Power Source Engine Control (2AZ-FSE, 1AZ-FSE) Engine Control (2AZ-FSE, 1AZ-FSE) Engine Control (2AZ-FSE, 1AZ-FSE) Engine Control (2AZ-FSE, 1AZ-FSE) Cruise Control (2AZ-FSE, 1AZ-FSE)
Cylinders 4 Teeth per turn(incl miss) 60 Teeth per firing 30 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:895 Ref:Volvo406.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 2 Teeth per firing 1 Modes 10 System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:896 Ref:Volvo740.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 10 Teeth per turn(incl miss) 60 Teeth per firing 12 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:897 Ref:Volvo664.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 10 Teeth per turn(incl miss) 60 Teeth per firing 12 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:898 Ref:Volvo660.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 10 Teeth per turn(incl miss) 60 Teeth per firing 12 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:899 Ref:Volvo661.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 10 Teeth per turn(incl miss) 60 Teeth per firing 12 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:900 Ref:Volvo662.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 10 Teeth per turn(incl miss) 60 Teeth per firing 12 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:901 Ref:Volvo663.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Model: V70 5cyl Turbo Year: Comments: RPM readings double ECU Location: Behind right hand headlight.
Click here to return to Volvo Menu.
ECU Pin Out
Wiring Diagram Global Settings
Cylinders 10 Teeth per turn(incl miss) 60 Teeth per firing 12 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:886 Ref:Volvo371.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 60 Teeth per firing 30 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:887 Ref:Volvo372.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 60 Teeth per firing 30 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:888 Ref:Volvo373.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 60 Teeth per firing 30 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:889 Ref:Volvo374.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 60 Teeth per firing 30 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:890 Ref:Volvo379.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 60 Teeth per firing 30 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:891 Ref:Volvo375.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 60 Teeth per firing 30 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:892 Ref:Volvo376.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 60 Teeth per firing 30 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:893 Ref:Volvo377.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 60 Teeth per firing 30 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:894 Ref:Volvo378.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 2 Teeth per firing 1 Modes 10 System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:884 Ref:Volvo834.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 2 Teeth per firing 1 Modes 10 System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:885 Ref:Volvo833.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 10 Teeth per turn(incl miss) 60 Teeth per firing 12 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:879 Ref:Volvo380.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 10 Teeth per turn(incl miss) 60 Teeth per firing 12 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:880 Ref:Volvo381.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 10 Teeth per turn(incl miss) 60 Teeth per firing 12 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:881 Ref:Volvo382.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 6 Teeth per turn(incl miss) 60 Teeth per firing 20 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:882 Ref:Volvo383.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 6 Teeth per turn(incl miss) 60 Teeth per firing 20 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:883 Ref:Volvo384.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 2 Teeth per firing 1 Modes 10 System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:867 Ref:Volvo847.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Model: 850 2.4L Year: 1995 Comments: Not sure of the MAS signal, could also be A8 or A12 ECU Location:
Click here to return to Volvo Menu.
ECU Pin Out
Wiring Diagram Global Settings
Cylinders 4 Teeth per turn(incl miss) 2 Teeth per firing 1 Modes 10 System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:868 Ref:Volvo876.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 2 Teeth per firing 1 Modes 10 System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:869 Ref:Volvo748.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 2 Teeth per firing 1 Modes 10 System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:870 Ref:Volvo749.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 2 Teeth per firing 1 Modes 10 System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:871 Ref:Volvo741.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 2 Teeth per firing 1 Modes 10 System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:872 Ref:Volvo742.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 2 Teeth per firing 1 Modes 10 System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:873 Ref:Volvo743.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 2 Teeth per firing 1 Modes 10 System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:874 Ref:Volvo744.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 2 Teeth per firing 1 Modes 10 System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:875 Ref:Volvo745.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 2 Teeth per firing 1 Modes 10 System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:876 Ref:Volvo746.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 4 Teeth per turn(incl miss) 2 Teeth per firing 1 Modes 10 System Config Positive input pol ON Positive output pol ON Low level input OFF High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:877 Ref:Volvo747.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Cylinders 6 Teeth per turn(incl miss) 60 Teeth per firing 20 Modes 1 System Config Positive input pol ON Positive output pol ON Low level input ON High frequency OFF Interlaced OFF One missing tooth OFF Lambda Input OFF
Click here for an
explanation on how to use the global settings.
Copyright Digital Technology Date:24 Mar 2004 Page:878 Ref:Volvo385.pdf
The above Global Settings are additions to the Default SMT6 Map. Disclaimer: Please note that as a result of the ECU pin out variations for this vehicle worldwide, this Wiring Diagram is to be used as a guideline only. Digital Technology will not be held responsible in any way for incorrect wiring information contained hereon.
Power Source Engine Control (2AZ-FSE, 1AZ-FSE) Engine Control (2AZ-FSE, 1AZ-FSE) Engine Control (2AZ-FSE, 1AZ-FSE) Engine Control (2AZ-FSE, 1AZ-FSE) Cruise Control (2AZ-FSE, 1AZ-FSE)