Professional Documents
Culture Documents
General Instructions:
The test is of 3 hours duration. There are a total of 9 questions carrying 50 marks.
Question numbers 1 - 8 are technical based questions with a word limit of 50-70 words.
Question number 9 is an Article writing question with the word limit of minimum 200 words.
The font style to be used in the test is “Times New Roman” and the font style for the same should
be “12”.
Only Scientific Calculator is allowed. Charts, graph sheets, tables, cellular phone or other
electronic gadgets are NOT to be used during the test.
We follow a “Zero Tolerance Policy” towards plagiarism (Copying content directly from the
internet or any other source). Plagiarism is to be strictly avoided.
In order to proceed to the next stage, all of the following criteria need to be fulfilled by the
candidate:
All the very best!! You may now begin your test.
Theory Based Questions (Online Mode)
Ans.
Ans:
Q3. What is the basic difference between air conditioning and refrigeration?( 5 marks)
Ans:
Numerical Based Questions (Offline Mode)
Q4. The moment of inertia of a flywheel is 19.6 kg m and it fluctuates at the speed of 40 rpm for the
2
Q5. A uniformly distributed load of magnitude 3 kN/m is distributed over the cantilever beam of
length 5 m . It also carries a concentrated load of 7 kN at the free end and 10 kN at the distance
of 3 m from the fixed end. Draw the shear force and the bending moment diagram. (5 marks)
Q7. Consider the truss PQR loaded at the point P with force F as shown in figure below.
Q.8. An engine working on the Otto cycle is supplied with air at 0.1 MPa , 35C . The compression
ratio is 8 and the heat supplied is 2100 kJ/kg . Calculate:
A. Cycle Efficiency
B. Maximum temperature and pressure of the cycle
C. Net work done.
Language Based Question (Online Mode)
Q.9. Write down a short article on the topic “Effects of social media on the younger generation”.
(10 marks)
Ans: