Professional Documents
Culture Documents
N2xsy Xlpe PVC Cable 610 12 KV PDF
N2xsy Xlpe PVC Cable 610 12 KV PDF
The electrical and dimensional properties of this product are measured by the
CONSTRUCTION Technical and Quality Assurance department at the Eland Cables laboratory. Cable
performance in respect of conductor resistance, construction quality (workmanship),
Conductor dimensional consistency, and other parameters are verified to published standards
Stranded copper conductor and approved product drawings. Conformance to RoHS (Restriction of the use of
Hazardous Substances) is determined and confirmed.
Inner Semi-Conductive Layer
Semi-conductive material
CHARACTERISTICS
Insulation
XLPE (Cross-Linked Polyethylene) Voltage Rating (Uo/U)(Um)
6/10 (12)kV
Outer Semi-Conductive Layer
Semi-conductive material Test Voltage
21kV
Screen
Copper wires Temperature Rating
Fixed: -20°C to +70°C
Sheath Flexed: -5°C to +70°C
PVC (Polyvinyl Chloride)
Short Circuit Temperature
+250°C
Sheath Colour
Red
ISSUE NO 01-03 -2014
DIMENSIONS
ELAND PART NO. NO. OF NOMINAL CROSS MINIMUM OVERALL MAXIMUM OVERALL NOMINAL WEIGHT
CORES SECTIONAL AREA DIAMETER DIAMETER kg/km
mm mm
Conductor Copper Wire Screen
mm² mm²
ELECTRICAL CHARACTERISTICS
ELAND PART NO. NO. OF NOMINAL CROSS CURRENT CARRYING CAPACITY
CORES SECTIONAL AREA
The information contained within this datasheet is for guidance only and is subject to change without notice or liability. All the information is provided in good faith and is believed to be correct at the time of
publication. When selecting cable accessories, please note that actual cable dimensions may vary due to manufacturing tolerances.