Professional Documents
Culture Documents
Site A
Name
Location
Site B
Name
Location
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of
Alcatel-Lucent.
This document is created as described in the Chapter Line-Up and Commissioning of the: 9400AWY User
Mannual/Guide associated to the employed SWP 9400AWY version
Please refer to the User Manual cited above to retrieve updated information you may need, in particular:
• Chapter TECHNICAL SPECIFICATIONS, for all technical characteristics like:
• Transmitted Power at antenna port
• System Characteristics and BER intrusive thresholds
• Chapter ODU INSTALLATION COMPONENTS, for detailed information regarding ODU Part Numbers and
related frequency shifters and frequency bands
2. SYSTEM INSTALLATION AND CABLING VISUAL INSPECTION
SITE A SITE B
INDOOR INSTALLATION VISUAL INSPECTION CHECK
OK NOK OK NOK
Check Service Channel cabling and labelling on DDF (if foreseen by plant doc.)
Check Housekeeping alarm cabling and labelling on DDF (if foreseen by plant doc.)
SITE A SITE B
OUTDOOR INSTALLATION VISUAL INSPECTION CHECK
OK NOK OK NOK
SITE A SITE B
Flash Card
Traffic Plugin:
17-32E1 I/O SCSI 68-pin
Audio + ESC channel plugin
Coupler
Antenna 1
Antenna 2
SITE A SITE B
Polarization
Diameter
4. LINK CONFIGURATION SUMMARY
SITE A SITE B
Active Software Release
Standby Software Release
SW license string
Link identifier configuration
Link identifier enable
Value expected/Value sent
Frequency and Power parameters
Channel 1 Channel 0 Channel 1 Channel 0
Tx Frequency (MHz)
Rx Frequency (MHz)
Tx power (dBm)
ATPC Range - PTX Min Value (dBm)
ATPC Range - PTX Max Value (dBm)
ATPC Rx Threeshold - Low Power (dBm)
Rx level reading (dBm)
Rx level calculated (dBm)
Automatic Restoration Criteria (1+1 only)
MUX/DEMUX (optional)
HST TX (optional)
RADIO
Overhead configuration (optional)
User Service Channel Type
EOW Phone Number
5. NETWORK ELEMENT CONFIGURATION
SITE A
IP Address:
OSPF AREA Configuration
AREA ID (0 - 3) IP Address
Stub Flag IP Mask
AREA ID (0 - 3) IP Address
Stub Flag IP Mask
AREA ID (0 - 3) IP Address
Stub Flag IP Mask
NMS IP Point-to-Point Interface Configuration
Interface Status Remote IP Address OSPF
NMS V11 Enabled Disabled
NMS G703 Enabled Disabled
NMS Radio Site Enabled Disabled
Ethernet (OS) configuration
Enabled Disabled IP Address
IP Routing IP Mask
IP static routing configuration
Host Network IP Address
IP Address
Default Gateway IP Address
Point to Point Interface Index RF V11 G703
Host Network IP Address
IP Address
Default Gateway IP Address
Point to Point Interface Index RF V11 G703
Host Network IP Address
IP Address
Default Gateway IP Address
Point to Point Interface Index RF V11 G703
Network Time Protocol
Enabled Disabled Main Server
Spare Server
SITE B
IP Address:
OSPF AREA Configuration
AREA ID (0 - 3) IP Address
Stub Flag IP Mask
AREA ID (0 - 3) IP Address
Stub Flag IP Mask
AREA ID (0 - 3) IP Address
Stub Flag IP Mask
NMS IP Point-to-Point Interface Configuration
Interface Status Remote IP Address OSPF
NMS V11 Enabled Disabled
NMS G703 Enabled Disabled
NMS Radio Site Enabled Disabled
Ethernet (OS) configuration
Enabled Disabled IP Address
IP Routing IP Mask
IP static routing configuration
Host Network IP Address
IP Address
Default Gateway IP Address
Point to Point Interface Index RF V11 G703
Host Network IP Address
IP Address
Default Gateway IP Address
Point to Point Interface Index RF V11 G703
Host Network IP Address
IP Address
Default Gateway IP Address
Point to Point Interface Index RF V11 G703
Network Time Protocol
Enabled Disabled Main Server
Spare Server
6. NETWORK ELEMENT INTEGRATION TEST
SITE A
SITE B
Loopback Tests
Location Point Channel 1 Channel 0 (1+1 only)
Near End Tributary OK NOK OK NOK
Near End IDU Cable OK NOK OK NOK
Near End ODU Cable OK NOK OK NOK
Far End Tributary OK NOK OK NOK
SITE A
NAME:
LOCATION:
SITE B
NAME:
LOCATION:
Not Accepted
PENDING POINT(s)
Comments
Date: Date: