Professional Documents
Culture Documents
Technical data/Typical properties∗ Protect glass, metal, and other porous substrates
∗
Properties listed are only for guidance and are not from overspray. ProtectosilANTIGRAFFITI will
a guarantee of performance not etch glass but will leave a residue on non-
porous surfaces. Some darkening of the surface
Colour Light Yellow
may occur depending on the amount of
Density 1.06
ProtectosilANTIGRAFFITI applied and the colour
pH 4
and texture of the substrate. It is required to apply
Flash Point >90
a test patch to verify actual condition on the
Viscosity 1.6
substrate.
Installation
Packaging
Concrete must be allowed to cure for a minimum of
ProtectosilANTIGRAFFITI is supplied in 200 litre
28 days. All repainting must be completed and
and 20 litre containers.
allowed to cure at least 3 days. Concrete repair and
replacement must be completed before application of
Precautions: The ProtectosilANTIGRAFFITI
ProtectosilANTIGRAFFITI . Patching materials,
product containers should be kept closed when not
caulking, sealing materials and traffic paints must
in use and should be stored at temperatures
be fully cured before application. 0 0
between 3 C and 40 C, and away from rain and
standing water.
All surfaces must be cleaned to remove all traces of
graffiti, dirt, dust, effloresence, mold, salt, grease,
Graffiti Removal
oil asphalt, laitance, curing compounds, paint,
ProtectosilANTIGRAFFITI is designed to allow
coatings and other foreign materials. Acceptable
easy removal of paint, markers and other types of
surface cleaning methods include shot blasting,
graffiti from concrete, masonry and natural stone
sandblasting, water blasting and chemical cleaners.
substrates. Acceptable methods to remove graffiti
Check with your local Protectocil representative to
include: commercial paint removers, graffiti
verify that surface preparation is adequate.
cleaners, high pressure water, steam cleaning and
proprietary cleaners, contact your BASF
ProtectosilANTIGRAFFITI should be applied using
Construction Chemicals representative.
rollers, brushes, or equipment that will not atomize
the material. If power rolling use, a roller with a 1”
If high pressure water is used, care must be taken
nap. Do not apply a wet or damp substrate. Do not
so as to not etch the substrate. Removing the
alter or dilute the material.
Whilst any information contained herein is true, accurate and represents our best knowledge and experience, no warranty is given or
implied with any recommendations made by us, our representatives or distributors, as the conditions of use and the competence of any
labour involved in the application are beyond our control.
As all BASF’s technical datasheets are updated on a regular basis it is the user's responsibility to obtain the most recent issue.
BASF Construction Chemicals South Africa (Pty) Ltd
P.O. Box 420, Westonaria, 1780 852 Sixteenth Road, Midrand
11 Pullinger Street, Westonaria, 1779 PO Box 2801, Halfway House, 1685
Tel: +27 11 754 1343 Tel: +27 11 203 2405
Fax: +27 11 754 1105
Website : basf -cc.co.za