Preprocessing Capability Optimized PLC performance Main Applications
The CPX modular electrical CPX-FEC for a modular PLC with • Autonomous, manual terminal is now available with an IP65/IP67 protection – direct workstations embedded PLC for preprocessing. mounting to the machine reduces • Linked, autonomous The CPX-FEC was created by installation costs. CPX-FEC subsystems integrating the time tested front-end performance: the number of • Automation with IT controller into the CPX electrical connectable sensors and terminal with any fieldbus. actuators (memory capacity) and Basically, the CPX-FEC can be used speeds (cycle time) are ideally throughout the entire CPX-FEC for a Programmable Valve matched to the CPX terminal. factory automation market, as well Terminal as in the process industry The CPX-FEC supports all CPX Ethernet Enabled to some extent (intelligent slave modules, as well as VTSA and MPA Facilitates integration into the IT solutions are in demand here, valve manifolds, and the new world. This includes web server, in particular linked to Modbus/ TCP). technology modules such as the Email, and file transfer CPX-CP interface for simple capabilities. connection to CPV valve manifolds. CPX-FEC.PSI.US For more information: www.festo.com/us/cpx Product Short Information Embedded Controller with the CPX-FEC
In combination with CPX Type CPX-FEC-1-IE
terminal platform technology, Protection class IP65/IP67 the CPX-FEC facilitates Display 4 LEDs (CPX-specific) 4 LEDs for FEC and Ethernet Operator controls • DIL switch for operating modes implementation of the following • Rotary switch for RUN/STOP and program selection basic control concepts: Interfaces/connections • Serial interface (Sub-D, RS 232) for connecting a PC to programming and • Stand-alone operation as a control units, e.g. FED Front-End Display front-end controller or • Ethernet 10/100 BaseT (RJ45) for connection to the network programmable valve terminal • Service interface (M12) for connecting the handheld CPX-MMI mounted directly to the machine Memory capacity • Approx. 250 kByte for FST user programs • Approx. 550 kByte for web applications • Remote fieldbus controller (in Cycle time 1 ... 2 ms for 1k statement combination with fieldbus Programming software FST 4 statement list and ladder diagram nodes for Interbus, Profibus-DP, Ethernet • Web server, SMTP (e-mail), TFTP (file transfer) CANopen, DeviceNet or CC-Link) • Modbus/TCP (I/O data transfer in Schneider automation environment) as preprocessing unit for • EasyIP (I/O data transfer in Festo environment) decentralized, autonomous System expansion • Complete CPX periphery subsystems • Remote Ethernet controller as Control Architecture Remote Controller Ethernet preprocessing unit for decentralized, autonomous subsystems using IT • Remote I/O at the Ethernet as a Standard-PC/Web
solution for integration into
Remote Controller Fieldbus Schneider Electric automation systems (Modbus TCP) including use of IT