You are on page 1of 2

CITC 1302

Certification Reports

Answer the following questions based on the report on page 2 of this document:

1. What is the cable ID? CHAMISA D1011


2. What type of cable is being tested for this certification report? Cat 6 UTP
3. What is the result of the test summary? The test summary is: FAIL
4. What is the length of pair 7-8? 46ft
5. What is the length of pair 4-5? 72ft
6. Why did the cable fail the test? The cable failed the NEXT test and it was because the cable’s
frequency dropped below the PASS/FAIL Line which means the wires are picking up crosstalk
which is not good, this is happening due to the wires not being twisted tightly enough.

Supplemental resource:

https://www.flukenetworks.com/knowledge-base/dtx-cableanalyzer/next-near-end-crosstalk-
troubleshooting

Page 1 of 2
CITC 1302
Certification Reports

Page 2 of 2

You might also like