SPECIFICATION of GARBAGE OPEN TIPPER on Ashok Leyland DOST
Material All MS Prime Steel Material is Used.
Panneling ( Bottom & Two MS Prime Sheets Shall be of 2mm thick. Sides ) Panneling ( Top & Openable MS Prime Sheets of 1.6mm thick. Lead ) 1.6mm MS Prime Sheets & Verticle support , 2 nos from 25 X 25 X Panneling ( Front ) 1.6mm sq. pipe. Volumetric Capacity As per drawing approved Carrying Capacity Municipal Solid Waste. All MIG weld construction of ISMC 75 MS channel on border & middle of container shell section of 50 X 25 X 1.6mm for other supporting Closed Body Tipper members, reinforced adequately on the load members, mounted on chassis with nuts & bolts. Container strcture made from 75 X 40 X 2mm MS Rectangular pipe. Made from 40 X 40 X 2mm MS Square pipe with fitted of 1.6mm MS Rear Tail Gate Sheets. Tippeing Angle Upto 40 to 45 Degree. Overall Dimension of Closed Overall dimension as per drawing Body Tipper Liftwell / Hypratek make hydraulic cylinder with hard chrome & PU Hydraulic Cylinder seals. Scissor Made from 6mm mild steel material with EN8 bushing systems. Hydrolic System Using Hypratek make systems sufficient capacity. Inside : Epoxy black, Outside : 2 coats of zinc base primer with 2 coats Painting of auto paints. 1) All welding work will be MIG welding. 2) MS Channel, MS Sheets, Angle, MS flat etc are as per indian standard. 3) Fitting of battery cover.
LAXMI AUTO BODY BUILDERS
E-Mail : info@laxmiauto.com Website : www.laxmiauto.com Works : Plot No : 3/B, N. H. No : 48, GIDC, Ankleshwar - 393 002 Tel. (02646) 222244 Office : "Shree Ganesh Nivas", 9/190, Pagathia Sheri, Wadifalia, Surat - 395 003 Mob: 9879000404, 9879005511