 (CONFIRMED:2003) ELECTRICITY GENERATING SETS - PORTABLE (UP TO 5 kW) 40 RM 60.00
1712 MS 1405:2008 CODING SYSTEM FOR PLASTICS PRODUCTS (FIRST REVISION) 10 RM 15.00
CODE OF PRACTICE FOR SYSTEM OF TOLERANCES FOR THE DIMENSION OF
1713 MS 1406:1996 (CONFIRMED:2009) 16 RM 30.00
PLASTICS MOULDING
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1718 MS 1408:1997 (P) SPECIFICATION FOR OIL PALM EMPTY FRUIT BUNCH FIBRE 16 RM 30.00
1719 MS 1409:1997 (CONFIRMED:2016) Specification for emergency triangular reflector for motor vehicles 26 RM 45.00
1722 MS 1412 : 1997 ANIMAL FEEDING STUFFS - DETERMINATION OF MOULD COUNT 8 RM 15.00
1723 MS 1413 : 1997 ANIMAL FEEDING STUFFS - DETERMINATION OF PROTEIN SOLUBILITY INDEX. 7 RM 15.00
1724 MS 1414 : 1997 ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FIBRE 9 RM 15.00
1725 MS 1415 : 1997 ANIMAL FEEDING STUFFS - DETERMINATION OF TEST WEIGHT PER BUSHEL 7 RM 15.00
1726 MS 1416 : 1997 ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FAT 7 RM 15.00
Glass-fibre reinforced plastics underground storage tanks for petroleum
1727 MS 1418:2011 22 RM 30.00
products, alcohols and alcohol gasoline mixtures - Specification (First revision)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1744 MS 1424:2009 TEST METHOD FOR PACKAGE YIELD OF PLASTICS FILM (FIRST REVISION) 12 RM 15.00
GLOSSARY OF TERMS FOR PACKAGING : PART 1 : GENERAL (INCLUDING
1745 MS 1425 : PART 1 : 1997 26 RM 45.00
AUXILIARY MATERIALS)
GLOSSARY OF TERMS FOR PACKAGING PART 2 : PLASTICS AND FLEXIBLE
1746 MS 1425 : PART 2 : 1997 14 RM 15.00
PACKAGING
1747 MS 1425 : PART 3 : 1997 GLOSSARY OF TERMS FOR PACKAGING PART 3 : PLASTICS SACKS 18 RM 30.00
RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL
1748 MS 1426:1997 OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S) 119 RM 165.00
PART 1 : GENERAL RULES
1749 MS 1430:2010 (CONFIRMED:2015) Steel library shelving - Specification (First revision) 19 RM 30.00
PAINTS AND VARNISHES : PREPARATION OF ACID EXTRACTS FROM PAINTS IN
1750 MS 1431 : 1998 18 RM 30.00
LIQUID OR POWDER FORM (ISO 6713 : 1984, IDT)
RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO OZONE CRACKING
1751 MS ISO 1431-1:2008 - PART 1: STATIC AND DYNAMIC STRAIN TESTING (FIRST REVISION) (ISO 1431- 22 RM 30.00
1:2004, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1764 MS 1440:2012 Plastics - Vocabulary (First revision) (ISO 472:1999, IDT) 235 RM 330.00
FLEXIBLE BARRIER MATERIALS - TEST METHOD OF TEST FOR SEAL STRENGTH
1765 MS 1441:2010 19 RM 30.00
(FIRST REVISION)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1770 MS 1446 : 1998 CODE OF PRACTICE FOR THE OPERATION OF TIMBER TREATMENT PLANTS 14 RM 15.00
1771 MS 1446:2014 Operation of timber treatment plants - Code of practice (First revision) 16 RM 30.00
FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 2: HOSE SYSTEMS WITH
1772 MS 1447: PART 2:2006 31 RM 45.00
LAY-FLAT HOSE
FIXED FIREFIGHTING SYSTEMS – HOSE SYSTEMS: PART 3: MAINTENANCE OF
1773 MS 1447: PART 3:2006 HOSE REELS WITH SEMI-RIGID HOSE AND HOSE SYSTEMS WITH LAY-FLAT HOSE 10 RM 15.00
(FIRST REVISION)
FIXED FIREFIGHTING SYSTEMS – HOSE SYSTEMS PART 1: HOSE REELS WITH
1774 MS 1447: PART 1:2006 34 RM 45.00
SEMI-RIGID HOSE
1775 MS 1448 : 1999 ANIMAL FEEDING STUFFS - DETERMINATION OF PARTICLE SIZE 28 RM 45.00
MS 1449-6:1999 Rubber - Determination of metal content by atomic absorption spectrometry -
1776 15 RM 15.00
(CONFIRMED:2013) Part 6: Determination of magnesium content
RUBBER - DETERMINATION OF METAL CONTENT BY ATOMIC ABSORPTION
1777 MS 1449: PART 3:1999 15 RM 15.00
SPECTROMETRY : PART 3 : DETERMINATION OF COPPER CONTENT
RUBBER - DETERMINATION OF METAL CONTENT BY ATOMIC ABSORPTION
1778 MS 1449: PART 4:1999 15 RM 15.00
SPECTROMETRY : PART 4 : DETERMINATION OF MANGANESE CONTENT
MS 1449-1:1999 Rubber - Determination of metal content by atomic absorption spectrometry -
1779 15 RM 15.00
(CONFIRMED:2013) Part 1: Determination of zinc content
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1787 MS 1458: PART 2:2001 SPECIFICATION FOR TABLE CUTLERY : PART 2: PERFORMANCE REQUIREMENTS 26 RM 45.00
1788 MS 1458: PART 1:1999 SPECIFICATION FOR TABLE CUTLERY : PART 1 : GENERAL 12 RM 15.00
Superior processing and processing aid rubber - Specification and
1789 MS 1459:2012 14 RM 15.00
determination of extrusion swell test (First revision)
CODE OF PRACTICE ON RESISTIBILITY OF TELECOMMUNICATION EQUIPMENT
1790 MS 1460:1999 39 RM 60.00
TO OVERVOLTAGES AND OVERCURRENTS
Metal scaffolding - Part 4: Temporary works equipment - Section 1: Scaffolds -
1791 MS 1462-4-1:2013 64 RM 90.00
Performance requirements and general design
MS 1462-3-1:2011 Metal scaffolding - Part 3: Prefabricated scaffolds - Section 1: Specification for
1792 29 RM 45.00
(CONFIRMED:2015) steel and aluminium modular system scaffolding
MS 1462-2-3:2011 Metal scaffolding - Part 2: Tubular (tube and coupler) scaffolds - Section 3:
1793 49 RM 75.00
(CONFIRMED:2015) Specification for steel and aluminium couplers, fitting and accessories
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1799 MS 1463:2008 GREY CAST IRONS - CLASSIFICATION (FIRST REVISION) (ISO 185:2005, MOD) 30 RM 45.00
Test method for DC resistance or conductance of insulating materials (First
1800 MS 1465:2012 33 RM 45.00
revision)
TEST METHOD FOR LINEAR THERMAL EXPANSION OF SOLID MATERIALS BY
1801 MS 1466:2007 11 RM 15.00
THERMOMECHANICAL ANALYSIS (FIRST REVISION)
METHOD OF TEST FOR DETERMINATION OF 2 % SECANT MODULUS FOR
1802 MS 1467:1999 (CONFIRMED:2010) 12 RM 15.00
POLYETHYLENE FILMS
1803 MS 1469:1999 SPECIFICATION FOR PLASTIC LENSES FOR AUTOMOTIVE LAMPS 14 RM 15.00
1804 MS 1470:2011 PVC floor mats for motor vehicles - Specification (First revision) 13 RM 15.00
MS 1471-8:1999 Vocabulary on fire protection: Part 8: Terms specific to fire fighting rescue
1805 36 RM 60.00
(CONFIRMED:2013) services and handling hazardous materials
MS 1471-2:1999
1806 Vocabulary on fire protection: Part 2: Structural fire protection 9 RM 15.00
(CONFIRMED:2013)
MS 1471-3:1999
1807 Vocabulary on fire protection: Part 3: Fire detection and alarm 11 RM 15.00
(CONFIRMED:2013)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS 1471-4:1999
1808 Vocabulary on fire protection: Part 4: Fire extinction equipment 20 RM 30.00
(CONFIRMED:2013)
MS 1471-5:1999
1809 Vocabulary on fire protection: Part 5: Smoke control 9 RM 15.00
(CONFIRMED:2013)
MS 1471-1:1999
1810 Vocabulary on fire protection: Part 1: General terms and phenomena of fire 12 RM 15.00
(CONFIRMED:2013)
MS 1471-7:1999 Vocabulary on fire protection: Part 7: Explosion detection and suppression
1811 8 RM 15.00
(CONFIRMED:2013) means
MS 1471-6:1999
1812 Vocabulary on fire protection: Part 6: Evacuation and means of escape 11 RM 15.00
(CONFIRMED:2013)
Fire precautions in the design of buildings - Smoke control in protected escape
1813 MS 1472:2017 65 RM 90.00
routes using pressurization - Code of practice (First revision)
CODE OF PRACTICE FOR FIRE PRECAUTIONS IN THE DESIGN OF BUILDINGS –
1814 MS 1472:1999 64 RM 90.00
SMOKE CONTROL IN PROTECTED ESCAPE ROUTES USING PRESSURIZATION
TEST METHOD FOR PLASTICS : DYNAMIC MECHANICAL PROPERTIES : IN
1815 MS 1473:2007 12 RM 15.00
FLEXURE (THREE-POINT BENDING) (FIRST REVISION)
Method of test for determining the carbon dioxide loss of plastics beverage
1816 MS 1476:1999 (CONFIRMED:2012) 20 RM 30.00
containers
PLASTICS - POLYETHYLENE FILM AND SHEETING - SPECIFICATION (FIRST
1817 MS 1477:2008 14 RM 15.00
REVISION)
PLASTICS - LOW-DENSITY POLYETHYLENE FILMS FOR GENERAL USE AND
1818 MS 1478:2008 17 RM 30.00
PACKAGING APPLICATIONS - SPECIFICATION (FIRST REVISION)
1819 MS ISO 1479:2013 Hexagon head tapping screws (ISO 1479:2011, IDT) 13 RM 15.00
SPECIFICATION FOR POLYETHYLENE SHEETING FOR CONSTRUCTION,
1820 MS 1479:1999 (CONFIRMED:2008) 13 RM 15.00
INDUSTRIAL AND AGRICULTURAL APPLICATION
FOOD SAFETY ACCORDING TO HAZARD ANALYSIS AND CRITICAL CONTROL
1821 MS 1480:2007 31 RM 45.00
POINT (HACCP) SYSTEM (FIRST REVISION)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Multiple payment order message (Paymul) for the payment of customs duty
1822 MS 1481:2001 (CONFIRMED:2015) 50 RM 75.00
(First revision)
1823 MS ISO 1481:2013 Slotted pan head tapping screws (ISO 1481:2011, IDT) 13 RM 15.00
Banking status message (BANSTA) for the payment of customs duty (First
1824 MS 1482:2001 (CONFIRMED:2015) 39 RM 60.00
revision)
Multiple credit advice message (CREMUL) for the payment of customs duty
1825 MS 1483:2001 (CONFIRMED:2015) 53 RM 75.00
(First revision)
Multiple debit advice (DEBMUL) for the payment of customs duty (First
1826 MS 1484:2001 (CONFIRMED:2015) 53 RM 75.00
revision)
International movement of goods governmental regulatory (SANCRT) by the
1827 MS 1485:2001 (CONFIRMED:2015) 50 RM 75.00
customs (First revision)
1828 MS 1486:2001 (CONFIRMED:2015) Vocabulary on United Nations Standard Message (UNSM) (First revision) 13 RM 15.00
FIREFIGHTING HOSES – SEMI-RIGID HOSES FOR FIXED SYSTEMS (FIRST
1829 MS 1488:2006 29 RM 45.00
REVISION)
Fire extinguishing installations and equipment - Part 2 : Wet and dry fire
1830 MS 1489-2:2012 24 RM 30.00
fighting mains
Fire extinguishing installations and equipment - Part 1 :Hose reels and foam
1831 MS 1489-1:2012 17 RM 30.00
inlets (First revision)
MS 1492-2:2010 Welding - Recommendations for welding of metallic materials - Part 2: Arc
1832 70 RM 105.00
(CONFIRMED:2015) welding of ferritic steels (First revision)
WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS -
1833 MS 1492-1:2010 21 RM 30.00
PART 1: GENERAL GUIDANCE FOR ARC WELDING (FIRST REVISION)
MS 1492-3:2010 Welding - Recommendations for welding of metallic materials - Part 3: Arc
1834 30 RM 45.00
(CONFIRMED:2015) welding of stainless steels
MS 1492-4:2010 Welding - Recommendations for welding of metallic materials - Part 4: Arc
1835 27 RM 45.00
(CONFIRMED:2015) welding of aluminium and aluminium alloys
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1847 MS 1498:2011 Safety glass in building - Safety performance specification (First revision) 30 RM 45.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1850 MS 1499-4:2010 SENSORY EVALUATION - PART 4: SELECTION AND TRAINING OF PANELLIST 22 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 1502:2003 ISO GENERAL PURPOSE METRIC SCREW THREADS – GAUGES AND GAUGING
1862 37 RM 60.00
(CONFIRMED:2011) (ISO 1502:1996, IDT)
1870 MS 1509:2009 TEST METHOD FOR FILM HARDNESS BY PENCIL TEST (FIRST REVISION) 11 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1896 MS 1514:2009 GOOD MANUFACTURING PRACTICE (GMP) FOR FOOD (FIRST REVISION) 38 RM 60.00
1897 MS 1514:2012 (BM) Amalan Pengilangan yang Baik (GMP) bagi makanan (Semakan Pertama) 39 RM 60.00
METHODS OF SAMPLING AND TEST FOR PALM GLYCERINE : PART 1: SAMPLING
1898 MS 1515: PART 1:2001 19 RM 30.00
(ISO 2096:1972, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1908 MS 1518 : PART 1 : 2001 SPECIFICATION FOR GLYPHOSATE : PART 1 : GLYPHOSATE (TECHNICAL) 25 RM 30.00
METHODS OF TEST FOR HORMONE WEEDKILLERS OF THE PHENOXYACETIC ACID
1909 MS 1519:2001 69 RM 105.00
(2,4-D)
1910 MS 1521:2001 (CONFIRMED:2008) SPECIFICATION FOR POLYOLEFIN WOVEN OPEN-MOUTH SACKS 19 RM 30.00
1911 MS 1522:2015 Vitreous china water closet pans - Specification (Fourth revision) 44 RM 60.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1912 MS 1524:2012 Rubber - Determination of solvent extract (First revision) (ISO 1407:2011, MOD) 25 RM 30.00
Energy efficiency and use of renewable energy for non-residential buildings -
1913 MS 1525:2014, AMD.1: 2014 FREE 5 RM -
Code of practice (Second revision)
Energy efficiency and use of renewable energy for non-residential buildings -
1914 MS 1525:2014 74 RM 105.00
Code of practice (Second revision)
1920 MS 1530:2001, AMD. 1:2014 Specification for plastics washing basins AMENDMENT 1 FREE 2 RM -
1923 MS 1533:2002 (CONFIRMED:2012) Recommended practices in monitoring electric power quality 96 RM 150.00
DOMESTIC GAS COOKING APPLIANCES FOR USE WITH LIQUEFIED PETROLEUM
1924 MS 1535: PART 2:2002 16 RM 15.00
GASES : PART 2: GENERAL CONSTRUCTION
DOMESTIC GAS COOKING APPLIANCES FOR USE WITH LIQUEFIED PETROLEUM
1925 MS 1535 : PART 3 : 2002 44 RM 60.00
GASES : PART 3 : TEST METHODS
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1929 MS 1538:2002 SPECIFICATION FOR SPEED MONITORING DEVICE FOR ROAD VEHICLES 18 RM 30.00
Specification for portable fire extinguishers - Part 1: Construction and testing
1930 MS 1539-1:2018 93 RM 135.00
methodology (First revision)
SPECIFICATION FOR PORTABLE FIRE EXTINGUISHERS: PART 4: MAINTENANCE
1931 MS 1539: PART 4:2004 33 RM 45.00
OF PORTABLE FIRE EXTINGUISHERS – CODE OF PRACTICE
MS 1539-6:2010 Specification for portable fire extinguishers - Part 6: Specification for small
1932 29 RM 45.00
(CONFIRMED:2015) disposable fire extinguishers of aerosol type
SPECIFICATON FOR PORTABLE FIRE EXTINGUISHERS - PART 2: WHEELED FIRE
1933 MS 1539: PART 2:2006 36 RM 60.00
EXTINGUISHERS (ISO 11601:1999, MOD)
SPECIFICATION FOR PORTABLE FIRE EXTINGUISHERS - PART 8: CHEMICAL
1934 MS 1539-8:2010 24 RM 30.00
POWDERS (FIRST REVISION)
SPECIFICATION FOR PORTABLE FIRE EXTINGUISHERS: PART 1: CONSTRUCTION
1935 MS 1539: PART 1:2002 76 RM 120.00
AND TESTING METHODOLOGY
MS 1539: PART 1:2002, COR. SPECIFICATION FOR PORTABLE FIRE EXTINGUISHERS : PART 1 : CONSTRUCTION
1936 FREE 1 RM -
1:2004 AND TESTING METHODOLOGY
SPECIFICATION FOR PORTABLE FIRE EXTINGUISHERS – PART 3 : SELECTION AND
1937 MS 1539: PART 3:2003 33 RM 45.00
INSTALLATION – CODE OF PRACTICE (FIRST REVISION)
1938 MS 1539-5:2014 Portable fire extinguishers - Part 5: Fire extinguisher for use on class F fires 18 RM 30.00
SPECIFICATION FOR THE MATERIAL, MARKING AND DIMENSIONS OF CRIMP
1939 MS 1540:2002, AMD. 1:2011 TYPE CABLE LUGS FOR USE WITH COPPER CONDUCTORS IN LOW VOLTAGE FREE 2 RM -
APPLICATIONS
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1946 MS 1545 : 2002 RUBBER HOSES FOR AGRICULTURAL SPRAYING (ISO 1401:1999, MOD) 15 RM 15.00
RUBBER – DETERMINATION OFCRYSTALLIZATION EFFECTS BY HARDNESS
1947 MS 1546 : 2002 17 RM 30.00
MEASUREMENTS (ISO 3387:1994, MOD)
Rubber, latex - Determination of density between 5 ͦ c and 40 ͦ c (ISO 705:1994,
1948 MS 1547:2002 (CONFIRMED:2013) 14 RM 15.00
MOD)
TEST METHOD FOR DETERMINATION OF RESIDUAL POWDER ON POWDER -FREE
1949 MS 1549 : 2002 13 RM 15.00
RUBBER MEDICAL GLOVES
TEST METHOD FOR DETERMINATION OF RESIDUAL POWDER ON POWDERED
1950 MS 1550 : 2002 13 RM 15.00
RUBBER MEDICAL GLOVES
SPECIFICATION FOR SODA ASH (SODIUM CARBONATE) USED FOR POTABLE
1951 MS 1551:2002 30 RM 45.00
WATER SUPPLY
1952 MS 1552 : PART 2 : 2002 SPECIFICATION FOR RAISED ACCESS FLOOR SYSTEM : PART 2 : TEST METHODS 69 RM 105.00
SPECIFICATION FOR RAISED ACCESS FLOOR SYSTEM : PART 1 : GENERAL
1953 MS 1552 : PART 1 : 2002 29 RM 45.00
REQUIREMENTS
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1955 MS 1553:2002 CODE OF PRACTICE ON WIND LOADING FOR BUILDING STRUCTURE 107 RM 165.00
1956 MS 1553:2002, AMD.1:2013 Code of practice on wind loading for building structure FREE 9 RM -
Electromagnetic compatibility (EMC) - Limits - Limitation of emission of
1957 MS 1555:2002 (CONFIRMED:2012) harmonic currents in low-voltage power supply systems for equipment with 18 RM 30.00
rated current greater than 16A
1959 MS 1557:2002 (CONFIRMED:2010) SPECIFICATION FOR PLASTICS LOCKABLE CONTAINERS FOR HOUSEHOLD WARES 14 RM 15.00
1960 MS 1558:2011 PLASTICS FOOD CONTAINERS WITH LIDS - SPECIFICATION (FIRST REVISION) 14 RM 15.00
METHOD OF TEST FOR PERMEABILITY OF THERMOPLASTIC CONTAINERS TO
1961 MS 1559 : 2002 15 RM 15.00
PACKAGED REAGENTS OR PROPRIETARY PRODUCTS
Method of test for permeability of thermoplastic containers to packaged
1962 MS 1559:2002 (CONFIRMED:2013) 15 RM 15.00
reagents or proprietary products
SPECIFICATION FOR MEASURING CUPS, SPOONS AND LITRE MEASURES FOR
1963 MS 1560 : 2002 19 RM 30.00
DOMESTIC PURPOSES
Specification for measuring cups, spoons and litre measures for domestic
1964 MS 1560:2002, AMD. 1:2014 FREE 2 RM -
purposes (AMENDMENT 1)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1975 MS 1566 : 2002 DEFINITIONS OF COMMON TERMS USED IN THE TYRE INDUSTRY – SOLID TYRES 13 RM 15.00
RUBBER - DETERMINATION OF METAL CONTENT BY ATOMIC ABSORPTION
1976 MS 1568 : PART 7 : 2002 15 RM 15.00
SPECTROMETRY - PART 7 : DETERMINATION OF CALCIUM CONTENT
1978 MS 1570 : 2003 METHOD OF TEST FOR CHEMICAL ANALYSIS OF PUTTY LIME 19 RM 30.00
1979 MS 1571 : 2003 SPECIFICATION FOR COPPER SULPHATE USED FOR POTABLE WATER SUPPLY 24 RM 30.00
METHOD OF SAMPLING AND TEST FOR TEA : PREPARATION OF GROUND
1980 MS ISO 1572:1994 12 RM 30.00
SAMPLE OF KNOWN DRY MATTER CONTENT (ISO 1572:1980, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
1981 MS 1572 : 2003 SPECIFICATION FOR SODIUM ALUMINATE USED FOR POTABLE WATER SUPPLY 21 RM 30.00
METHOD OF SAMPLING AND TEST FOR TEA : DETERMINATION OF LOSS IN
1982 MS ISO 1573:1994 10 RM 15.00
MASS AT 103 °C (ISO 1573:1980, IDT)
1983 MS 1573 : 2003 SPECIFICATION FOR SODIUM FLUORIDE USED FOR POTABLE WATER SUPPLY 21 RM 30.00
SAMPLING AND PREPARING AQUEOUS SOLUTIONS OF ENGINE COOLANTS OR
1984 MS 1574 : 2003 11 RM 15.00
ANTIRUSTS FOR TESTING PURPOSES
METHOD OF SAMPLING AND TEST FOR TEA : DETERMINATION OF TOTAL ASH
1985 MS ISO 1575:1994 7 RM 15.00
(ISO 1575:1980, IDT)
TEST METHODS FOR WATER IN ENGINE COOLANT CONCENTRATE BY THE KARL
1986 MS 1575 : 2003 17 RM 30.00
FISCHER REAGENT METHOD
METHOD OF SAMPLING AND TEST FOR TEA : DETERMINATION OF WATER
1987 MS ISO 1576:1994 10 RM 15.00
SOLUBLE ASH AND WATER INSOLUBLE ASH(ISO 1576:1988, IDT)
SPECIFICATION FOR POTASSIUM PERMANGANATE USED FOR POTABLE WATER
1988 MS 1576 : 2003 25 RM 30.00
SUPPLY
METHOD OF SAMPLING AND TEST FOR TEA :DETERMINATION OF ACID SOLUBLE
1989 MS ISO 1577:1994 9 RM 15.00
ASH (ISO 1577:1987, IDT)
SPECIFICATION FOR 15 A PLUGS AND SOCKET-OUTLETS FOR DOMESTIC AND
1990 MS 1577 : 2003 33 RM 30.00
SIMILAR PURPOSES
Specification for flat non-rewirable two-pole plugs, 2.5 A, 250 V with cord, for
1991 MS 1578:2003 (CONFIRMED:2015) 31 RM 30.00
the connection of Class II - Equipment for household and similar purposes
METHOD OF SAMPLING AND TEST FOR TEA : DETERMINATION OF ALKALINITY
1992 MS ISO 1578:1994 10 RM 15.00
OF WATERSOLUBLE ASH (ISO 1578:1975, IDT)
SPECIFICATION FOR PORTABLE 2 PIN SOCKET-OUTLETS FOR CLASS II
1993 MS 1579 : 2003 47 RM 75.00
EQUIPMENT FOR HOUSEHOLD AND SIMILAR PURPOSES
MS 1581: PART 3:2003 FURNITURE - STORAGE UNITS: PART 3: METHODS FOR DETERMINATION OF
1994 17 RM 30.00
(CONFIRMED:2011) STABILITY
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2011 MS 1590:2003 CARBON DIOXIDE EXTINGUISHING SYSTEMS - DESIGN AND INSTALLATION 59 RM 90.00
Standard test method for environmental stress crack resistance of plastics
2012 MS 1593:2014 16 RM 30.00
injection moulded open head pails (First revision)
METHOD OF TEST FOR COLUMN CRUSH PROPERTIES OF BLOWN
2013 MS 1594:2003 14 RM 15.00
THERMOPLASTIC CONTAINERS
Determination of concentration and mass flow of particulate matter in flue gas
2014 MS 1596:2003 (CONFIRMED:2013) 55 RM 75.00
for stationary source emissions
Household and similar electrical appliances - Safety - Part 2-40: Particular
2015 MS 1597-2-40:2017 requirements for electrical heat pumps, air-conditioners and dehumidifiers 78 RM 120.00
(Second revision) (IEC 60335-2-40:2013, MOD)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2030 MS 1600-12:2012 Fire resistance tests - Part 12: Service installations - Ducts 42 RM 60.00
2031 MS 1600-2:2012 Fire resistance tests - Part 2: Alternative and additional procedures 24 RM 30.00
2032 MS 1600-3:2012 Fire resistance tests - Part 3: Non-loadbearing elements - Walls 38 RM 60.00
2033 MS 1600-7:2012 Fire resistance tests - Part 7: Loadbearing elements - Walls 31 RM 45.00
MS 1601-1:2009 Specification for fire resistant doorsets - Part 1: Design requirements and
2034 34 RM 45.00
(CONFIRMED:2015) variation from the tested specimen
MS 1601-6:2007 Specification for fire resistant doorsets - Part 6: Requirements and method of
2035 29 RM 45.00
(CONFIRMED:2015) determining the performance of controlled door closing devices
MS 1601-9:2007 Specification for fire resistant doorsets - Part 9: Requirements and method of
2036 26 RM 45.00
(CONFIRMED:2015) determining the performance of door coordinator devices
MS 1601-3:2009 Specification for fire resistant doorsets - Part 3: Code of practice for installation
2037 21 RM 30.00
(CONFIRMED:2015) of fire resistant doorsets
MS 1601-4:2009 Specification for fire resistant doorsets - Part 4: Requirements and method of
2038 38 RM 60.00
(CONFIRMED:2015) determining the performance of mortice locksets
MS ISO 1604:2005 BELT DRIVES - ENDLESS WIDE V-BELTS FOR INDUSTRIAL SPEED-CHANGERS AND
2039 19 RM 30.00
(CONFIRMED:2012) GROOVE PROFILES FOR CORRESPONDING PULLEYS (ISO 1604:1989, IDT)
PLASTICS - VINYL CHLORIDE HOMOPOLYMER AND COPOLYMER RESINS - SIEVE
2040 MS ISO 1624:2007 16 RM 30.00
ANALYSIS IN WATER (ISO 1624:2001, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2046 MS ISO 1629:2004 RUBBERS AND LATICES – NOMENCLATURE (ISO 1629:1995, MOD) 11 RM 15.00
MS ISO 1675:1995 PLASTICS - LIQUID RESINS - DETERMINATION OF DENSITY BY THE PYKNOMETER
2047 11 RM 15.00
(CONFIRMED:2008) METHOD
ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS -
2048 MS 1700:1998 130 RM 180.00
REQUIREMENTS
HOT-ROLLED CARBON STEEL STRIP AND SHEET OF COMMERCIAL AND
2049 MS 1705 : 2003 19 RM 30.00
DRAWING QUALITIES (ISO 6317:2000, MOD)
2050 MS 1706:2003 TEST METHOD FOR ASH CONTENT OF ENGINE COOLANTS AND ANTIRUSTS 13 RM 15.00
TEST METHOD FOR RELATIVE DENSITY OF ENGINE COOLANT CONCENTRATES
2051 MS 1707:2003 10 RM 15.00
AND ENGINE COOLANTS BY THE HYDROMETER
2052 MS 1708:2003 TEST METHOD FOR CORROSION TEST FOR ENGINE COOLANTS 20 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2054 MS 1710:2003 TEST METHOD FOR TRACE CHLORIDE ION IN ENGINE COOLANTS 12 RM 15.00
2055 MS 1711 : PART 2 : 2003 FURNITURE – OFFICE CHAIR (ADJUSTABLE) : PART 2 : SAFETY REQUIREMENTS 10 RM 15.00
2056 MS 1711 : PART 3 : 2003 FURNITURE – OFFICE CHAIR (ADJUSTABLE) : PART 3 : SAFETY TEST METHODS 29 RM 45.00
MS 1711-1:2003 Furniture - Office chair (adjustable): Part 1: Dimensions - Determination of
2057 32 RM 45.00
(CONFIRMED:2015) dimensions
SPECIFICATION FOR VISUAL STRENGTH GRADING OF TROPICAL HARDWOOD
2058 MS 1714 : 2003 36 RM 60.00
TIMBER
2059 MS 1715:2018 Chocolate and chocolate products - Specification (Second revision) 13 RM 15.00
2060 MS 1715:2010 CHOCOLATE AND CHOCOLATE PRODUCTS- SPECIFICATION (FIRST REVISION) 16 RM 30.00
2061 MS 1716:2007 LIMAU BALI (CITRUS MAXIMA L.) - ANAK BENIH KLON - SPESIFIKASI 14 RM 15.00
SPECIFICATION FOR POMELO (Citrus maxima L.) CLONAL MATERIALS FOR
2062 MS 1716 : 2003 19 RM 30.00
PLANTING
2063 MS 1717: PART 4 : 2003 SPECIFICATION FOR DIURON: PART 4: SUSPENSION CONCENTRATE 10 RM 15.00
2064 MS 1717 : PART 1 : 2003 SPECIFICATION FOR DIURON: PART 1: DIURON TECHNICAL 9 RM 15.00
2065 MS 1717: PART 3 : 2003 SPECIFICATION FOR DIURON: PART 3: DIURON WATER-DISPERSIBLE GRANULES 11 RM 15.00
2066 MS 1717: PART 2:2003 SPECIFICATION FOR DIURON: PART 2: DIURON WETTABLE POWDER 10 RM 15.00
2067 MS 1718 : 2003 SODIUM HYPOCHLORITE FOR USE IN POTABLE WATER SUPPLY – SPECIFICATION 29 RM 45.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2068 MS 1719:2003 (CONFIRMED:2014) Specification for raised pavement markers (RPM) 47 RM 75.00
WELDED CARBON STEEL GAS CYLINDERS – PERIODIC INSPECTION AND TESTING
2069 MS 1720 : 2003 36 RM 60.00
(ISO 10460:1993, MOD)
Occupational safety and health (OSH) management systems - Requirements
2070 MS 1722:2011 20 RM 30.00
(First revision)
PERFORMANCE EVALUATION OF AIR POLLUTION CONTROL AND TREATMENT
2071 MS 1723 : 2003 24 RM 30.00
SYSTEMS : MECHANICAL DUST COLLECTORS
Performance evaluation of air pollution control and treatment systems - Dry
2072 MS 1723:2017 47 RM 75.00
dust collectors - Specification (First revision)
SODIUM SILICOFLUORIDE FOR USE IN POTABLE WATER SUPPLY –
2073 MS 1724 : 2004 25 RM 30.00
SPECIFICATION
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2095 MS 1742: PART 4:2004 VEHICLE SECURITY SYSTEMS: PART 4: SPECIFICATION FOR IMMOBILIZER 24 RM 30.00
MS 1742-2-1:2004 Vehicle security systems: Part 2: Locking systems: Section 1: Specification for
2096 15 RM 15.00
(CONFIRMED:2013) locking systems
MS 1742-2-4:2005 Vehicle security systems - Part 2: Locking systems - Section 4: Specification for
2097 15 RM 15.00
(CONFIRMED:2013) devices for prevention against unauthorised use
MS 1742-2-3:2004 Vehicle security systems: Part 2: Locking systems: Section 3: Specification for
2098 13 RM 15.00
(CONFIRMED:2013) dead locking systems
MS 1742-1:2004 Vehicle security systems: Part 1: Guidelines to the application of security
2099 11 RM 15.00
(CONFIRMED:2013) systems to vehicles
MS 1742-2-2:2004 Vehicle security systems: Part 2: Locking systems: Section 2: Specification for
2100 13 RM 15.00
(CONFIRMED:2013) central power locking systems
MS 1742-3:2004
2101 Vehicle security systems: Part 3: Specification for alarm systems 45 RM 60.00
(CONFIRMED:2013)
Road vehicles - Guidelines for the implementation of the assignment of World
2102 MS 1743:2004 (CONFIRMED:2013) Manufacturer Identifier (WMI) Codes for Vehicle Identification Number (VIN) 11 RM 15.00
Systems and for World Parts Manufacturer Identifier (WPMI) Codes
Road vehicles - Vehicle identification number (VIN) - Location and attachment
2103 MS 1744:2004 (CONFIRMED:2016) 9 RM 15.00
(ISO 4030:1983, MOD)
MS EN 1744-1:2011 Tests for chemical properties of aggregates - Part 1: Chemical analysis (Second
2104 71 RM 105.00
(CONFIRMED:2015) revision)
MS EN 1744-5:2011 Tests for chemical properties of aggregates - Part 5: Determination of acid
2105 15 RM 15.00
(CONFIRMED:2015) soluble chloride salts
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2114 MS 1745 : PART 1 : 2004 FIRE DETECTION AND ALARM SYSTEMS - PART 1: INTRODUCTION 14 RM 15.00
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 14: GUIDELINES FOR
2115 MS 1745-14:2009 71 RM 105.00
PLANNING, DESIGN, INSTALLATION, COMMISSIONING, USE AND MAINTENANCE
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 12: SMOKE DETECTORS -
2116 MS 1745: PART 12:2005 63 RM 90.00
LINE DETECTORS USING AN OPTICAL LIGHT BEAM
MS 1745-5:2005
2117 Fire detection and fire alarm systems - Part 5: Heat detectors - Point detectors 57 RM 90.00
(CONFIRMED:2015)
MS 1745-10:2005 Fire detection and fire alarm systems - Part 10: Flame detectors - Point
2118 48 RM 75.00
(CONFIRMED:2015) detectors
MS 1746-9:2008 Gaseous fire-extinguishing systems - Physical properties and system design -
2119 19 RM 30.00
(CONFIRMED:2015) Part 9: HFC 227EA extinguishant (First revision) (ISO 14520-9:2006, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2129 MS 1747-3:2013 Textiles - Malaysian woven fabric - Part 3: Tenun Pahang 18 RM 30.00
TEKSTIL – TENUNAN MALAYSIA – BAHAGIAN 1: SONGKET MALAYSIA
2130 MS 1747: BAHAGIAN 1:2007 18 RM 30.00
(ULANGKAJI PERTAMA)
TEXTILES - MALAYSIAN WOVEN FABRIC - PART 1: MALAYSIAN SONGKET (FIRST
2131 MS 1747-1:2009 18 RM 30.00
REVISION)
2132 MS 1747-3:2018 (BM) Tekstil - Tenunan Malaysia - Bahagian 3: Tenun Pahang (Semakan pertama) 22 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2133 MS 1747-1:2018 (BM) Tekstil - Tenunan Malaysia - Bahagian 1: Songket Malaysia (Semakan kedua) 22 RM 30.00
2134 MS 1747-2:2014 Tekstil - Tenunan Malaysia - Bahagian 2: Tenun Ikat Iban 20 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2148 MS 1758:2012 Thermal Insulation - Vocabulary (First revision) (ISO 9229:2007, MOD) 32 RM 45.00
2149 MS 1759:2015 Geographic information/geomatics - Feature and attribute codes (First revision) 367 RM 525.00
Guide on voltage dips and short interruptions on public electric power supply
2150 MS 1760:2004 (CONFIRMED:2015) 55 RM 390.00
systems
2151 MS 1761:2004 PLASTICS PIPES AND FITTINGS – DETERMINATION OF THE OPACITY 9 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS 1767-1:2004 Road vehicles and internal combustion engines - Filter vocabulary - Part 1:
2161 23 RM 30.00
(CONFIRMED:2013) Definitions of filters and filter components (ISO 11841-1:2000, MOD)
2162 MS 1768:2004 HOT-ROLLED CARBON STEEL STRIP FOR PIPES AND TUBES 17 RM 30.00
2164 MS 1770 : 2004 PLASTICS FILMS – GUIDELINES ON THE USE FOR STRETCH WRAPPING 16 RM 30.00
2165 MS 1770:2004 (CONFIRMED:2013) Plastics films - Guidelines on the use for stretch wrapping 17 RM 30.00
2166 MS 1771 : 2004 PLASTICS FILMS – GUIDELINES ON THE USE FOR SHRINK WRAPPING 22 RM 30.00
FLEXIBLE PACKAGING MATERIAL – DETERMINATION OF RESIDUAL SOLVENTS BY
2167 MS 1772: PART 1:2004 21 RM 30.00
STATIC HEADSPACE GAS CHROMATOGRAPHY – PART 1: ABSOLUTE METHODS
FLEXIBLE PACKAGING MATERIAL – DETERMINATION OF RESIDUAL SOLVENTS BY
2168 MS 1772: PART 2:2004 17 RM 30.00
STATIC HEADSPACE GAS CHROMATOGRAPHY – PART 2: INDUSTRIAL METHODS
SAFETY OF TOYS - PART 5: CHEMICAL TOYS (SETS) OTHER THAN EXPERIMENTAL
2169 MS 1774: PART 5:1998 32 RM 45.00
SETS
SAFETY OF TOYS - PART4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED
2170 MS 1774: PART 4:1998 17 RM 30.00
ACTIVITIES
2171 MS 1774: PART 6:1998 SAFETY OF TOYS - PART 6: GRAPHICAL SYMBOL FOR AGE WARNING LABELLING 14 RM 15.00
2172 MS 1775:2004 (CONFIRMED:2015) Notification message for declaration of dangerous goods 16 RM 30.00
ROAD VEHICLES - FRONT AND REAR POSITION (SIDE) LAMPS, STOP-LAMPS AND
2173 MS 1776:2004 (CONFIRMED:2011) 20 RM 30.00
END-OUTLINE MARKER LAMPS -SPECIFICATION
CABLE TRUNKING AND CABLE DUCTING SYSTEMS FOR ELECTRICAL
2174 MS 1777: PART 1:2004 33 RM 45.00
INSTALLATIONS – PART 1: GENERAL REQUIREMENTS
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2186 MS 1783:2005 EDIBLE ICE IN FOOD PROCESSING AND FOOD SERVICES - SPECIFICATION 9 RM 15.00
GOOD AGRICULTURAL PRACTICE (GAP) - PART 3: RUBBER (HEVEA BRASILIENSIS
2187 MS 1784: PART 3:2005 19 RM 30.00
MUELL. ARG.)
2188 MS 1784: PART 7:2007 GOOD AGRICULTURAL PRACTICE (GAP) - PART 7: FRUITS AND VEGETABLES 19 RM 30.00
2189 MS 1784: PART 6:2007 GOOD AGRICULTURAL PRACTICE (GAP) - PART 6: FLOWERS AND ORNAMENTALS 19 RM 30.00
2190 MS 1784: PART 4:2005 GOOD AGRICULTURAL PRACTICE (GAP) - PART 4: COCOA (THEOBROMA CACAO) 20 RM 30.00
2195 MS 1784: PART 5:2005 GOOD AGRICULTURAL PRACTICE (GAP) - PART 5: PEPPER (PIPER NIGRUM L) 19 RM 30.00
2196 MS 1784:2016 Good Agricultural Practice (GAP) - Crop commodities (Second revision) 21 RM 30.00
2198 MS 1785:2008, AMD. 1:2015 Guide for general planning of waste sampling AMENDMENT 1 FREE 2 RM -
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2217 MS 1790:2008 PLASTICS PETRI DISHES FOR SINGLE USE - SPECIFICATION 17 RM 30.00
2221 MS 1795:2005 (CONFIRMED:2015) Steels for cold heading and cold extruding - Specification (ISO 4954:1993, NEQ) 38 RM 60.00
Rubber, raw natural and raw synthetic - Sampling and further preparative
2222 MS ISO 1795:2011 13 RM 15.00
procedures (First revision) (ISO 1795:2007, IDT)
CAST CARBON STEELS FOR GENERAL ENGINEERING PURPOSES (ISO 3755:1991,
2223 MS 1796:2005, AMD. 1:2007 FREE 1 RM -
MOD)
CAST CARBON STEELS FOR GENERAL ENGINEERING PURPOSES (ISO 3755:1991,
2224 MS 1796:2005 11 RM 15.00
MOD)
ANHYDROUS MILK FAT - DETERMINATION OF STEROL COMPOSITION BY GAS
2225 MS 1797:2008 22 RM 30.00
LIQUID CHROMATOGRAPHY (REFERENCE METHOD) (ISO 12078:2006, MOD)
MS ISO 1798:1998 Flexible cellular polymetric materials - Determination of tensile strength and
2226 13 RM 15.00
(CONFIRMED:2012) Elongation at break
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2239 MS 1812:2005 TEST METHODS FOR CONSTITUENT CONTENT OF COMPOSITE MATERIALS 18 RM 30.00
2240 MS 1813:2005 TEST METHOD FOR IGNITION LOSS OF CURED REINFORCED RESINS 9 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2244 MS 1816:2005 SAND AND GRAVEL FOR USE IN POTABLE WATER SUPPLY - SPECIFICATION 15 RM 15.00
2254 MS 1821: PART 99:2005 PETROLEUM INDUSTRY - TERMINOLOGY - PART 99: GENERAL AND INDEX 20 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2259 MS 1822:2005, AMD.1:2011 CLASSIFICATION AND DEFINITION OF POWER-DRIVEN VEHICLES AND TRAILERS FREE 2 RM -
2260 MS 1822:2005 CLASSIFICATION AND DEFINITION OF POWER-DRIVEN VEHICLES AND TRAILERS 23 RM 30.00
2261 MS 1824:2005 (CONFIRMED:2013) Road vehicles - External projections for M1 vehicles - General requirements 18 RM 30.00
TEST METHOD FOR RESERVE ALKALINITY OF ENGINE COOLANTS AND
2262 MS 1825:2005 10 RM 15.00
ANTIRUSTS
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling -
2263 MS ISO 1825:2012 37 RM 60.00
Specification (ISO 1825:2010, IDT)
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF SHEAR
2264 MS ISO 1827:2008 MODULUS AND ADHESION TO RIGID PLATES - QUADRUPLE-SHEAR METHODS 15 RM 30.00
(FIRST REVISION) (ISO 1827:2007, IDT)
MS 1827-2:2005 Road vehicles - Ignition systems - Part 2: Electrical performance and function
2265 25 RM 30.00
(CONFIRMED:2016) test methods (ISO 6518-2:1995, COR. 1:1997, MOD)
Spheroidal graphite cast irons - Classification (First revision) (ISO 1083:2004,
2266 MS 1828:2013 42 RM 60.00
MOD)
STANDARD TEST METHOD FOR FLASH AND FIRE POINTS BY CLEVELAND OPEN
2267 MS 1830:2005 20 RM 30.00
CUP TESTER
MS ISO 1831:1993
2268 Printing specifications for optical character recognition 56 RM 90.00
(CONFIRMED:2015)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2274 MS 1833:2005 TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS 17 RM 30.00
TEXTILES - QUANTITATIVE CHEMICAL ANALYSIS - PART 2: TERNARY FIBRE
2275 MS ISO 1833-2:2010 25 RM 30.00
MIXTURES (FIRST REVISION) (ISO 1833-2:2006, IDT)
TEXTILES - QUANTITATIVE CHEMICAL ANALYSIS - PART 1: GENERAL PRINCIPLES
2276 MS ISO 1833-1:2010 29 RM 45.00
OF TESTING (FIRST REVISION) (ISO 1833-1:2006, IDT)
TEXTILES - QUANTITATIVE CHEMICAL ANALYSIS - PART 5: MIXTURES OF
2277 MS ISO 1833-5:2010 VISCOSE, CUPRO OR MODAL AND COTTON FIBRES (METHOD USING SODIUM 12 RM 15.00
ZINCATE) (FIRST REVISION) (ISO 1833-5:2006, IDT)
TEXTILES - QUANTITATIVE CHEMICAL ANALYSIS - PART 3: MIXTURES OF
2278 MS ISO 1833-3:2010 ACETATE AND CERTAIN OTHER FIBRES (METHOD USING ACETONE) (FIRST 11 RM 15.00
REVISION) (ISO 1833-3:2006, IDT)
TEXTILES - QUANTITATIVE CHEMICAL ANALYSIS - PART 9: MIXTURES OF
2279 MS ISO 1833-9:2010 ACETATE AND TRIACETATE FIBRES (METHOD USING BENZYL ALCOHOL) (FIRST 12 RM 15.00
REVISION) (ISO 1833-9:2006, IDT)
TEXTILES - QUANTITATIVE CHEMICAL ANALYSIS - PART 4: MIXTURES OF
2280 MS ISO 1833-4:2010 CERTAIN PROTEIN AND CERTAIN OTHER FIBRES (METHOD USING 12 RM 15.00
HYPOCHLORITE) (FIRST REVISION) (ISO 1833-4:2006, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2294 MS 1837:2018 Installation of grid-connected photovoltaic (PV) system (Second revision) 48 RM 75.00
INSTALLATION OF GRID-CONNECTED PHOTOVOLTAIC (PV) SYSTEM (FIRST
2295 MS 1837:2010 70 RM 105.00
REVISION)
Installation of grid-connected photovoltaic (PV) system (First revision)
2296 MS 1837:2010, AMD. 1:2013 FREE 2 RM -
AMENDMENT 1
Heavy duty crimp type cable lugs for use with XLPE insulated and circular
compact copper conductors in single and multi core power cable applications
2297 MS 1838:2015 16 RM 30.00
up to 36 kV - Specification for the material, marking and dimensions (First
Revision)
HEAVY DUTY CRIMP TYPE CABLE LUGS FOR USE WITH XLPE INSULATED AND
CIRCULAR COMPACT COPPER CONDUCTORS IN SINGLE AND MULTI CORE
2298 MS 1838:2005, AMD. 1:2011 FREE 2 RM -
POWER CABLE APPLICATIONS UP TO 36 Kv - SPECIFICATION FOR THE MATERIAL,
MARKING AND DIMENSIONS
HEAVY DUTY CRIMP TYPE CABLE LUGS FOR USE WITH XLPE INSULATED AND
CIRCULAR COMPACT COPPER CONDUCTORS IN SINGLE AND MULTI CORE
2299 MS 1838:2005 17 RM 30.00
POWER CABLE APPLICATIONS UP TO 36 kV - SPECIFICATION FOR THE
MATERIAL, MARKING AND DIMENSIONS
MS 1839-1:2005
2300 Furniture - Office tables - Part 1: Dimensions 13 RM 15.00
(CONFIRMED:2013)
2301 MS ISO 1839:1994 METHOD OF SAMPLING AND TEST FOR TEA : SAMPLING (ISO 1839:1980, IDT) 14 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS 1839-2:2005
2302 Furniture - Office tables - Part 2: Mechanical safety requirements 9 RM 15.00
(CONFIRMED:2013)
MS 1839-3:2005 Furniture - Office tables - Part 3: Methods for the determination of the stability
2303 17 RM 30.00
(CONFIRMED:2013) and the mechanical strength of the structure
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: HIGH-VOLTAGE
2304 MS 1840:2005 298 RM 435.00
ALTERNATING-CURRENT CIRCUIT-BREAKERS (IEC 62271-100:2003, MOD)
SEAMLESS, WELDED AND HEAVILY COLD AUSTENITIC STAINLESS STEEL PIPES -
2305 MS 1841:2010 29 RM 45.00
SPECIFICATION (FIRST REVISION)
WROUGHT AUSTENITIC STAINLESS STEEL PIPING FITTINGS - SPECIFICATION
2306 MS 1842:2010 19 RM 30.00
(FIRST REVISION)
FRUIT AND VEGETABLE PRODUCTS - DETERMINATION OF PH (ISO
2307 MS ISO 1842:2010 9 RM 15.00
1842:1991,IDT)
CASTINGS, AUSTENITIC, FOR PRESSURE-CONTAINING PARTS - SPECIFICATION
2308 MS 1843:2010 16 RM 30.00
(FIRST REVISION)
TEST METHOD FOR WATER VAPOR CONTENT OF GASEOUS FUELS USING
2309 MS 1844:2005 8 RM 15.00
ELECTRONIC MOISTURE ANALYZERS
FLEXIBLE RETORT FOOD POUCHES – GUIDELINES FOR USE AND HANDLING IN
2310 MS 1845:2005 13 RM 15.00
THE PROCESSING ENVIRONMENT
Steel and steel products - General technical delivery requirements (First
2311 MS 1846:2016 23 RM 30.00
revision)
REQUIREMENTS FOR COMPRESSION IGNITION (C.I.) AND NATURAL GAS (N.G.)
ENGINES AS WELL AS POSITIVE-IGNITION (P.I.) ENGINES FUELLED WITH LPG
2312 MS 1847:2007 169 RM 240.00
AND VEHICLES EQUIPPED WITH C.I. AND NG. ENGINES FUELLED WITH REGARD
TO THE EMISSIONS OF POLLUTANTS BY THE ENGINE
2315 MS 1850: PART 2:2005 WATER QUALITY - SAMPLING - PART 2: GUIDANCE ON SAMPLING TECHNIQUES 19 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2335 MS 1862:2005 CARBON STEEL TUBES FOR MACHINE STRUCTURAL PURPOSES - SPECIFICATION 24 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Boxes and enclosures for electrical accessories for household and similar fixed
MS 1873-23:2007
2353 electrical installations - Part 23: Particular requirements for floor boxes and 18 RM 30.00
(CONFIRMED:2015)
enclosures (IEC 60670-23:2006, IDT)
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1:
2354 MS ISO 1873-1:2012 Designation systems and basis for specifications (First revision) (ISO 1873 -1: 16 RM 30.00
1995, IDT)
2355 MS 1875:2018 Groundnuts (Arachis hypogaea L.) - Specification (First revision) 17 RM 30.00
2364 MS 1882:2005 (CONFIRMED:2013) Piston type float operated valves - specification 23 RM 30.00
MS 1883-2:2005
2365 Software engineering - Product quality - Part 2: External metrics (First revision) 104 RM 150.00
(CONFIRMED:2015)
MS 1883-3:2005
2366 Software engineering - Product quality - Part 3: Internal metrics (First revision) 80 RM 120.00
(CONFIRMED:2015)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS 1883-4:2005 Software engineering - Product quality - Part 4: Quality in use metrics (First
2367 75 RM 105.00
(CONFIRMED:2015) revision) (ISO/IEC TR 9126-4:2004, IDT)
MS 1883-1:2005 Software engineering - Product quality - Part 1: Quality model (First revision)
2368 38 RM 60.00
(CONFIRMED:2015) (ISO/IEC 9126-1:2001, IDT)
ROAD VEHICLES - PROTECTION OF THE DRIVER AGAINST THE STEERING
2369 MS 1884:2005 (CONFIRMED:2012) 35 RM 45.00
MECHANISM IN THE EVENT OF IMPACT- SPECIFICATION
2370 MS 1885:2005 (CONFIRMED:2013) Road vehicles - Passenger cars - Arrangement of foot controls 23 RM 30.00
2371 MS 1886:2005 TEST METHOD FOR pH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE 14 RM 15.00
2372 MS 1887:2005 TEST METHOD FOR PARTICLE SIZE OF SOAPS AND OTHER DETERGENTS 7 RM 15.00
Child care articles - Wheeled child conveyances - Safety requirements and test
2373 MS EN 1888:2015 81 RM 120.00
methods
WATER QUALITY – DETECTION AND ENUMERATION OF COLIFORM ORGANISMS,
THERMOTOLERANT COLIFORM ORGANISMS AND PRESUMPTIVE ESCHERICHIA
2374 MS 1888:2007 21 RM 30.00
COLI – MULTIPLE TUBE (MOST PROBABLE NUMBER) METHOD (ISO 9308-
2:1990, MOD)
Test methods for electrical conductivity of aviation and distillate fuels (First
2375 MS 1889:2012 24 RM 30.00
revision)
2376 MS 1890:2012 Test method for calculated cetane index of distillate fuels (First revision) 12 RM 15.00
TEST METHOD FOR SULPHUR IN PETROLEUM PRODUCTS BY WAVELENGTH
2377 MS 1891:2005 15 RM 15.00
DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
Test method for sulphur in petroleum products by wavelength dispersive x-ray
2378 MS 1891:2012 20 RM 30.00
fluorescence spectrometry (First revision)
2379 MS ISO 1891:2012 Fasteners - Terminology (First revision) (ISO 1891:2009, IDT) 52 RM 75.00
TEST METHOD FOR EVALUATING LUBRICITY OF DIESEL FUELS BY THE HIGH-
2380 MS 1892:2005 (CONFIRMED:2011) 12 RM 15.00
FREQUENCY RECIPROCATING RIG (HFRR)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Test method for density, relative density (specific gravity), or API gravity of
2381 MS 1893:2005 (CONFIRMED:2012) crude petroleum and liquid petroleum products by hydrometer method (First 16 RM 30.00
revision)
Test method for determination of benzene, toluene, ethylbenzene, p/m-xylene,
MS 1894:2005
2382 o-xylene, c9 and heavier aromatics, and total aromatics in finished gasoline by 20 RM 30.00
(CONFIRMED:2012) gas chromatography
2383 MS 1895:2005 TEST METHOD FOR CETANE NUMBER OF DIESEL FUEL OIL 47 RM 75.00
2384 MS 1895:2012 Test method for cetane number of diesel fuel oil (First revision) 24 RM 30.00
Test method for evaluating load containment performance of stretch wrap
2385 MS 1896:2005 (CONFIRMED:2012) 10 RM 15.00
films by vibration testing
Test method for evaluating abrasion resistance of stretch wrap films by
2386 MS 1897:2005 (CONFIRMED:2012) 9 RM 15.00
vibration testing
TEST METHOD FOR PROTRUSION PUNCTURE RESISTANCE OF STRETCH WRAP
2387 MS 1898:2005 (CONFIRMED:2011) 12 RM 15.00
FILM
TEST METHODS FOR HOT SEAL STRENGTH (HOT TACK) OF THERMOPLASTIC
2388 MS 1899:2005 POLYMERS AND BLENDS COMPRISING THE SEALING SURFACES OF FLEXIBLE 13 RM 15.00
WEBS
Shariah-based quality management systems - Requirements with guidance
2389 MS 1900:2014 38 RM 60.00
(First revision)
QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FROM ISLAMIC
2390 MS 1900:2005 45 RM 60.00
PERSPECTIVES
Sistem pengurusan kualiti berasaskan Syariah - Keperluan dengan panduan
2391 MS 1900:2015 (BM) 39 RM 60.00
(Semakan pertama)
MALAYSIAN ELECTRONIC PASSPORT – PART 5: GUIDELINES FOR LOGICAL DATA
2392 MS 1901: PART 5:2007 11 RM 15.00
STRUCTURE
2393 MS 1901: PART 1:2006 MALAYSIAN ELECTRONIC PASSPORT – PART 1: PHYSICAL CHARACTERISTICS 14 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2395 MS 1901: PART 8:2006 MALAYSIAN ELECTRONIC PASSPORT - PART 8: TEST METHODS 10 RM 15.00
2396 MS 1901: PART 6:2006 MALAYSIAN ELECTRONIC PASSPORT – PART 6: BIOMETRICS 29 RM 45.00
2397 MS 1901: PART 4:2006 MALAYSIAN ELECTRONIC PASSPORT - PART 4: TRANSMISSION PROTOCOL 11 RM 15.00
MALAYSIAN ELECTRONIC PASSPORT - PART 2: RADIO FREQUENCY POWER AND
2398 MS 1901: PART 2:2006 12 RM 15.00
SIGNAL INTERFACE
2399 MS 1901: PART 3:2006 MALAYSIAN ELECTRONIC PASSPORT –PART 3: INITIALISATION 17 RM 30.00
2400 MS 1902:2006 (CONFIRMED:2015) Broadband over powerline (BPL) physical network layer 24 RM 30.00
2403 MS 1905:2006 PLASTICS CONTAINERS FOR PAINTS AND SURFACE COATINGS – SPECIFICATION 33 RM 45.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2416 MS 1917:2006 (CONFIRMED:2015) Furniture - Educational institutions - Specification for canteen furniture 17 RM 30.00
SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND
2417 MS 1918-1:2011 98 RM 150.00
INSTALLATION (FIRST REVISION)
Ductile iron pipes, fittings, accessories and their joints for water pipelines -
2418 MS 1919:2013 100 RM 150.00
Requirements and test method (First revision)
ENGINE COOLANT - ETHYLENE GLYCOL BASE FOR AUTOMOBILE AND LIGHT
2419 MS 1920:2006 13 RM 15.00
DUTY SERVICE - SPECIFICATION
TREATMENT OF ROOF, CEILING AND TIMBER ROOF COMPONENTS WITH
2420 MS 1921:2006 COPPER-CHROME-ARSENIC PRESERVATIVES FOR INDOOR ABOVE-GROUND USE 25 RM 30.00
- SPECIFICATION
2421 MS 1922:2006 TEST METHOD FOR pH OF ENGINE COOLANTS AND ANTIRUSTS 12 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2437 MS 1928:2007 POLYACRYLAMIDES FOR USE IN POTABLE WATER SUPPLY – SPECIFICATION 29 RM 45.00
2438 MS 1929:2007 POLYAMINES FOR USE IN POTABLE WATER SUPPLY – SPECIFICATION 29 RM 45.00
POLY(DIALLYLDIMETHYLAMMONIUM CHLORIDE) OR POLYDADMAC FOR USE IN
2439 MS 1930:2007 28 RM 45.00
POTABLE WATER SUPPLY – SPECIFICATION
PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN
2440 MS 1931:2007 17 RM 30.00
CONSUMPTION – EXPANDED ALUMINOSILICATE
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS 1933-5:2007 Methods of test for masonry units - Part 5: Determination of the active soluble
2446 19 RM 30.00
(CONFIRMED:2015) salts content of clay masonry units
Methods of test for masonry units - Part 9: Determination of volume and
MS 1933-9:2007
2447 percentage of voids and net volume of clay and calcium silicate masonry units 11 RM 15.00
(CONFIRMED:2015) by sand filling
MS 1933-15:2007 Methods of test for masonry units - Part 15: Determination of dimensions of
2448 14 RM 15.00
(CONFIRMED:2015) water vapour permeability of autoclaved aerated concrete masonry units
MS 1933-4:2007 Methods of test for masonry units - Part 4: Determination of real and bulk
2449 12 RM 15.00
(CONFIRMED:2015) density and of total and open porosity for natural stone masonry units
Methods of test for masonry units - Part 11: Determination of water absorption
of aggregate concrete, autoclaved aerated concrete, manufactured stone and
2450 MS 1933-11:2017 16 RM 30.00
natural stone masonry units due to capillary action and the initial rate of water
absorption of clay masonry units (First revision)
METHODS OF TEST FOR MASONRY UNIT - PART 11: DETERMINATION OF WATER
ABSORPTION OF AGGREGATE CONCRETE, MANUFACTURED STONE AND
2451 MS 1933: PART 11:2007 16 RM 30.00
NATURAL STONE MASONRY UNITS DUE TO CAPILLARY ACTION AND THE INITIAL
RATE OF WATER ABSORPTION OF CLAY MASONRY UNITS
METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF
2452 MS 1933: PART 1:2007 17 RM 30.00
COMPRESSIVE STRENGTH
METHODS OF TEST FOR MASONRY UNITS - PART 16: DETERMINATION OF
2453 MS 1933: PART 16:2007 18 RM 30.00
DIMENSIONS
MS 1933-14:2007 Methods of test for masonry units - Part 14: Determination of moisture
2454 17 RM 30.00
(CONFIRMED:2015) movement of aggregate concrete and manufactured stone masonry units
MS 1933-20:2007 Methods of test for masonry unit - Part 20: Determination of flatness of faces of
2455 13 RM 15.00
(CONFIRMED:2015) masonry units
MS 1933-10:2007 Methods of test for masonry units - Part 10: Determination of moisture content
2456 10 RM 15.00
(CONFIRMED:2015) of calcium silicate and autoclaved aerated concrete units
MS 1933-7:2007 Methods of test for masonry units - Part 7: Determination of water absorption
2457 10 RM 15.00
(CONFIRMED:2015) of clay masonry damp proof course units by boiling in water
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS 1933-19:2007 Methods test for masonry units - Part 19: Determination of moisture expansion
2458 16 RM 30.00
(CONFIRMED:2015) of large horizontally perforated clay masonry units
MS 1933-3:2007 Methods of test for masonry units - Part 3: Determination of net volume and
2459 11 RM 15.00
(CONFIRMED:2015) percentage age of voids of clay masonry units by hydrostatic weighing
Methods of test for masonry units - Part 16: Determination of dimensions (First
2460 MS 1933-16:2017 18 RM 30.00
revision)
MS 1934-1:2007
2461 Methods of test for masonry - Part 1: Determination of compressive strength 14 RM 15.00
(CONFIRMED:2014)
METHODS OF TEST FOR MASONRY PART 4: DETERMINATION OF SHEAR
2462 MS 1934: PART 4:2007 17 RM 30.00
STRENGTH INCLUDING DAMP PROOF COURSE
METHODS OF TEST FOR MASONRY - PART 3: DETERMINATION OF INITIAL
2463 MS 1934: PART 3:2007 19 RM 30.00
SHEAR STRENGTH
METHODS OF TEST FOR MASONRY PART 2: DETERMINATION OF FLEXURAL
2464 MS 1934: PART 2:2007 16 RM 30.00
STRENGTH
METHODS OF TEST FOR MASONRY PART 1: DETERMINATION OF COMPRESSIVE
2465 MS 1934: PART 1:2007 13 RM 15.00
STRENGTH
Masonry and masonry products - Methods for determining thermal properties
2466 MS 1935:2017 82 RM 120.00
(First revision)
MASONRY AND MASONRY PRODUCTS METHODS FOR DETERMINING DESIGN
2467 MS 1935:2007 70 RM 105.00
THERMAL VALUES
2468 MS 1936:2016 Electrical installations of buildings - Guide to MS IEC 60364 (First revision) 101 RM 150.00
2471 MS 1938:2007 (CONFIRMED:2015) Geographic information - Imagery and gridded data 51 RM 75.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2480 MS 1948:2007 (CONFIRMED:2015) Sterile urethral catheters for single use 21 RM 30.00
2481 MS 1949:2007 (CONFIRMED:2015) Sterile drainage catheters and accessory devices for single use 13 RM 15.00
Catheters other than intravascular catheters - Test methods for common
2482 MS 1950:2007 (CONFIRMED:2015) 13 RM 15.00
properties
2483 MS 1952:2007 PERSONAL EYE PROTECTION - SUNGLARE FILTERS FOR INDUSTRIAL USE 20 RM 30.00
PERSONAL PROTECTION - EQUIPMENT FOR EYE AND FACE PROTECTION
2484 MS 1953:2007 15 RM 15.00
DURING WELDING AND ALLIED PROCESSES
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2486 MS 1956:2007 PERSONAL EYE-PROTECTION - NON-OPTICAL TEST METHODS (FIRST REVISION) 37 RM 60.00
PERSONAL EYE-PROTECTION - FILTERS FOR WELDING AND RELATED
2487 MS 1957:2007 TECHNIQUES - TRANSMITTANCE REQUIREMENTS AND RECOMMENDED USE 21 RM 30.00
(FIRST REVISION)
PERSONAL EYE-PROTECTION - ULTRAVIOLET FILTERS - TRANSMITTANCE
2488 MS 1958:2007 18 RM 30.00
REQUIREMENTS AND RECOMMENDED USE (FIRST REVISION)
PERSONAL EYE-PROTECTION - INFRARED FILTERS - TRANSMITTANCE
2489 MS 1959:2007 17 RM 30.00
REQUIREMENTS AND RECOMMENDED USE (FIRST REVISION)
Government Multipurpose Card - Part 2: Data format for National ID application
2490 MS 1960-2:2015 12 RM 15.00
- Code of practice (First revision)
Government Multipurpose Card - Part 1: General characteristics - Code of
2491 MS 1960-1:2015 17 RM 30.00
practice (First revision)
MULTIPURPOSE SMART CARD - PART 2: DATA FORMAT FOR NATIONAL ID
2492 MS 1960: PART 2:2007 15 RM 15.00
APPLICATION - CODE OF PRACTICE
MULTIPURPOSE SMART CARD - PART 1: GENERAL CHARACTERISTICS - CODE OF
2493 MS 1960: PART 1:2007 18 RM 30.00
PRACTICE
Medical devices - Quality management systems - Guidance on the application
2494 MS 1961:2007 (CONFIRMED:2013) 111 RM 165.00
of MS ISO 13485:2003
2495 MS 1963:2007 (CONFIRMED:2015) Air quality - determination of odour concentration by dynamic olfactometry 84 RM 120.00
INVESTMENT CASTINGS (STEEL, NICKEL ALLOYS AND COBALT ALLOYS) -
2496 MS 1964:2007 19 RM 30.00
GENERAL TECHNICAL REQUIREMENTS (ISO 16468:2005, MOD)
COMMERCIAL GAS COOKING APPLIANCES FOR USE WITH LIQUEFIED
2497 MS 1966:2007 118 RM 165.00
PETROLEUM GASES
2498 MS 1967:2007 AUSTENITIC MANGANESE STEEL CASTINGS (ISO 13521:1999, MOD) 9 RM 15.00
NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF AQUEOUS
2499 MS 1968:2007 (CONFIRMED:2011) LIQUIDS INCLUDING WATER FOR HUMAN CONSUMPTION – TECHNICAL 65 RM 90.00
DELIVERY CONDITIONS
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
JOINTS FOR THE CONNECTION OF STEEL TUBES AND FITTINGS FOR THE
2500 MS 1969:2007 (CONFIRMED:2011) 32 RM 45.00
CONVEYANCE WATER AND OTHER AQUEOUS LIQUIDS - SPECIFICATION
2510 MS 1979:2015 Electrical installations of buildings - Code of practice (First revision) 44 RM 60.00
2512 MS 1979:2011 (BM) PEMASANGAN ELEKTRIK DALAM BANGUNAN - KOD AMALAN 24 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2556 MS EN 1991-1-4:2017 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions 152 RM 225.00
2564 MS EN 1993-1-8:2017 Eurocode 3: Design of steel structures - Part 1-8: Design of joints 141 RM 210.00
2565 MS EN 1993-5:2017 Eurocode 3: Design of steel structures - Part 5: Piling 100 RM 150.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS EN 1997-2:2016 (NATIONAL Malaysia National Annex to Eurocode 7: Geotechnical design - Part 2: Ground
2569 21 RM 30.00
ANNEX) investigation and testing
MS EN 1997-1:2012 (NATIONAL Malaysia National Annex to Eurocode 7: Geotechnical designs - Part 1: General
2570 29 RM 45.00
ANNEX) rules
2571 MS EN 1997-2:2015 Eurocode 7: Geotechnical design - Part 2: Ground investigation and testing 202 RM 300.00
2572 MS EN 1997-1:2012 Eurocode 7: Geotechnical design - Part 1: General rules 173 RM 255.00
2573 MS 1998:2017 Good aquaculture practice (GAqP) - Aquaculture farm (First revision) 15 RM 15.00
Eurocode 8: Design of structures for earthquake resistance - Part 1: General
2574 MS EN 1998-1:2015 237 RM 345.00
rules, seismic actions and rules for buildings
GOOD AQUACULTURE PRACTICE (GAqP) – AQUACULTURE FARM – GENERAL
2575 MS 1998:2007 12 RM 15.00
GUIDELINES
MS EN 1998-1:2015 (NATIONAL Malaysia National Annex to Eurocode 8: Design of structures for earthquake
2576 39 RM 60.00
ANNEX:2017) resistance - Part 1: General rules, seismic actions and rules for buildings
SURFACE ACTIVE AGENTS - DETERMINATION OF FOAMING POWER -
2577 MS 1999:2007 19 RM 30.00
PERFORATED DISC BEATING METHOD
TEST METHOD FOR WATER VAPOR TRANSMISSION RATE THROUGH PLASTICS
2578 MS 2000:2005 12 RM 15.00
FILM AND SHEETING USING A MODULATED INFRARED SENSOR
2579 MS 2001:2005 (CONFIRMED:2012) Test method for peel cling of stretch wrap film 16 RM 30.00
ROAD VEHICLES – LOCATION OF HAND CONTROLS, INDICATORS AND TELL-
2580 MS 2002:2005 17 RM 30.00
TALES IN MOTOR VEHICLES (ISO 4040:2001, MOD)
TEST METHOD FOR OXIDATION STABILITY OF STEAM TURBINE OILS BY
2581 MS 2004:2006 19 RM 30.00
ROTATING PRESSURE VESSEL
SURFACE ACTIVE AGENTS - FOAMING POWER AND ANTIFOAMING POWER -
2582 MS 2006:2007 20 RM 30.00
TURBINE STIRRING METHOD
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2586 MS 2009:2006 TEST METHOD FOR POUR POINT OF PETROLEUM PRODUCTS (FIRST REVISION) 16 RM 30.00
Test method for ASTM color of petroleum products (ASTM color scale) (First
2587 MS 2010:2012 16 RM 30.00
Revision)
Test method for acid number of petroleum products by potentiometric titration
2588 MS 2011:2012 25 RM 30.00
(First revision)
Test method for vapor pressure of petroleum products (Reid method) (Third
2589 MS 2012:2012 18 RM 30.00
revision)
TEST METHOD FOR VAPOR PRESSURE OF PETROLEUM PRODUCTS (REID
2590 MS 2012:2006 22 RM 30.00
METHOD) (SECOND REVISION)
2591 MS 2013:2012 Test method for ash from petroleum products (Third Revision) 13 RM 15.00
PESTICIDES AND OTHER AGROCHEMICALS - COMMON NAMES (ISO 1750:1981
2592 MS 2014:2006 AND ITS AMENDMENT 1:1982,ADDENDUM 1:1983, ADDENDUM 2:1983, 209 RM 300.00
AMENDMENT 2:1999, AMENDMENT 3:2001, MOD)
2593 MS 2015-1:2017 Public toilets - Part 1: Design criteria (First revision) 77 RM 120.00
2594 MS 2015: PART 4:2006 PUBLIC TOILETS - PART 4: CODE OF PRACTICE FOR MAINTENANCE 12 RM 15.00
2595 MS 2015: PART 1:2006 PUBLIC TOILETS - PART 1: MINIMUM DESIGN CRITERIA 84 RM 120.00
2596 MS 2015: PART 3:2006 PUBLIC TOILETS - PART 3: RATING CRITERIA 27 RM 45.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2597 MS 2015: PART 2:2006 PUBLIC TOILETS - PART 2: INSPECTION CRITERIA 46 RM 75.00
2598 MS 2016:2006 ROAD VEHICLES - FUEL TANK - PREVENTION OF FIRE RISKS 23 RM 30.00
TEST METHOD FOR DETERMINATION OF YIELD STRESS AND APPARENT
2599 MS 2017:2006 18 RM 30.00
VISCOSITY OF ENGINE OILS AT LOW TEMPERATURE
TEST METHOD FOR MEASURING VISCOSITY AT HIGH SHEAR RATE AND HIGH
2600 MS 2018:2006 15 RM 15.00
TEMPERATURE BY TAPERED BEARING SIMULATOR
2601 MS 2019:2006 (CONFIRMED:2015) Standard sizing systems for clothes (ISO/TR 10652:1991, IDT) 33 RM 45.00
MS ISO/IEC 2022:1993 Information processing - ISO 7-bit and 8-bit coded character sets - Code
2602 63 RM 90.00
(CONFIRMED:2015) extension techniques
FURNITURE - INCLUSION OF GLASS IN THE CONSTRUCTION OF TABLES OR
2603 MS 2022:2006 11 RM 15.00
TROLLEYS - SPECIFICATION
ELECTRIC RICE COOKER FOR HOUSEHOLD USE - METHOD OF MEASURING THE
2604 MS 2024:2006 (CONFIRMED:2011) 14 RM 15.00
PERFORMANCE
Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and
2605 MS 2025-2:2018 14 RM 15.00
dimensions (First revision)
Cold formed sheet piling of non alloy steels - Part 1: Technical delivery
2606 MS 2025-1:2018 27 RM 45.00
conditions (First revision)
COLD FORMED SHEET PILING OF NON ALLOY STEELS – PART 1: TECHNICAL
2607 MS 2025: PART 1:2006 22 RM 30.00
DELIVERY
COLD FORMED SHEET PILING OF NON-ALLOY STEELS - PART 2: TOLERANCES ON
2608 MS 2025: PART 2:2006 13 RM 15.00
SHAPE AND DIMENSIONS
2609 MS 2027:2018 Good animal husbandry practice (GAHP) (First revision) 21 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2611 MS 2028:2006 PACKAGING – WET CARGO – GUIDELINES FOR CARRIAGE ON AIR TRANSPORT 39 RM 60.00
TEST METHOD FOR DETERMINATION OF HOMOGENEITY AND MISCIBILITY IN
2612 MS 2029:2006 12 RM 15.00
AUTOMOTIVE ENGINE OILS
TEST METHOD FOR LOW TEMPERATURE, LOW SHEAR RATE,
2613 MS 2030:2006 VISCOSITY/TEMPERATURE DEPENDENCE OF LUBRICATING OILS USING A 24 RM 30.00
TEMPERATURE-SCANNING TECHNIQUE
TEST METHOD FOR EVAPORATION LOSS OF LUBRICATING OILS BY THE NOACK
2614 MS 2031:2006 35 RM 45.00
METHOD
TEST METHOD FOR EVALUATION OF RUST PREVENTIVE CHARACTERISTICS OF
2615 MS 2032:2006 28 RM 45.00
AUTOMOTIVE ENGINE OILS
TEST METHOD FOR ESTIMATION OF ENGINE OIL VOLATILITY BY CAPILLARY GAS
2616 MS 2033:2006 19 RM 30.00
CHROMATOGRAPHY
Information processing - Coding of machine readable characters (MICR and
2617 MS ISO 2033:2012 19 RM 30.00
OCR) (ISO 2033:1983, IDT)
TEST METHOD FOR MEASURING THE EFFECT ON FILTERABILITY OF ENGINE OILS
2618 MS 2034:2006 AFTER TREATMENT WITH VARIOUS AMOUNTS OF WATER AND A LONG (6-h) 13 RM 15.00
HEATING TIME
TEST METHOD FOR EVALUATION OF AUTOMOTIVE ENGINE OILS IN THE
2619 MS 2035:2006 52 RM 75.00
SEQUENCE VIII SPARK- IGNITION ENGINE (CLR OIL TEST ENGINE)
TEST METHOD FOR DETERMINATION OF ADDITIVE ELEMENTS IN LUBRICATING
2620 MS 2036:2006 15 RM 15.00
OILS BY INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY
WATER QUALITY - DETERMINATION OF TOTAL SUSPENDED SOLIDS BY
2621 MS 2037:2006 12 RM 15.00
FILTRATION THROUGH GLASS-FIBRE FILTERS
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 2039-1:2004 Plastics - Determination of hardness - Part 1: Ball indentation method (ISO
2625 18 RM 30.00
(CONFIRMED:2012) 2039-1:2001, IDT)
Aluminium and aluminium alloys - Sheets and coiled sheets - Specification (First
2626 MS 2040:2017 79 RM 120.00
revision)
ALUMINIUM AND ALUMINIUM ALLOYS - SHEETS AND COILED SHEETS -
2627 MS 2040:2007 60 RM 90.00
SPECIFICATION
2635 MS 2046:2008 (CONFIRMED:2013) Road vehicles - Brake linings frictions materials - Visual inspection 41 RM 60.00
PRACTICE FOR DETERMINATION OF MONOMERIC PLASTICIZERS IN POLY(VINYL
2636 MS 2047:2007 11 RM 15.00
CHLORIDE) (PVC) BY GAS CHROMATOGRAPHY)
TEST METHOD FOR PURITY OF MONOMERIC PLASTICIZERS BY GAS
2637 MS 2048:2007 12 RM 15.00
CHROMATOGRAPHY
TEST METHOD FOR RESIDUAL VINYL CHLORIDE MONOMER IN POLY (VINYL
2638 MS 2049:2007 12 RM 15.00
CHLORIDE) RESINS BY GAS CHROMATOGRAPHIC HEADSPACE TECHNIQUE
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2653 MS 2064:2008 TEST METHOD FOR DRYNESS OF PROPANE (VALVE FREEZE METHOD) 8 RM 15.00
TEST METHOD FOR DENSITY OR RELATIVE DENSITY OF LIGHT HYDROCARBONS
2654 MS 2065:2008 13 RM 15.00
BY PRESSURE HYDROMETER
TEST METHOD FOR DETERMINATION OF TOTAL VOLATILE SULFUR IN GASEOUS
2655 MS 2066:2008 HYDROCARBONS AND LIQUEFIED PETROLEUM GASES BY ULTRAVIOLET 21 RM 30.00
FLUORESCENCE
TEST METHOD FOR VAPOR PRESSURE OF LIQUEFIED PETROLEUM GASES (LPG)
2656 MS 2067:2008 15 RM 15.00
(EXPANSION METHOD)
2657 MS 2068:2008 TEST METHOD FOR RESIDUES IN LIQUEFIED PETROLEUM (LP) GASES 15 RM 15.00
PRACTICE FOR DETERMINATION OF VOLATILES IN POLYMERS BY STATIC
2658 MS 2069:2008 12 RM 15.00
HEADSPACE GAS CHROMATOGRAPHY
MS 2070-2:2008 Scheduled waste - sampling technical guide - Part 2: Description of media and
2659 15 RM 15.00
(CONFIRMED:2015) device selection guide
2660 MS 2071:2008 PRACTICE FOR OBTAINING LPG SAMPLES USING A FLOATING PISTON CYLINDER 16 RM 30.00
2661 MS 2072:2008 (CONFIRMED:2015) Guidelines for developing and implementing early action for site remediation 22 RM 30.00
ECO-LABELLING CRITERIA FOR ENVIRONMENTALLY DEGRADABLE PLASTICS
2662 MS 2073:2008 13 RM 15.00
PACKAGING MATERIAL
2663 MS 2074:2008 (CONFIRMED:2015) Practice for sampling using a trier sampler 11 RM 15.00
2664 MS 2075:2008 (CONFIRMED:2015) Practice for sampling with a composite liquid waste sampler (COLIWASA) 12 RM 15.00
2666 MS 2077:2008 (CONFIRMED:2015) Practice for sampling with a dipper or pond sampler 11 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2668 MS 2079:2008 (CONFIRMED:2015) Practices for decontamination of field equipment used at waste sites 15 RM 15.00
2670 MS 2082:2008 (CONFIRMED:2013) Road vehicles - Braking systems - Temperature measuring methods 19 RM 30.00
ADHESIVES - WOOD-TO-WOOD ADHESIVE BONDS - DETERMINATION OF SHEAR
2671 MS 2083:2008 16 RM 30.00
STRENGTH BY TENSILE LOADING (ISO 6237:2003, MOD)
ADHESIVES - WOOD-TO-WOOD ADHESIVE BONDS - DETERMINATION OF SHEAR
2672 MS 2084:2008 17 RM 30.00
STRENGTH BY COMPRESSIVE LOADING (ISO 6238:2001, MOD)
DOMESTIC AND SIMILAR ELECTRONIC EQUIPMENT INTERCONNECTION
2673 MS 2085:2008 24 RM 30.00
REQUIREMENTS - PERITELEVISION CONNECTOR
Plastic tubings and hoses for use with commercial propane, commercial butane
2674 MS 2086:2008 (CONFIRMED:2013) and their mixtures in the vapour phase -Requirements for plastic tubings and 19 RM 30.00
hoses
PLASTIC TUBINGS AND HOSES FOR USE WITH COMMERCIAL PROPANE,
2675 MS 2086:2008, AMD. 1: 2009 COMMERCIAL BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE - FREE 4 RM -
REQUIREMENTS FOR PLASTIC TUBINGS AND HOSES
TEST METHOD FOR SUSCEPTIBILITY OF POLYETHYLENE BOTTLES TO SOOT
2676 MS 2088:2008 12 RM 15.00
ACCUMULATION
PLASTICS PIPING SYSTEMS - THERMOPLASTICS PIPING SYSTEMS FOR BURIED
2677 MS 2089:2008 NON-PRESSURE APPLICATIONS - TEST METHODS FOR LEAKTIGHTNESS OF 14 RM 15.00
ELASTOMERIC SEALING RING TYPE JOINTS
THERMOPLASTICS PIPING SYSTEMS - END-LOAD-BEARING JOINTS BETWEEN
2678 MS 2090:2008 SMALL DIAMETER PRESSURE PIPES AND FITTINGS - TEST METHOD FOR 10 RM 15.00
LEAKTIGHTNESS UNDER INTERNAL WATER PRESSURE, INCLUDING END THRUST
SPECIFICATION FOR CAUTIONARY LABELLING FOR FIVE-GALLON OPEN-HEAD
2679 MS 2091:2008 9 RM 15.00
PLASTICS CONTAINERS
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2693 MS 2098:2008 AUSTENITIC CAST IRONS - CLASSIFICATION (ISO 2892:2007, MOD) 34 RM 45.00
OIL PALM CLONES FOR COMMERCIAL PLANTING - SPECIFICATION FOR ORTET
2694 MS 2099:2008 13 RM 15.00
SELECTION
Electric cable and wire: 600/1 000 (um = 1 200) v single core pvc insulated cable
2695 MS 2100:2007 (CONFIRMED:2014) 15 RM 15.00
- Non-armoured
Electrical cable and wire: 600/1 000 (Um = 1 200) V single core pvc insulated
2696 MS 2101:2007 (CONFIRMED:2014) 15 RM 15.00
cable - Armoured
Electric cable and wire: 600/1 000 (Um = 1 200) V multi core PVC insulated
2697 MS 2102:2007, AMD. 1:2015 FREE 7 RM -
cable - Non armoured AMENDMENT 1
Electric cable and wire: 600/1 000 (Um = 1 200) V multi core PVC insulated
2698 MS 2102:2007 (CONFIRMED:2014) 20 RM 30.00
cable - Non armoured
Electric cable and wire: 600/1 000 (Um = 1 200) V multi core PVC insulated
2699 MS 2103:2007, AMD. 1:2015 FREE 2 RM -
cable - Armoured AMENDMENT 1
Electric cable and wire: 600/1 000 (Um = 1 200) V multi core PVC insulated
2700 MS 2103:2007 (CONFIRMED:2014) 20 RM 30.00
cable - Armoured
Electric cable and wire: 600/1 000 (Um = 1 200) V single core XLPE insulated
2701 MS 2104:2007 (CONFIRMED:2014) 16 RM 30.00
cable - Non-armoured
Electric cable and wire: 600/1 000 (Um = 1 200) V single core XLPE insulated
2702 MS 2105:2007 (CONFIRMED:2014) 17 RM 30.00
cable - Armoured
Electric cable and wire: 600/1 000 (Um = 1 200) V multi core XLPE insulated
2703 MS 2106:2007 (CONFIRMED:2014) 20 RM 30.00
cable - Non-armoured
Electric cable and wire: 600/1 000 (Um = 1 200) V multi core XLPE insulated
2704 MS 2107:2007 (CONFIRMED:2014) 22 RM 30.00
cable - Armoured
Electric cable and wire: 6.35/11 (12) kV single core XLPE insulated cable - Non-
2705 MS 2108:2007 (CONFIRMED:2014) 18 RM 30.00
armoured
Electric cable and wire: 6.35/11 (12) kV single core XLPE insulated cable -
2706 MS 2109:2007 (CONFIRMED:2013) 18 RM 30.00
Armoured
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Electric cable and wire: 19/33 (36) kV single core XLPE insulated cable - Non-
2707 MS 2110:2007 (CONFIRMED:2014) 18 RM 30.00
armoured
MS 2111:2007 Electric cable and wire: 19/33 (36) kV single core XLPE insulated cable -
2708 13 RM 15.00
(CONFIRMED:2014) Armoured
Electric cable and wire - Polyvinyl chloride (PVC) insulated cables of rated
2709 MS 2112-5:2009, AMD. 1:2017 FREE 8 RM -
voltages up to and including 450/750 V - Part 5: Flexible cables AMENDMENT 1
Electric cable and wire - Polyvinyl chloride (PVC) insulated cables of rated
2710 MS 2112-2:2009, AMD. 1:2015 FREE 3 RM -
voltages up to and including 450/750 V - Part 2: Test methods AMENDMENT 1
ELECTRIC CABLE AND WIRE - POLYVINYL CHLORIDE (PVC) INSULATED CABLES OF
2711 MS 2112-2:2009 17 RM 30.00
RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 2: TEST METHODS
ELECTRIC CABLE AND WIRE - POLYVINYL CHLORIDE (PVC) INSULATED CABLES OF
2712 MS 2112-3:2009 RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 3: NON-SHEATHED 28 RM 45.00
CABLES FOR FIXED WIRING
ELECTRIC CABLE AND WIRE - POLYVINYL CHLORIDE (PVC) INSULATED CABLES OF
2713 MS 2112-4:2009 RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 4: SHEATHED 12 RM 15.00
CABLES FOR FIXED WIRING
ELECTRIC CABLE AND WIRE - POLYVINYL CHLORIDE (PVC) INSULATED CABLES OF
2714 MS 2112-1:2009 RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 1: GENERAL 21 RM 30.00
REQUIREMENTS
ELECTRIC CABLE AND WIRE - POLYVINYL CHLORIDE (PVC) INSULATED CABLES OF
2715 MS 2112-6:2009 RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 6: CABLES FOR LIFT 23 RM 30.00
AND FLEXIBLE CONNECTIONS
ELECTRIC CABLE AND WIRE - POLYVINYL CHLORIDE (PVC) INSULATED CABLES OF
2716 MS 2112-5:2009 30 RM 45.00
RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 5: FLEXIBLE CABLES
Electric cable and wire - Polyvinyl chloride (PVC) insulated cables of rated
2717 MS 2112-3:2009, AMD.1:2015 voltages up to and including 450/750 V - Part 3: Nonsheathed cables for fixed FREE RM -
wiring AMENDMENT 1
Electric cable and wire - Polyvinyl chloride (PVC) insulated cables of rated
2718 MS 2112-6:2009, AMD. 1:2015 voltages up to and including 450/750 V - Part 6: Cables for lift and flexible RM -
connections AMENDMENT 1
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Electric cable and wire - Polyvinyl chloride (PVC) insulated cables of rated
2719 MS 2112-1:2009, AMD.1:2015 voltages up to and including 450/750 V - Part 1: General requirements 8 RM -
AMENDMENT 1
Electric cable and wire - Polyvinyl chloride (PVC) insulated cables of rated
2720 MS 2112-4:2009, AMD. 1:2015 voltages up to and including 450/750 v - Part 4: Sheathed cables for fixed wiring 2 RM -
AMENDMENT 1
ELECTRIC CABLE: 12.7/22 (24) kV SINGLE CORE XLPE INSULATED CABLE - NON-
2721 MS 2113:2011 17 RM 30.00
ARMOURED
ELECTRIC CABLE: 12.7/22 (24) kV SINGLE CORE XLPE INSULATED CABLE -
2722 MS 2114:2011 17 RM 30.00
ARMOURED
ELECTRIC CABLE : 6.35/11 (12) kV THREE CORE XLPE INSULATED CABLE - NON-
2723 MS 2115:2011 17 RM 30.00
ARMOURED
ELECTRIC CABLE: 6.35/11 (12) kV THREE CORE XLPE INSULATED CABLE -
2724 MS 2116:2011 18 RM 30.00
ARMOURED
ELECTRIC CABLE: 12.7/22 (24) kV THREE CORE XLPE INSULATED CABLE - NON-
2725 MS 2117:2011 17 RM 30.00
ARMOURED
ELECTRIC CABLE: 12.7/22 (24) kV THREE CORE XLPE INSULATED CABLE -
2726 MS 2118:2011 18 RM 30.00
ARMOURED
ELECTRIC CABLE: 19/33 (36) kV THREE CORE XLPE INSULATED CABLE - NON-
2727 MS 2119:2011 17 RM 30.00
ARMOURED
ELECTRIC CABLE: 19/33 (36) kV THREE CORE XLPE INSULATED CABLE -
2728 MS 2120:2011 18 RM 30.00
ARMOURED
LIQUID CHLORINE FOR INDUSTRIAL USE – DETERMINATION OF THE CONTENT
2729 MS ISO 2120:2003 13 RM 15.00
OF CHLORINE BY VOLUME IN THE VAPORIZED PRODUCT(ISO 2120:1972, IDT)
LIQUID CHLORINE FOR INDUSTRIAL USE – DETERMINATION OF WATER
2730 MS ISO 2121 : 2003 13 RM 15.00
CONTENT – GRAVIMETRIC METHOD (ISO 2121:1972, IDT)
2731 MS 2121:2012 Telecommunication cable: Plastic twin pair, triple and unit types, internal cable 20 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2745 MS 2128:2017 Electric cable - 6.35/11 (12) kV XLPE insulated aerial bundled cable 17 RM 30.00
2746 MS 2129:2017 Electric cable - 12.7/22 (24) kV XLPE insulated aerial bundled cable 17 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2747 MS 2130:2017 Electric cable - 19/33 (36) kV XLPE insulated aerial bundled cable 17 RM 30.00
Electric cable and wire - 600/1 000 (Um = 1 200) V polyethylene insulated aerial
2748 MS 2131:2017 16 RM 30.00
bundled cable
Telecommunication Cable: Single-mode optical fibre cable - Loose tube type for
2749 MS 2132:2017 22 RM 30.00
duct installation
Telecommunication cable - Single-mode optical fibre cable - Loose tube type for
2750 MS 2133:2017 23 RM 30.00
aerial installation
Telecommunication Cable - Single-mode optical fibre cable - Loose tube type
2751 MS 2134:2017 21 RM 30.00
for direct buried installation
PAPER, BOARD AND PULPS – DETERMINATION OF RESIDUE (ASH) ON IGNITION
2752 MS ISO 2144:1999 12 RM 15.00
AT 900°C (FIRST REVISION)(ISO 2144:1997, IDT)
CEREALS, PULSES AND DERIVED PRODUCTS - DETERMINATION OF ASH (ISO
2753 MS ISO 2171:1998 10 RM 15.00
2171:1980, IDT)
FRUIT JUICE - DETERMINATION OF SOLUBLE SOLIDS CONTENT- PYCNOMETRIC
2754 MS ISO 2172:2010 10 RM 15.00
METHOD (ISO 2172:1983, IDT)
FRUIT AND VEGETABLE PRODUCTS - DETERMINATION OF SOLUBLE SOLIDS -
2755 MS ISO 2173:2010 19 RM 30.00
REFRACTOMETRIC METHOD (ISO 2173:2003, IDT)
ISLAMIC CONSUMER GOODS - PART 1: COSMETIC AND PERSONAL CARE -
2756 MS 2200: PART 1:2008 16 RM 30.00
GENERAL GUIDELINES
BARANG GUNAAN ISLAM - BAHAGIAN 1: KOSMETIK DAN DANDANAN DIRI -
2757 MS 2200: BAHAGIAN 1:2008 15 RM 15.00
GARIS PANDUAN UMUM
Barang Gunaan Islam - Bahagian 2: Penggunaan Tulang, Kulit dan Bulu Haiwan -
2758 MS 2200-2:2012 (BM) 22 RM 30.00
Garis Panduan Umum
Islamic Consumer Goods - Part 2: Usage of animal bone, skin and hair - General
2759 MS 2200-2:2013 21 RM 30.00
guidelines
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2763 MS 2204:2008 CRANES - EQUIPMENT FOR LIFTING PERSONS - PART 1: SUSPENDED BASKETS 27 RM 45.00
2764 MS 2205:2008 HIGH STRENGTH STEEL CASTINGS FOR STRUCTURAL PURPOSES - SPECIFICATION 18 RM 30.00
2769 MS 2210:2009 LED ENHANCED ROAD PAVEMENT MARKERS (LED RPM) - SPECIFICATION 21 RM 30.00
PLASTICS FLEXIBLE PACKAGING MATERIALS FOR PACKING OF REFINED EDIBLE
2770 MS 2211:2009 19 RM 30.00
OILS AND FATS - SPECIFICATION
LIQUID CHEMICAL PRODUCTS - MEASUREMENT OF COLOUR IN HAZEN UNITS
2771 MS ISO 2211:2010 10 RM 15.00
(PLATINUM-COBALT SCALE) (ISO 2211:1973, IDT)
PRACTICE FOR PRODUCTION AND EVALUATION OF FIELD METALLOGRAPHIC
2772 MS 2212:2009 13 RM 15.00
REPLICAS
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2778 MS 2219:2009 GENERAL TESTING PROCEDURES FOR MEDICAL ELECTRICAL EQUIPMENT 164 RM 240.00
2779 MS 2220:2009 (CONFIRMED:2015) Practice for sampling consolidated solids in drums or similar containers 16 RM 30.00
2780 MS 2221:2009 (CONFIRMED:2015) Practices for sampling wastes from pipes and other point discharges 14 RM 15.00
Personal financial planning - requirements for personal financial planners (ISO
2781 MS 2222:2007 (CONFIRMED:2015) 37 RM 60.00
22222:2005, MOD)
INFORMATION AND DOCUMENTATION - RECORDS MANAGEMENT - PART 1:
2782 MS 2223-1:2009 28 RM 45.00
GENERAL (ISO 15489-1:2001, IDT)
INFORMATION AND DOCUMENTATION - RECORDS MANAGEMENT - PART 2:
2783 MS 2223-2:2009 58 RM 90.00
GUIDELINES
Maklumat dan pendokumenan - Pengurusan rekod - Bahagian 1: Am (ISO
2784 MS 2223-1:2015 (BM) 36 RM 60.00
15489-1:2001, IDT)
2785 MS 2223-2:2015 (BM) Maklumat dan pendokumenan - Pengurusan rekod - Bahagian 2: Garis panduan 60 RM 90.00
2787 MS 2226:2009 MAGNETIC RESONANCE IMAGING - CODE OF PRACTICE FOR SAFETY 77 RM 120.00
ULTRASOUND IN MEDICAL DIAGNOSTIC - CODE OF PRACTICE OF INSTALLATION,
2788 MS 2227:2009 19 RM 30.00
TESTING AND MAINTENANCE
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2801 MS 2236:2009 (CONFIRMED:2015) Speed hump - specification for materials, design and installation 19 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2810 MS 2242:2009, AMD 1:2010 AUTOMOBILE SUSPENSION SPRINGS - STRENGTH TEST METHODS FREE 1 RM -
2814 MS 2244:2009 (CONFIRMED:2015) Test method for moisture in cotton by oven-drying 15 RM 15.00
MS ISO 2244:2002 Packaging - Complete, filled transport packages and unit loads - Horizontal
2815 18 RM 30.00
(CONFIRMED:2012) impact tests (First revision) (ISO 2244:2000, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2816 MS 2247:2015 Carbon steels for machine structural use - Specification 24 RM 30.00
MS ISO 2247:2002 Packaging - Complete filled transport packages and unit loads - Vibration tests
2817 12 RM 15.00
(CONFIRMED:2012) at fixed low frequency (First revision) (ISO 2247:2000(E), IDT)
Generation of environmental data related to waste management activities -
2818 MS 2248:2009 (CONFIRMED:2015) 43 RM 60.00
quality assurance and quality control planning and implementation
MS ISO 2248:2005 Packaging - Complete, filled transport packages - Vertical impact test by
2819 10 RM 15.00
(CONFIRMED:2012) dropping (ISO 2248:1985, IDT)
2821 MS 2249:2017 Fresh baby corn (Zea mays L.) - Specification (First revision) 17 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2831 MS 2259:2018 Cold finished carbon and alloy steel bars - Specification 20 RM 30.00
2832 MS 2259:2009 (P) COLD FINISHED CARBON AND ALLOY STEEL BARS 17 RM 30.00
Medical devices - Guidance on the selection of standards in support of
2833 MS 2261:2009 (CONFIRMED:2015) 26 RM 45.00
recognised essential principles of safety and performance of medical devices
WATER QUALITY- DETERMINATION OF AMMONIACAL NITROGEN -
2834 MS 2263:2009 14 RM 15.00
DISTILLATION AND TITRATION METHOD (ISO 5664:1984, MOD)
FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) -
2835 MS 2264:2009 DETERMINATION OF SODIUM CONTENT BY ATOMIC ABSORPTION 15 RM 15.00
SPECTROMETRY
FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) -
2836 MS 2265:2009 DETERMINATION OF PHOSPHORUS CONTENT BY INDUCTIVELY COUPLED 15 RM 15.00
PLASMA (ICP) EMISSION SPECTROMETRY
FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) -
2837 MS 2266:2009 16 RM 30.00
DETERMINATION OF METHANOL CONTENT
FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) -
2838 MS 2267:2009 DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, 26 RM 45.00
TRIGLYCERIDE CONTENTS (REFERENCE METHOD)
FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) -
2839 MS 2268:2009 16 RM 30.00
DETERMINATION OF ACID VALUE
FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) -
2840 MS 2269:2009 19 RM 30.00
DETERMINATION OF ESTER AND LINOLENIC ACID METHYL ESTER CONTENTS
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2841 MS 2270:2009 TEST METHODS FOR LEAD IN GASOLINE BY X-RAY SPECTROSCOPY 12 RM 15.00
SURFACE ACTIVE AGENTS – DETERGENTS – DETERMINATION OF ANIONIC-
2842 MS ISO 2271:2003 ACTIVE MATTER BY MANUAL OR MECHANICAL DIRECT TWOPHASE TITRATION 13 RM 15.00
PROCEDURE (FIRST REVISION)(ISO 2271:1989, IDT)
TEST METHOD FOR SULFUR IN PETROLEUM AND PETROLEUM PRODUCTS BY
2843 MS 2271:2009 15 RM 15.00
ENERGY DISPERSIVE X-RAY FLOURESCENCE SPECTROMETRY
MS 2272-1:2010 Sterile hypodermic syringes for single use - Part 1: Syringes for manual use (ISO
2844 38 RM 60.00
(CONFIRMED:2015) 7886-1:1993, COR. 1:1995, MOD)
SURFACE ACTIVE AGENTS - SOAPS - DETERMINATION OF LOW CONTENTS OF
2845 MS ISO 2272:2007 FREE GLYCEROL BY MOLECULAR ABSORPTION SPECTROMETRY(ISO 2272:1989, 12 RM 15.00
IDT)
STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 2: SYRINGES FOR USE
2846 MS 2272-2:2010 23 RM 30.00
WITH POWER-DRIVEN SYRINGE PUMPS (ISO 7886-2:1996, IDT)
STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 4: SYRINGES WITH RE-
2847 MS 2272-4:2010 23 RM 30.00
USE PREVENTION FEATURE (ISO 7886-4:2006, MOD)
Good Animal Husbandry Practice - Edible-nest Swiftlet ranching and its
2848 MS 2273:2012 26 RM 45.00
premises (First revision)
FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) -
2849 MS 2274:2009 15 RM 15.00
DETERMINATION OF IODINE VALUE
DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER
2850 MS 2275:2009 28 RM 45.00
PLUGGING POINT
LIQUID PETROLEUM PRODUCTS - DETERMINATION OF CONTAMINATION IN
2851 MS 2276:2009 11 RM 15.00
MIDDLE DISTILLATES
MS 2277-2:2009 Welding and allied processes - Vocabulary - Part 2: Soldering and brazing
2852 37 RM 60.00
(CONFIRMED:2015) processes and related terms (ISO 857-2:2005, IDT)
MS 2277-1:2009 Welding and allied processes - Vocabulary - Part 1: Metal welding processes
2853 74 RM 105.00
(CONFIRMED:2015) (ISO 857-1:1998, MOD)
FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) -
2854 MS 2278:2009 21 RM 30.00
DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2863 MS 2282-1:2014 Masonry units - Specification - Part 1: Fired clay masonry units (First revision) 52 RM 75.00
2864 MS 2282-2:2014 Masonry units - Specification - Part 2: Calcium silicate masonry units 35 RM 45.00
METALLIC MATERIALS - FATIGUE TESTING - AXIAL FORCE-CONTROLLED
2865 MS 2283:2009 31 RM 45.00
METHOD (ISO 1099:2006, MOD)
Domestic furniture - Beds and mattresses - Safety requirements and test
2866 MS 2284:2010 (CONFIRMED:2015) 16 RM 30.00
methods
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSION SET
UNDER CONSTANT ELONGATION, AND OF TENSION SET, ELONGATION AND
2867 MS ISO 2285:2007 20 RM 30.00
CREEP UNDER CONSTANT TENSILE LOAD (SECOND REVISION) (ISO 2285: 2007,
IDT)
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S-
2868 MS 2285-2:2010 61 RM 90.00
CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2:
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
CRACKING-RESISTANT CARBON AND LOW ALLOY STEELS, AND THE USE OF CAST
IRONS (ISO 15156-2:2003, COR. 1:2005, MOD)
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S-
CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3:
2869 MS 2285-3:2010 102 RM 150.00
CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER
ALLOYS (ISO 15156-3:2003, COR. 1:2005, COR. 2:2005, MOD)
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S-
CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 1:
2870 MS 2285-1:2010 21 RM 30.00
GENERAL PRINCIPLES FOR SELECTION OF CRACKING-RESISTANT MATERIALS (ISO
15156-1:2001, COR. 1:2005, MOD)
Petroleum and natural gas industries - Materials for use in H2S-containing
2871 MS 2285-1:2018 environments in oil and gas production - Part 1: General principles for selection 20 RM 30.00
of cracking-resistant materials (First revision) (ISO 15156-1:2015, MOD)
PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATION -
2872 MS 2286-1:2010 POLYPROPYLENE (PP) - PART 1 : GENERAL (ISO 15874-1:2003, AMD.1:2007, 16 RM 30.00
MOD)
Plastics piping systems for hot and cold water installations - Polypropylene (PP)
2873 MS 2286-2:2012 34 RM 45.00
- Part 2: Pipes (ISO 15874-2:2003, AMD. 1:2007, MOD)
Plastics piping systems for hot and cold water installations - Polypropylene (PP)
2874 MS 2286-3:2012 25 RM 30.00
- Part 3 : Fittings (ISO 15874-3:2003, FDAM 1:2009, MOD)
Plastics piping systems for hot and cold water installations - Polypropylene (PP)
2875 MS 2286-7:2012 20 RM 30.00
- Part 7: Guidance for the assessment of conformity
Plastics piping systems for hot and cold water installations - polypropylene (PP)
2876 MS 2286-5:2012 8 RM 15.00
- Part 5: Fitness for purpose of the system (ISO 15874-5:2003, IDT)
INTERFACE DEVICE FOR MALAYSIA MULTIPURPOSE SMART CARD - PART 3:
2877 MS 2287-3:2010 13 RM 15.00
COMMUNICATION PROTOCOL
INTERFACE DEVICE FOR MALAYSIA MULTIPURPOSE SMART CARD - PART 1:
2878 MS 2287-1:2010 12 RM 15.00
PHYSICAL CHARACTERISTICS
INTERFACE DEVICE FOR MALAYSIA MULTIPURPOSE SMART CARD - PART 2:
2879 MS 2287-2:2010 15 RM 15.00
ELECTRICAL CHARACTERISTICS
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2888 MS 2294:2010 (CONFIRMED:2016) Commercial road vehicles - Advance-warning triangles - Requirements 27 RM 45.00
2889 MS 2295:2010 DENTISTRY - MEDICAL DEVICES FOR DENTISTRY - DENTAL IMPLANTS 17 RM 30.00
2892 MS 2298:2010 ROLLED CARBON STEEL FOR COLD - FINISHED STEEL BARS 14 RM 15.00
MS 2299-1:2010 Medical gloves for single use - Part 1: Requirements and testing for freedom
2893 12 RM 15.00
(CONFIRMED:2015) from holes
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MEDICAL GLOVES FOR SINGLE USE - PART 3: REQUIREMENTS AND TESTING FOR
2894 MS 2299-3:2010 41 RM 60.00
BIOLOGICAL EVALUATION
MEDICAL GLOVES FOR SINGLE USE - PART 2: REQUIREMENTS AND TESTING FOR
2895 MS 2299-2:2010 19 RM 30.00
PHYSICAL PROPERTIES
VALUE-BASED MANAGEMENT SYSTEMS - REQUIREMENTS FROM AN ISLAMIC
2896 MS 2300:2009 15 RM 15.00
PERSPECTIVE
TEST METHOD FOR DETERMINATION OF HYDROCARBONS IN LIQUEFIED
2897 MS 2301:2010 PETROLEUM (LP) GASES AND PROPANE/PROPENE MIXTURES BY GAS 24 RM 30.00
CHROMATOGRAPHY
Packaging, storage and transportation of fresh fruit and vegetable - Guidelines
2898 MS 2302:2016 23 RM 30.00
(First revision)
PACKAGING, STORAGE AND TRANSPORTATION OF FRESH TROPICAL FRUITS -
2899 MS 2302:2010 19 RM 30.00
GUIDELINES
2901 MS 2304:2010 (CONFIRMED:2015) Practice for managing scheduled wastes containers 17 RM 30.00
PRACTICE FOR SAMPLING UNCONSOLIDATED SOLIDS IN DRUMS OR SIMILAR
2902 MS 2305:2010 16 RM 30.00
CONTAINERS
PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - PART 2:
2903 MS 2307-2:2010 15 RM 15.00
GUIDED TYPE FALL ARRESTERS INCLUDING A FLEXIBLE ANCHOR LINE
PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - PART 1:
2904 MS 2307-1:2010 16 RM 30.00
GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE
PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT -
2905 MS 2308:2010 13 RM 15.00
LANYARDS (FIRST REVISION)
PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - ENERGY
2906 MS 2309:2010 14 RM 15.00
ABSORBERS (FIRST REVISION)
PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT -
2907 MS 2310:2010 13 RM 15.00
RETRACTABLE TYPE FALL ARRESTERS (FIRST REVISION)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2914 MS 2317:2018 Stainless steel - Chemical composition (First revision) (ISO 15510:2014, MOD) 71 RM 105.00
2916 MS 2318:2012 Demolition of buildings - Code of practice (First revision) 150 RM 210.00
2917 MS 2319:2010 SPECIFICATION FOR WIRE RODS FOR CORE WIRE COVERED ELECTRODE 11 RM 15.00
2919 MS 2321:2010 (CONFIRMED:2016) Road vehicles - Telescopic sock absorbers for suspension systems 63 RM 90.00
2920 MS ISO 2321:2012 Rubber threads - Methods of test (First revision) (ISO 2321:2006, IDT) 35 RM 45.00
FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL
2921 MS 2322:2010 19 RM 30.00
INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2952 MS 2356:2010 TEST METHOD FOR CLOUD POINT OF PETROLEUM PRODUCTS 11 RM 15.00
FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) -
2953 MS 2357:2010 DETERMINATION OF CA, K, MG AND NA CONTENT BY OPTICAL EMISSION 14 RM 15.00
SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) -
2954 MS 2358:2010 DETERMINATION OF POTASSIUM CONTENT BY ATOMIC ABSORPTION 16 RM 30.00
SPECTROMETRY
TEST METHOD FOR MEASURING THE COMPARATIVE BURNING
2955 MS 2359:2010 CHARACTERISTICS OF SOLID PLASTICS IN A VERTICAL POSITION (FIRST 17 RM 30.00
REVISION)
TEST METHOD FOR RATE OF BURNING AND/OR EXTENT AND TIME OF BURNING
2956 MS 2360:2010 17 RM 30.00
OF PLASTICS IN A HORIZONTAL POSITION (FIRST REVISION)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2962 MS 2367:2010 (CONFIRMED:2015) Performance evaluation of in vitro diagnostic medical devices 21 RM 30.00
MS 2368-1:2010 Wheelchairs - Part 1: Guidelines for the application of the MS ISO 7176 series
2963 91 RM 135.00
(CONFIRMED:2015) on wheelchairs
Communication aids for blind persons - Identifiers, names and assignation to
MS 2369-2:2010
2964 coded character sets for 8-dot braille characters - Part 2: Latin alphabet based 48 RM 75.00
(CONFIRMED:2015)
character sets
Communication aids for blind persons - Identifiers, names and assignation to
MS ISO 2369-1:2010
2965 coded character sets for 8-dot braille characters - Part 1: General guidelines for 29 RM 45.00
(CONFIRMED:2015)
braille identifiers and shift marks
Medical laboratories - Reduction of error through risk management and
2966 MS 2370:2010 (CONFIRMED:2015) 23 RM 30.00
continual improvement
WOOD PRESERVATIVES, TREATED WOOD AND TREATED PLYWOOD -
2967 MS 2371-1:2010 14 RM 15.00
QUANTITATIVE ANALYSIS FOR BORON - PART 1: TITRATION METHOD
WOOD PRESERVATIVES, TREATED WOOD AND TREATED PLYWOOD -
2968 MS 2371-3:2010 QUANTITATIVE ANALYSIS FOR BORON - PART 3: UV-VISIBLE 17 RM 30.00
SPECTROPHOTOMETER METHOD
WOOD PRESERVATIVES, TREATED WOOD AND TREATED PLYWOOD -
2969 MS 2371-2:2010 QUANTITATIVE ANALYSIS FOR BORON - PART 2: INDUCTIVE COUPLED PLASMA - 15 RM 15.00
ATOMIC EMMISSION SPECTROSCOPY (ICP-AES)
CARBON AND LOW-ALLOY STEEL FORGINGS, REQUIRING NOTCH TOUGHNESS
2970 MS 2372:2011 16 RM 30.00
TESTING FOR PIPING COMPONENTS - SPECIFICATION
PIPING FITTINGS OF WROUGHT CARBON STEEL FOR LOW-TEMPERATURE
2971 MS 2373:2011 14 RM 15.00
SERVICE - SPECIFICATION
PIPING FITTINGS OF WROUGHT CARBON STEEL AND ALLOY STEEL FOR
2972 MS 2374:2011 16 RM 30.00
MODERATE AND HIGH TEMPERATURE SERVICE - SPECIFICATION
MS ISO/IEC 2375:2009 Information technology - Procedure for registration of escape sequences and
2973 38 RM 60.00
(CONFIRMED:2015) coded character sets (First revision) (ISO/IEC 2375:2003, IDT)
2974 MS 2375:2011 CARBON STEEL FORGINGS FOR PIPING APPLICATIONS - SPECIFICATION 12 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
2992 MS 2393:2013 (BM) Islamic and halal principles - Definitions and interpretations on terminology 17 RM 30.00
Rubber test mixes - Preparation, mixing and vulcanization - Equipment and
2993 MS ISO 2393:2013 33 RM 45.00
procedures (First revision) (ISO 2393:2008, IDT)
2994 MS 2394-2:2011 BUILDING AND CIVIL ENGINEERING - VOCABULARY - PART 2: CONTRACT TERMS 29 RM 45.00
2995 MS 2394-1:2011 BUILDING AND CIVIL ENGINEERING - VOCABULARY - PART 1: GENERAL TERMS 112 RM 165.00
2996 MS 2395-1:2011 ROAD VEHICLES - END-OF-LIFE VEHICLES - PART 1: GENERAL REQUIREMENTS 21 RM 30.00
Road vehicles - End-of life vehicles - Part 2: Hazardous substances -
2997 MS 2395-2:2014 14 RM 15.00
Requirements and vehicle ranking
2998 MS 2396:2011 INFORMATION TECHNOLOGY - KEYBOARD LAYOUT FOR JAWI CHARACTERS 16 RM 30.00
3001 MS 2397:2016, AMD. 1:2017 Coated glass in building - Specification (First revision) FREE 3 RM -
MS ISO 2398:2007 Rubber hoses, textile-reinforced, for compressed air - Specification (ISO
3002 16 RM 30.00
(CONFIRMED:2013) 2398:2006, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3014 MS 2404-2:2015 Pressure Vessel Inspection Code - Part 2: Repairs and alterations 45 RM 60.00
3015 MS 2404-1:2011 PRESSURE VESSEL INSPECTION CODE - PART 1: INSERVICE INSPECTION 79 RM 120.00
WATER QUALITY - DETERMINATION OF THE CHEMICAL OXYGEN DEMAND (ISO
3016 MS 2405:2011 14 RM 15.00
6060:1989, MOD)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3030 MS 2413-3:2011 (P) ELECTRIC MOTORCYCLES - SPECIFICATION - PART 3: PERFORMANCE TEST 11 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3035 MS 2419:2011 PROTECTIVE GLOVES - GENERAL REQUIREMENTS AND TEST METHODS 33 RM 45.00
ANIMAL AND VEGETABLE FATS AND OIL - DETERMINATION OF ANISIDINE
3036 MS 2422:2011 14 RM 15.00
VALUE (FIRST REVISION) (ISO 6885:2006, MOD)
3043 MS 2426:2011 Planning and designing for basement parking - Code of practice 38 RM 60.00
3044 MS 2427:2011 Welding - Guidelines for a metallic materials grouping system 13 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3057 MS 2436-4:2014 Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices 42 RM 60.00
Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors -
3058 MS 2436-2-2:2013 45 RM 60.00
Passive infrared detectors
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3059 MS 2436-1:2012 Alarm systems - Intrusion and hold-up systems - Part 1: System requirements 50 RM 75.00
3060 MS 2436-7:2012 Alarm systems - Intrusion and hold-up systems - Part 7: Application guidelines 60 RM 90.00
Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for
3061 MS 2436-2-4:2014 48 RM 75.00
combined passive infrared and microwave detectors
Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors
3062 MS 2436-2-7-2:2014 45 RM 60.00
- Glass break detectors (passive)
Alarm systems - Intrusion and hold-up systems - Part 8: Security fog
3063 MS 2436-8:2014 29 RM 45.00
device/systems
3064 MS 2436-6:2014 Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies 50 RM 75.00
Alarm systems - Intrusion and hold-up systems - Part 5-3: Requirements for
3065 MS 2436-5-3:2014 31 RM 45.00
interconnections equipment using radio frequency techniques
Occupational safety and health work practices for communications
3066 MS 2438:2012 50 RM 75.00
infrastructure - Guidelines
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3073 MS 2443:2012 Information technology - Jawi coded character set for information interchange 16 RM 30.00
3074 MS 2444:2012 Information technology - An operational model for characters and glyphs 40 RM 60.00
3076 MS 2446:2012 Accommodation premise - Classification - Criteria and requirement for hotels 34 RM 45.00
Accommodation premise - Classification - Criteria and requirement for hotel
3077 MS 2447:2012 31 RM 45.00
apartments
Performance rating of water-chilling packages using the vapor compression
3078 MS 2449:2012 58 RM 90.00
cycle
Performance rating of water-chilling packages using the vapor compression
3079 MS 2449:2012, AMD. 1:2013 FREE 5 RM -
cycle AMENDMENT 1
Rubber, vulcanized or thermoplastic - Determination of adhesion to rigid
3080 MS 2450:2012 20 RM 30.00
substrate - 90° peel method (First revision) (ISO 813:2010, MOD)
3082 MS 2452:2012 Disposable plastics food containers for microwave oven use - Specification 15 RM 15.00
3083 MS 2453:2012 Symbol for plastic products in contact with food - General guideline 11 RM 15.00
3084 MS 2454:2012 Eco-labelling criteria for paper based packaging products 14 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3094 MS 2468:2012 Practice for assessment of attaining clean up level for contaminated site closure 24 RM 30.00
PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE RADIANCE FACTOR
3095 MS ISO 2469:2008 31 RM 45.00
(ISO 2469:2007, IDT)
Soil quality - Chemical analysis - Determination of organic matter content
3096 MS 2469:2012 10 RM 15.00
(Walkley and Black titration method) (First revision)
PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE
3097 MS ISO 2470-2:2009 FACTOR - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65 BRIGHTNESS) (ISO 19 RM 30.00
2470-2:2008, IDT)
PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE
3098 MS ISO 2470-1:2010 FACTOR - PART 1: INDOOR DAYLIGHT CONDITIONS (ISO BRIGHTNESS) (FIRST 19 RM 30.00
REVISION) (ISO 2470-1:2009, IDT)
3099 MS 2470:2012 Guide for developing conceptual site models for contaminated sites 18 RM 30.00
PAPER AND BOARD - DETERMINATION OF OPACITY (PAPER BACKING) - DIFFUSE
3100 MS ISO 2471:2010 20 RM 30.00
REFLECTANCE METHOD (FIRST REVISION) (ISO 2471:2008, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3107 MS 2476:2012 Guidelines for disposal of laboratory chemical wastes (LCW) 36 RM 60.00
Specification and qualification of welding procedures for metallic materials -
3108 MS 2477-11:2012 Welding procedure test - Part 11: Electron and laser beam welding (ISO 51614 - 35 RM 45.00
11:2002, MOD)
Specification and qualification of welding procedures for metallic materials -
3109 MS 2477-6:2012 Welding procedure test - Part 6: Arc and gas welding of copper and its alloys 32 RM 45.00
(ISO 15614-6:2006, IDT)
Specification and qualification of welding procedures for metallic materials -
3110 MS 2477-5:2012 Welding procedure test - Part 5: Arc welding of titanium, zirconium and their 31 RM 45.00
alloys (ISO 15614-5:2004, IDT)
Specification and qualification of welding procedures for metallic materials -
3111 MS 2477-8:2012 Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 28 RM 45.00
15614-8:2002, IDT)
Specification and qualification of welding procedures for metallic materials -
3112 MS 2477-12:2012 Welding procedure test - Part 12: Spot, seam and projection welding (ISO 19 RM 30.00
15614-12:2004, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3120 MS 2480-1:2012 Hard drawn steel wires - Part 1: Principally for static load 14 RM 15.00
3121 MS 2480-2:2012 Hard drawn steel wires - Part 2: Principally for dynamic load 15 RM 15.00
3122 MS 2481:2012 Compressed natural gas (CNG) dispensing and measuring systems for vehicles 31 RM 45.00
Code of practice for deploying secure applications through the Third Party
3123 MS 2482-2:2015 Gateway for Government Multipurpose Card - Part 2: Applet configuration 37 RM 60.00
(First revision)
Code of practice for deploying secure applications through the Third Party
3124 MS 2482-1:2015 Gateway for Government Multipurpose Card - Part 1: Secure connectivity (First 26 RM 45.00
revision)
Code of practice for deploying secure applications through the Third Party
3125 MS 2482-2:2012 30 RM 45.00
Gateway for Malaysia Multipurpose Smart Card - Part 2: Applet configuration
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Code of practice for deploying secure applications through the Third Party
3126 MS 2482-1:2012 19 RM 30.00
Gateway for Malaysia Multipurpose Smart Card - Part 1: Secure connectivity
3127 MS 2483:2012 Respiratory protective devices - Definitions of terms and pictograms 19 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3143 MS 2502:2012 Eco-labelling criteria for biodegradable fabric care product 12 RM 15.00
3144 MS 2503:2012 Good Animal Husbandry Practice - Cave Edible-nest Swiftlet ranching 19 RM 30.00
Ophthalmic optics - Contact lenses - Hygienic management of multipatient use
3145 MS 2504:2012 14 RM 15.00
trial contact lenses
Guidelines for sampling of household solid waste - Composition and
3146 MS 2505:2012 34 RM 45.00
characterisation analysis
THERMOPLASTICS PIPES – LONGITUDINAL REVERSION – PART 1 :
3147 MS ISO 2505-1 : 2002 13 RM 15.00
DETERMINATION METHODS (ISO 2505-1:1994, IDT)
THERMOPLASTICS PIPES – LONGITUDINAL REVERSION – PART 2 :
3148 MS ISO 2505-2 : 2002 DETERMINATION PARAMETERS (ISO 2505-2:1994 AND TECHNICAL 14 RM 15.00
CORRIGENDUM 1:1997, IDT)
3149 MS 2506-1:2012 Mortar for masonry - Specification - Part 1: Rendering and plastering mortar 30 RM 45.00
3150 MS 2506-2:2012 Mortar for masonry - Specification - Part 2: Masonry mortar 27 RM 45.00
THERMOPLASTICS PIPES AND FITTINGS - VICAT SOFTENING TEMPERATURE –
3151 MS ISO 2507-1: 2002 17 RM 30.00
PART 1: GENERAL TEST METHOD (ISO 2507-1:1995, IDT)
THERMOPLASTICS PIPES AND FITTINGS - VICAT SOFTENING TEMPERATURE –
PART 2 : TEST CONDITIONS FOR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
3152 MS ISO 2507-2: 2002 OR CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) PIPES AND FITTINGS AND 13 RM 15.00
FOR HIGH IMPACT RESISTANCE POLY(VINYL CHLORIDE) (PVC-HI) PIPES (ISO
2507-2:1995, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3162 MS 2514:2015 Electric bicycles (electric pedal assisted bicycles) - Specification 22 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3175 MS 2523:2013 Metal sheet roof and wall cladding - Test method 21 RM 30.00
Structural shielding design and evaluation for megavoltage X- and gamma-ray
3176 MS 2524:2013 40 RM 60.00
radiotherapy facilities - Code of practice
3177 MS 2525:2013 Software Development Kit for Malaysia Multipurpose Smart Card 22 RM 30.00
3178 MS 2526-11:2014 Urban stormwater management - Part 11: Water quality ponds and wetlands 19 RM 30.00
3179 MS 2526-12:2014 Urban stormwater management - Part 12: Erosion and sediment control 22 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3181 MS 2526-1:2012 Urban stormwater management - Part 1: Design acceptance criteria 27 RM 45.00
3182 MS 2526-4:2014 Urban stormwater management - Part 4: Roof and property drainage 20 RM 30.00
3184 MS 2526-10:2014 Urban stormwater management - Part 10: Gross pollutant traps 16 RM 30.00
3185 MS 2526-3:2012 Urban stormwater management - Part 3: Quality design fundamentals 20 RM 30.00
3186 MS 2526-2:2012 Urban stormwater management - Part 2: Quantity design fundamentals 40 RM 60.00
3190 MS 2526-13:2014 Urban stormwater management - Part 13: Pavement drainage 28 RM 45.00
3191 MS 2526-14:2014 Urban stormwater management - Part 14: Drains and swales 21 RM 30.00
3193 MS 2526-19:2014 Urban stormwater management - Part 19: Gate and pump 18 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3194 MS 2526-15:2014 Urban stormwater management - Part 15: Pipe Drains 23 RM 30.00
3195 MS 2526-16:2014 Urban stormwater management - Part 16: Engineered channels 19 RM 30.00
3196 MS 2526-17:2014 Urban stormwater management - Part 17: Bioengineered channels 18 RM 30.00
3197 MS 2526-20:2014 Urban stormwater management - Part 20: Hydraulic structures 20 RM 30.00
3198 MS 2527:2012 Pineapple (Ananas comosus L.) vegetative planting materials - Specification 22 RM 30.00
3204 MS 2530-1:2013, ERR.1:2014 Malaysian Sustainable Palm Oil (MSPO) Part 1: General principles ERRATA 1 FREE 2 RM -
Malaysian Sustainable Palm Oil (MSPO): Part 2: General principles for
3205 MS 2530-2:2013, ERR. 1:2014 FREE 2 RM -
independent smallholders
Malaysian Sustainable Palm Oil (MSPO): Part 3: General principles for oil palm
3206 MS 2530-3:2013 27 RM 45.00
plantations and organised smallholders
3207 MS 2530-1:2013 Malaysian Sustainable Palm Oil (MSPO): Part 1: General principles 20 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Malaysian Sustainable Palm Oil (MSPO): Part 4: General principles for palm oil
3208 MS 2530-4:2013 23 RM 30.00
mills
Malaysian Sustainable Palm Oil (MSPO): Part 2: General principles for
3209 MS 2530-2:2013 18 RM 30.00
independent smallholders
3210 MS 2531:2013 Rubber, raw natural - Determination of dry rubber content (DRC) 15 RM 15.00
3214 MS 2535:2013 (P) Diesel fuel - Blending up to 10 % of palm methyl ester - EURO 2M specification 13 RM 15.00
3215 MS 2536:2013 (BM) Ikan Kelisa Emas Malaysia (Scleropages formosus) - Spesifikasi 15 RM 15.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3227 MS 2544:2014 Oil and gas production facilities - Protective coatings and linings - Specification 62 RM 90.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3235 MS 2550:2014, ERR.1: 2016 Cleaning performance - Commercial and public buildings ERRATA 1 FREE 2 RM -
3236 MS 2551:2014 Speed bump - Guidelines for planning and design 14 RM 15.00
Respiratory protective devices - Mouthpiece Assemblies - Requirements,
3237 MS 2552:2014, ERR.1:2015 FREE 2 RM -
testing, marking ERRATA 1
Respiratory protective devices - Mouthpiece assemblies - Requirements,
3238 MS 2552:2014 26 RM 45.00
testing, marking
Respiratory protective devices - Particle filters - Requirements, testing, marking
3239 MS 2553:2014, ERR.1:2015 FREE 2 RM -
ERRATA 1
3240 MS 2553:2014 Respiratory protective devices - Particle filters - Requirements, testing, marking 41 RM 60.00
Respiratory protective devices - Gas filter(s) and combined filter(s) -
3241 MS 2554:2014, ERR.1:2015 FREE 2 RM -
Requirements, testing, marking ERRATA 1
Respiratory protective devices - Gas filter(s) and combined filter(s) -
3242 MS 2554:2014 32 RM 45.00
Requirements, testing, marking
3246 MS 2558:2014 Safety and health signage used in the workplace - Specification (First revision) 87 RM 135.00
Safety and health signage used in workplace - Specification (First revision)
3247 MS 2558:2014, ERR. 1:2016 FREE 2 RM -
ERRATA 1
Limestone, quicklime, hydrated lime and putty lime - Methods for physical
3248 MS 2559:2014 120 RM 165.00
testing
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3249 MS 2560:2014 Gas cylinders - Safe handling (First revision) (ISO 11625:2007, MOD) 23 RM 30.00
Radiation protection and performance evaluation of PET-CT imaging -
3250 MS 2561:2014 23 RM 30.00
Guidelines
3251 MS 2562:2014 Moulded expanded perlite block and pipe thermal insulation - Specification 19 RM 30.00
3252 MS 2563:2014 Goods vehicles - Chassis frame modification - Code of Practice 51 RM 75.00
Performance criteria and test procedures for continuous emission monitoring
3253 MS 2564:2014 78 RM 120.00
systems (CEMS)
3260 MS 2571:2017 Aluminium composite panel for exterior and interior cladding - Specification 34 RM 45.00
3261 MS 2571:2014 (P) Aluminium composite panel for exterior and interior wall 34 RM 45.00
Guidelines for power system steady state, transient stability and reliability
3262 MS 2572:2014 200 RM 285.00
studies
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3264 MS 2574:2014 Minimum energy performance standards (MEPS) for domestic fan 10 RM 15.00
3265 MS 2576:2014 Minimum energy performance standards (MEPS) for television 12 RM 15.00
3266 MS 2577:2014 Architecture and asset management of masjid - Code of practice 41 RM 60.00
MS ISO 2578:1995 PLASTICS - DETERMINATION OF TIME - TEMPERATURE LIMITS AFTER
3267 27 RM 45.00
(CONFIRMED:2008) PROLONGED EXPOSURE TO HEAT
3268 MS 2578:2014, AMD. 1:2017 Ceramic wash basins - Specification AMENDMENT 1 FREE 3 RM -
3275 MS 2583:2014 Identification of the contents of medical gas containers (First revision) 12 RM 15.00
Specification for the material, marking, dimensions and type test of crimp type
3276 MS 2584:2014 16 RM 30.00
copper aluminium Bi-metal lugs for use with XLPE insulated and compact
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3277 MS 2585:2014, ERR. 1:2015 Road Vehicles - Clutches and brakes - Vocabulary ERRATA 1 FREE 2 RM -
3279 MS 2586-1:2015 Smoke and heat control systems - Part 1: Specification for smoke barriers 52 RM 75.00
3280 MS 2586-7:2015 Smoke and heat control systems - Part 7: Smoke duct sections 28 RM 45.00
3281 MS 2586-10:2015 Smoke and heat control systems - Part 10: Power supplies 45 RM 60.00
Portable container for consumer use - Petrol, kerosene and diesel -
3282 MS 2587:2015 16 RM 30.00
Specification
Citrus-greening-disease (CGD) free for Citrus (Citrus reticulate L.) planting
3283 MS 2588:2015 14 RM 15.00
material - Specification
Measurement of fluid flow in closed conduits - Ultrasonic meter for custody
3284 MS 2589:2015 135 RM 195.00
transfer and allocation gas measurement
Petroleum and gas industries - System integrity management of petroleum
3285 MS 2590:2014 94 RM 135.00
liquid pipelines
Petroleum and gas industries - System integrity management of hydrocarbon
3286 MS 2591:2014 130 RM 180.00
gas pipelines
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3290 MS 2595:2014 Minimum energy performance standards (MEPS) for refrigerator 13 RM 15.00
IRON ORES - DETERMINATION OF HYGROSCOPIC MOISTURE IN ANALYTICAL
3291 MS ISO 2596:2011 SAMPLES - GRAVIMETRIC, KARL FISHER AND MASS-LOSS METHODS (FIRST 43 RM 60.00
REVISION) (ISO 2596:2006, IDT)
Concrete roofing tiles and fittings for roof covering and wall cladding- Part 1:
3292 MS 2596-1:2014 26 RM 45.00
Specification (First revision)
Concrete roofing tiles and fittings for roof covering and wall cladding - Part 3:
3293 MS 2596-3:2014 17 RM 30.00
Installation for roof covering (First revision)
Concrete roofing tiles and fittings for roof covering and wall cladding - Part 2:
3294 MS 2596-2:2014 34 RM 45.00
Test methods (First revision)
IRON ORES - DETERMINATION OF TOTAL IRON CONTENT - PART 1: TITRIMETRIC
3295 MS ISO 2597-1:2011 METHOD AFTER TIN(II) CHLORIDE REDUCTION (FIRST REVISION) (ISO 2597- 23 RM 30.00
1:2006, IDT)
3296 MS 2597:2014 Minimum energy performance standards (MEPS) for air conditioners 11 RM 15.00
MS ISO 2598-1:2002 Iron ores - Determination of silicon content - Part 1: Gravimetric methods (First
3297 18 RM 30.00
(CONFIRMED:2013) revision) (ISO 2598-1:1992, IDT)
MS ISO 2598-2:2002 Iron ores - Determination of silicon content - Part 2: Reduced molybdosilicate
3298 18 RM 30.00
(CONFIRMED:2013) spectrophotometric method (First revision) (ISO 2598-2:1992, IDT)
3299 MS 2598:2014 Minimum energy performance standards (MEPS) for lamps 11 RM 15.00
MS ISO 2599:2004 Iron ores - Determination of phosphorus content - EDTA titrimetric method (ISO
3300 24 RM 30.00
(CONFIRMED:2013) 2599:2003, IDT)
3301 MS 2599:2015 Rice (Oryza sativa L.) hybrid seed planting materials - Specification 14 RM 15.00
Implants for surgery - Skeletal pins and wires - Part 2: Steinmann skeletal pins -
3302 MS 2600:2015 10 RM 15.00
Dimensions (ISO 5838-2:1991, MOD)
Implants for surgery - Skeletal pins and wires - Part 3: Kirschner skeletal wires
3303 MS 2601:2015 12 RM 15.00
(ISO 5838-3:1993, MOD)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3305 MS 2602:2015 Compressed air work in tunnelling - Code of practice 102 RM 150.00
3307 MS 2608:2015 Measurement of gas flow in closed conduits - Turbine meters 40 RM 60.00
3310 MS 2612:2015 Raw-Unclean Edible Birdnest (EBN) - House nest - Specification 13 RM 15.00
Road vehicles - Suspension strut and telescopic shock absorbers strength and
3311 MS 2613:2017 26 RM 45.00
durability
3312 MS 2615:2015 Systems approach for pest risk management - Fruits 17 RM 30.00
3316 MS 2618:2015 Fresh broccoli (Brassica oleracea L. var. italica) - Specification 22 RM 30.00
3317 MS 2618:2015 (BM) Brokoli segar (Brassica oleracea L. var. italica) - Spesifikasi 22 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3320 MS 2651:2015 Cold-reduced carbon steel sheet and strip of commercial and drawing qualities 31 RM 45.00
Cold-reduced carbon steel sheet and strip of commercial and drawing qualities
3321 MS 2651:2015, AMD. 1:2017 FREE 2 RM -
AMENDMENT 1
Cold-reduced carbon steel sheet and strip of commercial and drawing qualities
3322 MS 2651:2015, COR. 1:2016 FREE 3 RM -
TECHNICAL CORRIGENDUM 1
Site planning and installation of Magnetic Resonance Imaging (MRI) system -
3323 MS 2652:2015 40 RM 60.00
Code of practice
3324 MS 2653:2015, ERR. 1:2016 Limestone fines for use with Portland cement - Specification FREE 2 RM -
3325 MS 2653:2015 Limestone fines for use with Portland Cement - Specification 29 RM 45.00
Crimping type hexagon dies for cable lugs, cable links and the rounding dies for
3326 MS 2654:2015 sector cable - Installation method and specification for the materials, marking 15 RM 15.00
and dimensions
3327 MS 2655:2017 Fresh sweet potato (Ipomoea batatas L.) - Specification 19 RM 30.00
3328 MS 2655:2015 (BM) Keledek segar (Ipomoea batatas L.) - Spesifikasi 18 RM 30.00
MS 2655:2015 (BM), PINDAAN
3329 Keledek segar (Ipomoea batatas L.) - Spesifikasi FREE 5 RM -
1:2017
3330 MS 2656:2016 Safety of loads on vehicles for carrying general goods - Code of practice 77 RM 120.00
Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc
3331 MS 2657:2016, ERR. 1:2016 FREE 3 RM -
alloyed with aluminium and magnesium
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc
3332 MS 2657:2016 29 RM 45.00
alloyed with aluminium and magnesium
3334 MS 2658:2016, AMD. 1:2017 Hot rolled steel floor plates - Specification AMENDMENT 1 FREE 3 RM -
3335 MS 2659:2016 Low-alloyed steels for machine structural use - Specification 21 RM 30.00
Magnetic Resonance Imaging (MRI) systems acceptance tests and quality
3336 MS 2661:2017 26 RM 45.00
control - Guidelines
3337 MS 2662:2017 Connection of distributed generation to distribution network - Code of practice 28 RM 45.00
3342 MS 2666:2016 Glass in buildings - Insulating glass unit (IGU) - Performance and evaluation 52 RM 75.00
3343 MS 2667:2016 Alloy steel bolting materials for high temperature service 15 RM 15.00
3344 MS 2668:2016 Alloy steel bars for special application bolting materials 20 RM 30.00
Tint film on glazing of road vehicles - Methods and requirements of light
3345 MS 2669:2017, AMD. 1:2018 transmittance, ultraviolet transmittance, total solar energy transmittance and FREE 3 RM -
other related factors
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3354 MS 2674-1:2017 Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions 38 RM 60.00
Medical gas system - Part 1: Code of practice for the design, installation,
3355 MS 2675-1:2017 220 RM 315.00
validation and verification
3356 MS 2675-2:2017 Medical gas system - Part 2: Code of practice for operation and maintenance 78 RM 120.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Energy efficiency and use of renewable energy for residential buildings - Code
3360 MS 2680:2017 61 RM 90.00
of practice
3361 MS 2681:2017 Cocoa (Theobroma cacao L.) planting material - Specification 35 RM 45.00
3362 MS 2682:2017 Hot rolled wire rod for pre-stressed steel - Specification 14 RM 15.00
3364 MS 2684:2017 Coconut milk and coconut cream - Specification and test methods 17 RM 30.00
Precast concrete pipes and fittings for drainage and sewerage - Specification -
3365 MS 2685:2017 43 RM 60.00
Pipes and fittings with ogee joints
3366 MS 2686:2017 Ready-to-eat meat products - Canned and pouch - Specification 16 RM 30.00
The installation and maintenance of emergency and KELUAR sign lighting and
3367 MS 2687:2018 69 RM 105.00
power supply systems in buildings - Code of practice
3372 MS 2695:2018 Sugar and molasses - Specification and test methods 28 RM 45.00
3373 MS 2696:2018 Motor vehicle aftermarket - Service and spare parts (2S) - Code of practice 24 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Motor vehicle aftermarket - Repair, reuse, recycle and remanufacture (4R) for
3374 MS 2697:2018 25 RM 30.00
parts and components - Code of practice
3375 MS 2698:2018 Maintenance for lifts and escalators - Rules for maintenance instructions 30 RM 45.00
3379 MS ISO 2758:2007 PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001, IDT) 23 RM 30.00
3380 MS ISO 2759:2007 BOARD - DETERMINATION OF BURSTING STRENGTH (ISO 2759:2001, IDT) 23 RM 30.00
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DENSITY
3381 MS ISO 2781:2010 14 RM 15.00
(FIRST REVISION) (ISO 2781:2008, IDT)
RUBBER, VULCANIZED OR THERMOPLASTIC – DETERMINATION OF
3382 MS ISO 2782:2007 25 RM 30.00
PERMEABILITY TO GASES (FIRST REVISION) (ISO 2782:2006, IDT)
MS ISO 2818:1995
3383 Plastics - Preparation of test specimens by machining (ISO 2818:1994, IDT) 24 RM 30.00
(CONFIRMED:2012)
SODIUM FLUORIDE FOR INDUSTRIAL USE – DETERMINATION OF WATER
3384 MS ISO 2831 : 2003 9 RM 15.00
INSOLUBLE MATTER (ISO 2831:1973, IDT)
SODIUM FLUORIDE FOR INDUSTRIAL USE – DETERMINATION OF MOISTURE
3385 MS ISO 2832 : 2003 9 RM 15.00
CONTENT (ISO 2832:1973, IDT)
SODIUM FLUORIDE FOR INDUSTRIAL USE – DETERMINATION OF FLUORINE
3386 MS ISO 2833 : 2003 13 RM 15.00
CONTENT – MODIFIED WILLARD-WINTER METHOD (ISO 2833:1973, IDT)
GRAPHIC TECHNOLOGY – PRINTS AND PRINTING INKS – ASSESSMENT OF
3387 MS ISO 2836 : 2001 15 RM 15.00
RESISTANCE TO VARIOUS AGENTS (ISO 2836 : 1999, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3414 MS ISO 3036:2009 BOARDS - DETERMINATION OF PUNCTURE RESISTANCE (ISO 3036:1975, IDT) 11 RM 15.00
CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH
3415 MS ISO 3037:2008 16 RM 30.00
RESISTANCE (UNWAXED EDGE METHOD) (ISO 3037:2007, IDT)
IRON ORES - SAMPLING AND SAMPLE PREPARATION PROCEDURES (FIRST
3416 MS ISO 3082:2010 93 RM 135.00
REVISION) (ISO 3082:2009, IDT)
MS ISO 3084:2002 Iron ores - Experimental methods for the evaluation of quality variation (First
3417 30 RM 45.00
(CONFIRMED:2013) revision) (ISO 3084:1998, IDT)
IRON ORES - EXPERIMENTAL METHODS FOR CHECKING THE PRECISION OF
3418 MS ISO 3085:2010 SAMPLING, SAMPLE PREPARATION AND MEASUREMENT (FIRST REVISION) (ISO 31 RM 45.00
3085:2002, IDT)
IRON ORES - EXPERIMENTAL METHODS FOR CHECKING THE BIAS OF SAMPLING
3419 MS ISO 3086:2010 33 RM 45.00
(FIRST REVISION) (ISO 3086:2006, IDT)
MS ISO 3087:2002 Iron ores - Determination of the moisture content of a lot (First revision) (ISO
3420 28 RM 45.00
(CONFIRMED:2013) 3087:1998, IDT)
THERMOPLASTICS PIPES – DETERMINATION OF RESISTANCE TO EXTERNAL
3421 MS ISO 3127 : 2002 21 RM 30.00
BLOWS-ROUND-THE-CLOCK METHOD (ISO 3127:1994, IDT)
Plastics - Determination of melting behaviour (melting temperature or melting
MS ISO 3146:2004
3422 range) of semi-crystalline polymers by capillary tube and polarizing-microscope 20 RM 30.00
(CONFIRMED:2012)
methods (First revision) (ISO 3146:2000, COR. 1:2002, IDT)
MS ISO 3154:2003 Stranded wire ropes for mine hoisting - Technical delivery requirements (ISO
3423 22 RM 30.00
(CONFIRMED:2012) 3154:1988, IDT)
MS ISO 3155:2003 Stranded wire ropes for mine hoisting - fibre components – characteristics and
3424 10 RM 15.00
(CONFIRMED:2012) tests (ISO 3155:1976, IDT)
MS ISO 3156:2004 Stranded wire ropes for mine hoisting - impregnating compounds, lubricants
3425 14 RM 15.00
(CONFIRMED:2012) and service dressings - characteristics and tests (ISO 3156:1976, IDT)
MS ISO 3167:2003 PLASTICS - MULTIPURPOSE TEST SPECIMENS (FIRST REVISION) (ISO 3167:2002,
3426 19 RM 30.00
(CONFIRMED:2011) IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3427 MS ISO 3170:2009 PETROLEUM LIQUIDS - MANUAL SAMPLING (ISO 3170:2004, IDT) 66 RM 105.00
3428 MS ISO 3171:2009 PETROLEUM LIQUIDS - AUTOMATIC PIPELINE SAMPLING (ISO 3171:1988, IDT) 62 RM 90.00
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE
3429 MS ISO 3183:2009 157 RM 225.00
TRANSPORTATION SYSTEMS (FIRST REVISION) (ISO 3183:2007, IDT)
PLASTICS - POLYMERS/RESINS IN THE LIQUID STATE OR AS EMULSIONS OR
3430 MS ISO 3219:2007 DISPERSIONS - DETERMINATION OF VISCOSITY USING A ROTATIONAL 17 RM 30.00
VISCOMETER WITH DEFINED SHEAR RATE (ISO 3219:1993, IDT)
Microfilming of technical drawings and other drawing office documents - Part 2:
MS ISO 3272-2:2005
3431 Quality criteria and control of 35 mm silver gelatin microfilms (ISO 3272-2:1994, 17 RM 30.00
(CONFIRMED:2015)
IDT)
STATISTICAL INTERPRETATION OF DATA – COMPARISON OF TWO MEANS IN
3432 MS ISO 3301:1994 16 RM 30.00
THE CASE OF PAIRED OBSERVATIONS
TEST SIEVES – TECHNICAL REQUIREMENTS AND TESTING – PART 2 : TEST SIEVES
3433 MS ISO 3310-2 : 2002 20 RM 30.00
OF PERFORATED METAL PLATE (ISO 3310-2: 1999, IDT)
TEST SIEVES - TECHNICAL REQUIREMENTS AND TESTING - PART 1 : TEST SIEVES
3434 MS ISO 3310-1 : 2002 26 RM 45.00
OF METAL WIRE CLOTH (ISO 3310-1 : 2000, IDT)
Rubber, vulcanized or thermoplastic - Determination of stress relaxation in
3435 MS ISO 3384-1:2013 compression - Testing at constant temperature (First revision) (ISO 3384- 22 RM 30.00
1:2011, IDT)
DIMENSIONS OF RIGID RECTANGULAR PACKAGES – TRANSPORT PACKAGES (ISO
3436 MS ISO 3394 : 2003 13 RM 15.00
3394:1984, IDT)
INDUSTRIAL LIQUID LUBRICANTS - ISO VISCOSITY CLASSIFICATION (SECOND
3437 MS ISO 3448:2009 15 RM 15.00
REVISION) (ISO 3448:1992, IDT)
Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at
3438 MS ISO 3452-5:2014 16 RM 30.00
temperatures higher than 50 °C (ISO 3452-5:2008, IDT)
Non-destructive testing - Penetrant testing - Part 4: Equipment (ISO
3439 MS ISO 3452-4:2014 10 RM 15.00
3452-4:1998. IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 3636:2005 Size designation of clothes - Men’s and boys’ outerwear garments (ISO
3454 14 RM 15.00
(CONFIRMED:2015) 3636:1977, IDT)
MS ISO 3637:2005 Size designation of clothes - Women’s and girls’ outerwear garments (ISO
3455 14 RM 15.00
(CONFIRMED:2015) 3637:1977, IDT)
MS ISO 3638:2005
3456 Size designation of clothes - Infants’ garments (ISO 3638:1977, IDT) 12 RM 15.00
(CONFIRMED:2015)
ANIMAL AND VEGETABLES FATS AND OILS - DETERMINATION OF
3457 MS ISO 3657:2009 17 RM 30.00
SAFONIFICATION VALUE (ISO 3657:2002, IDT)
3458 MS ISO 3676 : 2003 PACKAGING - UNIT LOADS SIZES - DIMENSIONS (ISO 3676:1983, IDT) 9 RM 15.00
DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD
3459 MS ISO 3679:2009 29 RM 45.00
(ISO 3679:2004, IDT)
PULPS - PREPARATION OF LABORATORY SHEETS FOR THE MEASUREMENT OF
3460 MS ISO 3688:2002 15 RM 15.00
DIFFUSE BLUE REFLECTANCE FACTOR (ISO BRIGHTNESS) (ISO 3688 : 1999, IDT)
PAPER AND BOARD - DETERMINATION OF BURSTING STRENGTH AFTER
3461 MS ISO 3689:2010 10 RM 15.00
IMMERSION IN WATER (ISO 3689:1983, IDT)
WATER FOR ANALYTICAL LABORATORY USE - SPECIFICATION AND TEST
3462 MS ISO 3696:2007 14 RM 15.00
METHODS (ISO 3696:1987, IDT)
HARDMETALS - ROCKWELL HARDNESS TEST (SCALE A) -PART 2 : PREPARATION
3463 MS ISO 3738-2 : 2001 13 RM 15.00
AND CALIBRATION OF STANDARD TEST BLOCKS
MS ISO 3779:2011 Road vehicles - Vehicle identification number (VIN) - Content and structure
3464 15 RM 15.00
(CONFIRMED:2016) (First revision) (ISO 3779:2009, IDT)
MS ISO 3780:2011 Road vehicles - World manufacturer identifier (WMI) code (First revision) (ISO
3465 14 RM 15.00
(CONFIRMED:2016) 3780:2009, IDT)
MS ISO 3801:2003 Textiles - Woven fabrics - Determination of mass per unit length and mass per
3466 14 RM 15.00
(CONFIRMED:2015) unit area (ISO 3801:1977 and AMD. 1:1977, IDT)
CYLINDERS FOR ACETYLENE - BASIC REQUIREMENTS - PART 1: CYLINDERS
3467 MS ISO 3807-1:2007 34 RM 45.00
WITHOUT FUSIBLE PLUGS (FIRST REVISION) (ISO 3807-1:2000, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 4027:2005
3494 HEXAGON SOCKET SET SCREWS WITH CONE POINT (ISO 4027:2003, IDT) 15 RM 15.00
(CONFIRMED:2011)
MS ISO 4028:2005
3495 HEXAGON SOCKET SET SCREWS WITH DOG POINT (ISO 4028:2003, IDT) 14 RM 15.00
(CONFIRMED:2011)
MS ISO 4029:2005
3496 HEXAGON SOCKET SET SCREWS WITH CUP POINT (ISO 4029:2003, IDT) 14 RM 15.00
(CONFIRMED:2011)
MS ISO 4032:2007
3497 HEXAGON NUTS, STYLE 1 - PRODUCT GRADES A AND B (ISO 4032:1999, IDT) 18 RM 30.00
(CONFIRMED:2011)
MS ISO 4033:2007
3498 HEXAGON NUTS, STYLE 2 - PRODUCT GRADES A AND B (ISO 4033:1999, IDT) 16 RM 30.00
(CONFIRMED:2011)
MS ISO 4034:2007
3499 HEXAGON NUTS - PRODUCT GRADE C (ISO 4034:1999, IDT) 16 RM 30.00
(CONFIRMED:2011)
MS ISO 4035:2007 HEXAGON THIN NUTS (CHAMFERED) - PRODUCT GRADES A AND B (ISO
3500 17 RM 30.00
(CONFIRMED:2011) 4035:1999, IDT)
MS ISO 4036:2007 HEXAGON THIN NUTS (UNCHAMFERED) - PRODUCT GRADE B (ISO 4036:1999,
3501 17 RM 30.00
(CONFIRMED:2011) IDT)
MS ISO 4038:2005 ROAD VEHICLES - HYDRAULIC BRAKING SYSTEMS - SIMPLE FLARE PIPES, TAPPED
3502 18 RM 30.00
(CONFIRMED:2011) HOLES, MALE FITTINGS AND HOSE END FITTINGS (ISO 4038:1996, IDT)
PAPER, BOARD, PULPS AND RELATED TERMS - VOCABULARY - PART 3: PAPER-
3503 MS ISO 4046-3:2006 38 RM 60.00
MAKING TERMINOLOGY (ISO 4046-3:2002, IDT)
PAPER, BOARD, PULPS AND RELATED TERMS - VOCABULARY - PART 1:
3504 MS ISO 4046-1:2006 26 RM 45.00
ALPHABETICAL INDEX (ISO 4046-1:2002, IDT)
PAPER, BOARD, PULPS AND RELATED TERMS - VOCABULARY - PART 2: PULPING
3505 MS ISO 4046-2:2006 24 RM 30.00
TERMINOLOGY (ISO 4046-2:2002, IDT)
PAPER, BOARD, PULPS AND RELATED TERMS - VOCABULARY - PART 4: PAPER
3506 MS ISO 4046-4:2006 42 RM 60.00
AND BOARD GRADES AND CONVERTED PRODUCTS (ISO 4046-4:2002, IDT)
PAPER, BOARD, PULPS AND RELATED TERMS - VOCABULARY - PART 5:
3507 MS ISO 4046-5:2006 41 RM 60.00
PROPERTIES OF PULP , PAPER AND BOARD (ISO 4046-5:2002, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Measurement of water flow in fully charged closed conduits – meters for cold
MS ISO 4064-1:2006
3508 potable water and hot water – Part 1: Specifications (First revision) (ISO 4064- 53 RM 75.00
(CONFIRMED:2012)
1:2005, IDT)
MEASUREMENT OF WATER FLOW INCLOSED CONDUITS - METERS FOR COLD
3509 MS ISO 4064-3 : 2003 POTABLE WATER – PART 3: TEST METHODS AND EQUIPMENT (ISO 4064-3:1999, 33 RM 45.00
IDT)
MEASUREMENT OF WATER FLOW IN CLOSED CONDUITS - METERS FOR COLD
3510 MS ISO 4064-2:2003 POTABLE WATER – PART 2: INSTALLATION REQUIREMENTS AND SELECTION 17 RM 30.00
(ISO 4064-2:2001, IDT)
THERMOPLASTICS PIPES – UNIVERSAL WALL THICKNESS TABLE (ISO 4065:1996,
3511 MS ISO 4065:2003 17 RM 30.00
IDT)
RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC
3512 MS ISO 4079:2010 TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION (ISO 22 RM 30.00
4079:2009, IDT)
Rubber and plastics hoses and hose assemblies - Determination of permeability
3513 MS ISO 4080:2011 15 RM 15.00
to gas (First revision) (ISO 4080:2009, IDT)
Rubber hoses and tubing for cooling systems for internal-combustion engines -
3514 MS ISO 4081:2012 23 RM 30.00
Specification (First revision) (ISO 4081:2010, IDT)
MS ISO 4086:2007 (CONFIRMED Road vehicles - 90 semi-trailer fifth wheel kingpin - Interchangeability (ISO
3515 15 RM 15.00
:2016) 4086:2001, IDT)
MS ISO 4100:1999 Road vehicles - World parts manufacturer identifier (WPMI) code (ISO 4100 -
3516 10 RM 15.00
(CONFIRMED:2016) 1980, IDT)
MS ISO 4101:2009
3517 Drawn steel wire for elevator ropes - Specifications (ISO 4101:1983, IDT) 12 RM 15.00
(CONFIRMED:2015)
3518 MS ISO 4119:2007 PULPS - DETERMINATION OF STOCK CONCENTRATION (ISO 4119:1995, IDT) 12 RM 15.00
Meat and meat products - Determination of L-(+)-glutamic acid content -
3519 MS ISO 4134:2012 19 RM 30.00
Reference method (ISO 4134:1999, IDT)
MS ISO 4135:2006
3520 Anaesthetic and respiratory equipment - Vocabulary (ISO 4135:2001, IDT) 73 RM 105.00
(CONFIRMED:2013)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3531 MS ISO 4306-1:2014 Cranes - Vocabulary - Part 1: General (First Revision) (ISO 4306-1:2007, IDT) 99 RM 150.00
3532 MS ISO 4310:2014 Cranes - Test code and procedures (First revision) (ISO 4310:2009, IDT) 20 RM 30.00
WASHING POWDERS - DETERMINATION OF TOTAL PHOSPHORUS (V) OXIDE
3533 MS ISO 4313:2010 CONTENT - QUINOLINE PHOSPHOMOLYBDATE GRAVIMETRIC METHOD (ISO 11 RM 15.00
4313:1976, IDT)
SURFACE-ACTIVE AGENTS AND DETERGENTS - DETERMINATION OF WATER
3534 MS ISO 4317:2010 15 RM 15.00
CONTENT - KARL FISCHER METHOD (ISO 4317:1991, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3540 MS ISO 4378-3:2012 Plain bearings - Terms, definitions and classification - Part 3: Lubrication 23 RM 30.00
Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction
3541 MS ISO 4378-2:2012 17 RM 30.00
and wear (ISO 4378-2:2009, IDT)
Plain bearings - Terms, definitions and classifications - Part 1: Design, bearing
3542 MS ISO 4378-1:2012, ERR. 1:2013 1 RM -
materials and their properties (ISO 4378-1:2009, IDT) ERRATA 1
Plain bearings - Terms, definitions and classification - Part 1: Design, bearing
3543 MS ISO 4378-1:2012 36 RM 60.00
materials and their properties (ISO 4378-1:2009, IDT)
Plain bearings - Terms, definitions, classification and symbols - Part 4: Basic
3544 MS ISO 4378-4:2012 21 RM 30.00
symbols (ISO 4378-4:2009, IDT)
MS ISO 4415:2005 Size designation of clothes - Men’s and boys’ underwear, nightwear and shirts
3545 14 RM 15.00
(CONFIRMED:2015) (ISO 4415:1981, IDT)
MS ISO 4416:2006 Size designation of clothes - Women’s and girls’ underwear, nightwear,
3546 14 RM 15.00
(CONFIRMED:2015) foundation garments and shirts (ISO 4416:1981, IDT)
MS ISO 4418:2006
3547 Size designation of clothes - Gloves (ISO 4418:1978, IDT) 11 RM 15.00
(CONFIRMED:2015)
METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF
3548 MS ISO 4545-3:2009 20 RM 30.00
REFERENCE BLOCKS (FIRST REVISION) (ISO 4545-3:2005, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Methods of test for full-flow lubricating oil filters for internal combustion
MS ISO/IEC 4548-3:2005
3561 engines - Part 3: Resistance to high differential pressure and to elevated 21 RM 30.00
(CONFIRMED:2016)
temperature (ISO 4548-3:1997, IDT)
FERROALLOYS – SAMPLING AND SAMPLING PREPARATION FOR CHEMICAL
ANALYSIS – FERROCHROMIUM, FERROSILICOCHOMIUM, FERROSILICON,
3562 MS ISO 4552-1 : 2003 17 RM 30.00
FERROSILICOMANGANESE, FERROMANGANESE (FIRST REVISION) (ISO 4552-
1:1987, IDT)
TYRE VALVE THREADS – PART 2: THREADS 9V1, 10V2, 12V1 AND 13V1 (ISO
3563 MS ISO 4570 -2 : 2002 9 RM 15.00
4570-2:1979, IDT)
TYRE VALVE THREADS – PART 1: THREADS 5V1, 5V2, 6V1 AND 8V1(ISO 4570-
3564 MS ISO 4570-1 : 2002 9 RM 15.00
1:1977, IDT)
TYRE VALVE THREADS – PART 3: THREADS 8V2, 10V1, 11V1, 13V2,15V1, 16V1,
3565 MS ISO 4570-3 : 2002 15 RM 15.00
17V1, 17V2, 17V3, 19V1, 20V1 (ISO 4570-3:1980, IDT)
PLASTICS - DETERMINATION OF CHANGES IN COLOUR AND VARIATIONS IN
PROPERTIES AFTER EXPOSURE TO DAYLIGHT UNDER GLASS, NATURAL
3566 MS ISO 4582:2010 26 RM 45.00
WEATHERING OR LABORATORY LIGHT SOURCES (SECOND REVISION) (ISO
4582:2007, IDT)
HIGH-PRESSURE DECORATIVE LAMINATES - SHEET MADE FROM
3567 MS ISO 4586-1:2007 THERMOSETTING RESINS - PART 1: CLASSIFICATION AND SPECIFICATIONS (ISO 24 RM 30.00
4586-1:2004, IDT)
HIGH-PRESSURE DECORATIVE LAMINATES - SHEETS MADE FROM
3568 MS ISO 4586-2:2007 THERMOSETTING RESINS - PART 2: DETERMINATION OF PROPERTIES (ISO 4586- 93 RM 135.00
2:2007)
ADHESIVES - DETERMINATION OF TENSILE LAP SHEAR STRENGTH OF RIGID- TO-
3569 MS ISO 4587:2008 14 RM 15.00
RIGID BONDED ASSEMBLIES (ISO 4587:2003, IDT)
PLASTICS – DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX –
3570 MS ISO 4589-2:2000, AMD. 1:2012 7 RM -
PART 2 :AMBIENT-TEMPERATURE TEST (ISO 4589-2 : 1996, IDT)
PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX -
3571 MS ISO 4589-1 : 2000 16 RM 30.00
PART 1:GUIDANCE (ISO 4589-1 - 1996, IDT)
PLASTICS – DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX –
3572 MS ISO 4589-2 : 2000 32 RM 45.00
PART 2 : AMBIENT-TEMPERATURE TEST (ISO 4589-2 : 1996, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3612 MS ISO/TS 4949:2007 STEEL NAMES BASED ON LETTER SYMBOLS (ISO/TS 4949:2003, IDT) 18 RM 30.00
Cold-reduced carbon steel strip with a mass fraction of carbon over 0.25 % (ISO
3613 MS ISO 4960:2014 21 RM 30.00
4960:2007, IDT)
STEEL CASTINGS - GENERAL TECHNICAL DELIVERY REQUIREMENTS (ISO
3614 MS ISO 4990:2005, AMD 1:2011 2 RM -
4990:2003, IDT)
STEEL CASTINGS - GENERAL TECHNICAL DELIVERY REQUIREMENTS (ISO
3615 MS ISO 4990:2005 25 RM 30.00
4990:2003, IDT)
3616 MS ISO 4997:2015 Cold-reduced carbon steel sheet of structural quality 16 RM 30.00
3617 MS ISO 5001:2014 Cold-reduced carbon steel sheet for vitreous enamelling (ISO 5001:2012, IDT) 17 RM 30.00
INLET AIR CLEANING EQUIPMENT FOR INTERNAL COMBUSTION ENGINES AND
3618 MS ISO 5011:2005 55 RM 75.00
COMPRESSORS - PERFORMANCE TESTING (ISO 5011:2000, IDT)
MS ISO 5084:2003 Textiles - Determination of thickness of textiles and textile products (ISO
3619 14 RM 15.00
(CONFIRMED:2015) 5084:1996, IDT)
ACOUSTICS - MEASUREMENTS OF SOUND PRESSURE LEVEL EMITTED BY
3620 MS ISO 5130:2010 28 RM 45.00
STATIONARY ROAD VEHICLES (FIRST REVISION) (ISO 5130:2007, IDT)
Non-ducted air conditioners and heat pumps - Testing and rating for
3621 MS ISO 5151:2012 82 RM 120.00
performance (First revision) (ISO 5151:2010, IDT)
PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF
3622 MS ISO 5165:2009 24 RM 30.00
DIESEL FUELS - CETANE ENGINE METHOD (ISO 5165:1998, IDT)
MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL
MS ISO 5167-3:2005
3623 DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL – 42 RM 60.00
(CONFIRMED:2011)
PART 3: NOZZLES AND VENTURI NOZZLES (ISO 5167-3:2003, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3634 MS ISO 5288:2008 SYNCHRONOUS BELT DRIVES - VOCABULARY (ISO 5288:2001, IDT) 19 RM 30.00
BELT DRIVES - V-BELTS AND V-RIBBED BELTS - CALCULATION OF POWER
3635 MS ISO 5292:2008 14 RM 15.00
RATINGS (ISO 5292:1995, IDT)
Pulps - Determination of limiting viscosity number in cupri-ethylenediamine
3636 MS ISO 5351:2012 28 RM 45.00
(CED) solution (ISO 5351:2010, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3662 MS ISO 5626 : 1999 PAPER – DETERMINATION OF FOLDING ENDURANCE (ISO 5626:1993, IDT) 20 RM 30.00
PAPER AND BOARD - DETERMINATION OF SMOOTHNESS (BEKK METHOD) (ISO
3663 MS ISO 5627:2010 18 RM 30.00
5627:1995, Cor. 1:2002, IDT)
PAPER AND BOARD - ACCELERATED AGEING - PART 6: EXPOSURE TO
3664 MS ISO 5630-6:2010 19 RM 30.00
ATMOSPHERIC POLLUTION (NITROGEN DIOXIDE) (ISO 5630-6:2009, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 5771:2009 Rubber hoses and hose assemblies for transferring anhydrous ammonia -
3678 23 RM 30.00
(CONFIRMED:2013) specification (ISO 5771:2008, IDT)
RUBBER HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING –
3679 MS ISO 5772:2007 17 RM 30.00
SPECIFICATION (ISO 5772:1998, IDT)
MS ISO 5774:2007 Thermoplastics hoses - Textile-reinforced types for compressed-air applications
3680 26 RM 45.00
(CONFIRMED:2013) - Specification (ISO 5774:2006, IDT)
MS ISO 5893:2005 Rubber and plastics test equipment - Tensile, flexural and compression types
3681 17 RM 30.00
(CONFIRMED:2013) (Constant rate of traverse) - Specification (ISO 5893:2002, IDT)
MS ISO 5922:2005
3682 MALLEABLE CAST IRON - SPECIFICATION (ISO 5922:2005, IDT) 20 RM 30.00
(CONFIRMED:2011)
FIRE PROTECTION – FIRE EXTINGUISHING MEDIA – CARBON DIOXIDE (ISO
3683 MS ISO 5923 : 2003 21 RM 30.00
5923:1989, IDT)
Animal feeding stuffs - Determination of nitrogen content and calculation of
3684 MS ISO 5983-2:2011 crude protein content - Part 2: Block digestion and steam distillation method 22 RM 30.00
(Second Revision) (ISO 5983-2:2009, IDT)
ANIMAL FEEDING STUFFS - DETERMINATION OF NITROGEN CONTENT AND
3685 MS ISO 5983-1:2007 CALCULATION OF CRUDE PROTEIN CONTENT - PART 1: KJELDAHL METHOD 20 RM 30.00
(SECOND REVISION) (ISO 5983-1:2005, IDT)
MS ISO 5984:1996
3686 Animal feeding stuffs - Determination of crude ash (ISO 5984:1978, IDT) 10 RM 15.00
(CONFIRMED:2011)
MS ISO 5985:1996 ANIMAL FEEDING STUFFS - DETERMINATION OF ASH INSOLUBLE IN
3687 11 RM 15.00
(CONFIRMED:2011) HYDROCHLORIC ACID (ISO 5985:1978, IDT)
SODIUM HYDROXIDE FOR INDUSTRIAL USE – DETERMINATION OF MERCURY
3688 MS ISO 5993:2003 CONTENT – FLAMELESS ATOMIC ABSORPTION SPECTROMETRIC METHOD (ISO 13 RM 15.00
5993:1979, IDT)
HYPODERMIC NEEDLES FOR SINGLE USE - COLOUR CODING FOR
3689 MS ISO 6009:2011 19 RM 30.00
IDENTIFICATION (ISO 6009:1992, COR.1:2008, IDT)
3690 MS ISO 6078:1994 GLOSSARY OF TERMS FOR BLACK TEA (ISO 6078:1981, IDT) 37 RM 60.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3693 MS ISO 6107-4:2004 WATER QUALITY – VOCABULARY – PART 4 (ISO 6107-4:1993, IDT) 18 RM 30.00
WATER QUALITY - VOCABULARY - PART 1 (FIRST REVISION) (ISO 6107-1:2004,
3694 MS ISO 6107-1:2010 18 RM 30.00
IDT)
WATER QUALITY - VOCABULARY - PART 5 (FIRST REVISION) (ISO 6107-5:2004,
3695 MS ISO 6107-5:2010 15 RM 15.00
IDT)
WATER QUALITY - VOCABULARY - PART 6 (FIRST REVISION) (ISO 6107-6:2004,
3696 MS ISO 6107-6:2010 21 RM 30.00
IDT)
WATER QUALITY - VOCABULARY - PART 7 (FIRST REVISION) (ISO 6107-7:2006,
3697 MS ISO 6107-7:2010 16 RM 30.00
IDT)
WATER QUALITY - VOCABULARY - PART 2 (FIRST REVISION) (ISO 6107-2:2006,
3698 MS ISO 6107-2:2010 24 RM 30.00
IDT)
WATER QUALITY – VOCABULARY – PART 8 (ISO 6107-8:1993 and its
3699 MS ISO 6107-8:2004 44 RM 60.00
Amendment 1:2001, IDT)
ROAD VEHICLES – ELASTOMERIC BOOTS FOR DRUM-TYPE, HYDRAULIC BRAKE
3700 MS ISO 6117:2006 WHEEL CYLINDERS USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID 17 RM 30.00
(SERVICE TEMPERATURE 100 °C MAX) (ISO 6117:2005, IDT)
ROAD VEHICLES - ELASTOMERIC CUPS AND SEALS FOR CYLINDERS FOR
3701 MS ISO 6118:2008 HYDRAULIC BRAKING SYSTEMS USING A NON-PETROLEUM BASE HYDRAULIC 26 RM 45.00
BRAKE FLUID (SERVICE TEMPERATURE 70 °C MAX.) (ISO 6118: 2006, IDT)
ROAD VEHICLES - ELASTOMERIC SEALS FOR HYDRAULIC DISC BRAKE CYLINDERS
3702 MS ISO 6119:2008 USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE 20 RM 30.00
TEMPERATURE 120 °C MAX.) (ISO 6119:2006, IDT)
MS ISO 6120:2005 ROAD VEHICLES - BRAKE HOSE ASSEMBLIES FOR HYDRAULIC BRAKING SYSTEMS
3703 23 RM 30.00
(CONFIRMED:2011) USED WITH PETROLEUM - BASE BRAKE FLUID (ISO 6120:1995, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 6182-6:2009 Fire protection - Automatic sprinkler systems - Part 6: Requirements and test
3718 26 RM 45.00
(CONFIRMED:2015) methods for check valves (ISO 6182-6:2006, IDT)
MS ISO 6196-1:2005
3719 Micrographics - Vocabulary - Part 1: General terms (ISO 6196-1:1993, IDT) 25 RM 30.00
(CONFIRMED:2015)
MS ISO 6196-4:2005 Micrographics - Vocabulary - Part 4: Materials and packaging (ISO 6196-4:1998,
3720 30 RM 45.00
(CONFIRMED:2015) IDT)
MS ISO 6196-2:2005 Micrographics - Vocabulary - Part 2: Image positions and methods of recording
3721 23 RM 30.00
(CONFIRMED:2015) (ISO 6196-2:1993, IDT)
MS ISO 6196-5:2005 Micrographics - Vocabulary - Part 5: Quality of images, legibility, inspection (ISO
3722 34 RM 45.00
(CONFIRMED:2015) 6196-5:1987, IDT)
MS ISO 6199:2005 Micrographics - Microfilming of documents on 16 mm and 35 mm Silver-gelatin
3723 30 RM 45.00
(CONFIRMED:2015) type microfilm - Operating procedures (ISO 6199:2005, IDT)
MS ISO 6200:2005 Micrographics - First generation silver-gelatin microforms of source documents
3724 13 RM 15.00
(CONFIRMED:2015) - Density specifications and method of measurement (ISO 6200:1999, IDT)
CHEMICAL PRODUCTS FOR INDUSTRIAL USE – SAMPLING – VOCABULARY (ISO
3725 MS ISO 6206 : 2003 17 RM 30.00
6206:1979, IDT)
PERFORMANCE STANDARDS IN BUILDING - CONTENTS AND PRESENTATION (ISO
3726 MS ISO 6240:2011 11 RM 15.00
6240:1980, IDT)
PERFORMANCE STANDARDS IN BUILDING - PRINCIPLES FOR THEIR
3727 MS ISO 6241:2011 19 RM 30.00
PREPARATION AND FACTORS TO BE CONSIDERED (ISO 6241:1984, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3753 MS ISO 6497:2005 ANIMAL FEEDING STUFFS - SAMPLING (ISO 6497:2002, IDT) 29 RM 45.00
ANIMAL FEEDING STUFFS - PREPARATION OF TEST SAMPLES (FIRST REVISION)
3754 MS ISO 6498 : 2000 16 RM 30.00
(ISO 6498 : 1998, IDT)
MS ISO 6502:2002
3755 Rubber - Guide to the use of curemeters (ISO 6502:1999, IDT) 30 RM 45.00
(CONFIRMED:2012)
RUBBER, VULCANIZED OR THERMOPLASTIC – DETERMINATION OF TENDENCY
3756 MS ISO 6505:2007 24 RM 30.00
TO ADHERE TO AND CORRODE METALS (ISO 6505:2005, IDT)
Metallic materials - Brinell hardness test - Part 1: Test method (First revision)
3757 MS ISO 6506-1:2017 24 RM 30.00
(ISO 6506-1:2014, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3764 MS ISO 6507-1:2001 METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1 : TEST METHOD 117 RM 165.00
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3 : CALIBRATION OF
3765 MS ISO 6507-3 : 2001 14 RM 15.00
REFERENCE BLOCKS
METALLIC MATERIALS - VICKERS HARDNESS TEST PART 2 : VERIFICATION OF
3766 MS ISO 6507-2 : 2001 19 RM 30.00
TESTING MACHINES
Metallic materials - Vickers hardness test - Part 1: Test method (First revision)
3767 MS ISO 6507-1:2012 28 RM 45.00
(ISO 6507-1:2005, IDT)
Metallic materials - Vickers hardness test - Part 2: Verification and calibration of
3768 MS ISO 6507-2:2012 25 RM 30.00
testing machines (First revision) (ISO 6507-2:2005, IDT)
Metallic materials - Vickers hardness test - Part 3: Calibration of reference
3769 MS ISO 6507-3:2012 18 RM 30.00
blocks (First revision) (ISO 6507-3:2005, IDT)
Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
3770 MS ISO 6507-4:2012 90 RM 135.00
(ISO 6507-4:2005, IDT)
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration
3771 MS ISO 6508-2:2017 32 RM 45.00
of testing machines and indenters (Second revision) (ISO 6508-2:2015, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3781 MS ISO 6568 : 1997 NATURAL GAS - SIMPLE ANALYSIS BY GAS CHROMATOGRAPHY 12 RM 15.00
MS ISO 6570:2003 NATURAL GAS –DETERMINATION OF POTENTIAL HYDROCARBON LIQUID
3782 34 RM 45.00
(CONFIRMED:2008) CONTENT – GRAVIMETRIC METHODS (FIRST REVISION) (ISO 6570:2001, IDT)
PAPER, BOARD AND PULPS - DETERMINATION OF CONDUCTIVITY OF AQUEOUS
3783 MS ISO 6587 : 1999 12 RM 15.00
EXTRACTS (ISO 6587 : 1992, IDT)
PAPER, BOARD AND PULPS - DETERMINATION OF pH OF AQUEOUS EXTRACTS -
3784 MS ISO 6588-1:2006 17 RM 30.00
PART 1: COLD EXTRACTION (ISO 6588-1:2005, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3795 MS ISO 6647:1998 RICE - DETERMINATION OF AMYLOSE CONTENT (ISO 6647:1987, IDT) 13 RM 15.00
ANIMAL FEEDING STUFFS - SEMI QUANTITATIVE DETERMINATION OF
3796 MS ISO 6651:2010 AFLATOXIN B1 - THIN LAYER CHROMATOGRAPHIC METHODS (FIRST REVISION) 24 RM 30.00
(ISO 6651: 2001, IDT)
MS ISO 6654:1996 ANIMAL FEEDING STUFFS - DETERMINATION OF UREA CONTENT (ISO
3797 11 RM 15.00
(CONFIRMED:2011) 6654:1991, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3804 MS ISO 6762 : 2002 TYRE VALVE – ISO CORE CHAMBER NO. 2 (ISO 6762:1982, IDT) 10 RM 15.00
FLAT PALLETS FOR INTERCONTINENTAL MATERIALS HANDLING - PRINCIPAL
3805 MS ISO 6780:2008 23 RM 30.00
DIMENSIONS AND TOLERANCES (ISO 6780:2003, IDT)
MS ISO 6803:2009 Rubber or thermoplastics hoses and hose assemblies - Hydraulic-pressure
3806 13 RM 15.00
(CONFIRMED:2013) impulse test without flexing (ISO 6803:2008, IDT)
RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-
3807 MS ISO 6804:2010 MACHINES AND DISHWASHERS - SPECIFICATION (FIRST REVISION) (ISO 21 RM 30.00
6804:2009, IDT)
RUBBER HOSES AND HOSE ASSEMBLIES FOR ROTARY DRILLING AND VIBRATION
3808 MS ISO 6807:2007 23 RM 30.00
APPLICATIONS – SPECIFICATION (ISO 6807:2003, IDT)
MS ISO 6813:2008
3809 Road vehicles - Collision classification - Terminology (ISO 6813:1998, IDT) 19 RM 30.00
(CONFIRMED:2016)
MS ISO 6830:2004 Iron ores - Determination of aluminium content - EDTA titrimetric method (ISO
3810 18 RM 30.00
(CONFIRMED:2013) 6830:1986, IDT)
SURFACE ACTIVE AGENTS - TECHNICAL STRAIGHT-CHAIN SODIUM
3811 MS ISO 6841:2010 ALKYLBENZENESULFONATES - DETERMINATION OF MEAN RELATIVE 14 RM 15.00
MOLECULAR MASS BY GAS-LIQUID CHROMATOGRAPHY (ISO 6841:1988, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3819 MS ISO 6892 : 2002 METALLIC MATERIAL - TENSILE TESTING AT AMBIENT TEMPERATURE 56 RM 90.00
Metallic materials - Tensile testing - Part 2: Method of test at elevated
3820 MS ISO 6892-2:2015 29 RM 45.00
temperature (First revision) (ISO 6892-2:2011, IDT)
Metallic materials - Tensile testing - Part 1: Method of test at room
3821 MS ISO 6892-1:2017 89 RM 135.00
temperature (First revision) (ISO 6892-1:2016, IDT)
RUBBER , VULCANIZED OR THERMOPLASTIC - DETERMINATION OF AGEING
3822 MS ISO 6914:2010 CHARACTERISTICS BY MEASUREMENT OF STRESS RELAXATION IN TENSION 18 RM 30.00
(FIRST REVISION) (ISO 6914:2008, IDT)
3823 MS ISO 6929:2007 STEEL PRODUCTS - DEFINITIONS AND CLASSIFICATION (ISO 6929:1987, IDT) 31 RM 45.00
3824 MS ISO 6929:2018 Steel products - Vocabulary (First revision) (ISO 6929:2013, IDT) 48 RM 75.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 7091:2006
3836 PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C (ISO 7091:2000, IDT) 13 RM 15.00
(CONFIRMED:2011)
MS ISO 7092:2006
3837 PLAIN WASHERS - SMALL SERIES - PRODUCT GRADE A (ISO 7092:2000, IDT) 14 RM 15.00
(CONFIRMED:2011)
MS ISO 7093-1:2006 PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A (ISO 7093-
3838 14 RM 15.00
(CONFIRMED:2011) 1:2000, IDT)
MS ISO 7094:2006 PLAIN WASHERS – EXTRA LARGE SERIES – PRODUCT GRADE C (ISO 7094:2000,
3839 13 RM 15.00
(CONFIRMED:2011) TECHNICAL CORRIGENDUM 1:2000, IDT)
PLASTICS - THERMOGRAVIMETRY OF POLYMERS - TEMPERATURE SCANNING
3840 MS ISO 7111 : 1998 13 RM 15.00
METHOD
AIR QUALITY - EXCHANGE OF DATA - PART 2: CONDENSED DATA FORMAT (ISO
3841 MS ISO 7168-2:2010 33 RM 45.00
7168-2:1999, IDT)
AIR QUALITY - EXCHANGE OF DATA - PART 1: GENERAL DATA FORMAT (ISO
3842 MS ISO 7168-1:2010 59 RM 90.00
7168-1:1999, IDT)
Furniture - Storage units - Determination of strength and durability (ISO
3843 MS ISO 7170:2012 43 RM 60.00
7170:2005, IDT)
MS ISO 7176-10:2010 Wheelchairs - Part 10: Determination of obstacle-climbing ability of electrically
3844 16 RM 30.00
(CONFIRMED:2015) powered wheelchairs (ISO 7176-10:2008, IDT)
MS ISO 7176-5:2010 Wheelchairs - Part 5: Determination of dimensions, mass and manoeuvring
3845 90 RM 135.00
(CONFIRMED:2015) space (ISO 7176-5:2008, IDT)
MS ISO 7176-4:2010 Wheelchairs - Part 4: Energy consumption of electric wheelchairs and scooters
3846 19 RM 30.00
(CONFIRMED:2015) for determination of theoretical distance range (ISO 7176-4:2008, IDT)
Wheelchairs - Part 21: Requirements and test methods for electromagnetic
MS ISO 7176-21:2010
3847 compatibility of electrically powered wheelchairs and scooters, and battery 31 RM 45.00
(CONFIRMED:2015)
chargers (ISO 7176-21:2009, IDT)
3848 MS ISO 7176-22:2011 Wheelchairs - Part 22: Set-up procedures (ISO 7176-22:2000, IDT) 22 RM 30.00
WHEELCHAIRS - PART 9: CLIMATIC TESTS FOR ELECTRIC WHEELCHAIRS (ISO
3849 MS ISO 7176-9:2010 20 RM 30.00
7176-9:2009, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3850 MS ISO 7176-26:2010 WHEELCHAIRS - PART 26: VOCABULARY (ISO 7176-26:2007, IDT) 51 RM 75.00
MS ISO 7176-19:2010 Wheelchairs - Part 19: Wheeled mobility devices for use as seats in motor
3851 54 RM 75.00
(CONFIRMED:2015) vehicles (ISO 7176-19:2008, IDT)
Implants for surgery - Components for partial and total knee joint prostheses -
MS ISO 7207-1:2010
3852 Part 1: Classification, definitions and designation of dimensions (ISO 7207- 25 RM 30.00
(CONFIRMED:2015)
1:2007, IDT)
MS ISO 7211-2:2003 Textiles - Woven fabrics - Construction - Methods of analysis - Part 2:
3853 14 RM 15.00
(CONFIRMED:2015) Determination of number of threads per unit length (ISO 7211-2:1984, IDT)
3854 MS ISO 7213 : 2001 PULPS – SAMPLING FOR TESTING (ISO 7213 - 1981, IDT) 9 RM 15.00
3855 MS ISO 7225:2006 GAS CYLINDERS – PRECAUTIONARY LABELS (ISO 7225:2005, IDT) 16 RM 30.00
MS ISO 7233:2008 Rubber and plastics hoses and hose assemblies - Determination of resistance to
3856 17 RM 30.00
(CONFIRMED:2013) vacuum (ISO 7233:2006, IDT)
HOT ENVIRONMENTS - ESTIMATION OF THE HEAT STRESS ON WORKING MAN,
3857 MS ISO 7243:2009 BASED ON THE WBGT-INDEX (WET BULB GLOBE TEMPERATURE) (ISO 15 RM 15.00
7243:1989, IDT)
BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN(ISO
3858 MS ISO 7250:2003 33 RM 45.00
7250:1996, IDT)
MS ISO 7250-1:2008 Basic human body measurements for technological design - Part 1: Body
3859 38 RM 60.00
(CONFIRMED:2013) measurement definitions and landmarks (First revision) (ISO 7250-1:2008, IDT)
Corrugating medium - Determination of the flat crush resistance after
3860 MS ISO 7263:2012 17 RM 30.00
laboratory fluting (First revision) (ISO 7263:2011, IDT)
RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER
3861 MS ISO 7326:2007 18 RM 30.00
STATIC CONDITIONS (ISO 7326:2006, IDT)
THERMAL INSULATION – PHYSICAL QUANTITIES AND DEFINITIONS (ISO
3862 MS ISO 7345 : 2003 17 RM 30.00
7345:1987, IDT)
3863 MS ISO 7348:2008 PACKAGING - GLASS CONTAINERS - VOCABULARY (ISO 7348:1992, IDT) 154 RM 225.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 7376:2011 Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation
3864 36 RM 60.00
(CONFIRMED:2015) (ISO 7376:2009, IDT)
PLASTICS – POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS –
3865 MS ISO 7391-2:2007 PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF 17 RM 30.00
PROPERTIES (FIRST REVISION) (ISO 7391-2:2006, IDT)
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1:
3866 MS ISO 7391-1:2012 Designation system and basis for specifications (First revision) (ISO 7391- 15 RM 15.00
1:2006, IDT)
MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR
3867 MS ISO 7396-1:2010 COMPRESSED MEDICAL GASES AND VACUUM (FIRST REVISION) (ISO 7396- 154 RM 225.00
1:2007, IDT)
MS ISO 7396-2:2010 Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal
3868 57 RM 90.00
(CONFIRMED:2015) systems (First revision) (ISO 7396-2:2007, IDT)
3869 MS ISO 7438:2017 Metallic materials - Bend test (First revision) 16 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3890 MS ISO 7864:2011 Sterile hypodermic needles for single use (ISO 7864:1993, IDT) 21 RM 30.00
CONTROL CHARTS – GENERAL GUIDE AND INTRODUCTION (ISO 7870 : 1993 ,
3891 MS ISO 7870 : 2000 21 RM 30.00
IDT)
WATER QUALITY – DETERMINATION OF ELECTRICAL CONDUCTIVITY (ISO
3892 MS ISO 7888:2005 14 RM 15.00
7888:1985, IDT)
STEEL WIRE AND WIRE PRODUCTS FOR FENCES - ZINC- AND ZINC-ALLOY-
3893 MS ISO 7900:2011 14 RM 15.00
COATED STEEL BARBED WIRE (ISO 7900:2006, IDT)
ERGONOMICS OF THE THERMAL ENVIRONMENT - ANALYTICAL
3894 MS ISO 7933:2007 DETERMINATION AND INTERPRETATION OF HEAT STRESS USING CALCULATION 44 RM 60.00
OF THE PREDICTED HEAT STRAIN (ISO 7933:2004, IDT)
STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS
3895 MS ISO 7934:2010 CONCENTRATION OF SULFUR DIOXIDE - HYDROGEN PEROXIDE/BARIUM 16 RM 30.00
PERCHLORATE/THORIN METHOD (ISO 7934:1989, AMD. 1:1998, IDT)
STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS
3896 MS ISO 7935:2011 CONCENTRATION OF SULFUR DIOXIDE - PERFORMANCE CHARACTERISTICS OF 21 RM 30.00
AUTOMATED MEASURING METHODS (ISO 7935:1992, IDT)
PACKAGING – SACKS – DROP TEST – PART 1: PAPER SACKS (ISO 7965-1:1984,
3897 MS ISO 7965-1:2005 16 RM 30.00
IDT)
PACKAGING – SACKS – DROP TEST – PART 2: SACKS MADE FROM
3898 MS ISO 7965-2:2005 19 RM 30.00
THERMOPLASTIC FLEXIBLE FILM (ISO 7965-2:1993, IDT)
3899 MS ISO 7966: 2000 ACCEPTANCE CONTROL CHARTS (ISO 7966 : 1993, IDT) 33 RM 45.00
OPHTHALMIC OPTICS - SPECTACLE FRAMES - LISTS OF EQUIVALENT TERMS AND
3900 MS ISO 7998:2008 39 RM 60.00
VOCABULARY (ISO 7998:2005, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 8308:2008 Rubber and plastics hoses and tubing - Determination of transmission of liquids
3927 18 RM 30.00
(CONFIRMED:2013) through hose and tubing walls (ISO 8308:2006, IDT)
MS ISO 8316:2006 Measurement of liquid flow in closed conduits - method by collection of the
3928 32 RM 45.00
(CONFIRMED:2012) liquid in a volumetric tank (ISO 8316:1987, IDT)
CHILD-RESISTANT PACKAGING – REQUIREMENTS AND TESTING PROCEDURES
3929 MS ISO 8317 : 2007 24 RM 30.00
FOR RECLOSABLE PACKAGES (FIRST REVISION) (ISO 8317:2003, IDT)
MS ISO 8318:2002 Packaging - Complete, filled transport packages and unit loads - Sinusoidal
3930 14 RM 15.00
(CONFIRMED:2012) vibration tests using a variable frequency (ISO 8318:2000(E), IDT)
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - VOCABULARY (FIRST
3931 MS ISO 8330:2008 50 RM 75.00
REVISION) (ISO 8330:2007, IDT)
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR
3932 MS ISO 8331:2007 SELECTION, STORAGE, USE AND MAINTENANCE (FIRST REVISION) (ISO 22 RM 30.00
8331:2007, IDT)
PACKAGING – METHOD OF SPECIFICATION FOR SACKS – PART 1: PAPER SACKS
3933 MS ISO 8351-1:2005 13 RM 15.00
(ISO 8351-1:1994, IDT)
PACKAGING – METHOD OF SPECIFICATION FOR SACKS – PART 2: SACKS MADE
3934 MS ISO 8351-2:2005 12 RM 15.00
FROM THERMOPLASTIC FLEXIBLE FILM (ISO 8351-2:1994, IDT)
MS ISO 8359:2008 Oxygen concentrators for medical use - Safety requirements (ISO 8359:1996,
3935 36 RM 60.00
(CONFIRMED:2013) IDT)
PACKAGING – DIMENSIONAL TOLERANCES FOR GENERAL PURPOSE SACKS –
3936 MS ISO 8367-1:2005 10 RM 15.00
PART 1: PAPER SACKS (ISO 8367-1:1993, IDT)
PACKAGING – DIMENSIONAL TOLERANCES FOR GENERAL PURPOSE SACKS –
3937 MS ISO 8367-2:2005 PART 2: SACKS MADE FROM THERMOPLASTIC FLEXIBLE FILM (ISO 8367-2:1993, 11 RM 15.00
IDT)
MS ISO 8370-1:2009 Belt drives - Dynamic test to determine pitch zone location - Part 1: V-belts (ISO
3938 14 RM 15.00
(CONFIRMED:2016) 8370-1:1993, IDT)
MS ISO 8370-2:2009 Belt drives - Dynamic test to determine pitch zone location - Part 2: V-ribbed
3939 13 RM 15.00
(CONFIRMED:2016) belts (ISO 8370-2:1993, IDT)
CERAMIC COOKWARE IN CONTACT WITH FOOD – RELEASE OF LEAD AND
3940 MS ISO 8391-2:2005 9 RM 15.00
CADMIUM – PART 2: PERMISSIBLE LIMITS (ISO 8391-2:1986, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3971 MS ISO 8836:2010 SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT (ISO 8836:2007, IDT) 23 RM 30.00
ROAD VEHICLES - ALTERNATORS WITH REGULATORS - TEST METHODS AND
3972 MS ISO 8854:2009 12 RM 15.00
GENERAL REQUIREMENTS (FIRST REVISION) (ISO 8854:1988, IDT)
Information technology - 8-bit single-byte coded graphic character sets - Part 6:
3973 MS ISO/IEC 8859-6:2012 20 RM 30.00
Latin/Arabic alphabet (ISO/IEC 8859-6:1999, IDT)
Ophthalmic optics - Uncut finished spectacle lenses - Part 5: Minimum
MS ISO 8980-5:2010
3974 requirements for spectacle lens surfaces claimed to be abrasion-resistant (ISO 16 RM 30.00
(CONFIRMED:2015)
8980-5:2005, IDT)
OPHTHALMIC OPTICS - UNCUT FINISHED SPECTACLE LENSES - PART 2:
3975 MS ISO 8980-2:2009 18 RM 30.00
SPECIFICATIONS FOR PROGRESSIVE POWER LENSES (ISO 8980-2:2004, IDT)
OPHTHALMIC OPTICS - UNCUT FINISHED SPECTACLE LENSES - PART 1:
3976 MS ISO 8980-1:2010 SPECIFICATIONS FOR SINGLE-VISION AND MULTIFOCAL LENSES (ISO 8980- 17 RM 30.00
1:2004, IDT)
OPHTHALMIC OPTICS - UNCUT FINISHED SPECTACLE LENSES - PART 3:
3977 MS ISO 8980-3:2010 23 RM 30.00
TRANSMITTANCE SPECIFICATIONS AND TEST METHODS (ISO 8980-3:2003, IDT)
MS ISO 8985:2000 PLASTICS – ETHYLENE/VINYL ACETATE COPOLYMER (EVAC) THERMOPLASTICS –
3978 28 RM 45.00
(CONFIRMED:2009) DETERMINATION OF VINYL ACETATE CONTENT (ISO 8985 : 1998, IDT)
3979 MS ISO 8995:2005 LIGHTING OF INDOOR WORK PLACES (ISO 8995:2002, IDT) 30 RM 45.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
3983 MS ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (Second revision) 60 RM 90.00
Sistem pengurusan kualiti - Asas dan kosa kata (Semakan pertama) (ISO
3984 MS ISO 9000:2005 (BM) 46 RM 75.00
9000:2005, IDT) (Diterbitkan oleh Jabatan Standard Malaysia pada tahun 2014)
Sistem Pengurusan Kualiti - Keperluan (Semakan Kedua) (ISO 9001:2015, IDT)
3985 MS ISO 9001:2015 (BM) 48 RM 75.00
(Diterbitkan oleh Jabatan Standard Malaysia pada tahun 2017)
SISTEM PENGURUSAN KUALITI - KEPERLUAN (SEMAKAN PERTAMA)(ISO
3986 MS ISO 9001:2008 (BM) 9001:2008, IDT)(DITERBITKAN OLEH JABATAN STANDARD MALAYSIA PADA 48 RM 75.00
TAHUN 2010)
QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (FIRST REVISION) (ISO
3987 MS ISO 9001:2008 39 RM 60.00
9001:2008, IDT) (PUBLISHED BY STANDARDS MALAYSIA IN 2009)
Quality management systems - Requirements (Second revision) (ISO 9001:2015,
3988 MS ISO 9001:2015 43 RM 60.00
IDT)
Quality management systems - Guidelines for the application of ISO 9001:2015
3989 MS ISO/TS 9002:2016 56 RM 90.00
(ISO/TS 9002:2016, IDT) (Published by Standards Malaysia in 2017)
MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY
3990 MS ISO 9004:2009 MANAGEMENT APPROACH (FIRST REVISION)(ISO 9004:2009, IDT)(PUBLISHED 57 RM 90.00
BY STANDARDS MALAYSIA IN 2010)
3991 MS ISO 9010:2010 SYNCHRONOUS BELT DRIVES - AUTOMOTIVE BELTS (ISO 9010:1997, IDT) 21 RM 30.00
3992 MS ISO 9011:2010 SYNCHRONOUS BELT DRIVES - AUTOMOTIVE PULLEYS (ISO 9011:1997, IDT) 17 RM 30.00
OPTICS AND OPTICAL INSTRUMENTS - ENVIRONMENTAL TEST METHODS - PART
3993 MS ISO 9022-8:2010 16 RM 30.00
8: HIGH PRESSURE, LOW PRESSURE, IMMERSION (ISO 9022-8:1994, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
TUBULAR TIPS FOR HAND-HELD TECHNICAL PENS USING INDIA INK ON TRACING
MS ISO 9175-1:2003
4007 PAPER PART 1: DEFINITIONS, DIMENSIONS, DESIGNATION AND MARKING (ISO 11 RM 15.00
(CONFIRMED:2012)
9175-1:1988, IDT)
MS ISO 9177-2:2003 MECHANICAL PENCILS - PART 2: BLACK LEADS - CLASSIFICATION AND
4008 9 RM 15.00
(CONFIRMED:2012) DIMENSIONS (ISO 9177-2:1989, IDT)
MS ISO 9177-1:2003 Mechanical pencils - Part 1: Classification, dimensions, performance
4009 14 RM 15.00
(CONFIRMED:2012) requirements and testing (ISO 9177-1:1989, IDT)
MS ISO 9177-3:2003 Mechanical pencils - Part 3: black leads - bending strengths of HB leads (ISO
4010 12 RM 15.00
(CONFIRMED:2012) 9177-3:1994, IDT)
MS ISO 9180:2003 Black leads for wood-cased pencils - classification and diameters (ISO
4011 10 RM 15.00
(CONFIRMED:2012) 9180:1988, IDT)
PAPER, BOARD AND PULPS - DETERMINATION OF WATER-SOLUBLE CHLORIDES
4012 MS ISO 9197:2007 15 RM 15.00
(ISO 9197:2006, IDT)
PAPER, BOARD AND PULP - DETERMINATION OF WATER-SOLUBLE SULFATES
4013 MS ISO 9198:2005 14 RM 15.00
(ISO 9198:2001, IDT)
4014 MS ISO 9202:2006 JEWELLERY - FINENESS OF PRECIOUS METAL ALLOYS (ISO 9202:1991, IDT) 10 RM 15.00
4015 MS ISO 9227 : 1996 CORROSION TESTS IN ARTIFICIAL ATMOSHPERES – SALT SPRAY TESTS 23 RM 30.00
Ergonomics of human-system interaction - Part 420: Selection of physical input
4016 MS ISO 9241-420:2012 103 RM 150.00
devices (ISO 9241-420:2011, IDT)
ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY
4017 MS ISO 9241-1:2005 TERMINALS (VDTs) – PART 1: GENERAL INTRODUCTION(ISO 9241-1:1997 AND 34 RM 45.00
ITS AMENDMENT1:2001, IDT)
ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY
4018 MS ISO 9241-2:2005 TERMINALS (VDTs) – PART 2: GUIDANCE ON TASK REQUIREMENTS (ISO 9241- 13 RM 15.00
2:1992, IDT)
ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY
4019 MS ISO 9241-6:2005 TERMINALS (VDTs) – PART 6: GUIDANCE ON THE WORK ENVIRONMENT (ISO 42 RM 60.00
9241-6:1999, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 9355-2:2003 Ergonomic requirements for the design of displays and control actuators - Part
4057 28 RM 45.00
(CONFIRMED:2013) 2: Displays (ISO 9355-2:1999, IDT)
AIR QUALITY - STRATIFIED SAMPLING METHOD FOR ASSESSMENT OF AMBIENT
4058 MS ISO 9359:2009 23 RM 30.00
AIR QUALITY (ISO 9359:1989, IDT)
ANAESTHETIC AND RESPIRATORY EQUIPMENT - HEAT AND MOISTURE
EXCHANGERS (HMEs) FOR HUMIDIFYING RESPIRED GASES IN HUMANS - PART
4059 MS ISO 9360-2:2008 17 RM 30.00
2: HMEs FOR USE WITH TRACHEOSTOMIZED PATIENTS HAVING MINIMUM
TIDAL VOLUMES OF 250 ML (ISO 9360-2:2001, IDT)
ANAESTHETIC AND RESPIRATORY EQUIPMENT - HEAT AND MOISTURE
EXCHANGERS (HMEs) FOR HUMIDIFYING RESPIRED GASES IN HUMANS - PART
4060 MS ISO 9360-1:2008 29 RM 45.00
1: HMEs FOR USE WITH MINIMUM TIDAL VOLUMES OF 250 ml (ISO 9360-
1:2000, IDT)
Measurement of liquid flow in closed conduits by the weighing method -
MS ISO 9368-1:2006
4061 procedures for checking installation - Part 1: Static weighing systems (ISO 9368- 29 RM 45.00
(CONFIRMED:2012)
1:1990, IDT)
4062 MS ISO 9413 : 2002 TYRE VALVES – DIMENSIONS AND DESIGNATION (ISO 9413:1998, IDT) 87 RM 135.00
PAPER - DETERMINATION OF LIGHT SCATTERING AND ABSORPTION
4063 MS ISO 9416:2010 20 RM 30.00
COEFFICIENTS (USING KUBELKA-MUNK THEORY) (ISO 9416:2009, IDT)
SOFT SOLDERING FLUXES - TEST METHODS - PART 1: DETERMINATION OF NON-
4064 MS ISO 9455-1:2009 12 RM 15.00
VOLATILE MATTER, GRAVIMETRIC METHOD (ISO 9455-1:1990, IDT)
SOFT SOLDERING FLUXES - TEST METHODS - PART 3: DETERMINATION OF ACID
4065 MS ISO 9455-3:2009 VALUE, POTENTIOMETRIC AND VISUAL TITRATION METHODS (ISO 9455-3:1992, 14 RM 15.00
IDT)
SOFT SOLDERING FLUXES - TEST METHODS - PART 5: COPPER MIRROR TEST (ISO
4066 MS ISO 9455-5:2009 13 RM 15.00
9455-5:1992, IDT)
SOFT SOLDERING FLUXES - TEST METHODS - PART 6: DETERMINATION AND
4067 MS ISO 9455-6:2009 DETECTION OF HALIDE (EXCLUDING FLUORIDE) CONTENT (ISO 9455-6:1995, 20 RM 30.00
IDT)
SOFT SOLDERING FLUXES - TEST METHODS - PART 2: DETERMINATION OF NON-
4068 MS ISO 9455-2:2009 15 RM 15.00
VOLATILE MATTER, EBULLIOMETRIC METHOD (ISO 9455-2:1993, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 9608:2009 V-belts - Uniformity of belts - Test method for determination of centre distance
4083 13 RM 15.00
(CONFIRMED:2016) variation (ISO 9608:1994, IDT)
V-BELTS - UNIFORMITY OF BELTS - TEST METHOD FOR DETERMINATION OF
4084 MS ISO 9608:2009, AMD 1: 2011 FREE 1 RM -
CENTRE DISTANCE VARIATION (ISO 9608:1994, IDT)
MS ISO 9626:2011 Stainless steel needle tubing for manufacture of medical devices (ISO
4085 24 RM 30.00
(CONFIRMED:2015) 9626:1991, AMD. 1:2001, IDT)
Information technology - Computer graphics - Interfacing techniques for
MS ISO/IEC 9636: PART 4:1993
4086 dialogues with graphical devices (CGI) - Functional specification - Part 4: 55 RM 75.00
(CONFIRMED:2015)
Segments
MS ISO/IEC 9636:1993 Information processing - Computer graphics - Interfacing techniques for
4087 63 RM 90.00
(CONFIRMED:2015) dialogues with graphical devices (CGI) - Functional specification - Part 6: Raster
MS ISO/IEC 9636: PART 2:1993 Information processing - Computer graphics - Interfacing techniques for
4088 58 RM 90.00
(CONFIRMED:2015) dialogues with graphical devices (cgi) - Functional specification - Part 2: Control
MS ISO/IEC 9636: PART 3:1993 Information technology - Computer graphics - Interfacing techniques for
4089 167 RM 240.00
(CONFIRMED:2015) dialogues with graphical devices (CGI) - Functional specification - Part 3: Output
Information technology - Computer graphics - Interfacing techniques for
MS ISO/IEC 9636: PART 1:1993
4090 dialogues with graphical devices (CGI) - Functional specification - Part 1: 97 RM 150.00
(CONFIRMED:2015)
Overview, profiles, and conformance
Information technology - Computer graphics - Interfacing techniques for
MS ISO/IEC 9636: PART 5:1993
4091 dialogues with graphical devices (CGI) - Functional specification - Part 5: Input 109 RM 165.00
(CONFIRMED:2015)
and echoing
Information technology - Computer graphics - Interfacing techniques for
MS ISO/IEC 9637-1:1996
4092 dialogues with graphical devices (CGI) - Data stream binding: Part 1: Character 75 RM 105.00
(CONFIRMED:2015)
encoding
Information technology - Computer graphics - Interfacing techniques for
MS ISO/IEC 9637-2:1996
4093 dialogues with graphical devices (CGI) - Data stream binding: Part 2: Binary 83 RM 120.00
(CONFIRMED:2015)
encoding
IRON ORES - DETERMINATION OF MANGANESE CONTENT - PART 1: FLAME
4094 MS ISO 9682-1:2011 ATOMIC ABSORPTION SPECTROMETRIC METHOD (FIRST REVISION) (ISO 9682- 23 RM 30.00
1:2009, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4147 MS EN 10080:2014 Steel for the reinforcement of concrete - Weldable reinforcing steel - General 76 RM 120.00
OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS
4148 MS ISO 10083:2008 55 RM 75.00
PIPELINE SYSTEMS (ISO 10083:2006, IDT)
MS ISO 10101-2:1997 Natural gas - Determination of water by the Karl Fischer method : Part 2:
4149 14 RM 15.00
(CONFIRMED:2012) Titration procedure
MS ISO 10101-3:1997 Natural gas - Determination of water by the karl fischer method - Part 3:
4150 13 RM 15.00
(CONFIRMED:2012) Coulometric procedure
MS ISO 10101-1:1997 Natural gas - Determination of water by the Karl Fischer method: Part 1:
4151 10 RM 15.00
(CONFIRMED:2012) Introduction
Optics and photonics - Environmental requirements - Part 8: Test requirements
4152 MS ISO 10109-8:2012 21 RM 30.00
for extreme conditions of use (ISO 10109-8:2005, IDT)
STATIONARY SOURCE EMISSIONS - AUTOMATED MONITORING OF MASS
4153 MS ISO 10155:2011 CONCENTRATIONS OF PARTICLES - PERFORMANCE CHARACTERISTICS, TEST 27 RM 45.00
METHODS AND SPECIFICATIONS (ISO 10155:1995, COR. 1:2002, IDT)
Hot finished structural hollow sections of non-alloy and fine grain steels - Part
4154 MS EN 10210-1:2017 44 RM 60.00
1: Technical delivery conditions
Hot finished structural hollow sections of non-alloy and fine grain steels - Part
4155 MS EN 10210-2:2017 37 RM 60.00
2: Tolerances, dimensions and sectional properties
Cold formed welded structural hollow sections of non-alloy and fine grain steels
4156 MS EN 10219-2:2015 42 RM 60.00
- Part 2 : Tolerances, dimensions and sectional properties
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Cold formed welded structural hollow sections of non-alloy and fine grain steels
4157 MS EN 10219-1:2015 42 RM 60.00
- Part 1: Technical delivery conditions
COPPER SULFIDE CONCENTRATES - DETERMINATION OF COPPER CONTENT -
4158 MS ISO 10258:2005 26 RM 45.00
TITRIMETRIC METHODS (ISO 10258:1994, IDT)
Transportable gas cylinders - Cylinder valves - Specification and type testing
4159 MS ISO 10297:2012 36 RM 60.00
(ISO 10297:2006, IDT)
4160 MS ISO 10319:2005 GEOTEXTILES - WIDE-WIDTH TENSILE TEST (ISO 10319:1993, IDT) 17 RM 30.00
OPHTHALMIC OPTICS - SEMI-FINISHED SPECTACLE LENS BLANKS - PART 2:
4161 MS ISO 10322-2:2009 SPECIFICATIONS FOR PROGRESSIVE POWER LENS BLANKS (ISO 10322-2:2006, 18 RM 30.00
IDT)
OPHTHALMIC OPTICS - SEMI-FINISHED SPECTACLE LENS BLANKS - PART 1:
4162 MS ISO 10322-1:2009 SPECIFICATIONS FOR SINGLE-VISION AND MULTIFOCAL LENS BLANKS (ISO 19 RM 30.00
10322-1:2006, IDT)
4163 MS ISO 10341:2012 Ophthalmic instruments - Refractor heads (ISO 10341:2009,IDT) 16 RM 30.00
4164 MS ISO 10342:2012 Ophthalmic instruments - Eye refractometers (ISO 10342:2010, IDT) 14 RM 15.00
4165 MS ISO 10343:2012 Ophthalmic instruments - Ophthalmometers (ISO 10343:2009, IDT) 15 RM 15.00
STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE)
4166 MS ISO 10364:2008 17 RM 30.00
OF MULTI-COMPONENT ADEDHESIVES (ISO 10364:2007, IDT)
4167 MS ISO 10365:2008 ADHESIVES - DESIGNATION OF MAIN FAILURE PATTERNS (ISO 10365:1992, IDT) 12 RM 15.00
PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - MICRO
4168 MS ISO 10370:2009 18 RM 30.00
METHOD (ISO 10370:1993, IDT)
4169 MS ISO/IEC 10373:1995 IDENTIFICATION CARDS – TEST METHODS(ISO/IEC 10373:1993, IDT) 44 RM 60.00
FREIGHT CONTAINERS - AUTOMATIC IDENTIFICATION (ISO 10374:1991 AND
4170 MS ISO 10374:2005 24 RM 30.00
AMENDMENT 1: 1995, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 10374:2005, AMD. FREIGHT CONTAINERS - AUTOMATIC IDENTIFICATION (ISO 10374:1991 and
4171 25 RM 30.00
1:2012 Amendment 1: 1995, IDT)
COPPER SULFIDE CONCENTRATES - DETERMINATION OF GOLD AND SILVER
4172 MS ISO 10378:2005 CONTENTS - FIRE ASSAY GRAVIMETRIC AND ATOMIC ABSORPTION 37 RM 60.00
SPECTROMETRIC METHOD (ISO 10378:1994, IDT)
ROAD VEHICLES WITH TWO AXLES - DETERMINATION OF CENTRE OF GRAVITY
4173 MS ISO 10392:2008 15 RM 15.00
(ISO 10392:1992, IDT)
STATIONARY SOURCE EMISSIONS - SAMPLING FOR THE AUTOMATED
4174 MS ISO 10396:2011 DETERMINATION OF GAS EMISSION CONCENTRATIONS FOR PERMANENTLY- 34 RM 45.00
INSTALLED MONITORING SYSTEMS (ISO 10396:2007, IDT)
ROAD VEHICLES – DRY IGNITION COILS USING ROTATING HIGH-VOLTAGE
4175 MS ISO 10455:2005 18 RM 30.00
DISTRIBUTOR (ISO 10455:1992, IDT)
MS ISO 10455:2005 Road vehicles- Dry ignition coils using rotating high-voltage distributor (ISO
4176 16 RM 30.00
(CONFIRMED:2012) 10455:1992, IDT)
Gas cylinders - Seamless aluminium-alloy gas cylinders - Periodic inspection and
4177 MS ISO 10461:2011 51 RM 75.00
testing (ISO 10461:2005, AMD. 1:2006, IDT)
CYLINDERS FOR DISSOLVED ACETYLENE-PERIODIC INSPECTION AND
4178 MS ISO 10462:2000 29 RM 45.00
MAINTENANCE
COPPER SULFIDES CONCENTRATES - DETERMINATION OF COPPER CONTENT -
4179 MS ISO 10469:2005 33 RM 45.00
ELECTROGRAVIMETRIC METHOD (ISO 10469:1994, IDT)
AMBIENT AIR - DETERMINATION OF SULFUR DIOXIDE - ULTRAVIOLET
4180 MS ISO 10498:2007 20 RM 30.00
FLUORESCENCE METHOD (ISO 10498:2004, IDT)
PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS -
4181 MS ISO 10508:2009 GUIDANCE FOR CLASSIFICATION AND DESIGN (FIRST REVISION) (ISO 18 RM 30.00
10508:2006, IDT)
4182 MS ISO 10510:2012 Tapping screw and washer assemblies with plain washers (ISO 10510:2011, IDT) 12 RM 15.00
MS ISO 10524-4:2010 Pressure regulators for use with medical gases - Part 4: Low-pressure regulators
4183 43 RM 60.00
(CONFIRMED:2015) (ISO 10524-4:2008, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 10524-1:2008 Pressure regulators for use with medical gases - Part 1: Pressure regulators and
4184 41 RM 60.00
(CONFIRMED:2013) pressure regulators with flow-metering devices (ISO 10524-1:2006, IDT)
MS ISO 10524-2:2008 Pressure regulators for use with medical gases - Part 2: Manifold and line
4185 40 RM 60.00
(CONFIRMED:2013) pressure regulators (ISO 10524-2:2005, IDT)
MS ISO 10524-3:2008 Pressure regulators for use with medical gases - Part 3: Pressure regulators
4186 45 RM 60.00
(CONFIRMED:2013) integrated with cylinder valves (ISO 10524-3:2005, IDT)
PACKAGING – COMPLETE, FILLED TRANSPORT PACKAGES – STABILITY TESTING
4187 MS ISO 10531 : 2000 17 RM 30.00
OF UNIT LOADS (ISO 10531 : 1992, IDT)
ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF PHOSPHORUS
4188 MS ISO 10540-2:2011 CONTENT - PART 2: METHOD USING GRAPHITE FURNACE ATOMIC ABSORPTION 16 RM 30.00
SPECTROMETRY (ISO 10540-2:2003, IDT)
ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF PHOSPHORUS
4189 MS ISO 10540-3:2011 CONTENT - PART 3: METHOD USING INDUCTIVELY COUPLED PLASMA (ICP) 16 RM 30.00
OPTICAL EMISSION SPECTROSCOPY (ISO 10540-3:2002, IDT)
ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF PHOSPHORUS
4190 MS ISO 10540-1:2011 18 RM 30.00
CONTENT - PART 1: COLORIMETRIC METHOD (ISO 10540-1:2003, IDT)
Ceramic tiles - Part 14: Determination of resistance to stains (First revision) (ISO
4191 MS ISO 10545-14:2018 19 RM 30.00
10545-14:2015, IDT)
Ceramic tiles - Part 9: Determination of resistance to thermal shock (First
4192 MS ISO 10545-9:2018 13 RM 15.00
revision) (ISO 10545-9:2013, IDT)
Ceramic tiles - Part 8: Determination of linear thermal expansion (First revision)
4193 MS ISO 10545-8:2018 13 RM 15.00
(ISO 10545-8:2014,IDT)
Ceramic tiles - Part 1: Sampling and basis for acceptance (First revision) (ISO
4194 MS ISO 10545-1:2018 19 RM 30.00
10545-1:2014, IDT)
MS ISO 10545-14:2001 CERAMIC TILES: PART 14: DETERMINATION OF RESISTANCE TO STAINS (ISO
4195 20 RM 30.00
(CONFIRMED:2006) 10545-14:1995, IDT)
CERAMIC TILES - PART 15 : DETERMINATION OF LEAD ANDCADMIUM GIVEN
4196 MS ISO 10545-15 : 2002 13 RM 15.00
OFF BY GLAZED TILES (ISO 10545-15:1995, IDT)
CERAMIC TILES - PART 1 : SAMPLING AND BASIS FOR ACCEPTANCE (ISO 10545-1
4197 MS ISO 10545-1 : 2002 17 RM 30.00
: 1995, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Ceramic tiles - Part 16: Determination of small colour differences (ISO 10545-
4198 MS ISO 10545-16:2013 14 RM 15.00
16:2010, IDT) (First revision)
MS ISO 10545-9:2001 CERAMIC TILES - PART 9 : DETERMINATION OF RESISTANCE TO THERMAL
4199 12 RM 15.00
(CONFIRMED:2008) SHOCK (ISO 10545-9 : 1994, IDT)
MS ISO 10545-11:2001 CERAMIC TILES - PART 11 : DETERMINATION OF CRAZING RESISTANCE FOR
4200 13 RM 15.00
(CONFIRMED:2008) GLAZED TILES (ISO 10545-11:1994, IDT)
MS ISO 10545-13:2001 CERAMIC TILES - PART 13 : DETERMINATION OF CHEMICAL RESISTANCE (ISO
4201 14 RM 15.00
(CONFIRMED:2008) 10545-13:1995, IDT)
MS ISO 10545-7:2001 CERAMIC TILES - PART 7 : DETERMINATION OF RESISTANCE TO SURFACE
4202 17 RM 30.00
(CONFIRMED:2008) ABRASION FOR GLAZED TILES (ISO 10545-7:1996, IDT)
MS ISO 10545-8:2001 CERAMIC TILES - PART 8 : DETERMINATION OF LINEAR THERMAL EXPANSION
4203 12 RM 15.00
(CONFIRMED:2008) (ISO 10545-8:1994, IDT)
MS ISO 10545-12:2001 CERAMIC TILES - PART 12 : DETERMINATION OF FROST RESISTANCE (ISO 10545-
4204 13 RM 15.00
(CONFIRMED:2008) 12:1995, IDT)
CERAMIC TILES - PART 4: DETERMINATION OF MODULUS OF RUPTURE AND
4205 MS ISO 10545-4:2003 17 RM 30.00
BREAKING STRENGTH (ISO 10545-4:1994, IDT)
MS ISO 10545-2:2002 CERAMIC TILES: PART 2: DETERMINATION OF DIMENSIONS AND SURFACE
4206 17 RM 30.00
(CONFIRMED:2006) QUALITY (ISO 10545-2:1995, IDT)
MS ISO 10545-3:2001 Ceramic tiles - Part 3 : Determination of water absorption, apparent porosity,
4207 13 RM 15.00
(CONFIRMED:2012) apparent relative density and bulk density (ISO 10545-3:1995, IDT)
MS ISO 10545-5:2002 Ceramic tiles - Part 5: Determination of impact resistance by measurement of
4208 17 RM 30.00
(CONFIRMED:2012) coefficient of restitution (ISO 10545-5:1996, IDT)
Ceramic tiles - Part 13: Determination of chemical resistance (First revision) (ISO
4209 MS ISO 10545-13:2018 20 RM 30.00
10545-13:2016, IDT)
MS ISO 10545-10:2002 CERAMIC TILES - PART 10: DETERMINATION OF MOISTURE EXPANSION (ISO
4210 13 RM 15.00
(CONFIRMED:2006) 10545-10:1995, IDT)
Ceramic tiles - Part 6: Determination of resistance to deep abrasion for
4211 MS ISO 10545-6:2013 13 RM 15.00
unglazed tiles (First revision) (ISO 10545-6:2010, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 11064-2:2003 Ergonomic design of control centres - Part 2: Principles for the arrangement of
4250 28 RM 45.00
(CONFIRMED:2013) control suites (ISO 11064-2:2000, IDT)
MS ISO 11064-3:2003 Ergonomic design of control centres - Part 3: Control room layout (ISO 11064-
4251 47 RM 75.00
(CONFIRMED:2013) 3:1999 and its Technical corrigendum 1:2002, IDT)
MS ISO 11064-1:2003 Ergonomic design of control centres - Part 1: Principles for the design of control
4252 44 RM 60.00
(CONFIRMED:2013) centres (ISO 11064-1:2000, IDT)
4253 MS ISO 11070:2011 Sterile, single-use intravascular catheter introducers (ISO 11070:1998, IDT) 32 RM 45.00
Ergonomics of the thermal environment - Determination and interpretation of
MS ISO 11079:2008
4254 cold stress when using required clothing insulation (IREQ) and local cooling 45 RM 60.00
(CONFIRMED:2013)
effects (ISO 11079:2007, IDT)
PAPER AND BOARD - TESTING OF CORES - PART 9: DETERMINATION OF FLAT
4255 MS ISO 11093-9:2007 14 RM 15.00
CRUSH RESISTANCE (ISO 11093-9:2006, IDT)
PAPER AND BOARD - TESTING OF CORES - PART 4: MEASUREMENT OF
4256 MS ISO 11093-4:2007 19 RM 30.00
DIMENSIONS (ISO 11093-4:1997, IDT)
PAPER AND BOARD - TESTING OF CORES - PART 2: CONDITIONING OF TEST
4257 MS ISO 11093-2:2007 12 RM 15.00
SAMPLES (ISO 11093-2:1994, IDT)
PAPER AND BOARD - TESTING OF CORES - PART 1: SAMPLING (ISO 11093-
4258 MS ISO 11093-1:2007 11 RM 15.00
1:1994, IDT)
PAPER AND BOARD - TESTING OF CORES - PART 3: DETERMINATION OF
4259 MS ISO 11093-3:2008 MOISTURE CONTENT USING THE OVEN DRYING METHOD (ISO 11093-3:1994, 11 RM 15.00
IDT)
PAPER AND BOARD - TESTING OF CORES - PART 7: DETERMINATION OF
4260 MS ISO 11093-7:2008 16 RM 30.00
FLEXURAL MODULUS BY THE THREE-POINT METHOD (ISO 11093-7:1997, IDT)
PAPER AND BOARD - TESTING OF CORES - PART 8: DETERMINATION OF
4261 MS ISO 11093-8:2008 NATURAL FREQUENCY AND FLEXURAL MODULUS BY EXPERIMENTAL MODAL 14 RM 15.00
ANALYSIS (ISO 11093-8:1997, IDT)
PAPER AND BOARD - TESTING OF CORES - PART 6: DETERMINATION OF
4262 MS ISO 11093-6:2008 14 RM 15.00
BENDING STRENGTH BY THE THREE-POINT METHOD (ISO 11093-6:2005, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4291 MS ISO 11197:2006 MEDICAL SUPPLY UNITS (ISO 11197:2004, IDT) 49 RM 75.00
DETERMINATION OF PLATINUM IN PLATINUM JEWELLERY ALLOYS -
MS ISO 11210:1997
4292 GRAVIMETRIC METOD AFTER PRECIPITATION OF DIAMMONIUM 11 RM 15.00
(CONFIRMED:2003)
HEXACHLOROPLATINATE
AIR QUALITY - DETERMINATION OF THE UNCERTAINTY OF THE TIME AVERAGE
4293 MS ISO 11222:2009 32 RM 45.00
OF AIR QUALITY MEASUREMENTS (ISO 11222:2002, IDT)
ERGONOMIC – EVALUATION OF STATIC WORKING POSTURES (ISO 11226:2000,
4294 MS ISO 11226:2003 31 RM 45.00
IDT)
Nanotechnologies - Characterization of volatile components in single-wall
4295 MS ISO/TS 11251:2012 carbon nanotube samples using evolved gas analysis/gas chromatograph-mass 18 RM 30.00
spectrometry (ISO/TS 11251:2010, IDT)
STATIONARY SOURCE EMISSIONS - DETERMINATION OF GAS AND PARTICLE-
4296 MS ISO 11338-2:2011 PHASE POLYCYCLIC AROMATIC HYDROCARBONS - PART 2: SAMPLE 32 RM 45.00
PREPARATION, CLEAN-UP AND DETERMINATION (ISO 11338-2:2003, IDT)
STATIONARY SOURCE EMISSIONS - DETERMINATION OF GAS AND PARTICLE-
4297 MS ISO 11338-1:2011 PHASE POLYCYCLIC AROMATIC HYDROCARBONS - PART 1: SAMPLING (ISO 34 RM 45.00
11338-1:2003, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 11424:2002 Rubber hoses and tubing for air and vacuum systems for internal-combustion
4310 18 RM 30.00
(CONFIRMED:2013) engines - Specification (ISO 11424:1996, IDT)
RUBBER HOSES AND HOSE ASSEMBLIES FOR AUTOMOTIVE POWER-STEERING
4311 MS ISO 11425:2004 16 RM 30.00
SYSTEMS - SPECIFICATION (ISO 11425:1996, IDT)
DETERMINATION OF GOLD IN GOLD JEWELLERY ALLOYS - CUPELLATION
4312 MS ISO 11426:2006 16 RM 30.00
METHOD (FIRE ASSAY ) (ISO 11426:1997, IDT)
DETERMINATION OF SILVER IN SILVER JEWELLERY ALLOYS - VOLUMETRIC
4313 MS ISO 11427:2010 (POTENTIOMETRIC) METHOD USING POTASSIUM BROMIDE (ISO 11427:1993, 14 RM 15.00
COR. 1:1994, IDT)
ERGONOMICS - VISUAL DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN
4314 MS ISO 11428:2009 15 RM 15.00
AND TESTING (ISO 11428:1996, IDT)
ERGONOMICS - SYSTEM OF AUDITORY AND VISUAL DANGER AND
4315 MS ISO 11429:2010 15 RM 15.00
INFORMATION SIGNALS (ISO 11429:1996, IDT)
Road vehicles - Component test methods for electrical disturbances from
MS ISO 11452-7:2009
4316 narrowband radiated electromagnetic energy - Part 7: Direct radio frequency 22 RM 30.00
(CONFIRMED:2016)
(RF) power injection (ISO 11452-7:2003, IDT)
ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL
4317 MS ISO 11452-2:2009 DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - 25 RM 30.00
PART 2: ABSORBER-LINED SHIELDED ENCLOSURE (ISO 11452-2:2004, IDT)
ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL
4318 MS ISO 11452-3:2009 DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - 28 RM 45.00
PART 3: TRANSVERSE ELECTROMAGNETIC (TEM) CELL (ISO 11452-3:2001, IDT)
ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL
4319 MS ISO 11452-4:2009 DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - 33 RM 45.00
PART 4: BULK CURRENT INJECTION (BCI) (ISO 11452-4:2005, IDT)
ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL
4320 MS ISO 11452-1:2009 DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - 30 RM 45.00
PART 1: GENERAL PRINCIPLES AND TERMINOLOGY (ISO 11452-1:2005, IDT)
ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL
4321 MS ISO 11452-8:2009 DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - 27 RM 45.00
PART 8: IMMUNITY TO MAGNETIC FIELDS (ISO 11452-8:2007, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4339 MS 11621:2008 (CONFIRMED:2015) Gas cylinders - Procedures for change of gas service (ISO 11621:1997, IDT) 23 RM 30.00
STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS
4340 MS ISO 11632:2009 CONCENTRATION OF SULFUR DIOXIDE - ION CHROMATOGRAPHY METHOD (ISO 25 RM 30.00
11632:1998 (2004), IDT)
MS ISO 11648-2:2004 Statistical aspects of sampling from bulk materials - Part 2: Sampling of
4341 115 RM 165.00
(CONFIRMED:2015) particulate materials (ISO 11648-2:2001, IDT)
PACKAGING – TACTILE WARNINGS OF DANGER – REQUIREMENTS (ISO 11683 :
4342 MS ISO 11683 : 2000 17 RM 30.00
1997, IDT)
MS ISO 11712:2011 Anaesthetic and respiratory equipment - Supralaryngeal airways and
4343 38 RM 60.00
(CONFIRMED:2015) connectors (ISO 11712:2009, IDT)
Sterilization of medical devices - Microbiological methods - Part 2: Tests of
4344 MS ISO 11737-2:2011 sterility performed in the definition, validation and maintenance of a 25 RM 30.00
sterilization process (ISO 11737-2:2009, IDT)
BELT DRIVE - V-RIBBED BELTS FOR THE AUTOMOTIVE INDUSTRY - FATIGUE TEST
4345 MS ISO 11749:2009 19 RM 30.00
(ISO 11749:1995, COR. 1:2003, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 12097-2:2008 Road vehicles - Airbag components - Part 2: Testing of airbag modules (ISO
4373 31 RM 45.00
(CONFIRMED:2013) 12097-2:1996, IDT)
ROAD VEHICLES - AIRBAG COMPONENTS - PART 3: TESTING OF INFLATOR
4374 MS ISO 12097-3:2008 36 RM 60.00
ASSEMBLIES (ISO 12097-3:2002; IDT)
ROAD VEHICLES - AIRBAG COMPONENTS - PART 1: VOCABULARY (ISO 12097-
4375 MS ISO 12097-1:2008 24 RM 30.00
1:2002, IDT)
Safety of machinery - General principles for design - Risk assessment and risk
4376 MS ISO 12100:2012, AMD. 1:2015 FREE 2 RM -
reduction (First revision) (ISO 12100:2010, IDT) AMENDMENT 1
Safety of machinery - General priciples for design - Risk assessment and risk
4377 MS ISO 12100:2012 87 RM 135.00
reduction (First revision) (ISO 12100:2010,IDT)
MS ISO 12103-1:2005 ROAD VEHICLES - TEST DUST FOR FILTER EVALUATION - PART 1: ARIZONA TEST
4378 18 RM 30.00
(CONFIRMED:2011) DUST (ISO 12103-1:1997, IDT)
MS ISO 12103-2:2005 Road vehicles - Test dust for filter evaluation - Part 2: Aluminium oxide test dust
4379 21 RM 30.00
(CONFIRMED:2016) (ISO 12103-2:1997, IDT)
CLOTHING FOR PROTECTION AGAINST HEAT AND FLAME - DETERMINATION OF
4380 MS ISO 12127:2005 CONTACT HEAT TRANSMISSION THROUGH PROTECTIVE CLOTHING OR 15 RM 15.00
CONSTITUENT MATERIALS (ISO 12127:1996, IDT)
STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS
4381 MS ISO 12141:2011 CONCENTRATION OF PARTICULATE MATTER (DUST) AT LOW CONCENTRATIONS 51 RM 75.00
- MANUAL GRAVIMETRIC METHOD (ISO 12141:2002, IDT)
ROAD VEHICLES - ENDURANCE BRAKING SYSTEMS OF MOTOR VEHICLES AND
4382 MS ISO 12161:2009 37 RM 60.00
TOWED VEHICLES - TEST PROCEDURES (ISO 12161:2006, IDT)
THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE
4383 MS ISO 12162:2003 APPLICATIONS – CLASSIFICATION AND DESIGNATION – OVERALL SERVICE 13 RM 15.00
(DESIGN) COEFFICIENT (ISO 12162:1995, IDT)
Paper and board - Determination of compressive strength - Ring crush method
4384 MS ISO 12192:2012 19 RM 30.00
(First revision) (ISO 12192:2011, IDT)
INFORMATION TECHNOLOGY - SOFTWARE LIFE CYCLE PROCESSES (FIRST
4385 MS ISO/IEC 12207:2007 133 RM 195.00
REVISION) (ISO/IEC 12207:1995, AMD. 1:2002, AMD. 2:2004, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4403 MS EN 12620:2010, AMD. 1:2012 AGGREGATES FOR CONCRETE (SECOND REVISION) FREE 4 RM -
OPHTHALMIC OPTICS - CONTACT LENSES - DETERMINATION OF SCATTERED
4404 MS ISO 12864:2009 14 RM 15.00
LIGHT (ISO 12864:1997, IDT)
MS ISO 12865:2010
4405 Ophthalmic instruments - Retinoscopes (ISO 12865:2006, IDT) 11 RM 15.00
(CONFIRMED:2015)
OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST
4406 MS ISO 12870:2010 34 RM 45.00
METHODS (ISO 12870:2004, IDT)
PETROLEUM PRODUCTS - DETERMINATION OF WATER - COULOMETRIC KARL
4407 MS ISO 12937:2009 21 RM 30.00
FISCHER TITRATION METHOD (ISO 12937:2000, IDT)
GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE
4408 MS ISO 12956:2009 24 RM 30.00
CHARACTERISTIC OPENING SIZE (ISO 12956: 1999, IDT)
GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF
4409 MS ISO 12958:2009 24 RM 30.00
WATER FLOW CAPACITY IN THEIR PLANE (ISO 12958: 1999, IDT)
Ceramic tiles - Definitions, classification, characteristics and marking (First
4410 MS ISO 13006:2014 62 RM 90.00
revision) (ISO 13006:2012, IDT)
CERAMIC TILES - GROUTS AND ADHESIVES - PART 1: TERMS, DEFINITIONS AND
4411 MS ISO 13007-1:2005 17 RM 30.00
SPECIFICATIONS FOR ADHESIVES (ISO 13007-1:2004, IDT)
CERAMIC TILES - GROUTS AND ADHESIVES - PART 2: TEST METHODS FOR
4412 MS ISO 13007-2:2005 47 RM 75.00
ADHESIVES (ISO 13007-2:2005, IDT)
CERAMIC TILES - GROUTS AND ADHESIVES - PART 3: DEFINITIONS AND
4413 MS ISO 13007-3:2005 15 RM 15.00
SPECIFICATIONS FOR GROUTS (ISO 13007-3:2004, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4421 MS EN 13263-2:2017 Silica fume for concrete - Part 2: Conformity evaluation 26 RM 45.00
Silica fume for concrete - Part 1: Definitions, requirements and conformity
4422 MS EN 13263-1:2017 31 RM 45.00
criteria
MS ISO 13310:2004 Iron ores - Determination of zinc content - Flame atomic absorption
4423 22 RM 30.00
(CONFIRMED:2013) spectrometric method (ISO 13310:1997, IDT)
TRANSPORTABLE GAS CYLINDERS - FITTING OF VALVES TO GAS CYLINDERS (ISO
4424 MS ISO 13341:2008 17 RM 30.00
13341:1997, IDT)
PACKAGING – COMPLETE, FILLED TRANSPORT PACKAGES AND UNIT LOADS –
4425 MS ISO 13355:2004 15 RM 15.00
VERTICAL RANDOM VIBRATION TEST
Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal
4426 MS ISO 13356:2011 22 RM 30.00
zirconia (Y-TZP) (ISO 13356:2008, IDT)
ERGONOMIC REQUIREMENTS FOR WORK WITH VISUAL DISPLAY BASED ON
4427 MS ISO 13406-1:2007 13 RM 15.00
FLAT PANELS - PART 1: INTRODUCTION (ISO 13406-1:1999, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4435 MS EN 13414-1:2012 Steel wire rope slings - Safety - Part 1: Slings for general lifting service 26 RM 45.00
4436 MS EN 13414-3:2012 Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings 31 RM 45.00
Steel wire rope slings - Safety - Part 2: Specification for information for use and
4437 MS EN 13414-2:2012 27 RM 45.00
maintenance to be provided by the manufacturer
GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF
4438 MS ISO 13431:2009 27 RM 45.00
TENSILE CREEP AND CREEP RUPTURE BEHAVIOUR (ISO 13431: 1999, IDT)
GEOSYNTHETICS – DYNAMIC PERFORATION TEST (CONE DROP TEST) (ISO
4439 MS ISO 13433:2006 16 RM 30.00
13433:2006, IDT)
PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF
MS ISO 13468-2:2004
4440 TRANSPARENT MATERIALS - PART 2: DOUBLE-BEAM INSTRUMENT (ISO 13468- 14 RM 15.00
(CONFIRMED:2011)
2:1999, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4451 MS ISO 13688 : 2004 PROTECTIVE CLOTHING – GENERAL REQUIREMENTS (ISO 13688:1998, IDT) 21 RM 30.00
Meat and meat products - Determination of total phosphorus content -
4452 MS ISO 13730:2012 14 RM 15.00
Spectrometric method (ISO 13730:1996, IDT)
ERGONOMICS OF THE THERMAL ENVIRONMENT - VOCABULARY AND SYMBOLS
4453 MS ISO 13731:2010 43 RM 60.00
(ISO 13731:2001, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4459 MS ISO 13769:2008 GAS CYLINDERS - STAMP MARKING (ISO 13769:2002, AMENDMENT 1:2003, IDT) 22 RM 30.00
IMPLANTS FOR SURGERY - HYDROXYAPATITE - PART 2: COATINGS OF
4460 MS ISO 13779-2:2010 16 RM 30.00
HYDROXYAPATITE (ISO 13779-2:2008, IDT)
IMPLANTS FOR SURGERY - HYDROXYAPATITE - PART 3: CHEMICAL ANALYSIS
4461 MS ISO 13779-3:2010 AND CHARACTERIZATION OF CRYSTALLINITY AND PHASE PURITY (ISO 13779- 31 RM 45.00
3:2008, IDT)
IMPLANTS FOR SURGERY - HYDROXYAPATITE - PART 4: DETERMINATION OF
4462 MS ISO 13779-4:2010 18 RM 30.00
COATING ADHESION STRENGTH (ISO 13779-4:2002, IDT)
IMPLANTS FOR SURGERY - HYDROXYAPATITE - PART 1: CERAMIC
4463 MS ISO 13779-1:2010 14 RM 15.00
HYDROXYAPATITE (ISO 13779-1:2008, IDT)
Assessment of in-situ compressive strength in structures and precast concrete
4464 MS EN 13791:2014 36 RM 60.00
components
PLASTICS – VERIFICATION OF PENDULUM IMPACT-TESTING MACHINES –
4465 MS ISO 13802:2004 CHARPY, IZOD AND TENSILE IMPACT-TESTING (ISO 13802:1999 AND TECHNICAL 49 RM 75.00
CORRIGENDUM 1:2000, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4501 MS ISO 14010 : 1997 GUIDELINES FOR ENVIRONMENTAL AUDITING – GENERAL PRINCIPLES 16 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4517 MS ISO 14050 : 2001 ENVIRONMENTAL MANAGEMENT – VOCABULARY (ISO 14050 : 1998, IDT) 20 RM 30.00
ENVIRONMENTAL MANAGEMENT – ENVIRONMENTAL COMMUNICATION –
4518 MS ISO 14063:2007 37 RM 60.00
GUIDELINES AND EXAMPLES (ISO 14063:2006, IDT)
Greenhouse gases - Part 2: Specification with guidance at the project level for
MS ISO 14064-2:2007
4519 quantification, monitoring and reporting of greenhouse gas emission reductions 43 RM 60.00
(CONFIRMED:2013)
or removal enhancements (ISO 14064-2:2006, IDT)
MS ISO 14064-3:2007 Greenhouse gases - Part 3: Specification with guidance for the validation and
4520 48 RM 75.00
(CONFIRMED:2013) verification of greenhouse gas assertions (ISO 14064-3:2006, IDT)
Greenhouse gases - Part 1: Specification with guidance at the organization level
MS ISO 14064-1:2007
4521 for quantification and reporting of greenhouse gas emissions and removals (ISO 31 RM 45.00
(CONFIRMED:2013)
14064-1:2006, IDT)
GREENHOUSE GASES - REQUIREMENTS FOR GREENHOUSE GAS VALIDATION
4522 MS ISO 14065:2009 AND VERIFICATION BODIES FOR USE IN ACCREDITATION OR OTHER FORMS OF 33 RM 45.00
RECOGNITION (ISO 14065:2007, IDT)
MS ISO 14111:2002 NATURAL GAS - GUIDELINES TO TRACEABILITY IN ANALYSIS (ISO 14111:1997,
4523 41 RM 60.00
(CONFIRMED:2007) IDT)
MS ISO 14118:2005
4524 Safety of machinery – prevention of unexpected start up (ISO 14118:2000, IDT) 25 RM 30.00
(CONFIRMED:2011)
SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS -
4525 MS ISO 14119:2005 52 RM 75.00
PRINCIPLES FOR DESIGN AND SELECTION (ISO 14119:1998, IDT)
SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN
4526 MS ISO 14120:2005 38 RM 60.00
AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS (ISO 14120:2002, IDT)
MS ISO 14122-4:2005 SAFETY OF MACHINERY – PERMANENT MEANS OF ACCESS TO MACHINERY –
4527 41 RM 60.00
(CONFIRMED:2011) PART 4: FIXED LADDERS (ISO 14122-4:2004, IDT)
SAFETY OF MACHINERY – PERMANENT MEANS OF ACCESS TO MACHINERY –
4528 MS ISO 14122-2 : 2003 21 RM 30.00
PART 2: WORKING PLATFORMS AND WALKWAYS (ISO 14122-2:2001, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4551 MS ISO 14487:2010 PULPS - STANDARD WATER FOR PHYSICAL TESTING (ISO 14487:1997, IDT) 12 RM 15.00
MS ISO/IEC 14492:2003 Information technology - Lossy/lossless coding of bi-level images (ISO/IEC
4552 170 RM 240.00
(CONFIRMED:2015) 14492:2001, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4560 MS ISO 14585:2012 Hexalobular socket pan head tapping screws (ISO 14585:2011, IDT) 12 RM 15.00
4561 MS ISO 14586:2012 Hexalobular socket countersunk head tapping screws (ISO 14586:2011, IDT) 12 RM 15.00
Hexalobular socket raised countersunk (oval) head tapping screws (ISO
4562 MS ISO 14587:2012 12 RM 15.00
14587:2011, IDT)
Cold-reduced steel sheet of high tensile strength and low yield point with
4563 MS ISO 14590:2014 21 RM 30.00
improved formability (ISO 14590:2005, IDT)
NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 14630:2008,
4564 MS ISO 14630:2010 25 RM 30.00
IDT)
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) -
4565 MS ISO 14703:2009 SAMPLE PREPARATION FOR THE DETERMINATION OF PARTICLE SIZE 12 RM 15.00
DISTRIBUTION OF CERAMIC POWDERS (FIRST REVISION) (ISO 14703:2008, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 15190:2008
4618 Medical laboratories - Requirements for safety (ISO 15190:2003, IDT) 51 RM 75.00
(CONFIRMED:2015)
In vitro diagnostic medical devices - Measurement of quantities in samples of
MS ISO 15193:2010
4619 biological origin - Requirements for content and presentation of reference 28 RM 45.00
(CONFIRMED:2015)
measurement procedures (First revision) (ISO 15193:2009, IDT)
In vitro diagnostic medical devices - Measurement of quantities in samples of
MS ISO 15194:2010
4620 biological origin - Requirements for certified reference materials and the 26 RM 45.00
(CONFIRMED:2015)
content of supporting documentation (First revision) (ISO 15194:2009, IDT)
MS ISO 15195:2008 Laboratory medicine - Requirements for reference measurement laboratories
4621 25 RM 30.00
(CONFIRMED:2015) (ISO 15195:2003, IDT)
IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE
4622 MS ISO 15197:2008 MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS 45 RM 60.00
(ISO 15197:2003, IDT)
MS ISO 15198:2008 Clinical laboratory medicine - In vitro diagnostic medical devices - Validation of
4623 22 RM 30.00
(CONFIRMED:2015) user quality control procedures by the manufacturer (ISO 15198:2004, IDT)
Medical devices - Quality management - Medical device nomenclature data
4624 MS ISO 15225:2011 29 RM 45.00
structure (First Revision) (ISO 15225:2010, IDT)
Ergonomics of the thermal environment - Risk assessment strategy for the
MS ISO 15265:2008
4625 prevention of stress or discomfort in thermal working conditions (ISO 23 RM 30.00
(CONFIRMED:2013)
15265:2004, IDT)
PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS
4626 MS ISO 15270:2008 23 RM 30.00
WASTE (ISO 15270:2008, IDT)
ANIMAL AND VEGETABLE FATS AND OILS – DETECTION AND IDENTIFICATION OF
4627 MS ISO 15303:2007 20 RM 30.00
A VOLATILE ONRGANIC CONTAMINANT BY GC/MS (ISO 15303:2001, IDT)
Pulp, paper and board - Determination of pentachlorophenol in an aqueous
4628 MS ISO 15320:2012 18 RM 30.00
extract (ISO 15320:2011, IDT)
Medical infusion bottles - Suspension devices for multiple use - Requirements
4629 MS ISO 15375:2011 12 RM 15.00
and test methods (ISO 15375:2010, IDT)
MS ISO 15383:2005 Protective gloves for firefighters - laboratory test methods and performance
4630 35 RM 45.00
(CONFIRMED:2012) requirements (ISO 15383:2001, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4655 MS ISO 15512:2012 Plastics - Determination of water content (First revision) (ISO 15512:2008, IDT) 25 RM 30.00
Ergonomic design for the safety of machinery - Part 1: Principles for
MS ISO 15534-1:2003
4656 determining the dimensions required for openings for whole-body access into 26 RM 45.00
(CONFIRMED:2013)
machinery (ISO 15534-1:2000, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4663 MS ISO 15605 : 2003 ADHESIVES - SAMPLING (ISO 15605:2000 IDT) 21 RM 30.00
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC
4664 MS ISO 15607:2010 MATERIALS - GENERAL RULES (FIRST REVISION) (ISO 15607:2003, COR. 1:2005, 27 RM 45.00
IDT)
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC
4665 MS ISO 15609-1:2010 MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING 19 RM 30.00
(FIRST REVISION) (ISO 15609-1:2004, COR. 1:2005, IDT)
Specification and qualification of welding procedures for metallic materials -
4666 MS ISO 15611:2011 Qualification based on previous welding experience (First revision) (ISO 14 RM 15.00
15611:2003, IDT)
Specification and qualification of welding procedures for metallic materials -
4667 MS ISO 15613:2011 Qualification based on pre-production welding test (First revision) (ISO 15 RM 15.00
15613:2004, IDT)
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST
4668 MS ISO 15630-3:2009 33 RM 45.00
METHODS - PART 3: PRESTRESSING STEEL (ISO 15630-3:2002, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Steel for the reinforcement and prestressing of concrete - Test methods - Part
4669 MS ISO 15630-1:2012 30 RM 45.00
1: Reinforcing bars, wire rod and wire (ISO 15630-1:2010, IDT)
Steel for the reinforcement and prestressing of concrete - Test methods - Part
4670 MS ISO 15630-2:2012 25 RM 30.00
2: Welded fabric (ISO 15630-2:2010, IDT)
Cardiovascular implants and artificial organs - Hard-shell cardiotomy/venous
4671 MS ISO 15674:2011 reservoir systems (with/without filter) and soft venous reservoir bags (ISO 18 RM 30.00
15674:2009, IDT)
Cardiovascular implants and artificial organs - Cardiopulmonary bypass systems
4672 MS ISO 15675:2011 18 RM 30.00
- Arterial blood line filters (ISO 15675:2009, IDT)
Cardiovascular implants and artificial organs - Requirements for single-use
4673 MS ISO 15676:2011 tubing packs for cardiopulmonary bypass and extracorporeal membrane 18 RM 30.00
oxygenation (ECMO) (ISO 15676:2005, IDT)
STATIONARY SOURCE EMISSIONS - SAMPLING AND DETERMINATION OF
4674 MS ISO 15713:2009 23 RM 30.00
GASEOUS FLUORIDE CONTENT (ISO 15713:2006, IDT)
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) -
TEST METHOD FOR FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS AT
4675 MS ISO 15732:2011 29 RM 45.00
ROOM TEMPERATURE BY SINGLE EDGE PRECRACKED BEAM (SEPB) METHOD
(ISO 15732:2003, IDT)
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) -
TEST METHOD FOR TENSILE STRESS-STRAIN BEHAVIOUR OF CONTINUOUS,
4676 MS ISO 15733:2005 37 RM 60.00
FIBRE-REINFORCED COMPOSITES AT ROOM TEMPERATURE (ISO 15733:2001,
IDT)
ERGONOMICS OF THE THERMAL ENVIRONMENT - COLD WORKPLACES - RISK
4677 MS ISO 15743:2010 40 RM 60.00
ASSESSMENT AND MANAGEMENT (ISO 15743:2008, IDT)
4678 MS ISO 15747:2011 Plastic containers for intravenous injections (ISO 15747:2010, IDT) 23 RM 30.00
PACKAGING – STEEL DRUMS – PART 2: NON-REMOVABLE HEAD (TIGHT HEAD)
4679 MS ISO 15750-2:2007 DRUMS WITH A MINIMUM TOTAL CAPACITY OF 212 L, 216,5 L AND 230 L (ISO 20 RM 30.00
15750-2:2002, IDT)
PACKAGING – STEEL DRUMS – PART 3: INSERTED FLANGE-TYPE CLOSURE
4680 MS ISO 15750-3:2007 53 RM 75.00
SYSTEMS (ISO 15750-3:2002, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4698 MS ISO 16000-1:2008, AMD. 1:2014 Indoor air - Part 1: General aspects of sampling strategy (ISO 16000-1:2004, IDT) FREE 2 RM -
Indoor air - Part 3: Determination of formaldehyde and other carbonyl
4699 MS ISO 16000-3:2015 compounds in indoor air and test chamber air - Active sampling method (First 39 RM 60.00
revision) (ISO 16000-3:2011, IDT)
INDOOR AIR - PART 16: DETECTION AND ENUMERATION OF MOULDS -
4700 MS ISO 16000-16:2011 33 RM 45.00
SAMPLING BY FILTRATION (ISO 16000-16:2008, IDT)
INDOOR AIR - PART 17: DETECTION AND ENUMERATION OF MOULDS -
4701 MS ISO 16000-17:2011 34 RM 45.00
CULTURE-BASED METHOD (ISO 16000-17:2008, IDT)
INDOOR AIR - PART 4: DETERMINATION OF FORMALDEHYDE - DIFFUSIVE
4702 MS ISO 16000-4:2008 21 RM 30.00
SAMPLING METHOD (ISO 16000-4:2004, IDT)
INDOOR AIR - PART 3: DETERMINATION OF FORMALDEHYDE AND OTHER
4703 MS ISO 16000-3:2008 38 RM 60.00
CARBONYL COMPOUNDS - ACTIVE SAMPLING METHOD (ISO 16000-3:2001, IDT)
INDOOR AIR - PART 1: GENERAL ASPECTS OF SAMPLING STRATEGY (ISO 16000-
4704 MS ISO 16000-1:2008 33 RM 45.00
1:2004, IDT)
INDOOR AIR - PART 6: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS
IN INDOOR AND TEST CHAMBER AIR BY ACTIVE SAMPLING ON TENAX TA®
4705 MS ISO 16000-6:2008 37 RM 60.00
SORBENT, THERMAL DESORPTION AND GAS CHROMATOGRAPHY USING MS/FID
(ISO 16000-6:2004, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 16000-2:2008
4716 Indoor air - Part 2: Sampling strategy for formaldehyde (ISO 16000-2:2004, IDT) 27 RM 45.00
(CONFIRMED:2013)
PLASTICS – DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS (ISO
4717 MS ISO 16012:2007 18 RM 30.00
16012:2004 AND TECHNICAL CORRIGENDUM 1:2004, IDT)
PLASTICS – DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR
4718 MS ISO 16014-1:2004 MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION 26 RM 45.00
CHROMATOGRAPHY - PART 1: GENERAL PRINCIPLES (ISO 16014-1:2003, IDT)
PLASTICS – DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR
MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION
4719 MS ISO 16014-2:2004 22 RM 30.00
CHROMATOGRAPHY -PART 2: UNIVERSAL CALIBRATION METHOD (ISO 16014-
2:2003, IDT)
PLASTICS – DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR
MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION
4720 MS ISO 16014-3:2004 21 RM 30.00
CHROMATOGRAPHY -PART 3: LOW-TEMPERATURE METHOD (ISO 16014-
3:2003, IDT)
PLASTICS – DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR
MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION
4721 MS ISO 16014-4:2004 22 RM 30.00
CHROMATOGRAPHY -PART 4: HIGH-TEMPERATURE METHOD (ISO 16014-
4:2003, IDT)
Indoor, ambient and workplace air - Sampling and analysis of volatile organic
MS ISO 16017-1:2008
4722 compounds by sorbent tube/thermal desorption/capillary gas chromatography 41 RM 60.00
(CONFIRMED:2013)
- Part1:Pumped sampling (ISO 16017-1:2000, IDT)
Indoor, ambient and workplace air - Sampling and analysis of volatile organic
MS ISO 16017-2:2008
4723 compounds by sorbent tube/thermal desorption/capillary gas chromatography 49 RM 75.00
(CONFIRMED:2013)
- Part 2: Diffusive sampling
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE -
4724 MS ISO 16020:2007 21 RM 30.00
VOCABULARY (ISO 16020:2005, IDT)
RUBBER CONDOMS FOR CLINICAL TRIALS - MEASUREMENT OF PHYSICAL
4725 MS ISO 16037:2010 17 RM 30.00
PROPERTIES (ISO 16037:2002, IDT)
ERGONOMICS OF HUMAN-SYSTEM INTERACTION - GUIDANCE ON
4726 MS ISO/TS 16071:2007 43 RM 60.00
ACCESSIBILITY FOR HUMAN-COMPUTER INTERFACES (ISO/TS 16071:2003, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4736 MS EN 16232:2015 Child use and care articles - Infant swings 41 RM 60.00
STATISTICAL INTERPRETATION OF DATA - PART 6: DETERMINATION OF
4737 MS ISO 16269-6:2005 STATISTICAL TOLERANCE INTERVALS (FIRST REVISION)(ISO 16269-6:2005, 43 RM 60.00
IDT)(PUBLISHED BY STANDARDS MALAYSIA IN 2010)
Statistical interpretation of data - Part 4: Detection and treatment of outliers
4738 MS ISO 16269-4:2010 64 RM 90.00
(ISO 16269-4:2010, IDT) (Published by STANDARDS MALAYSIA in 2012)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 16269-7:2004 Statistical interpretation of data - Part 7: median - Estimation and confidence
4739 22 RM 30.00
(CONFIRMED:2015) intervals (ISO 16269-7:2001, IDT)
HEAVY COMMERCIAL VEHICLES AND BUSES - STEADY-STATE ROLLOVER
4740 MS ISO 16333:2008 28 RM 45.00
THRESHOLD - TILT-TABLE TEST METHOD (ISO 16333:2004, IDT)
AMBIENT AIR - DETERMINATION OF PARTICLE-PHASE POLYCYCLIC AROMATIC
4741 MS ISO 16362:2007 HYDROCARBONS BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY (ISO 38 RM 60.00
16362:2005, IDT)
Implants for surgery - Measurements of open-circuit potential to assess
MS ISO 16429:2011
4742 corrosion behaviour of metallic implantable materials and medical devices over 19 RM 30.00
(CONFIRMED:2015)
extended time periods (ISO 16429:2004, IDT)
ANIMAL FEEDING STUFFS - DETERMINATIONOF AMYLASE-TREATED NEUTRAL
4743 MS ISO 16472:2007 26 RM 45.00
DETERGENT FIBRE CONTENT (aNDF) (ISO 16472:2006, IDT)
Clothing for protection against contact with blood and body fluids -
MS ISO 16603:2011 Determination of the resistance of protective clothing materials to penetration
4744 20 RM 30.00
(CONFIRMED:2015) by blood and body fluids - Test method using synthetic blood (ISO 16603:2004,
IDT)
Clothing for protection against contact with blood and body fluids -
MS ISO 16604:2011 Determination of resistance of protective clothing materials to penetration by
4745 26 RM 45.00
(CONFIRMED:2015) blood-borne pathogens - Test method using Phi-X174 bacteriophage (ISO
16604:2004, IDT)
METEOROLOGY – SONIC ANEMOMETERS/ THERMOMETERS – ACCEPTANCE
4746 MS ISO 16622:2007 32 RM 45.00
TEST METHODS FOR MEAN WIND MEASUREMENTS (ISO 16622:2002, IDT)
MS ISO 16628:2010
4747 Tracheobronchial tubes - Sizing and marking (ISO 16628:2008, IDT) 19 RM 30.00
(CONFIRMED:2015)
GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES -
4748 MS ISO 16664:2010 27 RM 45.00
GUIDELINES (ISO 16664:2004, IDT)
OPHTHALMIC IMPLANTS - IRRIGATING SOLUTIONS FOR OPHTHALMIC SURGERY
4749 MS ISO 16671:2010 29 RM 45.00
(ISO 16671:2003, IDT)
4750 MS ISO 16672:2010 OPHTHALMIC IMPLANTS - OCULAR ENDOTAMPONADES (ISO 16672:2003, IDT) 21 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Plastics - Film and sheeting - Cast polypropylene (PP) films (ISO 17557:2003,
4786 MS ISO 17557:2013 16 RM 30.00
IDT)
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) -
4787 MS ISO 17561:2008 TEST METHOD FOR ELASTIC MODULI OF MONOLITHIC CERAMICS AT ROOM 21 RM 30.00
TEMPERATURE BY SONIC RESONANCE (ISO 17561:2002/COR. 1:2007, IDT)
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) -
4788 MS ISO 17562:2005 TEST METHOD FOR LINEAR THERMAL EXPANSION OF MONOLITHIC CERAMICS 20 RM 30.00
BY PUSH-ROD TECHNIQUE (ISO 17562:2001, IDT)
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) -
4789 MS ISO 17565:2008 TEST METHOD FOR FLEXURAL STRENGTH OF MONOLITHIC CERAMICS AT 37 RM 60.00
ELEVATED TEMPERATURE (ISO 17565:2003, IDT)
Clinical laboratory testing and in vitro medical devices - Requirements for in
MS ISO 17593:2010
4790 vitro monitoring systems for self-testing of oral anticoagulant therapy (ISO 65 RM 90.00
(CONFIRMED:2015)
17593:2007, IDT)
Meat and meat products - Carcass sampling for microbiological analysis (ISO
4791 MS ISO 17604:2012 28 RM 45.00
17604:2003, AMD. 1:2009, IDT)
Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-
4792 MS ISO 17636-1:2017 39 RM 60.00
ray techniques with film (Third revision) (ISO 17636-1:2013, IDT)
STERILIZATION OF MEDICAL DEVICES - INFORMATION TO BE PROVIDED BY THE
4793 MS ISO 17664:2010 MANUFACTURER FOR THE PROCESSING OF RESTERILIZABLE MEDICAL DEVICES 27 RM 45.00
(ISO 17664:2004, IDT)
Sterilization of health care products - Moist heat - Part 1: Requirements for the
MS ISO 17665-1:2010
4794 development, validation and routine control of a sterilization process for 50 RM 75.00
(CONFIRMED:2015)
medical devices (ISO 17665-1:2006, IDT)
METEOROLOGY - WIND MEASUREMENTS - PART 1: WIND TUNNEL TEST
4795 MS ISO 17713-1:2009 METHODS FOR ROTATING ANEMOMETER PERFORMANCE (ISO 17713-1:2007, 26 RM 45.00
IDT)
METEOROLOGY - AIR TEMPERATURE MEASUREMENTS - TEST METHODS FOR
4796 MS ISO 17714:2009 COMPARING THE PERFORMANCE OF THERMOMETER SHIELDS/SCREENS AND 28 RM 45.00
DEFINING IMPORTANT CHARACTERISTICS (ISO 17714:2007, IDT)
ANIMAL FEEDING STUFFS – DETERMINATION OF THE CONTENT OF FATTY ACIDS
4797 MS ISO/TS 17764-1:2007 16 RM 30.00
- PART 1: PREPARATION OF METHYL ESTERS (ISO/TS 17764-1:2002, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4835 MS ISO 19113:2003 GEOGRAPHIC INFORMATION – QUALITY PRINCIPLES (ISO 19113:2002, IDT) 40 RM 60.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 19114:2006
4836 Geographic information - Quality evaluation procedures (ISO 19114:2003, IDT) 76 RM 120.00
(CONFIRMED:2015)
Geographic information - Metadata - Part 2: Extensions for imagery and gridded
4837 MS ISO 19115-2:2011 52 RM 75.00
data (ISO 19115-2:2009, IDT)
MS ISO 19116:2006
4838 Geographic information - Positioning services (ISO 19116:2004, IDT) 65 RM 90.00
(CONFIRMED:2015)
4839 MS ISO 19117:2006 GEOGRAPHIC INFORMATION – PORTRAYAL (ISO 19117:2005, IDT) 50 RM 75.00
MS ISO 19119:2006
4840 Geographic information - Services (ISO 19119:2005, IDT) 79 RM 120.00
(CONFIRMED:2015)
MS ISO 19123:2007 Geographic information - Schema for coverage geometry and functions (ISO
4841 77 RM 120.00
(CONFIRMED:2015) 19123:2005, IDT)
MS ISO 19125-2:2006 Geographic information - Simple feature access - Part 2: SQL Option (ISO 19125-
4842 73 RM 105.00
(CONFIRMED:2015) 2:2004, IDT)
MS ISO 19125-1:2006 Geographic information - Simple feature access - Part 1: Common architecture
4843 54 RM 75.00
(CONFIRMED:2015) (ISO 19125-1:2004, IDT)
MS ISO/TS 19127:2006 Geographic information - Geodetic Codes and parameters (ISO/TS 19127:2005,
4844 32 RM 45.00
(CONFIRMED:2015) IDT)
MS ISO 19128:2007
4845 Geographic information - Web map server interface (ISO 19128:2005, IDT) 88 RM 135.00
(CONFIRMED:2015)
GEOGRAPHIC INFORMATION - DATA PRODUCT SPECIFICATIONS (ISO
4846 MS ISO 19131:2009 52 RM 75.00
19131:2007, IDT)
MS ISO 19133:2007 Geographic information - Location-based services - Tracking and navigation (ISO
4847 156 RM 225.00
(CONFIRMED:2015) 19133:2005, IDT)
GEOGRAPHIC INFORMATION - PROCEDURES FOR ITEM REGISTRATION (ISO
4848 MS ISO 19135:2007 68 RM 105.00
19135:2005, IDT)
MS ISO 19136:2008 Geographic information - Geography markup language (GML) (ISO 19136:2007,
4849 410 RM 585.00
(CONFIRMED:2015) IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS ISO 19141:2009
4850 Geographic information - Schema for moving features (ISO 19141:2008, IDT) 62 RM 90.00
(CONFIRMED:2015)
4851 MS ISO 19142:2012 Geographic information - Web feature service (ISO 19142:2010, IDT) 254 RM 360.00
MS ISO 19144-1:2011 Geographic information - Classification systems - Part 1: Classification system
4852 41 RM 60.00
(CONFIRMED:2015) structure (ISO 19144-1:2009, IDT)
4853 MS ISO 19146:2012 Geographic information - Cross-domain vocabularies (ISO 19146:2010, IDT) 40 RM 60.00
ADHESIVES - DETERMINATION OF TEMPERATURE DEPENDENCE OF SHEAR
4854 MS ISO 19212:2008 17 RM 30.00
STRENGTH (ISO 19212:2006, IDT)
4855 MS ISO 19252:2010 PLASTICS - DETERMINATION OF SCRATCH PROPERTIES (ISO 19252:2008, IDT) 26 RM 45.00
MS ISO 19353:2006 SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION (ISO 19353:2005,
4856 32 RM 45.00
(CONFIRMED:2011) IDT)
Diesel fuel and petrol filters for internal combustion engines - Filteration
MS ISO 19438:2005
4857 efficiency using particle counting and contaminant retention capacity (ISO 50 RM 75.00
(CONFIRMED:2016)
19438:2003, IDT)
Information technology - Method for the determination of toner cartridge yield
4858 MS ISO/IEC 19752:2012 for monochromatic electrophotographic printers and multi-function devices 28 RM 45.00
that contain printer components (ISO/IEC 19752:2004, IDT)
INFORMATION TECHNOLOGY - BIOMETRIC DATA INTERCHANGE FORMATS -
4859 MS ISO/IEC 19794-4:2007 33 RM 45.00
PART 4: FINGER IMAGE DATA (ISO/IEC 19794-4:2005, IDT)
Method for the determination of toner cartridge yield for colour printers and
4860 MS ISO/IEC 19798:2012 multi-function devices that contain printer components (ISO/IEC 19798:2007, 24 RM 30.00
IDT)
Petroleum and natural gas industries - General requirements for offshore
4861 MS ISO 19900:2012 39 RM 60.00
structures (ISO 19900:2002, IDT)
Petroleum and natural gas industries - Fixed steel offshore structures (ISO
4862 MS 19902:2014 683 RM 975.00
19902:2007, AMD. 1:2013, MOD)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4881 MS ISO 20753:2010 PLASTICS - TEST SPECIMENS (ISO 20753:2008, IDT) 24 RM 30.00
Cinical laboratory testing and in vitro diagnostic test systems - Susceptibility
testing of infectious agents and evaluation of performance of antimicrobial
MS ISO 20776-1:2010
4882 susceptibility test devices - Part 1: Reference method for testing the in vitro 28 RM 45.00
(CONFIRMED:2015)
activity of antimicrobial agents against rapidly growing aerobic bacteria
involved in infectious diseases (ISO 20776-1:2006, IDT)
Clinical laboratory testing and in vitro diagnostic test systems - Susceptibility
MS ISO 20776-2:2010 testing of infectious agents and evaluation of performance of antimicrobial
4883 17 RM 30.00
(CONFIRMED:2015) susceptibility test devices - Part 2: Evaluation of performance of antimicrobial
susceptibility test devices (ISO 20776-2:2007, IDT)
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) -
4884 MS ISO 20808:2006 DETERMINATION OF FRICTION AND WEAR CHARACTERISTICS OF MONOLITHIC 19 RM 30.00
CERAMICS BY BALL-ON-DISC METHOD (ISO 20808:2004, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4902 MS ISO 21988:2007 ABRASION-RESISTANT CAST IRONS - CLASSIFICATION (ISO 21988:2006, IDT) 24 RM 30.00
Food safety management systems - Requirements for any organization in the
4903 MS ISO 22000:2012 41 RM 60.00
food chain (ISO 22000:2005, IDT)
PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS
4904 MS ISO 22088-2:2007 CRACKING (ESC) - PART 2: CONSTANT TENSILE LOAD METHOD (ISO 22088- 20 RM 30.00
2:2006, IDT)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method
4905 MS ISO 22197-2:2012 for air-purification performance of semiconducting photocatalytic materials - 22 RM 30.00
Part 2: Removal of acetaldehyde (ISO 22197-2:2011, IDT)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method
4906 MS ISO 22197-3:2012 for air-purification performance of semiconducting photocatalytic materials - 19 RM 30.00
Part 3: Removal of toluene (ISO 22197-3:2011, IDT)
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) -
TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING
4907 MS ISO 22197-1:2008 22 RM 30.00
PHOTOCATALYTIC MATERIALS - PART 1: REMOVAL OF NITRIC OXIDE (ISO 22197-
1:2007, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4946 MS ISO 24214:2011 Skin barrier for ostomy aids - Vocabulary (ISO 24214:2006, IDT) 11 RM 15.00
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) -
4947 MS ISO 24235:2008 DETERMINATION OF PARTICLE SIZE DISTRIBUTION OF CERAMIC POWDERS BY 16 RM 30.00
LASER DIFFRACTION METHOD (ISO 24235:2007, IDT)
FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY
4948 MS ISO 24276:2007 MODIFIED ORGANISMS AND DERIVED PRODUCTS - GENERAL REQUIREMENTS 27 RM 45.00
AND DEFINITIONS (ISO 24276:2006, IDT)
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) -
4949 MS ISO 24369:2006 DETERMINATION OF CONTENT OF COARSE PARTICLES IN CERAMIC POWDERS 15 RM 15.00
BY WET SIEVING METHOD (ISO 24369:2005, IDT)
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) -
TEST METHOD FOR FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS AT
4950 MS ISO 24370:2007 25 RM 30.00
ROOM TEMPERATURE BY CHEVRON-NOTCHED BEAM (CNB) METHOD (ISO
24370:2005, IDT)
Tips for assistive products for walking - Requirements and test methods - Part 1:
4951 MS ISO 24415-1:2011 17 RM 30.00
Friction of tips (ISO 24415-1:2009, IDT)
Ergonomics - Accessible design - Auditory signals for consumer products (ISO
4952 MS ISO 24500:2012 16 RM 30.00
24500:2010, IDT)
Ergonomics - Accessible design - Sound pressure levels of auditory signals for
4953 MS ISO 24501:2012 30 RM 45.00
consumer products (ISO 24501:2010, IDT)
Ergonomics - Accessible design - Specification of age-related luminance contrast
4954 MS ISO 24502:2012 19 RM 30.00
for coloured light (ISO 24502:2010, IDT)
Ergonomics - Accessible design - Tactile dots and bars on consumer products
4955 MS ISO 24503:2012 14 RM 15.00
(ISO 24503:2011, IDT)
Traffic and travel information (TTI) - TTI via transport protocol experts group
MS ISO/TS 24530-4:2007
4956 (TPEG) extensible markup language (XML) - Part 4: tpeg-ptiML (ISO/TS 24530- 42 RM 60.00
(CONFIRMED:2015)
4:2006, IDT)
Traffic and travel information (TTI) - TTI via transport protocol experts group
MS ISO/TS 24530-1:2007
4957 (TPEG) extensible markup language (XML) - Part 1: Introduction, common data 24 RM 30.00
(CONFIRMED:2015)
types and tpegML (ISO/TS 24530-1:2006, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Traffic and travel information (TTI) - TTI via transport protocol experts group
MS ISO/TS 24530-3:2007
4958 (TPEG) extensible markup language (XML) - Part 3: tpeg-rtmML (ISO/TS 24530- 64 RM 90.00
(CONFIRMED:2015)
3:2006, IDT)
Traffic and travel information (TTI) - TTI via transport protocol experts group
MS ISO/TS 24530-2:2007
4959 (TPEG) extensible markup language (XML) - Part 2: tpeg-locML (ISO/TS 24530- 52 RM 75.00
(CONFIRMED:2015)
2:2006, IDT)
Software engineering - NESMA functional size measurement method version
MS ISO/IEC 24570:2006
4960 2.1 - Definitions and counting guidelines for the application of function point 139 RM 195.00
(CONFIRMED:2015)
analysis (ISO/IEC 24570:2005, IDT)
MS ISO/IEC 24700:2010 Quality and performance of office equipment that contains reused components
4961 22 RM 30.00
(CONFIRMED:2015) (ISO/IEC 24700:2005, IDT)
Method for the determination of ink cartridge yield for colour inkjet printers
MS ISO/IEC 24711:2010
4962 and multi-function devices that contain printer components (ISO/IEC 39 RM 60.00
(CONFIRMED:2015)
24711:2007, IDT)
Recreational diving services - safety related minimum requirements for the
MS ISO 24801-1:2008
4963 training of recreational scuba divers - Part 1: Level 1 - Supervised diver (ISO 24 RM 30.00
(CONFIRMED:2013)
24801-1:2007, IDT)
Recreational diving services - safety related minimum requirements for the
MS ISO 24801-3:2008
4964 training of recreational scuba divers - Part 3: Level 3 - Dive leader (ISO 24801- 23 RM 30.00
(CONFIRMED:2013)
3:2007, IDT)
Recreational diving services - safety related minimum requirements for the
MS ISO 24801-2:2008
4965 training of recreational scuba divers - Part 2: Level 2 – Autonomous diver (ISO 26 RM 45.00
(CONFIRMED:2013)
24801-2:2007, IDT)
Recreational diving services - safety related minimum requirements for the
MS ISO 24802-1:2008
4966 training of recreational scuba instructors - Part 1: Level 1 (ISO 24802-1:2007, 21 RM 30.00
(CONFIRMED:2013)
IDT)
Recreational diving services - safety related minimum requirements for the
MS ISO 24802-2:2008
4967 training of recreational scuba instructors - Part 2: Level 2 (ISO 24802-2:2007, 23 RM 30.00
(CONFIRMED:2013)
IDT)
MS ISO 24803:2008 Recreational diving services - Requirements for recreational scuba diving
4968 20 RM 30.00
(CONFIRMED:2013) service providers (ISO 24803:2007, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4975 MS ISO 25841:2013 Female condoms - Requirements and test methods (ISO 25841:2011, IDT) 50 RM 75.00
Road vehicles - End-of-life activation of on-board pyrotechnic devices - Part 1:
4976 MS ISO 26021-1:2012 18 RM 30.00
General information and use case definitions (ISO 26021-1:2008, IDT)
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) -
4977 MS ISO 26423:2009 DETERMINATION OF COATING THICKNESS BY CRATER-GRINDING METHOD (ISO 25 RM 30.00
26423:2009, IDT)
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) -
4978 MS ISO 26424:2009 DETERMINATION OF THE ABRASION RESISTANCE OF COATINGS BY MICRO- 25 RM 30.00
SCALE ABRASION TEST (ISO 26424:2008, IDT)
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) -
4979 MS ISO 26443:2009 ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION OF CERAMIC 16 RM 30.00
COATINGS (ISO 26443:2008, IDT)
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) -
4980 MS ISO 26602:2009 SILICON NITRIDE MATERIALS FOR ROLLING BEARING BALLS (ISO 26602:2009, 17 RM 30.00
IDT)
WATER TREATMENT EQUIPMENT FOR HAEMODIALYSIS APPLICATIONS AND
4981 MS ISO 26722:2010 39 RM 60.00
RELATED THERAPIES (ISO 26722:2009, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
4983 MS ISO 26800:2013 Ergonomics - General approach, principles and concepts (ISO 26800:2011, IDT) 27 RM 45.00
Adhesives - Test methods for the evaluation and selection of adhesives for
4984 MS ISO 26842-2:2011 indoor wood products - Part 2: Resistance to delamination in severe 13 RM 15.00
environments (ISO 26842-2:2009, IDT)
Adhesives - Test methods for the evaluation and selection of adhesives for
4985 MS ISO 26842-1:2011 indoor wood products - Part 1: Resistance to delamination in non-severe 14 RM 15.00
environments (ISO 26842-1:2009, IDT)
Road vehicles - Brake lining friction materials - Standard wear test procedure
4986 MS ISO 26866:2012 21 RM 30.00
for commercial vehicles with air brakes (ISO 26866:2009, IDT)
Road vehicles - Brake lining friction materials - Friction behaviour assessment
4987 MS ISO 26867:2012 33 RM 45.00
for automotive brake systems (ISO 26867:2009, IDT)
Teknologi maklumat - Teknik keselamatan - Sistem pengurusan keselamatan
4988 MS ISO/IEC 27001:2013 (BM) maklumat - Keperluan (Semakan pertama) (ISO/IEC 27001:2013, IDT) 42 RM 60.00
(Diterbitkan oleh Jabatan Standard Malaysia pada tahun 2017)
Information technology - Security techniques - Information security
MS ISO/IEC 27001:2013, COR
4989 management systems - Requirements (First revision) (ISO/IEC 27001:2013, IDT) FREE 4 RM -
1:2016
(Published by Standards Malaysia in 2014) TECHNICAL CORRIGENDUM 1
Information technology- Security techniques - Information security
4990 MS ISO/IEC 27001:2013 management systems - Requirements (First revision) (ISO/IEC 27001:2013, IDT) 34 RM 45.00
(Published by STANDARDS MALAYSIA in 2014)
Teknologi maklumat - Teknik keselamatan - Kod amalan untuk kawalan
4991 MS ISO/IEC 27002:2013 (BM) keselamatan maklumat (Semakan pertama) (ISO/IEC 27002:2013, IDT) 120 RM 165.00
(Diterbitkan oleh Jabatan Standard Malaysia pada tahun 2017)
Information technology - Security techniques - Code of practice for information
MS ISO/IEC 27002:2013, COR.1:
4992 security controls (First revision) (ISO/IEC 27002:2013, IDT) (Published by FREE 5 RM -
2016
Standards Malaysia in 2014) TECHNICAL CORRIGENDUM 1
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
5019 MS ISO 29942:2013 Prophylactic dams - Requirements and test methods (ISO 29942:2011, IDT) 39 RM 60.00
5020 MS ISO 30024:2012 Animal feeding stuffs - Determination of phytase activity (ISO 30024:2009, IDT) 21 RM 30.00
5021 MS ISO 31000:2010 RISK MANAGEMENT - PRINCIPLES AND GUIDELINES (ISO 31000:2009, IDT) 36 RM 60.00
5022 MS IEC/ISO 31010:2011 Risk management - Risk assessment techniques (IEC/ISO 31010:2009, IDT) 94 RM 135.00
MS ISO 32000-1:2010 Document management - Portable document format - Part 1: PDF 1.7 (ISO
5023 762 RM 1,095.00
(CONFIRMED:2015) 32000-1:2008, IDT)
Road traffic safety (RTS) management systems - Requirements with guidance
5024 MS ISO 39001:2013 46 RM 75.00
for use (ISO 39001:2012, IDT)
Occupational health and safety management systems - Requirements with
5025 MS ISO 45001:2018 53 RM 75.00
guidance for use (ISO 45001:2018, IDT)
MS ISO 50001:2011 Energy management systems - requirements with guidance for use (ISO
5026 32 RM 45.00
(CONFIRMED:2015) 50001:2011, IDT)
PRACTICE FOR DOSIMETRY IN GAMMA IRRADIATION FACILITIES FOR FOOD
5027 MS ISO/ASTM 51204:2005 19 RM 30.00
PROCESSING (ISO/ASTM 51204:2002, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS IEC 60034-6:2006 Rotating electrical machines - Part 6: Methods of cooling (IC Code) (IEC 60034-
5041 29 RM 45.00
(CONFIRMED:2013) 6:1991, IDT)
Rotating electrical machines - Part 7: Classification of types of construction,
MS IEC 60034-7:2006
5042 mounting arrangements and terminal box position (IM Code) (IEC 60034- 34 RM 45.00
(CONFIRMED:2013)
7:2001, IDT)
Rotating electrical machines - Part 3: Specific requirements for synchronous
5043 MS IEC 60034-3:2014 generators driven by steam turbines or combustion gas turbines (First revision) 32 RM 45.00
(IEC 60034-3:2007, IDT)
Rotating electrical machines - Part 4: Methods for determining synchronous
5044 MS IEC 60034-4:2014 79 RM 120.00
machine quantities from tests (First revision) (IEC 60034-4:2008, IDT)
Rotating electrical machines - Part 30: Efficiency classes of single-speed,
5045 MS IEC 60034-30:2014 18 RM 30.00
three-phase, cage-induction motors (IE-code) (IEC 60034-30:2008, IDT)
Rotating electrical machines - Part 2-1: Standard methods for determining
5046 MS IEC 60034-2-1:2014 losses and efficiency from tests (excluding machines for traction vehicles) (IEC 80 RM 120.00
60034-2-1:2007, IDT)
5047 MS IEC 60038:2006 IEC STANDARD VOLTAGES (IEC 60038:2002, IDT) 16 RM 30.00
INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS (FIRST
5048 MS 60044-1:2010 64 RM 90.00
REVISION) (IEC 60044-1:2003, MOD)
INTERNATIONAL ELECTROTECHNICAL VOCABULARY - CHAPTER 426:
5049 MS IEC 60050-426:2004 ELECTRICAL APPRATUS FOR EXPLOSIVE ATMOSPHERES (IEC 60050- 47 RM 75.00
426:1990, IDT)
MS 60050-131:2009
5050 Electrotechnical vocabulary Part 131: Circuit theory 73 RM 105.00
(CONFIRMED:2015)
MS IEC 60050-426:2008 International electrotechnical vocabulary - Part 426: Equipment for explosive
5051 122 RM 180.00
(CONFIRMED:2013) atmospheres (First revision) (IEC 60050-426:2008, IDT)
DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING
5052 MS IEC 60051-2:2008 INSTRUMENTS AND THEIR ACCESSORIES - PART 2: SPECIAL REQUIREMENTS FOR 19 RM 30.00
AMMETERS AND VOLTMETERS (FIRST REVISION) (IEC 60051-2:1984, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS IEC 60068-2-21:2008 Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations
5077 37 RM 60.00
(CONFIRMED:2015) and integral Mounting devices (IEC 60068-2-21:2006, IDT)
Environmental testing - Part 2-54: Tests - Test TA: Solderability testing of
MS IEC 60068-2-54:2008
5078 electronic components by the wetting balance method (IEC 60068-2-54:2006, 27 RM 45.00
(CONFIRMED:2015)
IDT)
BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST GA AND
5079 MS IEC 60068-2-7:2007 GUIDANCE: ACCELERATION, STEADY STATE (IEC 60068-2-7:1993, AMENDMENT 21 RM 30.00
1:1986 , IDT)
BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - GUIDANCE
5080 MS IEC 60068-2-9:2007 27 RM 45.00
FOR SOLAR RADIATION TESTING (IEC 60068-2-9:1975, IDT)
BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST T:
5081 MS IEC 60068-2-20:2007 37 RM 60.00
SOLDERING (IEC 60068-2-20:1979 AND AMENDMENT 2:1987, IDT)
MS IEC 60068-2-66:2008 Environmental testing - Part 2: Test methods - Test CX: Damp heat, steady state
5082 25 RM 30.00
(CONFIRMED:2015) (unsaturated pressurized vapour) (IEC 60068-2-66:1994, IDT)
MS IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test EA and guidance: Shock (IEC
5083 45 RM 60.00
(CONFIRMED:2015) 60068-2-27:2008, IDT)
Basic environmental testing procedures - Part 2: Tests - Test Z/AMD: Combined
MS IEC 60068-2-39:2008
5084 sequential cold, low air pressure, and damp heat test (IEC 60068-2-39:1976, 14 RM 15.00
(CONFIRMED:2015)
IDT)
MS IEC 60068-2-44:2008 Environmental testing - Part 2: Tests - guidance on test T: Soldering (IEC 60068-
5085 33 RM 45.00
(CONFIRMED:2015) 2-44:1995, AMD. 1:1995, IDT)
MS IEC 60068-3-4:2008 Environmental testing - Part 3-4: Supporting documentation and guidance -
5086 24 RM 30.00
(CONFIRMED:2015) damp heat tests (IEC 60068-3-4:2001, IDT)
MS IEC 60068-2-10:2007 Basic environmental testing procedures - Part 2-10: Tests - Test J and guidance:
5087 39 RM 60.00
(CONFIRMED:2015) Mould growth (IEC 60068-2-10:2005, IDT)
MS IEC 60068-2-1:2008
5088 Environmental testing - Part 2-1: Tests - Test A: Cold (IEC 60068-2-1:2007, IDT) 24 RM 30.00
(CONFIRMED:2015)
ENVIRONMENTAL TESTING - PART 2-81: TESTS - TEST Ei: SHOCK - SHOCK
5089 MS IEC 60068-2-81:2010 45 RM 60.00
RESPONSE SPECTRUM SYNTHESIS (IEC 60068-2-81:2003, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
5122 MS 60076-1:2015 Power transformers - Part 1: General (First revision) (IEC 60076-1:2011, MOD) 91 RM 135.00
MS IEC 60076-4:2005 Power transformers - Part 4: Guide to the lightning impulse and switching
5123 71 RM 105.00
(CONFIRMED:2013) impulse testing - Power transformers and reactors (IEC 60076-4:2002, IDT)
MS IEC 60076-3:2005 Power transformers - Part 3: Insulation levels, dielectric tests and external
5124 63 RM 90.00
(CONFIRMED:2013) clearances in air (IEC 60076-3: 2000, IDT)
5125 MS IEC 60076-2:2005 POWER TRANSFORMERS - PART 2: TEMPERATURE RISE(IEC 60076-2:1993, IDT) 37 RM 60.00
POWER TRANSFORMERS - PART 5: ABILITY TO WITHSTAND SHORT CIRCUIT(IEC
5126 MS IEC 60076-5:2005 30 RM 45.00
60076-5:2000, IDT)
5127 MS IEC 60076-1:2005 POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2000, IDT) 53 RM 75.00
MS IEC 60076-10:2005 Power transformers - Part 10: Determination of sound levels (IEC 60076-
5128 44 RM 60.00
(CONFIRMED:2013) 10:2001, IDT)
Power transformers - Part 12: Loading guide for dry-type power transformers
5129 MS IEC 60076-12:2012 40 RM 60.00
(IEC 60076-12:2008, IDT)
5130 MS 60076-11:2012 Power transformers - Part 11: Dry-type transformers (IEC 60076-11:2004, MOD) 44 RM 60.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
5161 MS IEC 60085:2013 Electrical insulation - Thermal evaluation and designation (IEC 60085:2007, IDT) 14 RM 15.00
5162 MS IEC 60086-1:2017 Primary batteries - Part 1: General (Fourth revision) (IEC 60086-1:2015, IDT) 51 RM 75.00
Primary batteries - Part 4: Safety of lithium batteries (First revision) (IEC 60086-
5163 MS IEC 60086-4:2017 45 RM 60.00
4:2014, IDT)
5164 MS IEC 60086-3:2010 PRIMARY BATTERIES - PART 3: WATCH BATTERIES (IEC 60086-3:2004, IDT) 28 RM 45.00
PRIMARY BATTERIES - PART 4: SAFETY OF LITHIUM BATTERIES (IEC 60086-
5165 MS IEC 60086-4:2010 37 RM 60.00
4:2007, IDT)
PRIMARY BATTERIES - PART 1: GENERAL (THIRD REVISION) (IEC 60086-1:2006,
5166 MS IEC 60086-1:2010 52 RM 75.00
IDT)
PRIMARY BATTERIES - PART 5: SAFETY OF BATTERIES WITH AQUEOUS
5167 MS IEC 60086-5:2010 40 RM 60.00
ELECTROLYTE (IEC 60086-5:2005, IDT)
PRIMARY BATTERIES - PART 2: PHYSICAL AND ELECTRICAL SPECIFICATIONS
5168 MS IEC 60086-2:2010 62 RM 90.00
(FIRST REVISION) (IEC 60086-2:2006, IDT)
Primary batteries - Part 2: Physical and electrical specifications (Second
5169 MS IEC 60086-2:2017 58 RM 90.00
revision) (IEC 60086-2:2015, IDT)
Primary batteries - Part 5: Safety of batteries with aqueous electrolyte (First
5170 MS IEC 60086-5:2017 43 RM 60.00
revision) (IEC 60086-5:2011, IDT)
RADIO FREQUENCY CABLES - PART 2: RELEVANT CABLE SPECIFICATIONS (FIRST
5171 MS IEC 60096-2:2007 70 RM 105.00
REVISION) (IEC 60096-2:1961 AND AMENDMENT 1:1990, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
5185 MS IEC 60238:2008 EDISON SCREW LAMPHOLDERS (FIRST REVISION) (IEC 60238:2004, IDT) 80 RM 120.00
Electric strength of insulating materials - Test methods - Part 1: Tests at power
5186 MS IEC 60243-1:2014 32 RM 45.00
frequencies (IEC 60243-1:2013, IDT)
Electric strength of insulating materials - Test methods - Part 2: Additional
5187 MS IEC 60243-2:2014 14 RM 15.00
requirements for tests using direct voltage (IEC 60243-2:2001, IDT)
Electric strength of insulating materials - Test methods - Part 3: Additional
5188 MS IEC 60243-3:2014 16 RM 30.00
requirements for 1,2/50 μs impulse tests (IEC 60243-3:2001, IDT)
Insulating liquids - Measurement of relative permittivity, dielectric dissipation
5189 MS IEC 60247:2012 33 RM 45.00
factor (tan δ) and d.c. resistivity (IEC 60247:2004, IDT)
Measuring relays and protection equipment - Part 1: Common requirements
5190 MS IEC 60255-1:2011 51 RM 75.00
(IEC 60255-1:2009, IDT)
Electrical relays - Part 24: Common format for transient data exchange
5191 MS IEC 60255-24:2011 57 RM 90.00
(COMTRADE) for power systems (IEC 60255-24:2001, IDT)
Measuring relays and protection equipment - Part 127: Functional
5192 MS IEC 60255-127:2012 29 RM 45.00
requirements for over/under voltage protection (IEC 60255-127:2010, IDT)
Measuring relays and protection equipment - Part 151: Functional
5193 MS IEC 60255-151:2012 36 RM 60.00
requirements for over/under current protection (IEC 60255-151:2009, IDT)
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on
5194 MS IEC 60255-21-1:2012 measuring relays and protection equipment - Section One: Vibration tests 17 RM 30.00
(sinusoidal) (IEC 60255-21-1:1988, IDT)
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on
5195 MS IEC 60255-21-2:2012 measuring relays and protection equipment: Section Two - Shock and bump 21 RM 30.00
tests (IEC 60255-21-2:1988, IDT)
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on
5196 MS IEC 60255-21-3:2012 measuring relays and protection equipment - Section 3: Seismic tests (IEC 20 RM 30.00
60255-21-3:1993, IDT)
Measuring relays and protection equipment - Part 27: Product safety
5197 MS IEC 60255-27:2012 125 RM 180.00
requirements (IEC 60255-27:2005, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
5211 MS 60269-5:2014 Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses 58 RM 90.00
HIGH-VOLTAGE TEST TECHNIQUES - PARTIAL DISCHARGE MEASUREMENTS (IEC
5212 MS IEC 60270:2010 56 RM 90.00
60270:2000, COR. 1:2000, IDT)
DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO
5213 MS IEC 60300-3-4:2011 THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS (IEC 60300-3-4:2007, 39 RM 60.00
IDT)
DEPENDABILITY MANAGEMENT - PART 1: DEPENDABILITY MANAGEMENT
5214 MS IEC 60300-1:2010 22 RM 30.00
SYSTEMS (IEC 60300-1:2003, IDT)
DEPENDABILITY MANAGEMENT - PART 2: GUIDELINES FOR DEPENDABILITY
5215 MS IEC 60300-2:2010 57 RM 90.00
MANAGEMENT (IEC 60300-2:2004, IDT)
DEPENDABILITY MANAGEMENT - PART 3-1: APPLICATION GUIDE - ANALYSIS
5216 MS IEC 60300-3-1:2010 TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY (IEC 60300-3- 64 RM 90.00
1:2003, IDT)
DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION
5217 MS IEC 60300-3-2:2010 45 RM 60.00
OF DEPENDABILITY DATA FROM THE FIELD (IEC 60300-3-2:2004, IDT)
DEPENDABILITY MANAGEMENT - PART 3-3: APPLICATION GUIDE - LIFE CYCLE
5218 MS IEC 60300-3-3:2011 64 RM 90.00
COSTING (IEC 60300-3-3:2004, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
5330 MS IEC 60475:2011 METHOD OF SAMPLING LIQUID DIELECTRICS (IEC 60475:1974, IDT) 19 RM 30.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS IEC 60598-2-9:2001 Luminaires - Part 2 : Particular requirements section nine - Photo and film
5358 33 RM 45.00
(CONFIRMED:2015) Luminaires (Non-professional) (IEC 60598-2-9:1987, AMD. 1:1993, IDT)
Luminaires - Part 2 : Particular requirements - Section 25 : Luminaires for use in
MS IEC 60598-2-25:2001
5359 clinical areas of hospitals and health care buildings (IEC 60598-2-25:1994 and its 30 RM 45.00
(CONFIRMED:2015)
Corrigendum : 1994, IDT)
Luminaires - Part 2-20: Particular requirements - Lighting chains (Second
5360 MS IEC 60598-2-20:2013 24 RM 30.00
Revision) (IEC 60598-2-20:2010, IDT)
MS IEC 60598-2-10:2006 Luminaires - Part 2-10: Particular requirements - Portable luminaires for
5361 15 RM 15.00
(CONFIRMED:2015) children (First revision) (IEC 60598-2-10:2003, IDT)
LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS - SECTION 19: AIR
MS IEC 60598-2-19:2003
5362 HANDLING LUMINAIRES (SAFETY REQUIREMENTS) (IEC 60598-2-19:1981 and its 29 RM 45.00
(CONFIRMED:2011)
Amendment1:1987 and Amendment 2:1997, IDT)
MS IEC 60598-2-5:2006 Luminaires - Part 2-5: Particular requirements - Floodlights (First revision) (IEC
5363 13 RM 15.00
(CONFIRMED:2015) 60598-2-5:1998, IDT)
MS IEC 60598-2-4:2003 Luminaires - Part 2: Particular requirements - Section 4: Portable general
5364 21 RM 30.00
(CONFIRMED:2015) purpose luminaires (First revision) (IEC 60598-2-4:1997, IDT)
Mineral oil-impregnated electrical equipment in service - Guide to the
5365 MS 60599:2013 36 RM 60.00
interpretation of dissolved and free gases analysis (IEC 60599:2007, MOD)
MEDICAL ELECTRICAL EQUIPMENT – PART 1-8: GENERAL REQUIREMENTS FOR
SAFETY - COLLATERAL STANDARD: GENERAL REQUIREMENTS, TESTS AND
5366 MS IEC 60601-1-8:2007 GUIDANCE FOR ALARM SYSTEMS IN MEDICAL ELECTRICAL EQUIPMENT AND 88 RM 135.00
MEDICAL ELECTRICAL SYSTEMS (IEC 60601-1-8:2005 AND ITS AMENDMENT
1:2006, IDT)
Medical electrical equipment - Part 2-36: Particular requirements for the safety
MS IEC 60601-2-36:2007
5367 of equipment for extracorporeally induced lithotripsy (IEC 60601-2-36:1997, 23 RM 30.00
(CONFIRMED:2013)
IDT)
MEDICAL ELECTRICAL EQUIPMENT – PART 2-38: PARTICULAR REQUIREMENTS
5368 MS IEC 60601-2-38:2007 FOR THE SAFETY OF ELECTRICALLY OPERATED HOSPITAL BEDS (IEC 60601-2- 54 RM 75.00
38:1996 AND ITS AMENDMENT 1:1999, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and
5499 MS IEC 60947-5-4:2012 switching elements - Method of assessing the performance of low-energy 29 RM 45.00
contacts - Special tests (IEC 60947-5-4:2002, IDT)
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment
5500 MS IEC 60947-6-1:2012 50 RM 75.00
- Transfer switching equipment (IEC 60947-6-1:2005, IDT)
Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment -
5501 MS IEC 60947-7-2:2012 Protective conductor terminal blocks for copper conductors (IEC 60947-7- 23 RM 30.00
2:2009, IDT)
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment
5502 MS IEC 60947-6-2:2012 - Control and protective switching devices (or equipment) (CPS) (IEC 60947-6- 133 RM 195.00
2:2007, IDT)
Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety
5503 MS IEC 60947-7-3:2012 42 RM 60.00
requirements for fuse terminal blocks (IEC 60947-7-3:2009, IDT)
Low-voltage switchgear and controlgear - Part 8: Control units for built-in
5504 MS IEC 60947-8:2012 thermal protection (PTC) for rotating electrical machines (IEC 60947-8:2006, 37 RM 60.00
IDT)
MS IEC 60947-1:2010 Low-voltage switchgear and controlgear - Part 1: General rules (Second
5505 238 RM 345.00
(CONFIRMED:2015) revision) (IEC 60947-1:2007, IDT)
MS IEC 60950-1:2007 Information technology equipment - Safety - Part 1: General requirements (First
5506 311 RM 450.00
(CONFIRMED:2013) revision) (IEC 60950-1:2005, IDT)
MS IEC 60950-21:2007 Information technology equipment - Safety - Part 21: Remote power feeding
5507 24 RM 30.00
(CONFIRMED:2013) (IEC 60950-21:2002, IDT)
MS IEC 60950-23:2007 Information technology equipment - Safety - Part 23: Large data storage
5508 14 RM 15.00
(CONFIRMED:2013) equipment (IEC 60950-23:2005, IDT)
MS IEC 60958-3:2011
5509 Digital audio interface - Part 3: Consumer applications (IEC 60958-3:2006, IDT) 70 RM 105.00
(CONFIRMED:2015)
5510 MS IEC 60958-1:2011 DIGITAL AUDIO INTERFACE - PART 1: GENERAL (IEC 60958-1:2008, IDT) 35 RM 45.00
MS IEC 60958-4:2011 Digital audio interface - Part 4: Professional applications (IEC 60958-4:2008,
5511 25 RM 30.00
(CONFIRMED:2015) IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
5516 MS IEC 60983:2010 MINIATURE LAMPS (FIRST REVISION) (IEC 60983:2005, IDT) 49 RM 75.00
MS IEC 60998-1:2005 Connecting devices for low-voltage circuits for household and similar purposes -
5517 31 RM 45.00
(CONFIRMED:2015) Part 1: General requirements (IEC 60998-1:2002, IDT)
Connecting devices for low-voltage circuits for household and similar purposes -
MS IEC 60998-2-1:2005
5518 Part 2-1: Particular requirements for connecting devices as separate entities 38 RM 60.00
(CONFIRMED:2015)
with screw-type clamping units (IEC 60998-2-1:2002, IDT)
Connecting devices for low-voltage circuits for household and similar purposes -
MS IEC 60998-2-2:2005
5519 Part 2-2: Particular requirements for connecting devices as separate entities 32 RM 45.00
(CONFIRMED:2015)
with screwless-type clamping units (IEC 60998-2-2:2002, IDT)
Connecting devices for low-voltage circuits for household and similar purposes -
MS IEC 60998-2-3:2005
5520 Part 2-3: Particular requirements for connecting devices as separate entities 31 RM 45.00
(CONFIRMED:2015)
with insulation-piercing clamping units (IEC 60998-2-3:2002, IDT)
Connecting devices for low-voltage circuits for household and similar purposes -
MS IEC 60998-2-4:2005
5521 Part 2-4: Particular requirements for twist-on connecting devices (IEC 60998-2- 33 RM 45.00
(CONFIRMED:2015)
4:2002, IDT)
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement
5522 MS 61000-4-11:2015 methods-Voltage dips, short interruptions and voltage variations immunity 32 RM 45.00
tests (Second revision) (IEC 61000-4-11:2004, MOD)
ELECTROMAGNETIC COMPATIBILITY (EMC) – PART 2-4: ENVIRONMENT –
MS IEC 61000-2-4:2005
5523 COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY 90 RM 135.00
(CONFIRMED:2011)
CONDUCTED DISTURBANCES (FIRST REVISION) (IEC 61000-2-4:2002, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS IEC 61049:1999 Capacitors for use in tubular fluorescent and other discharge lamp circuits
5574 24 RM 30.00
(CONFIRMED:2015) performance requirements (IEC 61049:1991, IDT)
Transformers for tubular discharge lamps having a no-load output voltage
MS ISO 61050:2001
5575 exceeding 1000 v (generally called neon-transformers) general and safety 55 RM 75.00
(CONFIRMED:2015)
requirements (IEC 61050 : 1991 and its amendment 1 :1994, IDT)
Instruments and software used for measurement in high-voltage impulse tests -
5576 MS IEC 61083-1:2011 40 RM 60.00
Part 1: Requirements for instruments (IEC 61083-1:2001, IDT)
CABLE TRUNKING AND DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS –
5577 MS IEC 61084-1:2006 PART 1: GENERAL REQUIREMENTS (IEC 61084-1:1991 AND ITS AMENDMENT 38 RM 60.00
1:1993, IDT)
TUMBLE DRYERS FOR HOUSEHOLD USE - METHODS FOR MEASURING THE
5578 MS IEC 61121:2011 33 RM 45.00
PERFORMANCE (IEC 61121:2005,IDT)
MS IEC 61126:2001 Procedure for use in the preparation of maximum lamp outlines (IEC
5579 67 RM 105.00
(CONFIRMED:2015) 61126:1992 and its amendment 1 :1996, IDT)
Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link
5580 MS IEC 61158-3-2:2011 50 RM 75.00
layer service definition - Type 2 elements (IEC 61158-3-2:2007, IDT)
Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link
5581 MS IEC 61158-3-1:2011 129 RM 180.00
layer service definition - Type 1 elements (IEC 61158-3-1:2007, IDT)
Industrial communication networks - Fieldbus specification - Part 2: Physical
5582 MS IEC 61158-2:2011 406 RM 585.00
layer specifications and service definition (IEC 61158-2:2010, IDT)
Industrial communication networks - Fieldbus specification - Part 1: Overview
5583 MS 61158-1:2011 74 RM 105.00
and guidance for the IEC 61158 and IEC 61784 series
5587 MS IEC 61184:2014 Bayonet lampholders (First revision) (IEC 61184:2008, IDT) 68 RM 105.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
5653 MS 61592:2014 Household electrical appliances - Guidelines for consumer panel testing 16 RM 30.00
ENCLOSED LOW-VOLTAGE POWER SWITCHGEAR AND CONTROLGEAR
5654 MS 61641:2012 ASSEMBLIES - GUIDE FOR TESTING UNDER CONDITIONS OF ARCING DUE TO 16 RM 30.00
INTERNAL FAULT
COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 341:
MS IEC 61643-341:2004
5655 SPECIFICATION FOR THYRISTOR SURGE SUPPRESSORS (TSS) (IEC 61643- 68 RM 105.00
(CONFIRMED:2011)
341:2001, IDT)
MS IEC 61643-331:2004 COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 331:
5656 23 RM 30.00
(CONFIRMED:2011) SPECIFICATION FOR METAL OXIDE VARISTORS (MOV) (IEC 61643-331:2003, IDT)
LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 22: SURGE PROTECTIVE
MS IEC 61643-22:2008
5657 DEVICES CONNECTED TO TELECOMMUNICATIONS AND SIGNALLING NETWORKS 56 RM 90.00
(CONFIRMED:2011)
- SELECTION AND APPLICATION PRINCIPLES (IEC 61643-22:2004, IDT)
MS IEC 61643-311:2004 COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 311:
5658 26 RM 45.00
(CONFIRMED:2011) SPECIFICATION FOR GAS DISCHARGE TUBES (GDT) (IEC 61643-311:2001, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
5685 MS 61836:2010 (CONFIRMED:2015) Solar photovoltaic energy systems - Terms, definitions and symbols 92 RM 135.00
Communication networks and systems for power utility automation - Part 7-3:
5686 MS 61850-7-3:2013 Basic communication structure - Common data classes (IEC 61850-7-3:2010, 98 RM 105.00
MOD)
Communication networks and systems for power utility automation - Part 7-4:
5687 MS 61850-7-4:2013 Basic communication structure - Compatible logical node classes and data 186 RM 270.00
object classes (IEC 61850-7-4:2010, MOD)
Communication networks and systems in substations - Part 2: Glossary (IEC/TS
5688 MS IEC/TS 61850-2:2011 47 RM 75.00
61850-2:2003, IDT)
Communication networks and systems in substations - Part 1: Introduction and
5689 MS 61850-1:2011 43 RM 60.00
overview
Communication networks and systems for power utility automation - Part 8 -1:
5690 MS 61850-8-1:2014 Specific communication service mapping (SCSM) - Mappings to MMS (ISO 9506- 198 RM 285.00
1 and ISO 9506-2) and to ISO/IEC 8802-3 (IEC 61850-8-1:2011, MOD)
Communication networks and systems for power utility automation - Part 7-1:
5691 MS 61850-7-1:2012 Basic communication structure - Principles and models (IEC 61850-7-1:2011, 138 RM 195.00
MOD)
Communication networks and systems for power utility automation -
5692 MS 61850-6:2014 Part 6: Configuration description language for communication in 217 RM 315.00
electrical substations related to IEDs (IEC 61850-6:2009, MOD)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
Communication networks and systems for power utility automation - Part 7-2:
5693 MS 61850-7-2:2014 Basic Information and communication structure - Abstract communication 220 RM 315.00
service interface (ACSI) (IEC 61850-7-2:2010, MOD)
Electric vehicle conductive charging system - Part 1: General requirements (IEC
5694 MS 61851-1:2013 55 RM 75.00
61851-1:2010, MOD)
Electric vehicle conductive charging system - Part 22: AC electric vehicle
5695 MS IEC 61851-22:2013 28 RM 45.00
charging station (IEC 61851-22:2001, IDT)
Electric vehicle conductive charging system - Part 21: Electric vehicle
5696 MS IEC 61851-21:2013 requirements for conductive connection to an a.c./d.c. supply (IEC 61851- 21 RM 30.00
21:2001, IDT)
MS IEC 61855:2008 Household electrical hair care appliances - Methods of measuring the
5697 28 RM 45.00
(CONFIRMED:2013) performance (IEC 61855:2003, MOD)
Household electrical appliances - Method of measuring performance -
5698 MS 61923:2014 22 RM 30.00
Assessment of repeatability and reproducibility
AUDIO, VIDEO AND AUDIOVISUAL SYSTEMS - INTERCONNECTIONS AND
5699 MS IEC 61938:2011 MATCHING VALUES - PREFERRED MATCHING VALUES OF ANALOGUE SIGNALS 30 RM 45.00
(IEC 61938:1996, IDT)
Energy management system application program interface (EMS-API) - Part
5700 MS IEC 61970-501:2012 501: Common information model resource description framework (CIM RDF) 24 RM 30.00
schema (IEC 61970-501:2006, IDT)
Energy management system application program interface (EMS-API) - Part 1:
5701 MS IEC 61970-1:2011 46 RM 75.00
Guidelines and general requirements (IEC 61970-1:2005, IDT)
Energy management system application program interface (EMS-API) - Part
5702 MS IEC 61970-301:2012 267 RM 390.00
301: Common information model (CIM) base (IEC 61970-301:2011, IDT)
MS IEC 61995-1:2005 Devices for the connection of luminaires for household and similar purposes -
5703 71 RM 105.00
(CONFIRMED:2015) Part 1: General requirements (IEC 61995-1:2005, IDT)
MS IEC 62018:2007 Power consumption of information technology equipment - Measurement
5704 14 RM 15.00
(CONFIRMED:2013) methods (IEC 62018:2003, IDT)
MS IEC 62019:2007 Electrical accessories - Circuit-breakers and similar equipment for household
5705 42 RM 60.00
(CONFIRMED:2013) use - Auxiliary contacts units (IEC 62019:2003, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
5742 MS IEC 62115:2017 Electric toys - Safety (Second revision) (IEC 62115:2010, IDT) 45 RM 60.00
5743 MS 62115:2008 ELECTRIC TOYS – SAFETY (FIRST REVISION) (IEC 62115: 2003, MOD) 42 RM 60.00
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
MS 62257-1:2009 Recommendations for small renewable energy and hybrid systems for rural
5756 13 RM 15.00
(CONFIRMED:2015) electrification - Part 1: General introduction to rural electrification
MS 62257-3:2009 Recommendations for small renewable energy and hybrid systems for rural
5757 54 RM 75.00
(CONFIRMED:2015) electrification - Part 3: Project development and management
Recommendations for small renewable energy and hybrid systems for rural
MS 62257-8-1:2010 electrification - Part 8-1: Selection of batteries and battery management
5758 30 RM 45.00
(CONFIRMED:2015) systems for stand-alone electrification systems - Specific case of automotive
flooded lead-acid batteries available in developing countries
Recommendations for small renewable energy and hybrid systems for rural
5759 MS 62257-9-1:2012 60 RM 90.00
electrification - Part 9-1: Micropower systems (IEC/TS 62257-9-1:2008, IDT)
Recommendations for small renewable energy and hybrid systems for
5760 MS 62257-9-2:2012 54 RM 75.00
rural electrification - Part 9-2: Microgrids (IEC/TS 62257-9-2:2006, IDT)
Recommendations for small renewable energy and hybrid systems for rural
5761 MS 62257-9-3:2012 electrification - Part 9-3: Integrated system - User interface (IEC/TS 62257-9- 19 RM 30.00
3:2006, IDT)
Recommendations for small renewable energy and hybrid systems for rural
5762 MS 62257-9-4:2012 electrification - Part 9-4: Integrated system - User installation (IEC/TS 62257-9- 27 RM 45.00
4:2006, IDT)
MS 62257-7:2010 Recommendations for small renewable energy and hybrid systems for rural
5763 18 RM 30.00
(CONFIRMED:2015) electrification - Part 7: Generators
High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-
5764 MS IEC 62271-203:2017 enclosed switchgear for rated voltages above 52 kV (First revision) (IEC 62271- 83 RM 120.00
203:2011, IDT)
High-voltage switchgear and controlgear - Part 100: Alternating current circuit-
5765 MS IEC 62271-100:2017 387 RM 555.00
breakers (First revision) (IEC 62271-100:2008, AMD. 1:2012, IDT)
High-voltage switchgear and controlgear - Part 200: AC metal-enclosed
5766 MS IEC 62271-200:2017 switchgear and controlgear for rated voltages above 1 kV and up to and 93 RM 135.00
including 52 kV (First revision) (IEC 62271-200:2011, IDT)
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 102: ALTERNATING
5767 MS IEC 62271-102:2007 93 RM 135.00
CURRENT DISCONNECTORS AND EARTING SWITCHES (IEC 62271-102: 2001, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
5801 MS 62504:2012 General lighting - LEDs and LED modules - Terms and definitions 19 RM 30.00
Battery charge controllers for photovoltaic systems - Performance and
5802 MS IEC 62509:2012 33 RM 45.00
functioning (IEC 62509:2010, IDT)
5803 MS IEC 62532:2013 Fluorescent induction lamps - Safety specifications (IEC 62532:2011, IDT) 30 RM 45.00
5804 MS 62545:2011 Environmental information on electrical and electronic equipment (EIEEE) 24 RM 30.00
Household refrigerating appliances - Characteristics and test methods - Part 2:
5805 MS IEC 62552-2:2016 48 RM 75.00
Performance requirements (Second revision) (IEC 62552-2:2015)
Household refrigerating appliances - Characteristics and test methods - Part 3:
5806 MS IEC 62552-3:2016 160 RM 225.00
Energy consumption and volumes (Second revision) (IEC 62552-3:2015, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
5817 MS 62717:2012 (P) LED modules for general lighting - Performance requirements 44 RM 60.00
5818 MS 62722-2-1:2012 Luminaire performance - Part 2-1: Particular requirements for LED luminaires 20 RM 30.00
Luminaire performance - Part 1: General requirements (First revision) (IEC
5819 MS IEC 62722-1:2017 23 RM 30.00
62722-1:2014, IDT)
Luminaire performance - Part 2-1: Particular requirements for LED luminaires
5820 MS IEC 62722-2-1:2017 23 RM 30.00
(First revision) (IEC 62722-2-1: 2014, IDT)
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
5825 MS 46:2016 Specification for ground phosphate rock, agricultural grade (Third Revision) 10 RM 15.00
The Analysis of fertilizers- Part 1: Method of sampling and sample preparation
5826 MS 417-1:2017 13 RM 15.00
(Second Revision)
5827 MS 2627:2017 Detection of porcine DNA- Test method- Food and Food products 19 RM 30.00
5828 MS 2626:2016 CONSUMER PRODUCT SAFETY AND RECALL GUIDANCE IN THE SUPPLY CHAIN 67 RM 105.00
Code of Practice on Energy Efficientcy and conservation for industrial electrical
5829 MS 2578-3:2014 37 RM 60.00
equipment- Part 3: Motors
Code of Practice on Energy Efficientcy and conservation for industrial electrical
5830 MS 2578-2:2014
equipment- Part 2: Cooling towers 23 RM 30.00
Code of Practice on Energy Efficientcy and conservation for industrial electrical
5831 MS 2578-1:2014 54 RM 75.00
equipment- Part 1: Fans
5833 MS 2716:2019 Electronic Cigeratte device- Safety requirements and test methods 17 RM 30.00
Eurocode 3- Design of steel structures- Part 1-3: General rules - Supplementary
5834 MSEN 1993 PART 1-3:2019 137 RM 195.00
rules for cold-formed members and sheeting
as of March 2019
PRICE LIST OF MALAYSIAN STANDARD (MS)
All prices are based on Standards Malaysia (Fees) Regulations 2018
as of March 2019