Professional Documents
Culture Documents
Xav62bt Xav622 en Es PDF
Xav62bt Xav622 en Es PDF
AV Center
AV Center
Operating Instructions GB
Manual de instrucciones ES
XAV-62BT
XAV-622
Warning
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
CAUTION
The use of optical instruments with this product
will increase eye hazard. As the laser beam used
in this CD/DVD player is harmful to eyes, do not
attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.
2
Table of Contents
Playable discs and symbols used in these Using PBC (playback control) functions . . . . 20
Operating Instructions . . . . . . . . . . . . . . . . . . . . 9 Configuring audio settings . . . . . . . . . . . . . . . 20
Location and function of Changing the audio language/format . . . . . 20
controls/terminals . . . . . . . . . . . . . . . . . . . . . . 10 Changing the audio channel . . . . . . . . . . . . 21
Main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Adjusting the audio output level
RM-X170 Remote Commander . . . . . . . . . 12 — Dolby D level . . . . . . . . . . . . . . . . . . . . 21
Locking discs — Parental control. . . . . . . . . . 21
Getting Started Activating parental control. . . . . . . . . . . . . 21
Changing the area and its movie rating
Resetting the unit . . . . . . . . . . . . . . . . . . . . . . . 14 level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
iPod Operations
Playing an iPod . . . . . . . . . . . . . . . . . . . . . . . . 29
Setting the play mode . . . . . . . . . . . . . . . . . . . 29
Repeat and shuffle play. . . . . . . . . . . . . . . . . . 30
Operating an iPod directly
— Passenger control . . . . . . . . . . . . . . . . . . . . 30
3
Useful Functions Sound Adjustment
4
Additional Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Notes on LCD panel . . . . . . . . . . . . . . . . . . 58
Notes on discs . . . . . . . . . . . . . . . . . . . . . . . 59
Playback order of MP3/WMA/AAC/JPEG/
Xvid/MPEG-4 files . . . . . . . . . . . . . . . . . . . 59
About MP3 files . . . . . . . . . . . . . . . . . . . . . 60
About WMA files . . . . . . . . . . . . . . . . . . . . 60
About AAC files . . . . . . . . . . . . . . . . . . . . . 60
About JPEG files . . . . . . . . . . . . . . . . . . . . 60
About MPEG-4 files . . . . . . . . . . . . . . . . . . 60
About iPod . . . . . . . . . . . . . . . . . . . . . . . . . 60
About Bluetooth function . . . . . . . . . . . . . . 61
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Removing the unit . . . . . . . . . . . . . . . . . . . . . . 62
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 62
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . 64
Error displays/messages . . . . . . . . . . . . . . . 67
Language code/area code list. . . . . . . . . . . . . . 69
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Support site
If you have any questions or for the latest support information on this
product, please visit the web site below:
6
Copyrights
Manufactured under license
from Dolby Laboratories. Music recognition technology and related data
“Dolby” and the double-D are provided by Gracenote®. Gracenote is the
symbol are trademarks of Dolby Laboratories. industry standard in music recognition
technology and related content delivery. For
Microsoft, Windows, Windows Vista and Windows more information, please visit
Media and logos are trademarks or registered www.gracenote.com.
trademarks of Microsoft Corporation in the United CD, DVD, Blu-ray Disc, and music and video-
States and/or other countries.
related data from Gracenote, Inc., copyright ©
2000 to present Gracenote. Gracenote Software,
This product is protected by certain intellectual copyright © 2000 to present Gracenote. One or
property rights of Microsoft Corporation. Use or more patents owned by Gracenote apply to this
distribution of such technology outside of this product and service. See the Gracenote website
product is prohibited without a license from for a non-exhaustive list of applicable Gracenote
Microsoft or an authorized Microsoft subsidiary. patents.
“DVD VIDEO,” “DVD-R,” “DVD-RW,” “DVD+R,” Gracenote, CDDB, MusicID, MediaVOCS, the
and “DVD+RW” are trademarks. Gracenote logo and logotype, and the “Powered
by Gracenote” logo are either registered
The Bluetooth word mark and logos are owned by trademarks or trademarks of Gracenote in the
the Bluetooth SIG, Inc. and any use of such marks United States and/or other countries.
by Sony Corporation is under license. Other
trademarks and trade names are those of their This product uses font data which is licensed to
respective owners. Sony by Monotype Imaging Inc. or its affiliates.
ZAPPIN is a trademark of Sony Corporation. iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc., registered
12 TONE ANALYSIS and its in the U.S. and other countries.
logo are trademarks of Sony
Corporation. Apple, Macintosh and iTunes are trademarks of
Apple Inc., registered in the U.S. and other
“WALKMAN” and countries.
“WALKMAN” logo are
registered trademarks of THIS PRODUCT IS LICENSED UNDER THE
Sony Corporation. MPEG-4 VISUAL PATENT PORTFOLIO
LICENSE FOR THE PERSONAL AND NON-
COMMERCIAL USE OF A CONSUMER FOR
SensMe and the SensMe logo are DECODING MPEG-4 VIDEO THAT WAS
trademarks or registered ENCODED BY A CONSUMER ENGAGED IN A
trademarks of Sony Ericsson PERSONAL AND NON-COMMERCIAL
Mobile Communications AB. ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED BY MPEG LA
TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS
GRANTED OR SHALL BE IMPLIED FOR ANY
OTHER USE. ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO
PROMOTIONAL, INTERNAL AND
COMMERCIAL USES AND LICENSING MAY
BE OBTAINED FROM MPEG LA, LLC. SEE
HTTP://WWW.MPEGLA.COM
All other trademarks are trademarks of their
respective owners.
7
Emergency calls
Notes on Bluetooth (XAV-62BT This Bluetooth car handsfree and the electronic
device connected to the handsfree operate using
only) radio signals, cellular, and landline networks as well
as user-programmed function, which cannot
Caution guarantee connection under all conditions.
IN NO EVENT SHALL SONY BE LIABLE FOR Therefore do not rely solely upon any electronic
ANY INCIDENTAL, INDIRECT OR device for essential communications (such as
CONSEQUENTIAL DAMAGES OR OTHER medical emergencies).
DAMAGES INCLUDING, WITHOUT Remember, in order to make or receive calls, the
LIMITATION, LOSS OF PROFITS, LOSS OF handsfree and the electronic device connected to the
REVENUE, LOSS OF DATA, LOSS OF USE OF handsfree must be switched on in a service area with
THE PRODUCT OR ANY ASSOCIATED adequate cellular signal strength.
EQUIPMENT, DOWNTIME, AND Emergency calls may not be possible on all cellular
PURCHASER’S TIME RELATED TO OR phone networks or when certain network services
ARISING OUT OF THE USE OF THIS and/or phone features are in use.
PRODUCT, ITS HARDWARE AND/OR ITS Check with your local service provider.
SOFTWARE.
IMPORTANT NOTICE!
Safe and efficient use
Changes or modifications to this unit not expressly
approved by Sony may void the user’s authority to
operate the equipment.
Please check for exceptions, due to national
requirement or limitations, in usage of Bluetooth
equipment before using this product.
Driving
Check the laws and regulations on the use of cellular
phones and handsfree equipment in the areas where
you drive.
Always give full attention to driving and pull off the
road and park before making or answering a call if
driving conditions so require.
8
Playable discs and symbols used in these Operating Instructions
This unit can play various video/audio discs.
The following chart helps you to check if a disc is supported by this unit, as well as what functions are
available for a given disc type.
DVD VIDEO
DVD-R*1/DVD-R DL*1/DVD-RW*1
VIDEO
Audio CD
CD-ROM*2/CD-R*2/CD-RW*2
*1 Audio files can also be stored.
*2 Video/image files can also be stored.
Note
“DVD” may be used in these Operating Instructions as a general term for DVD VIDEOs, DVD-Rs/DVD-RWs, and
DVD+Rs/DVD+RWs.
The following chart shows the supported file types and their symbols.
Available functions differ depending on the format, regardless of disc type. The format symbols below
appear in these Operating Instructions next to the description of functions available for their
corresponding file types.
9
Location and function of controls/terminals
Main unit
10
Screen displays A “Source List” key
When no source is selected:
Touch to open the source list.
1 2 B “Top” key
XAV-62BT
Touch to open the top menu.
Source List Top XAV-622
Touch to open the source list.
D (Close) key
Touch to close the menu.
10:00 AM
E “ATT” (Attenuate) key*1
Touch to attenuate the sound. To cancel,
touch again.
3
F (Setting) key
Top menu (XAV-62BT only):
Touch to open the setting menu.
4 5 6 7
G “M.OFF” (Monitor off) key
Touch to turn off the monitor and the button
ATT M.OFF illumination. To turn back on, touch
anywhere on the display.
3
0*
11
RM-X170 Remote Commander
8
1
9
2 q;
3 qa
4
qs
5 qd
qf
6
qg
7 qh
L ZAP button
Press to enter ZAPPIN™ mode.
O MODE button
Press to select the radio band (FM/AM)/
select an auxiliary device (Front AUX/Rear
AUX)*6.
13
Getting Started Switching the FM tuning
Resetting the unit interval
Before operating the unit for the first time, or You can switch the FM tuning interval to receive
after replacing the car battery or changing the more precise radio signals.
connections, you must reset the unit. 1 Touch “Source List,” then .
Press the reset button (page 10) with a pointed
object, such as a ballpoint pen. 2 Touch “General.”
The general setting menu appears.
Note
Pressing the reset button will erase the clock setting 3 Touch v/V to scroll, then touch “FM
and some stored contents. Tuning Interval.”
The setting display appears.
Initial Setting
Preparing the remote
commander
Rear/Sub Out Rear / Sub
Listening Position Front L / Front R Before using the remote commander for the first
Language English time, remove the insulation film.
OK
P4 P5 P6 Memory
4 56 7 8 9
Receive Preset PTY
Band
Menu List List
1 “Source List”
Touch to open the source list. (page 11)
2 Touch “Band.” 2 “ATT”
The band list appears. Touch to attenuate the sound. To cancel,
Source List ATT Top
touch again.
3 “Top”
XAV-62BT
Touch to open the top menu. (page 11)
FM1 FM2 FM3 AM1 AM2 XAV-622
Touch to open the source list. (page 11)
Receive Preset PTY
Band
Menu List List 4 m/M
Touch to tune manually.
Touch and hold to continuously skip
3 Touch the desired band (“FM1,” “FM2,” frequencies.
“FM3,” “AM1,” or “AM2”). 5 ./>
Touch “Band” again to close the band list. Touch to tune automatically.
4 Perform tuning.
6 “Band”
To tune automatically Touch to open the band list and change
Touch ./>. the band.
Scanning stops when the unit receives a
station. Repeat this procedure until the 7 “Receive Menu”
desired station is received. Touch to open the receive menu, which
contains the following items.
To tune manually
Touch m/M repeatedly until the desired • “Mono”: Touch to activate monaural
frequency is received. mode if FM reception is poor. To restore
To skip frequencies continuously, touch and stereo reception, select “OFF.”
hold m/M. • “Local”: Touch to tune only to stations
with strong signals. To tune normally,
select “OFF.”
8 “Preset List”
Touch to list up stored stations, or store
stations. (page 16)
9 “PTY List”
Touch to open the PTY list. (page 17)
15
Reception indications Receiving stored stations
A B 1 Select the band, then touch “Preset
List.”
Source List ATT Top
2 Touch the desired number (“P1” to
“P6”).
RDS
Receive Preset PTY
Band
Menu List List Overview
15
FM stations with Radio Data System (RDS)
C D service send inaudible digital information along
with the regular radio program signal.
A Current source icon*1
B Band name, preset number*2, frequency/
status
Display items
C Volume level*3
A
D Setting status (EQ7, RBE)
*1 Appears only when the controls are displayed. Source List ATT Top
16
Selecting PTY Discs
1 During FM reception, touch “PTY List.”
Playing discs
The PTY list appears if the station is
transmitting PTY data.
Depending on the disc, some operations may be
To scroll the list, touch v/V.
different or restricted.
2 Touch the desired program type. Refer to the operating instructions supplied with
The unit searches for a station broadcasting your disc.
the selected program type.
1 Insert the disc (label side up).
To close the PTY list, touch “PTY List.” Playback starts automatically.
17
Playback controls
Touch the display if the playback controls are not 9 q;
displayed.
Source List ATT Top
Common to all discs/formats
1 2 3
Play Menu
ZAP List
SHUF
Album
qa
DVD Play Menu
Control SHUF
1 “Source List”
Touch to open the source list. (page 11)
4 5 6
2 “ATT”
Touch to attenuate the sound. To cancel,
touch again.
Source List ATT Top
3 “Top”
XAV-62BT
Touch to open the top menu. (page 11)
XAV-622
Touch to open the source list. (page 11)
4 ./>
DVD Play Menu
Control SHUF Touch to skip a chapter/track/scene/
image/file.
15
9 “Album” –/+
Touch to skip an MP3/WMA/AAC/JPEG/ B C
Xvid/MPEG-4 album (folder).
0 “List”
Touch to list up tracks/images/video files. D E F
(page 31)
Source List ATT Top
qa “ZAP”
Touch to enter ZAPPIN mode. (page 31)
*1 The speed depends on the format or the recording
method.
*2 Availability depends on the disc.
*3 When the 4-digit input prompt appears, input the
Play Menu
language code (page 69) for the desired language. ZAP List
SHUF
Album
Note
If the disc contains multiple file types, only the
selected file type (audio/video/image) can be played. G
For details on how to select the file type, see
“Selecting a file type” on page 31. A Current source icon
B Volume level*1
Notes on JPEG playback C Format, playback status, elapsed playback
• If a large-sized image is rotated, it may take longer
to display.
time*2, chapter/title/album (folder)/track
• Progressive JPEG files cannot be displayed. number*3*4, audio format*5, setting status
(CSO, EQ7, RBE)
D Playback status, elapsed playback time*2
E Track name, album name, artist name
F Album artwork display*6
G Format, track number, album number*7,
setting status (CSO, EQ7, RBE)
*1 When ATT is activated, appears.
*2 During JPEG playback or VCD playback with PBC
functions, no indication appears.
*3 Indications differ depending on the disc/format.
*4 When playing a VCD with PBC functions
(page 20), no indication appears.
*5 DVD only.
*6 The recommended size is from 240 × 240 to 960 ×
960 pixels.
*7 MP3/WMA/AAC only.
19
Using PBC (playback control) Configuring audio settings
functions Note
Discs in DTS format are not supported. The sound is
not output if the DTS format is selected.
Dolby D 3 / 2 . 1
Front channel × 2 + LFE channel × 1
Center channel × 1
20
Changing the audio channel Locking discs
— Parental control
MPEG-4
*
When playing a VCD/CD/MP3/WMA/AAC/
Xvid/MPEG-4, you can listen to both the right * Excluding DVD-R/DVD-R DL/DVD-RW in VR mode.
and left channel, only the right channel, or only You can lock a disc, or set playback restrictions
the left channel via both the right and left according to a predetermined level such as
speakers. viewer age. Restricted scenes can be blocked or
The options are indicated below. replaced with different scenes when a parental
“2-Ch”: Standard stereo sound (default) control-compatible DVD is played.
“L-Ch”: Left channel sound (monaural)
“R-Ch”: Right channel sound (monaural) Activating parental control
For VCD/CD/MP3/WMA/AAC
1 While no source is selected, touch
1 During playback, touch “Play Menu,” “Source List,” then .
then “Stereo” repeatedly until the 2 Touch “Visual.”
desired audio channel appears. The visual setting menu appears.
For Xvid/MPEG-4 3 Touch v/V to scroll, then touch “DVD
1 During playback, touch “Play Menu,” Parental Control.”
then “Audio” repeatedly until the The password setting display appears.
desired audio channel appears. 4 Touch the number keys to enter your
To close the play menu, touch “Play Menu.” password, then touch “OK.”
Note 5 To confirm, touch the number keys to
You may not be able to change the audio setting reenter your password, then touch
depending on the disc. “OK.”
Tip
The setting is complete.
Operation via the remote commander by pressing To delete an entered number, touch “Clear.”
(AUDIO) repeatedly is also available. To return to the previous display, touch “Back.”
21
Changing the area and its movie Repeat and shuffle play
rating level
The restriction levels can be set based on the area
MPEG-4
and its movie ratings.
1 While no source is selected, touch 1 During playback, touch “Play Menu,”
“Source List,” then . then the “Repeat” or “Shuffle” box
repeatedly until the desired option
2 Touch “Visual.” appears.
The visual setting menu appears.
3 Touch v/V to scroll, then touch “DVD Source List ATT Top
Parental Area.”
When parental control is already activated,
the display to enter your password appears.
To change the setting, enter your password. Chapter OFF ON
The options appear. Repeat Shuffle Adjust Dolby D Level 0
22
The shuffle options and switching order of each
disc/format are indicated below. Direct search play
Disc/format Options
“OFF”: Returns to normal play MPEG-4
mode.
*2 You can directly locate a desired point by
“Title”: Plays chapters in the
current title in random order. specifying the title number, chapter number, etc.
23
Notes on use
USB Device Operations • Do not use USB devices so large or heavy that they
may fall down due to vibration, or cause a loose
For details on the compatibility of your USB connection.
device, visit the support site. • Do not leave a USB device in a parked car, as
malfunction may result.
• This unit cannot recognize USB devices via a USB
Support site hub.
• Be sure to use the USB cable supplied with the
Customers in Latin America: device if a cable is needed when making a USB
http://esupport.sony.com/ES/LA/ connection.
Customers in Pan Asia: Notes on playback
http://www.sony-asia.com/section/support • If a USB device contains multiple file types, only the
http://www.sony-asia.com/caraudio/ selected file type (audio/video/image) can be played.
For details on how to select the file type, see
“Selecting a file type” on page 31.
• MSC (Mass Storage Class) and MTP (Media • Displayed indications will differ, depending on the
Transfer Protocol) type USB devices compliant USB device, recorded format and settings. For
with the USB standard can be used. details, visit the support site.
• Compatible codecs are MP3 (.mp3), WMA • The maximum number of displayable data is as
(.wma), AAC (.m4a), JPEG (.jpg), Xvid (.avi), follows:
– folders (albums): 256
and MPEG-4 (.mp4). – files (tracks): 2,000
• Backup of data in a USB device is • It may take time for playback to begin, depending on
recommended. the amount of recorded data.
Notes • DRM (Digital Rights Management) files may not be
• Connect the USB device after starting the engine. played.
Depending on the USB device, malfunction or • During playback or reverse/fast-forward of a VBR
damage may occur if it is connected before starting (Variable Bit Rate) MP3/WMA/AAC file, elapsed
the engine. playing time may not display accurately.
• A large-sized file may take time to start playing. • Playback of a lossless compression file is not
supported.
SensMe™
Installing “SensMe™ Setup” and
Setup “Content Transfer” on your
computer
Use of the supplied software (“SensMe™ Setup”
and “Content Transfer”) is required to enable the
SensMe™ function on this unit.
Tip
Registration can be performed either along with the
Install the software to your computer from the
installation procedure or after installation. supplied CD-ROM.
1 Insert the supplied CD-ROM into your
computer.
The Installation Wizard runs automatically.
2 Follow the on-screen instructions to
complete the installation.
25
Registering a USB device using Playing tracks in channels
“SensMe™ Setup” — SensMe™ channels
USB device registration is required to enable the “SensMe™ channels” automatically group tracks
SensMe™ function on the unit. into channels by their tunes. You can select and
play a channel that fits your mood, activity, etc.
If registration is not performed along with the
installation procedure, follow the steps below. 1 Connect a USB device set up for the
SensMe™ function.
1 Start “SensMe™ Setup” on your
computer. 2 Touch “Source List,” then “SensMe™.”
2 Connect a USB device to your 3 Touch “channels.”
computer. The channel list appears.
3 Complete registration following the
on-screen instructions.
Tip Shuffle All
If you connect a registered USB device containing
analyzed tracks, the USB device can be unregistered
again. Energetic
26
Channel list “SensMe™ channels” playback
x Recommended, Shuffle All
controls and indications
displayed accurately.
Relax
“Shuffle All”: Plays all analyzed tracks in ZAP
random order.
F G H
x Basic channels
Plays tracks according to the music type. A To display the control keys: “Source List,”
“ATT,” “Top.” (page 18)
“Energetic”: High-spirit tracks. B To scroll the list and select another channel.
C Indicates the current channel.
“Relax”: Calm tracks. D Indicates the album artwork display*1.
“Mellow”: Mellow, melancholy tracks. E Indicates the elapsed playback time, track
name and artist name.
“Upbeat”: Happy tracks to improve your F To pause/resume play after pause.
mood. G To skip a track.
H To enter ZAPPIN mode. (page 31)
“Emotional”: Ballad tracks. During ZAPPIN playback of “SensMe™
“Lounge”: Lounge tracks. channels,” the most melodic or rhythmical
sections*2 of the tracks are played.
“Dance”: Rhythm and rap, rhythm and blues
tracks. *1 The recommended size is from 240 × 240 to 960 ×
960 pixels.
“Extreme”: Intense rock tracks. *2 May not be detected correctly.
x In-car channels
Plays tracks that are suitable while driving.
27
“SensMe™ mood” playback controls
Playing tracks in mood maps and indications
— SensMe™ mood
A B C D E
“SensMe™ mood” distributes tracks as dots on a
two-axis mood map, based on the characteristics
of the individual tracks.
Fast
Mood
By touching the point on the map according to
your mood, a circle appears around the touched Type
point, and the tracks inside the circle are played. Sad Happy
Style
1 Connect a USB device set up for the
SensMe™ function. Time ZAP
Slow
28
*2 May not appear in the case of an iPod touch or
iPod Operations iPhone being connected, or when the iPod was
last played using passenger control.
For details on the compatibility of your iPod, see 3 Adjust the volume on this unit.
“About iPod” on page 60 or visit the support site.
About playback controls and
Support site indications
Customers in Latin America: You can control iPod playback in the same way
http://esupport.sony.com/ES/LA/ as disc playback. For details, see “Playback
Customers in Pan Asia: controls” on page 18.
For details on playback indications, see
http://www.sony-asia.com/section/support
“Playback indications” on page 19.
http://www.sony-asia.com/caraudio/
To stop playback
In these Operating Instructions, “iPod” is used as Press and hold (SOURCE/OFF) for 1 second.
a general reference for the iPod functions on the
iPod and iPhone, unless otherwise specified by
the text or illustrations. To disconnect the iPod
Stop playback, then disconnect.
Do not disconnect during playback, as data in the
Playing an iPod iPod may be damaged.
*1 To play videos from an iPod with video, use of continue to next page t
the RC-202IPV is required. 29
1 During playback, touch “List.”
2 Touch “MUSIC” or “VIDEO.” Operating an iPod directly
3 Touch the desired play mode. — Passenger control
To start playback, touch the desired item(s) in
the list. You can directly operate an iPod connected to
To scroll the list, touch v/V. this unit.
1 During playback, touch “Play Menu,”
To skip items of the selected play then the “Passenger Control” box to
mode set to “ON.”
During playback, touch –/+ of the selected play
mode. Deactivating the passenger control
Touch the “Passenger Control” box to set to
“OFF.”
Repeat and shuffle play The play mode changes to resuming mode.
1 During playback, touch “Play Menu,” To close the play menu, touch “Play Menu.”
then the “Repeat” or “Shuffle” box Notes
repeatedly until the desired option • To output video to this unit, you need to activate the
appears. video output of the iPod.
Repeat or shuffle play starts. • The volume can be adjusted only by this unit.
• The repeat setting will be off if the passenger control
To close the play menu, touch “Play Menu.” mode is canceled.
The repeat options are as follows:
For audio playback
“OFF”: Returns to normal play mode.
“TRACK”: Repeats the current track.
“ALBUM”/“MUSIC PODCAST”/“ARTIST”/
“PLAYLIST”/“GENRE”*: Repeats the current
item of the selected play mode.
30
3 Touch the desired file.
Useful Functions Playback of the selected file starts.
Listing up tracks/images/video
files — List Searching for a track by
listening to track passages
Selecting a track/image/video file — ZAPPIN™
MPEG-4
While playing short track passages from a disc or
You can list up albums/folders/tracks/images/ USB device in sequence, you can search for a
video files, and select a desired one to play. track you want to listen to.
This function is convenient especially for the This function is convenient, for example, when
disc in MP3/WMA/AAC/JPEG/Xvid/MPEG-4 searching for a track in shuffle or shuffle repeat
format or USB device containing many albums/ mode.
tracks, etc.
1 During audio playback, touch “ZAP.”
1 During playback, touch “List.” Playback starts from a passage of the next
The list of categories or files from the track.
currently played item appears. The passage is played for the set time, and a
beep sounds before the next passage starts.
Contents List
File 01
File 02
File 03 1/5
“ZAP” The playback section of each
File 04 touched. track in ZAPPIN mode.
File 05
File 06
2 Touch “ZAP” when a track you want to
listen to is played.
The track that you select returns to normal
play mode from the beginning.
Page position bar To search for a track via ZAPPIN mode
again, repeat steps 1 and 2.
To move to the upper level, touch .
To scroll the list, touch v/V.
To jump pages, touch the page position bar. In the case of “SensMe™ channels”
or “SensMe™ mood” playback
2 Touch the desired item. If you enter ZAPPIN mode during “SensMe™
Playback starts. channels” or “SensMe™ mood” playback, the
most melodic or rhythmical sections* of tracks
Selecting a file type are played. For details on the SensMe™
function, see “Enjoying music according to your
mood — SensMe™” on page 25.
MPEG-4 * May not be detected correctly.
If the disc/USB device contains multiple file Tips
types, only the selected file type (audio/video/ • You can change the playback time (page 55), but
image) can be played. The playback priority cannot select the track passage to play.
order of file type is initially set to audio, video, • You can deactivate the beep sound between track
passages (page 55).
then image (e.g., if the disc contains video files
and image files, only video files are played). You
can select the file type to list up, then select the
desired file to play.
1 During playback, touch “List.”
2 Touch , then “Audio,” “Image,” or
“Video” to select the file type.
31
Using Gesture Command Handsfree Calling and Audio Streaming
You can perform frequently-used operations by — Bluetooth (XAV-62BT only)
drawing the following command stroke on the
reception/playback display. Before using the Bluetooth
Do this To
function
Radio reception: Bluetooth functions and descriptions apply only
seek forward stations. to XAV-62BT.
Draw a (The same as >.)
horizontal line DVD/VCD playback: Basic procedure of the Bluetooth
(left to right) skip forward a chapter/track.
(The same as >.)
function
1 Pairing
JPEG/Xvid/MPEG-4/audio When connecting Bluetooth devices for the
playback: first time, mutual registration is required. This
skip forward a file/track. is called “pairing.” This registration (pairing)
(The same as >.) is required only for the first time, as this unit
Radio reception: and the other devices will recognize each
seek backward stations. other automatically from the next time.
Draw a (The same as ..)
horizontal line DVD/VCD playback:
(right to left) skip backward a chapter/track.
(The same as ..)
JPEG/Xvid/MPEG-4/audio Note
playback: If you delete the device registration from this unit,
skip backward a file/track. you need to perform pairing again.
(The same as ..)
2 Connecting
Radio reception: After pairing is made, connect this unit and
receive stored stations (go the Bluetooth device. Depending on the
forward). device, connection is automatically made
Draw a vertical DVD/VCD/Xvid/MPEG-4 along with the pairing.
line playback:
(upwards) fast-forward the video.
JPEG/audio playback:
skip forward an album (folder).
(The same as “Album” +.)
Radio reception: 3 Handsfree calling/audio streaming
receive stored stations (go You can make/receive a handsfree call, or
backward). listen to audio through this unit.
Draw a vertical DVD/VCD/Xvid/MPEG-4
line playback:
(downwards) reverse the video.
JPEG/audio playback:
skip backward an album
(folder).
(The same as “Album” –.)
BT Menu
Signal OFF / ON
Search
Device List
33
3 Touch “Search.” 5 Start searching for this unit from the
A search for connectable Bluetooth devices other Bluetooth device.
starts.*1*2 After the search is complete, this unit appears
After the search is complete, the list of as “Sony Automotive”* in the list of the other
detected devices*3 appears. Bluetooth device.
*1 If the Bluetooth signal of this unit is off, it * Can be changed in the Bluetooth setting
activates automatically when searching starts. (page 42).
*2 Search time varies depending on the number of
connectable devices.
*3 The name or address (if name is unavailable) of
detected devices is displayed. DR-BT30Q
Sony
4 Touch the device to connect. Automotive
XXXXXXX
5 Select the connection type.
Touch “Handsfree Connect” to use for
handsfree calling.
Touch “Audio Connect” to use for audio After you perform the required operation on
streaming. the other Bluetooth device, the passkey input
Pairing starts and the passkey input display display appears on this unit.
appear. 6 Touch the number keys to enter the
6 Touch the number keys to enter the passkey, then “OK.”
passkey, then touch “OK.” Pairing is complete and this unit is connected
Also perform the required operation on the to the other Bluetooth device.
other Bluetooth device. When connection is made successfully, or
Pairing is complete and this unit is connected appears at the bottom of the display.
to the other Bluetooth device. Notes
When connection is made successfully, or • While connecting to a Bluetooth device, this unit
appears at the bottom of the display. cannot be detected from another device. To enable
detection, disconnect the current connection.
• Depending on the device, searching from this unit
Searching from the Bluetooth may not be possible. In this case, search for this unit
from the other device.
device • If you search from this unit and another device at the
same time, this unit will not recognize the other
The procedure to search for this unit from the device.
other Bluetooth device is explained below. • It may take time to search or connect.
• Depending on the device, the connection
1 Select the Bluetooth source. confirmation display may appear before inputting the
To select Bluetooth Phone, press (TOP), then passkey.
touch “BT Phone” in the top menu. • The time limit for inputting the passkey differs
To select Bluetooth Audio, touch “Source depending on the device.
List,” then “BT Audio.” • This unit cannot be connected to a device that
supports only HSP (Head Set Profile).
2 Touch “BT Menu.”
In the case of Bluetooth Audio, touch “Play
Menu,” then “BT Menu.”
The Bluetooth setting menu appears.
3 Touch “Signal,” then “Yes” to set
“Signal” to “ON.”
The Bluetooth signal of this unit is activated.
4 Touch “Discoverable” to set to
“Show.”
This unit is ready to be detected by the other
Bluetooth device.
34
To delete an individual registration
Connecting 1 Follow steps 1 to 3 above.
When the ignition is turned to on with the 2 Touch the device to delete, then touch “Delete
Bluetooth signal activated, this unit searches for this device from List.”
the last-connected Bluetooth device, and 3 Touch “Yes” to confirm.
connection is made automatically if possible.
This chapter explains how to connect manually To connect to the last-connected
to registered Bluetooth devices. device from this unit (Bluetooth
Before starting, be sure to activate the Bluetooth Audio only)
signal both on this unit (page 42) and the other Touch “Source List,” “BT Audio,” then
Bluetooth device. “Connect.”
Note
1 Select the Bluetooth source. If connection is made during audio streaming, noise
To select Bluetooth Phone, press (TOP), then may occur over playback sound.
touch “BT Phone” in the top menu.
Tip
To select Bluetooth Audio, touch “Source
You can connect a cellular phone for audio streaming
List,” then “BT Audio.” if it supports A2DP (Advanced Audio Distribution
2 Touch “BT Menu.” Profile).
In the case of Bluetooth Audio, touch “Play
Menu,” then “BT Menu.”
The Bluetooth setting menu appears. Handsfree calling
3 Touch “Device List.” Once the unit is connected to the cellular phone,
The list of registered Bluetooth devices you can make/receive handsfree calls by
appears. operating this unit.
To scroll the list, touch v/V.
4 Touch the device to connect.
Making calls
5 Select the connection type.
Touch “Handsfree Connect” to use for
handsfree calling. By dialing a phone number
Touch “Audio Connect” to use for audio 1 Press (TOP), then touch “BT Phone”
streaming. in the top menu.
Connection is complete. The Bluetooth Phone display appears.
When connection is made successfully, or
appears at the bottom of the display.
Back ATT BT Menu Top
In the device list, the currently connected
Preset Dial
device is indicated by the icon at the head of
its name.
P1 P2 P3 Voice Dial
device
Operate the other Bluetooth device to connect to BT phone Call Menu PB Access
this unit.
When connection is made successfully, or
appears at the bottom of the display.
continue to next page t
To disconnect
1 Follow steps 1 to 3 above.
2 Touch the currently connected device, then
“Handsfree Disconnect” or “Audio
Disconnect.”
Dial
Back ATT Top
1 Press (TOP), then touch “BT Phone”
in the top menu.
Please input phone number.
The Bluetooth Phone display appears.
2 Touch “Call Menu,” then “Recent Call.”
The call history list appears.
1 2 3 4 5 To scroll the list, touch v/V.
6 7 8 9 0 3 Touch the desired item in the list.
The contact confirmation display appears.
4 Touch “Call.”
3 Touch the number keys to enter the The call is made and the calling display
phone number, then touch . appears until the other party answers.
To delete an entered number, touch .
The call is made and the calling display
appears until the other party answers. By the preset dial
You can store up to 6 contacts in the preset dial.
For details on how to store, see “Preset dial” on
ATT
page 40.
Calling...
36
• Voice dial may not work depending on the
recognition specification of the cellular phone. For Operations during a call
details, visit the support site.
The following display appears during a call.
To adjust the talker’s voice volume
Turn the volume control dial while making a call. ATT BT Menu Top
On the Line.
The level of the talker’s voice volume will be
stored into memory, independently from the Name
regular volume level. 0123456789
To end a call
Touch .
37
3 Send the phonebook data by
Phonebook management operating the connected cellular
phone.
You can store up to 300 contacts in the When receiving is complete, “Complete”
phonebook and up to 5 phone numbers can be appears and the phonebook data is stored on
registered to each contact. this unit.
Notes
• Prior to disposal or changing ownership of your car To add a contact by entering the
with this unit still installed, be sure to press the reset
button to erase all the phonebook data in this unit to
name and number
prevent possible unauthorized access. 1 Press (TOP), then touch “BT Phone”
Disconnecting the power supply lead will also erase
all the phonebook data.
in the top menu.
• Downloaded phonebook data from a cellular phone The Bluetooth Phone display appears.
cannot be overwritten by subsequent data. However, 2 Touch “Call Menu,” then “Phonebook.”
some data (name, etc.), may be duplicated as a The phonebook appears.
result.
• Phonebook data may be lost if this unit is damaged. 3 Touch “Add Contact.”
• When disposing of this unit, delete the phonebook The contact registration display appears.
data by initializing (page 42).
Empty
38
2 Touch “Call Menu,” then “Recent Call.”
The call history list appears. Deleting phonebook data
To scroll the list, touch v/V.
3 Touch the item to add to the To delete all phonebook data on this
phonebook. unit
The contact confirmation display appears.
1 Press (TOP), then touch “BT Phone”
4 Touch “Save to Phonebook.” in the top menu.
The name input display appears. The Bluetooth Phone display appears.
5 Touch the character keys to enter the 2 Touch “Call Menu,” then “Phonebook.”
name, then touch “OK.” The phonebook appears.
For details on how to use the keyboard, see
“About the keyboard to edit the name” on
3 Touch “Delete All.”
The confirmation display appears.
page 40.
The contact is added to the phonebook. 4 Touch “Yes.”
All phonebook data is deleted.
Browsing a phonebook in a cellular To delete an individual contact from
phone the phonebook
If the connected cellular phone supports PBAP 1 Follow steps 1 to 2 above.
(Phone Book Access Profile), you can browse its
phonebook data on this unit. 2 Select the contact to delete.
You can also make a call to a contact or add the 1 In the initial list, touch the initial of the
contact to this unit’s phonebook. contact.
1 Press (TOP), then touch “BT Phone” 2 In the name list, touch the name of the
in the top menu. contact.
The Bluetooth Phone display appears.
3 Touch “Delete Contact.”
2 Touch “PB Access.” The confirmation display appears.
The phonebook access menu appears.
4 Touch “Yes.”
3 Touch “Access” to select the memory The contact is deleted from the phonebook.
where phonebook data is stored.
To browse the data in a cellular phone’s
internal memory, set to “Memory.” Editing a contact
To browse the data on the SIM card, set to
“SIM.” 1 Press (TOP), then touch “BT Phone”
in the top menu.
4 Touch “Phonebook Browsing.” The Bluetooth Phone display appears.
The phonebook of the connected cellular
phone appears. 2 Touch “Call Menu,” then “Phonebook.”
The phonebook appears.
5 Select the desired contact.
3 Select the contact to edit.
1 In the initial list, touch the initial of the
contact. 1 In the initial list, touch the initial of the
contact.
2 In the name list, touch the name of the
contact. 2 In the name list, touch the name of the
contact.
3 In the number list, touch the phone
number. continue to next page t
The contact confirmation display appears.
40
4 Touch “Preset Memory,” then the 3 Touch the number keys to enter your code.
desired preset number (“P1” to “P6”). “Complete” appears, and the call data is
The contact is stored to the selected preset unlocked.
number.
41
Bluetooth settings “MIC Gain” (page 37)
Adjust the microphone volume for the other
The Bluetooth settings can be configured in “BT party: –2 ~ +2.
Menu.” “Initialize”*1
1 Select the Bluetooth source. Initializes all Bluetooth-related settings. Touch
To select Bluetooth Phone, press (TOP), then “Yes” to confirm.
touch “BT Phone” in the top menu. *1 Cannot be configured during a handsfree call.
To select Bluetooth Audio, touch “Source *2 Depending on the cellular phone, this unit’s
List,” then “BT Audio.” ringtone may be output even if set to “Cellular.”
2 Touch “BT Menu.” Note
In the case of Bluetooth Audio, touch “Play For details on the setting of other Bluetooth devices,
refer to their respective manuals.
Menu,” then “BT Menu.”
The Bluetooth setting menu appears.
3 Touch the desired item in the list and
configure the setting.
The items in the Bluetooth setting menu are as
follows:
“Signal”*1
Activates the Bluetooth signal: “ON,” “OFF.”
“Discoverable”*1 (page 34)
Allows the other Bluetooth device to search for
this unit: “Show,” “Hide.”
“Device Name”*1
Changes the name of this unit displayed on the
connected device. (Default setting: “Sony
Automotive”)
For details on basic operation of the keyboard,
see “About the keyboard to edit the name” on
page 40.
“Search”*1 (page 33)
Searches for connectable Bluetooth devices.
“Device List”*1 (page 35)
Displays the list of registered devices; connects
to a registered device; deletes all registrations.
“Auto Answer”*1
Answers an incoming call automatically.
– “Short”: to answer automatically after 3
seconds.
– “Long”: to answer automatically after 10
seconds.
– “OFF”: to not answer automatically.
“Ringtone”*1*2
Uses the ringtone of this unit or the connected
cellular phone: “Default,” “Cellular.”
“EC/NC Mode” (Echo Canceller/Noise
Canceller Mode)
Reduces echo and noise during a call.
For normal use, set to “Mode 1.”
If the outgoing sound quality is unsatisfactory,
set to “Mode 2” or “OFF.”
42
Tip
Sound Adjustment Other equalizer types are also adjustable.
43
Optimizing sound for the Calibrating the listening position
listening position — Intelligent Time Alignment Tune
— Intelligent Time Alignment You can precisely calibrate your listening
position from each speaker so that the sound
The unit can change the localization of sound by delay reaches the listener more correctly.
delaying the sound output from each speaker to Before starting, measure the distance between
suit your position, and simulate a natural sound your listening position and each speaker.
field with the feeling of being in the center of it
wherever you sit in the car. 1 During reception/playback, touch
The options for “Listening Position” are “Source List,” then .
indicated below. 2 Touch “Sound,” then “Listening
Position.”
your car
4
“Custom”: Precisely
calibrated position (page 44) 100 100 100 100 100
Reset OK
44
Speaker configuration and Adjusting the speaker volume
volume setup You can adjust the volume level of each
connected speaker.
The adjustable speakers are “Front R” (Front
Creating a virtual center speaker Right), “Front L” (Front Left), “Surround L”
— CSO (Rear Left), “Surround R” (Rear Right) and
“Subwoofer*.”
To fully enjoy surround sound, it is preferable to
* Adjustable only when a subwoofer is connected and
have 5 speakers (front left/right, rear left/right,
“Rear/Sub Out” is set to “Sub” (page 52).
center) and 1 subwoofer. CSO (Center Speaker
Organizer) allows you to create a virtual center 1 While no source is selected, touch
speaker even though a real center speaker is not “Source List,” then .
connected.
2 Touch “Sound.”
1 During disc/USB playback, touch The sound setting menu appears.
“Source List,” then . 3 Touch v/V to scroll, then touch “4.1ch
2 Touch “Sound.” Speaker Level.”
The sound setting menu appears. The setting display appears.
3 Touch “CSO.”
The options appear. Back ATT Top
Note 0
“CSO” is effective only when “Multi Ch Output” is set to
“Multi” (page 54), as it is effective only for playback of Reset
multi-channel sources.
Note
Using rear speakers like The subwoofer appears and the subwoofer key is
subwoofers — Rear Bass available only when “Rear/Sub Out” is set to “Sub”
Enhancer (page 52).
4 Touch the speaker, then +/– to adjust
Rear Bass Enhancer enhances the bass sound by the level.
applying the low pass filter setting (page 52) to Repeat this step to adjust each speaker’s
the rear speakers. This function allows the rear volume.
speakers to work like a pair of subwoofers if one To restore the default setting, touch “Reset.”
is not connected.
To return to the previous display, touch “Back.”
1 During reception/playback, touch
“Source List,” then .
2 Touch “Sound.”
The sound setting menu appears.
3 Touch v/V to scroll, then touch “RBE.”
The options appear.
4 Touch “RBE1,” “RBE2,” or “RBE3.”
The setting is complete.
To return to the previous display, touch “Back.”
45
Monitor Adjustment Adjusting the picture
Touch panel calibration — Picture EQ
Touch panel calibration is required if the You can adjust the picture to suit the interior
touching position does not correspond with the brightness of the car.
proper item. The options are indicated below.
“Dynamic”: Vivid picture with bright, clear
1 Touch “Source List,” then .
colors.
2 Touch “General.” “Standard”: Standard picture.
The general setting menu appears. “Theater”: Brightens the monitor; suitable for
3 Touch v/V to scroll, then touch “Touch darkly-lit movies.
Panel Adjust.” “Sepia”: Applies a sepia tone to the picture.
The setting display appears. “Custom 1,” “Custom 2”: User-adjustable
settings (page 47).
4 Touch the targets in sequence.
The calibration is complete. 1 During video/image playback, touch
“Source List,” then .
To cancel calibration, touch “Cancel.”
2 Touch “Screen.”
The screen setting menu appears.
Setting the background screen 3 Touch “Picture EQ.”
The options appear.
You can select the screen theme, visualizer and
picture brightness for the background screen 4 Touch the desired option.
according to your preference. To return to the previous display, touch “Back.”
1 Touch “Source List,” then . Note
This setting is available only when the parking brake is
2 Touch “Screen.” set.
The screen setting menu appears.
3 Touch “Screen Select.”
The options appear.
4 Select the screen theme.
Touch “Screen Theme,” then the desired type.
5 Select the visualizer.
Touch “Visualizer,” then the desired type.
6 Select the picture brightness.
Touch “Day / Night mode,” then one of the
following options.
“Auto”: Switches the brightness
automatically when you turn the lights on.
(Available only when the illumination control
lead is connected.)
“Always Day”: Fixes the brightness suitable
for daytime use.
“Always Night”: Fixes the brightness
suitable for nighttime use.
To return to the previous display, touch “Back.”
46
Customizing the picture Selecting the aspect ratio
The options “Custom 1” and “Custom 2” of You can change the screen aspect ratio.
Picture EQ allow you to make your own picture The options are indicated below.
setting by adjusting the picture tones.
1 During video/image playback, touch “Normal”: Picture with 4:3
“Source List,” then . aspect ratio (regular picture).
2 Touch “Screen,” then “Picture EQ.”
3 Touch “Custom 1” or “Custom 2,” then “Wide”: Picture with 4:3
“Custom Tune.” aspect ratio enlarged to the left
The setting display appears. and right edges of the screen,
with overflowing parts of the
Back ATT Top
top and bottom cut off to fill the
Picture EQ : Custom Tune screen.
Warm “Full”: Picture with 16:9
Normal
aspect ratio.
Cool
47
Settings Basic setting operation
The setting menu includes the following You can set items in the menu via the following
categories. procedure.
• “General”: General settings (page 49) For example, when setting the demonstration:
• “Sound”: Sound settings (page 51)
• “Screen”: Screen settings (page 53) 1 While no source is selected, touch
• “Visual”: DVD and other playback settings “Source List,” then .
(page 54) (For XAV-62BT only: From the top menu,
touch .)
The setting menu appears.
Clock Adjust
CT OFF / ON
2 Touch “Screen.”
The screen setting display appears.
Screen Select
Picture EQ Dynamic
Clock OFF / ON
Demo OFF / ON
48
General settings
Touch c “General” c the desired item c the desired option. For details on this procedure, see
“Basic setting operation” on page 48.
For details, see the pages listed below. “z” indicates the default setting.
49
Item Option Purpose Unit status
50
Sound settings
Touch c “Sound” c the desired item c the desired option. For details on this procedure, see “Basic
setting operation” on page 48.
For details, see the pages listed below. “z” indicates the default setting.
51
Item Option Purpose Unit status
52
Screen settings
Touch c “Screen” c the desired item c the desired option. For details on this procedure, see “Basic
setting operation” on page 48.
For details, see the pages listed below. “z” indicates the default setting.
53
DVD and other playback settings
Touch c “Visual” c the desired item c the desired option. For details on this procedure, see “Basic
setting operation” on page 48.
For details, see the pages listed below. “z” indicates the default setting.
54
Item Option Purpose Unit status
ZAPPIN Time (page 31) 6sec, 15sec To select the playback time During audio
(z), 30sec for the ZAPPIN function. playback
ZAPPIN Tone (page 31) ON (z) To have the beep sound
between track passages. During audio
OFF To deactivate the beep playback
sound.
Multi Disc Resume ON (z) To store the resume settings
in memory for up to 5
video* discs.
* DVD VIDEO/VCD/Xvid/
MPEG-4 only. No source
selected
OFF To not store the resume
settings in memory.
Resume playback is
available only for the
current disc in the unit.
USB Resume ON (z) To store resume settings in
memory for Xvid/MPEG-4
files in the USB device. No source
selected
OFF To not store the resume
settings in memory.
JPEG Slide Show 5sec (z), To select the slide show No source
20sec, 60sec, interval.
Fixed selected
Note
If parental control is applied, resume playback will not work. In this case, playback starts from the beginning of the
disc when it is inserted. 55
Setting the security code Setting the clock
This unit has a security function to discourage The clock uses a 12-hour indication.
theft. Enter a 4-digit number as your security
code. 1 Touch “Source List,” then .
Once the security function is activated, you need The general setting menu appears. If not,
to enter the security code to turn on the unit after touch “General.”
re-installing the unit in another car or charging 2 Touch “Clock Adjust.”
the battery. The setting display appears.
3 Set the hour and minute.
Activating the security function For example, to set to 8:30, touch “0830.”
1 Touch “Source List,” then . 4 Touch “AM” or “PM.”
The general setting menu appears. If not, 5 Touch “OK.”
touch “General.” The setting is complete.
2 Touch “Security Control.”
To delete an entered number, touch “Clear.”
The security code setting display appears.
To return to the previous display, touch “Back.”
3 Touch the number keys to enter your
security code, then touch “OK.”
4 To confirm, touch the number keys to
reenter your security code, then touch
“OK.”
The setting is complete.
To delete an entered number, touch “Clear.”
To return to the previous display, touch “Back.”
The 4-digit input prompt appears when you turn
on the unit after re-installing in another car or
charging the battery. Touch the number keys to
enter your security code.
56
Setting the type of device
Using Optional Equipment By setting the type (video or audio) of each
connected device, the background screen can be
Auxiliary audio/video switched accordingly.
equipment 1 While no source is selected, touch
“Source List,” then .
You can connect up to 2 optional devices, such as The general setting menu appears. If not,
a portable media player, game console, etc., to touch “General.”
the front AUX terminal and rear AUX terminals 2 Touch v/V to scroll, then touch “Front
on the unit. (The front AUX terminal is for audio AUX Input” or “Rear AUX Input.”
only.)
3 Touch “Audio” or “Video.”
“Audio” is available for “Front AUX Input”
Selecting an auxiliary device
or “Rear AUX Input,” while “Video” is
1 Touch “Source List,” then “AUX.” available only for “Rear AUX Input.”
The AUX playback display appears. The setting is complete.
To deactivate the AUX input, select “OFF.”
Source List ATT Top To return to the previous display, touch “Back.”
57
Rear view camera settings Additional Information
You can display setting items on the picture from
the rear view camera to assist operation. Precautions
This setting is available only when: • Cool off the unit beforehand if your car has been
– “Camera Input” is set to “ON” (page 50). parked in direct sunlight.
– the parking brake is applied. • Power antenna (aerial) extends automatically.
1 Touch “Source List,” then . Moisture condensation
The general setting menu appears. If not, Should moisture condensation occur inside the unit,
touch “General.” remove the disc and wait for about an hour for it to
2 Touch v/V to scroll, then touch “Rear dry out; otherwise the unit will not operate properly.
View Camera Setting.”
The setting items appear. To maintain high sound quality
Do not splash liquid onto the unit or discs.
Back Marker
Turn off engine but keep the key in the “IGN” position. Line Edit
Reversing the picture • Do not press on the LCD panel as doing so can
Touch “Mirror.” distort the picture or cause a malfunction (i.e., the
picture may become unclear, or the LCD panel
A mirror-reversed picture appears.
may be damaged).
• Do not touch other than with the finger, as it may
Editing lines damage or break the LCD panel.
• Clean the LCD panel with a dry soft cloth. Do not
1 Touch “Line Edit.”
use solvents such as benzine, thinner,
commercially available cleaners, or antistatic
Back spray.
• Do not use this unit outside the temperature range
1 Edit
1 5 – 45 ºC (41 – 113 ºF).
• If your car was parked in a cold or hot place, the
2 Edit
2 picture may not be clear. However, the monitor is
not damaged, and the picture will become clear
3 Edit
3 after the temperature in your car becomes normal.
• Some stationary blue, red or green dots may
Turn off engine but keep the key in the “IGN” position. Reset appear on the monitor. These are called “bright
spots,” and can happen with any LCD. The LCD
panel is precision-manufactured with more than
2 Select the line to edit. 99.99% of its segments functional. However, it is
Touch “1 Edit,” “2 Edit,” or “3 Edit” possible that a small percentage (typically 0.01%)
corresponding to the line to edit. of the segments may not light up properly. This
3 Edit the line. will not, however, interfere with your viewing.
To increase the length, touch B b.
To reduce the length, touch bB.
To adjust the position, touch V or v.
To restore the default setting, touch “Reset.”
To return to the previous display, touch “Back.”
58
Notes on finalizing discs
Notes on discs The following discs are required to be finalized to
• Do not expose discs to direct sunlight or heat play on this unit.
sources such as hot air ducts, nor leave it in a car • DVD-R/DVD-R DL (in video mode/VR mode)
parked in direct sunlight. • DVD-RW in video mode
• Before playing, wipe the discs • DVD+R/DVD+R DL
with a cleaning cloth from the • CD-R
center out. Do not use solvents • CD-RW
such as benzine, thinner, The following discs can be played without
commercially available finalization.
cleaners. • DVD+RW – automatically finalized.
• This unit is designed to play • DVD-RW in VR mode – finalization not required.
discs that conform to the For details, refer to the manual supplied with the
Compact Disc (CD) standard. disc.
DualDiscs and some of the music discs encoded
with copyright protection technologies do not
conform to the Compact Disc (CD) standard, Notes on Multi Session CDs/Multi
therefore, these discs may not be playable by this Border DVDs
unit. This unit can play Multi Session CDs/Multi Border
• Discs that this unit CANNOT play DVDs under the following conditions. Note that the
– Discs with labels, stickers, or sticky tape or session must be closed and the disc must be
paper attached. Doing so may cause a finalized.
malfunction, or may ruin the disc. • When CD-DA (Compact Disc Digital Audio) is
– Discs with non-standard shapes (e.g., heart, recorded in the first session:
square, star). Attempting to do so may damage The unit recognizes the disc as CD-DA and only
the unit. CD-DA of the first session is played, even if
– 8 cm (3 1/4 in) discs. another format (e.g., MP3) is recorded in other
sessions.
Note on playback operations of DVDs • When CD-DA is recorded other than in the first
session:
and VCDs The unit recognizes the disc as a DATA CD or
Some playback operations of DVDs and VCDs may DATA DVD, and all CD-DA sessions are skipped.
be intentionally set by software producers. Since • When an MP3/WMA/AAC/JPEG/Xvid/MPEG-4
this unit plays DVDs and VCDs according to the is recorded:
disc contents the software producers designed, some Only the sessions containing the selected file type
playback features may not be available. Also, refer (audio/video/image)* are played (if CD-DA or
to the instructions supplied with the DVDs or other data exists in other sessions, they are
VCDs. skipped).
* For details on how to select the file type, see
Notes on DATA CDs and DATA DVDs page 31.
• Some DATA CDs/DATA DVDs (depending on the
equipment used for its recording, or the disc
condition) may not play on this unit. Playback order of MP3/WMA/AAC/
• Finalization is required for some discs (page 59).
• The unit is compatible with the following
JPEG/Xvid/MPEG-4 files
standards. MP3/WMA/AAC/ Folder
For DATA CDs JPEG/Xvid/ (album)
– ISO 9660 level 1/level 2 format, Joliet/Romeo in MPEG-4
MP3/WMA/AAC/
the expansion format JPEG/Xvid/
– Multi Session MPEG-4 file
For DATA DVDs (track/image/
– UDF Bridge format (combined UDF and ISO video)
9660)
– Multi Border
• The maximum number of:
– folders (albums): 256 (including root and empty
folders).
– files (tracks/images/videos) and folders
contained in a disc: 2,000 (if a folder/file names
contain many characters, this number may
become less than 2,000).
– displayable characters for a folder/file name: 64
(Joliet/Romeo).
59
About MP3 files About MPEG-4 files
• MP3, which stands for MPEG-1 Audio Layer-3, is MPEG-4 files meeting the following
a music file compression format standard. It requirements can be played. Playback is not be
compresses audio CD data to approximately 1/10 guaranteed for all MPEG-4 files meeting the
of its original size. requirements.
• ID3 tag versions 1.0, 1.1, 2.2, 2.3 and 2.4 apply to • Profile: MPEG-4 Simple profile
MP3 only. ID3 tag is 15/30 characters (1.0 and • Bit rate: Max. 7 Mbps on USB FS, 10 Mbps on
1.1), or 63/126 characters (2.2, 2.3 and 2.4). DVD, 7 Mbps on CD
• When naming an MP3 file, be sure to add the file • Frame rate: Max. 30 fps
extension “.mp3” to the file name. • Image size: Max. 720 × 480 pixels
• During playback or fast-forward/reverse of a VBR • Audio: Max. 320 kbps (AAC-LC)
(Variable Bit Rate) MP3 file, elapsed playback • File extension: .mp4
time may not display accurately.
Note on MP3
If you play a high-bit-rate MP3, such as 192 kbps, About iPod
sound may be intermittent.
• You can connect to the following iPod models.
Update your iPod devices to the latest software
About WMA files before use.
Made for
• WMA, which stands for Windows Media Audio, – iPod touch (4th generation)
is a music file compression format standard. It – iPod touch (3rd generation)
compresses audio CD data to approximately 1/22* – iPod touch (2nd generation)
of its original size. – iPod touch (1st generation)
• WMA tag is 63 characters. – iPod classic
• When naming a WMA file, be sure to add the file – iPod with video*
extension “.wma” to the file name. – iPod nano (6th generation)
• During playback or fast-forward/reverse of a VBR – iPod nano (5th generation)
(Variable Bit Rate) WMA file, elapsed playback – iPod nano (4th generation)
time may not display accurately. – iPod nano (3rd generation)
* only for 64 kbps – iPod nano (2nd generation)
– iPod nano (1st generation)*
Note on WMA – iPhone 4
Playback of the following WMA files is not supported.
– iPhone 3GS
– lossless compression
– copyright-protected
– iPhone 3G
– iPhone
* Passenger control is not available for iPod nano (1st
About AAC files generation) or iPod with video.
• AAC tag is 126 characters. • “Made for iPod,” and “Made for iPhone” mean
• When naming an AAC file, be sure to add the file that an electronic accessory has been designed to
extension “.m4a” to the file name. connect specifically to iPod or iPhone,
respectively, and has been certified by the
developer to meet Apple performance standards.
About JPEG files Apple is not responsible for the operation of this
device or its compliance with safety and
• JPEG, which stands for Joint Photographic regulatory standards. Please note that the use of
Experts Group, is an image file compression this accessory with iPod or iPhone may affect
format standard. It compresses still images wireless performance.
approximately 1/10 to 1/100 of original size.
• When naming a JPEG file, be sure to add the file
extension “.jpg” to the file name.
Note on JPEG
Playback of progressive JPEG files is not supported.
60
• We do not take any responsibility for the leakage
About Bluetooth function of information during Bluetooth communication.
The following applies only to XAV-62BT. • Connection with all Bluetooth devices cannot be
guaranteed.
What is Bluetooth technology? – A device featuring Bluetooth function is
• Bluetooth wireless technology is a short-range required to conform to the Bluetooth standard
wireless technology that enables wireless data specified by Bluetooth SIG, and be
communication between digital devices, such as a authenticated.
cellular phone and a headset. Bluetooth wireless – Even if the connected device conforms to the
technology operates within a range of about 10 m above mentioned Bluetooth standard, some
(about 33 feet). Connecting two devices is devices may not be connected or work correctly,
common, but some devices can be connected to depending on the features or specifications of the
multiple devices at the same time. device.
• You do not need to use a cable for connection – While talking on the phone handsfree, noise may
since Bluetooth technology is a wireless occur, depending on the device or
technology, neither is it necessary for the devices communication environment.
to face one another, such is the case with infrared • Depending on the device to be connected, it may
technology. For example, you can use such a require some time to start communication.
device in a bag or pocket.
• Bluetooth technology is an international standard Others
supported by millions of companies all over the • Using the Bluetooth device may not function on
world, and employed by various companies cellular phones, depending on radio wave
worldwide. conditions and location where the equipment is
being used.
On Bluetooth communication • If you experience discomfort after using the
• Bluetooth wireless technology operates within a Bluetooth device, stop using the Bluetooth device
range of about 10 m. immediately. Should any problem persist, consult
Maximum communication range may vary your nearest Sony dealer.
depending on obstacles (person, metal, wall, etc.)
or electromagnetic environment. If you have any questions or problems concerning
• The following conditions may affect the your unit that are not covered in these Operating
sensitivity of Bluetooth communication. Instructions, consult your nearest Sony dealer.
– There is an obstacle such as a person, metal, or
wall between this unit and Bluetooth device.
– A device using 2.4 GHz frequency, such as a Maintenance
wireless LAN device, cordless telephone, or
microwave oven, is in use near this unit.
• Because Bluetooth devices and wireless LAN Replacing the lithium battery of the
(IEEE802.11b/g) use the same frequency, remote commander
microwave interference may occur and result in Under normal conditions, the battery will last
communication speed deterioration, noise, or approximately 1 year. (The service life may be
invalid connection if this unit is used near a shorter, depending on the conditions of use.)
wireless LAN device. In such as case, perform the When the battery becomes weak, the range of the
following. remote commander becomes shorter. Replace the
– Use this unit at least 10 m away from the battery with a new CR2025 lithium battery. Use of
wireless LAN device. any other battery may present a risk of fire or
– If this unit is used within 10 m of a wireless explosion.
LAN device, turn off the wireless LAN device.
– Install this unit and Bluetooth device as near to + side up
each other as possible.
• Microwaves emitting from a Bluetooth device may
affect the operation of electronic medical devices.
c
Turn off this unit and other Bluetooth devices in
the following locations, as it may cause an
accident. Notes on the lithium battery
– where inflammable gas is present, in a hospital, • Keep the lithium battery out of the reach of children.
train, airplane, or petrol station Should the battery be swallowed, immediately
– near automatic doors or a fire alarm consult a doctor.
• This unit supports security capabilities that • Wipe the battery with a dry cloth to assure a good
comply with the Bluetooth standard to provide a contact.
secure connection when the Bluetooth wireless • Be sure to observe the correct polarity when
technology is used, but security may not be installing the battery.
enough depending on the setting. Be careful when
communicating using Bluetooth wireless continue to next page t
technology.
61
• Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur. Specifications
Monitor section
WARNING
Battery may explode if mistreated. Display type: Wide LCD color monitor
Dimensions: 6.1 in
Do not recharge, disassemble, or dispose of System: TFT active matrix
in fire. Number of pixels:
1,152,000 pixels (800 × 3 (RGB) × 480)
Color system:
Fuse replacement PAL/NTSC/SECAM/PAL-M automatic select
When replacing the fuse, be
sure to use one matching the Tuner section
amperage rating stated on the FM
original fuse. If the fuse blows,
check the power connection and Tuning range:
87.5 – 108.0 MHz (at 100 kHz step)
replace the fuse. If the fuse 87.5 – 107.9 MHz (at 200 kHz step)
blows again after replacement, FM tuning step: 100 kHz/200 kHz switchable
there may be an internal Antenna (aerial) terminal:
malfunction. In such a case, Fuse (10A) External antenna (aerial) connector
consult your nearest Sony Intermediate frequency: 150 kHz
dealer. Usable sensitivity: 10 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 70 dB (mono)
Removing the unit Separation: 40 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
1 Insert both release keys AM
simultaneously until they click. Tuning range: 530 – 1,710 kHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Sensitivity: 26 µV
62
*2 The actual range will vary depending on factors Region code
such as obstacles between devices, magnetic The region system is used to protect software
fields around a microwave oven, static electricity, copyrights.
reception sensitivity, antenna’s performance, The region code is located on the bottom of the unit,
operating system, software application, etc. and only DVDs labeled with an identical region code
*3 Bluetooth standard profiles indicate the purpose of can be played on this unit.
Bluetooth communication between devices.
DVDs labeled ALL can also be played.
Power amplifier section If you try to play any other DVD, the message
Outputs: Speaker outputs “Playback prohibited by region code.” will appear on
Speaker impedance: 4 – 8 ohms the monitor screen. Depending on the DVD, no region
Maximum power output: 52 W × 4 (at 4 ohms) code may be labeled even though playing the DVD is
prohibited by area restrictions.
General
Outputs: System requirements for the software
Video output terminal (rear) in the supplied CD-ROM
Audio output terminals (rear/sub switchable)
Power antenna (aerial) relay control terminal Computer
Power amplifier control terminal • CPU/RAM
Inputs: – IBM PC/AT compatible machine
Telephone ATT control terminal – CPU: Intel Pentium III Processor 450 MHz or
Illumination control terminal higher
Remote controller input terminal – RAM: 256 MB or more (For Windows XP), 512
Antenna (aerial) input terminal MB or more (For Windows Vista or later)
Parking break control terminal • CD-ROM drive
Microphone input terminal (XAV-62BT only) • USB port
Reverse input terminal OS
Camera input terminal
AUX audio input terminals (front/rear) Windows XP, Windows Vista, Windows 7
AUX video input terminal For details on compatible editions or Service Packs,
USB signal input connector visit the following support site:
External input terminal Customers in Latin America:
Power requirements: 12 V DC car battery http://esupport.sony.com/ES/LA/
(negative ground (earth)) Customers in Pan Asia:
Dimensions: Approx. 178 × 100 × 170 mm http://www.sony-asia.com/section/support
(7 1/8 × 4 × 6 3/4 in) (w/h/d) http://www.sony-asia.com/caraudio/
Mounting dimensions: Approx. 182 × 111 × 164 mm
(7 1/4 × 4 3/8 × 6 1/2 in) (w/h/d) Monitor
Mass: Approx. 1.9 kg (4 lb 3 oz) High color (16-bit) or more, 800 × 600 pixels or more
Supplied accessories: Other
Remote Commander: RM-X170 Internet connection
Parts for installation and connections (1 set)
Microphone (XAV-62BT only) Notes
CD-ROM (Application disc) • The following system environments are not
Optional accessories/equipment: supported.
USB and Video connection cable for iPod: – Non IBM PC type computers, such as Macintosh,
RC-202IPV, RC-200IPV etc.
Rear View Camera: XA-R800C – Homemade computers
– OS upgraded computers
Your dealer may not handle some of the above listed – Multi-display environment
accessories. Please ask the dealer for detailed – Multi-boot environment
information. – Virtual machine environment
• Depending on the computer condition, operation
may not be possible even with the recommended
US and foreign patents licensed from Dolby environment.
Laboratories.
63
The Auto Off function does not operate.
Troubleshooting The unit is turned on. The Auto Off function activates
after turning off the unit.
The following checklist will help you remedy t Exit the source.
problems you may encounter with your unit.
Before going through the checklist below, check the Operation of the remote commander is not
connection and operating procedures. possible.
If the Monitor Off function is activated (no lighting),
If the problem is not solved, visit the following operation of the remote commander is not possible
support site. (page 11).
The menu items cannot be selected.
Support site Unavailable menu items are displayed in gray.
AUX cannot be selected as the source.
Customers in Latin America:
All AUX input settings are set to “OFF.”
http://esupport.sony.com/ES/LA/ t Set “Front AUX Input” to “Audio” or “Rear AUX
Customers in Pan Asia: Input” to “Video” or “Audio” (page 57).
http://www.sony-asia.com/section/support “Front AUX” cannot be selected.
http://www.sony-asia.com/caraudio/ An iPod is connected via the USB connector.
t Disconnect the iPod (page 29).
64
RDS Sound
PTY displays “None.” There is no sound/sound skips/sound cracks.
• The current station is not an RDS station. • A connection has not been made correctly.
• RDS data has not been received. • Check the connection to the connected equipment,
• The station does not specify the program type. and set the input selector of the equipment to the
source corresponding to this unit.
• The disc is defective or dirty.
Picture • Installation is not correct.
There is no picture/picture noise occurs. t Install the unit at an angle of less than 45° in a
• A connection has not been made correctly. sturdy part of the car.
• Check the connection to the connected equipment, • The MP3 file sampling rate is not 32, 44.1, or
and set the input selector of the equipment to the 48 kHz.
source corresponding to this unit. • The WMA file sampling rate is not 32, 44.1, or
• The disc is defective or dirty. 48 kHz.
• Installation is not correct. • The AAC file sampling rate is not 44.1 or 48 kHz.
t Install the unit at an angle of less than 45° in a • The MP3 file bit rate is not 48 to 192 kbps.
sturdy part of the car. • The WMA file bit rate is not 64 to 192 kbps.
• The parking cord (light green) is not connected to the • The AAC file bit rate is not 40 to 320 kbps.
parking brake switch cord, or the parking brake is not • The unit is in pause/reverse/fast-forward mode.
applied. • The settings for the outputs are not made correctly.
The picture does not fit in the screen. • The DVD output level is too low (page 21).
The aspect ratio is fixed on the DVD. • The volume is too low.
• The ATT function is activated, or the Telephone ATT
There is no picture/picture noise occurs in the function (when the interface cable of a car telephone
rear monitor. is connected to the ATT lead) is activated.
• A source/mode which is not connected is selected. If • The position of the fader control “Fader” is not set for
there is no input, no picture appears in the rear a 2-speaker system.
monitor. • The format is not supported (such as DTS).
• The color system setting is incorrect. t Check if the format is supported by this unit
t Set the color system to “PAL” or “NTSC” (page 9).
according to the connected monitor (page 49).
• The picture of the rear view camera is displayed on Sound is noisy.
this unit. Keep cords and cables away from each other.
t No picture appears in the rear monitor if the
picture of the rear view camera is displayed on Disc operation
this unit.
The disc cannot be loaded.
• Another disc is already loaded.
• The disc has been forcibly inserted upside down or in
the wrong way.
The disc does not play.
• The disc is defective or dirty.
• The disc is not playable.
• The DVD is not playable due to the region code.
• The disc is not finalized (page 59).
• The disc format and file version are incompatible
with this unit (page 9, 59).
• Press Z to remove the disc.
MP3/WMA/AAC/JPEG/Xvid/MPEG-4 files do not
play.
• Recording was not performed according to the ISO
9660 level 1 or level 2 format or the Joliet or Romeo
expansion format (DATA CD), or the UDF Bridge
format (DATA DVD) (page 59).
• The file extension is incorrect (page 60).
• Files are not stored in MP3/WMA/AAC/JPEG/Xvid/
MPEG-4 format.
• If the disc contains multiple file types, only the
selected file type (audio/video/image) can be played.
t Select the appropriate file type using the list
(page 31).
66
The volume of the connected Bluetooth device
is low or high.
Error displays/messages
Volume level will differ depending on the Bluetooth
device. Bluetooth device is not found.
t Reduce the volume level differences between this The unit cannot detect a connectable Bluetooth device.
unit and the Bluetooth device (page 41). t Check the Bluetooth setting of the connecting
device.
No sound is output during audio streaming.
The connected Bluetooth device is paused. Busy now… Please try again.
t Cancel pause of the Bluetooth device. The unit is busy.
t Wait for a moment and try again.
The sound skips during audio streaming.
• Reduce the distance between the unit and the Cannot read.
Bluetooth device. • The unit cannot read the data due to some problem.
• If the Bluetooth device is stored in a case which • The data is damaged or corrupted.
interrupts the signal, remove the case while using the • The disc is corrupted.
device. • The disc is incompatible with this unit.
• Several Bluetooth devices or other devices which • The disc is not finalized.
emit radio waves are used nearby. Disc Error
t Turn off the other devices. • The disc is dirty or inserted upside down.
t Increase the distance from the other devices. t Clean or insert the disc correctly.
• The playback sound stops momentarily when this • A blank disc has been inserted.
unit is connecting to a cellular phone. This is not a • The disc cannot play due to a problem.
malfunction. t Insert another disc.
You cannot control the connected Bluetooth • The disc is not compatible with this unit.
device during audio streaming. t Insert a compatible disc.
Check that the connected Bluetooth device supports • Press Z to remove the disc.
AVRCP. Disc Reading...
Some functions do not work. The unit is reading all file/album (folder) information
Check that the connecting device supports the on the disc.
functions in question. t Wait until reading is complete and playback starts
automatically. Depending on the disc structure, it
The name of the other party does not appear
may take more than a minute.
when a call is received.
• The other party is not stored in the phonebook. Error
t Add the other party to the phonebook (page 38).
For XAV-62BT and XAV-622
• The calling phone is not set to send the phone
• The USB device was not automatically recognized.
number.
t Reconnect it again.
A call is answered unintentionally.
• The connecting phone is set to start a call For XAV-62BT only
automatically. • Phonebook content has changed during cellular
• “Auto Answer” of this unit is set to “Short” or phone access.
“Long” (page 42). t Access the phonebook again.
• Phonebook access was disconnected by the cellular
Pairing failed due to time out.
phone.
Depending on the connecting device, the time limit for
t Access the phonebook again.
pairing may be short. Try completing the pairing
• Phonebook download from the cellular phone failed
within the time by setting a single digit passkey.
due to a problem.
The Bluetooth function cannot be operated. t Download the phonebook again (page 38).
Exit the source by pressing and holding • Phonebook browsing from the cellular phone failed
(SOURCE/OFF) for 1 second, then turn on the unit. due to a problem.
No sound is output from the car speakers t Retry browsing (page 39).
during a handsfree call. • Phonebook listing from the cellular phone failed due
If the sound is output from the cellular phone, set the to a problem.
cellular phone to output the sound from the car t Retry listing (page 39).
speakers. Error - Please select ‘initialize’ from the
Bluetooth settings menu.
A memory error has occurred.
t Initialize the Bluetooth setting (page 42).
Handsfree device is not available.
A cellular phone is not connected.
t Connect a cellular phone (page 35).
68
Language code/area code list
Language code list
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code Language Code Language Code Language Code Language
H
Handsfree calling 35
High Pass Filter (HPF) 52
70
P S
PAL 49 Screen aspect ratio
Parental control settings (Aspect) 47, 53
(DVD Parental Control) 21, 54 Screen settings (Screen) 53
Passenger control Security function
(Passenger Control) 30 (Security Control) 56
Picture EQ 46, 53 SensMe™ 25
Play menu (Play Menu) 18 Shuffle play
Playable discs 9 (Shuffle) 22, 24, 30
Playback control Slide show interval
(Video CD PBC) 20, 55 (JPEG Slide Show) 55
Playback settings (Visual) 54 Slow-motion play 18
Program Types (PTY) 16, 17 Sound settings (Sound) 51
Speaker volume
R (4.1ch Speaker Level) 45
Subtitle language
Radio Data System (RDS) 16
(Subtitle, DVD Subtitle
Rear Bass Enhancer
Language) 19, 54
(RBE) 45, 52
Subwoofer position 44
Rear speaker/subwoofer
Subwoofer volume
setting (Rear/Sub) 14, 52
(Balance/Fader) 43, 51
Rear view camera 57
Rear view camera input
(Camera Input) 50 T
Rear view camera settings Touch panel calibration
(Rear View Camera Setting) (Touch Panel Adjust) 46
58
Receive menu U
(Receive Menu) 15
USB device 24
Remote Commander
USB resume playback
12, 14, 61
(USB Resume) 55
Repeat play
(Repeat) 22, 24, 30
Reset 14 V
Resume play 18 Volume 10
Ringtone (Ringtone) 42
Rotary commander
(Rotary Commander) 50
W
WMA 9, 60
X
Xvid 9
Z
ZAPPIN beep sound
(ZAPPIN Tone) 55
ZAPPIN playback time
(ZAPPIN Time) 55
ZAPPIN™ 31
71
Asegúrese de instalar esta unidad en el tablero Advertencia: si el encendido del
del automóvil para seguridad. Para obtener automóvil no dispone de una posición
información sobre la instalación y las ACC
conexiones, consulte el manual de Asegúrese de seleccionar la función
“Instalación/Conexiones” suministrado. desconexión automática (página 51).
La unidad se apagará automáticamente en el
tiempo definido cuando no seleccione
ninguna fuente, lo que permite evitar el
Acerca de este manual
desgaste de la batería.
• Este manual contiene instrucciones para los
Si no selecciona la función desconexión
modelos XAV-62BT y XAV-622. automática, mantenga presionado
• XAV-62BT es el modelo que se utiliza de (SOURCE/OFF) hasta que la pantalla
manera representativa con fines ilustrativos. desaparezca siempre que apague el
• Las descripciones y las funciones de encendido.
Bluetooth corresponden sólo al modelo
XAV-62BT.
PRECAUCIÓN
El uso de instrumentos ópticos con este producto
aumenta el riesgo de sufrir daños oculares. No
intente desmontar la carcasa, puesto que el haz
láser utilizado en este reproductor de CD/DVD
es perjudicial para los ojos. Solicite asistencia
técnica únicamente a personal especializado.
2
Tabla de contenidos
Operaciones de iPod
Reproducción de un iPod . . . . . . . . . . . . . . . . 30
Ajuste del modo de reproducción . . . . . . . . . . 31
Reproducción repetida y aleatoria . . . . . . . . . 31
Uso directo de un iPod
— Control del pasajero . . . . . . . . . . . . . . . . . . 31
4
Información complementaria
Precauciones . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Notas sobre el panel LCD . . . . . . . . . . . . . . 61
Notas sobre los discos. . . . . . . . . . . . . . . . . 62
Orden de reproducción de los archivos MP3/
WMA/AAC/JPEG/Xvid/MPEG-4 . . . . . . . 63
Acerca de los archivos MP3 . . . . . . . . . . . . 63
Acerca de los archivos WMA . . . . . . . . . . . 63
Acerca de los archivos AAC. . . . . . . . . . . . 63
Acerca de los archivos JPEG . . . . . . . . . . . 63
Acerca de los archivos MPEG-4. . . . . . . . . 63
Acerca de iPod . . . . . . . . . . . . . . . . . . . . . . 64
Acerca de la función Bluetooth . . . . . . . . . 64
Mantenimiento. . . . . . . . . . . . . . . . . . . . . . . . . 65
Extracción de la unidad . . . . . . . . . . . . . . . . . . 65
Especificaciones . . . . . . . . . . . . . . . . . . . . . . . 66
Solución de problemas . . . . . . . . . . . . . . . . . . 67
Indicaciones/mensajes de error . . . . . . . . . . 71
Lista de códigos de idiomas/códigos de
área . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Índice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Clientes de Latinoamérica:
http://esupport.sony.com/ES/LA/
Para clientes de Asia y del Pacífico:
http://www.sony-asia.com/section/support
http://www.sony-asia.com/caraudio/
Proporciona información acerca de:
• Modelos y fabricantes de reproductores de audio digital compatibles
• Los modelos y fabricantes de teléfonos celulares compatibles, así como las
respuestas a las preguntas más frecuentes sobre la función Bluetooth (sólo
para el modelo XAV-62BT)
5
Notas sobre seguridad Notas sobre la instalación
• Respete las reglas, leyes y regulaciones locales de • Se recomienda que esta unidad sea instalada por
tráfico. un técnico o personal de servicio calificado.
• Mientras maneja – Si la intenta instalar usted mismo, consulte el
– No mire ni haga funcionar la unidad, puesto que manual de “Instalación/Conexiones”
podría distraerse y causar un accidente. suministrado y realice correctamente la
Estacione el automóvil en un lugar seguro para instalación.
mirar o hacer funcionar la unidad. – Una instalación incorrecta podría provocar
– No use la característica de configuración ni desgaste de la batería o bien un cortocircuito.
ninguna otra función que pudiera desviar su • Si la unidad no funciona correctamente,
atención del camino. compruebe primero las conexiones; para ello
– Cuando retroceda, asegúrese de mirar consulte el manual de “Instalación/Conexiones”
hacia atrás y de observar atentamente suministrado. Si todo está en orden, compruebe el
los alrededores por su seguridad, fusible.
incluso si está conectada la vista cámara • Proteja la superficie de la unidad para que no se
posterior. No depende exclusivamente dañe.
de la vista cámara posterior. – No exponga la superficie de la unidad a
• Mientras esté en funcionamiento productos químicos, como insecticida, laca para
– No inserte las manos, los dedos u objetos el cabello, repelente de insectos, etc.
extraños en la unidad, puesto que esto podría – No deje materiales de goma ni de plástico en
provocarle lesiones o dañar la unidad. contacto con la unidad por períodos
– Mantenga los artículos pequeños fuera del prolongados. De lo contrario, el acabado de ésta
alcance de los niños. se podría dañar o bien se podría deformar.
– Asegúrese de que se abrochen los cinturones de • Cuando realice la instalación, asegúrese de fijar
seguridad para evitar lesiones en caso de un firmemente.
movimiento repentino del automóvil. • Cuando realice la instalación, asegúrese de apagar
el encendido. Si la unidad se instala con el
Prevención de accidentes encendido activado se podría desgastar la batería o
Las imágenes aparecen solamente después de provocar un cortocircuito.
haber estacionado el automóvil y de haber • Cuando realice la instalación, asegúrese de no
accionado el freno de mano. dañar con el taladro ninguna parte del automóvil,
Si el automóvil comienza a moverse durante la como tuberías, tubos, el tanque de combustible o
reproducción, la imagen automáticamente cambia el cableado, puesto que esto podría provocar un
a la pantalla de fondo después de mostrar la incendio o causar un accidente.
siguiente precaución.
“Video bloqueado por su seguridad.”
El monitor conectado a REAR VIDEO OUT
(Salida posterior de video) está activo mientras el
automóvil está en movimiento.
La imagen en la pantalla cambia a la pantalla de
fondo, pero la fuente de audio se puede seguir
escuchando.
No opere la unidad ni mire el monitor mientras
maneja.
6
Derechos de autor
Fabricado bajo licencia de
Dolby Laboratories. La tecnología de reconocimiento de música y los
“Dolby” y el símbolo de la datos afines son proporcionados por Gracenote®.
doble D son marcas comerciales de Dolby Gracenote es la norma de la industria en
Laboratories. tecnología de reconocimiento de música y
entrega de contenidos afines. Si desea más
Microsoft, Windows, Windows Vista y información, visite www.gracenote.com.
Windows Media y los logotipos son marcas Los derechos de autor de CD, DVD, discos
comerciales o marcas registradas de Microsoft
Blu-ray y datos relacionados con la música y los
Corporation en los Estados Unidos y/u otros países.
vídeos de Gracenote, Inc. (copyright © 2000) son
propiedad ahora de Gracenote. Los derechos de
Este producto está protegido por los derechos de autor de Gracenote Software (copyright © 2000)
propiedad intelectual de Microsoft Corporation. son propiedad ahora de Gracenote. Una o varias
Queda prohibido el uso o la distribución de esta patentes propiedad de Gracenote son aplicables a
tecnología fuera de este producto si no se dispone este producto y servicio. Consulte el sitio web de
de una licencia de Microsoft o una división
autorizada de Microsoft.
Gracenote para acceder a una lista no exhaustiva
de las patentes de Gracenote aplicables.
“DVD VIDEO”, “DVD-R”, “DVD-RW”, Gracenote, CDDB, MusicID, MediaVOCS, el
“DVD+R” y “DVD+RW” son marcas registradas. logotipo Gracenote y el logotipo “Powered by
Gracenote” son marcas comerciales registradas o
La marca de la palabra y logotipos de Bluetooth son marcas comerciales de Gracenote en Estados
propiedad de Bluetooth SIG, Inc. y Sony
Unidos y otros países.
Corporation posee licencia para utilizar cualquiera
de dichas marcas. Otras marcas registradas y Este producto usa datos de fuente que cuentan con
nombres comerciales pertenecen a sus respectivos licencia de Monotype Imaging Inc. o sus filiales
propietarios. para Sony.
ZAPPIN es una marca registrada de Sony iPhone, iPod, iPod classic, iPod nano, y iPod touch
Corporation. son marcas comerciales de Apple Inc., registradas
en los Estados Unidos y otros países.
12 TONE ANALYSIS y su
logotipo son marcas Apple, Macintosh e iTunes son marcas registradas
registradas de Sony de Apple Inc., registradas en los Estados Unidos y
Corporation. otros países.
“WALKMAN” y el ESTE PRODUCTO ESTÁ AUTORIZADO POR
logotipo de LA LICENCIA DE CARTERA DE PATENTES DE
“WALKMAN” son MPEG-4 VISUAL PARA USO PERSONAL Y NO
marcas comerciales COMERCIAL DE UN CLIENTE PARA LA
registradas de Sony DECODIFICACIÓN DE VIDEO MPEG-4
Corporation. CODIFICADO POR UN CONSUMIDOR
INVOLUCRADO EN UNA ACTIVIDAD
PERSONAL Y NO COMERCIAL Y/O QUE SE
SensMe y el logotipo de SensMe OBTUVO DE UN PROVEEDOR DE VIDEO CON
son marcas comerciales o marcas LICENCIA OTORGADA POR MPEG LA PARA
comerciales registradas de Sony PROPORCIONAR VIDEO MPEG-4. NO SE
Ericsson Mobile OTORGA NINGUNA LICENCIA NI SE
Communications AB. CONSIDERA IMPLÍCITA PARA NINGÚN OTRO
USO. NO SE OTORGA NINGUNA LICENCIA NI
SE CONSIDERA IMPLÍCITA PARA NINGÚN
OTRO USO. MPEG LA, LLC PUEDE
PROPORCIONAR INFORMACIÓN
COMPLEMENTARIA, INCLUIDA LA
RELACIONADA CON USOS
PROMOCIONALES, INTERNOS Y
COMERCIALES, Y LICENCIAS. CONSULTE
HTTP://WWW.MPEGLA.COM
Todas las demás marcas comerciales son marcas
comerciales de sus respectivos propietarios. 7
Llamadas de emergencia
Notas sobre Bluetooth (sólo el Este sistema de manos libres Bluetooth para
automóvil y el dispositivo electrónico conectado a
modelo XAV-62BT) dicho sistema funcionan con señales de radio, redes
de telefonía celular y fija, como asimismo con una
Precaución función programada por el usuario, la cual no puede
EN NINGÚN CASO, SONY SERÁ garantizar una conexión en todas las condiciones.
RESPONSABLE DE NINGÚN DAÑO Por lo tanto, no confíe únicamente en un dispositivo
INCIDENTAL, INDIRECTO O RESULTANTE NI electrónico para comunicaciones esenciales (como
DE OTROS DAÑOS, INCLUIDOS, PERO SIN emergencias médicas).
LIMITARSE A PÉRDIDA DE UTILIDADES, Recuerde, a fin de realizar o recibir llamadas, el
PÉRDIDA DE INGRESOS, PÉRDIDA DE sistema de manos libres y el dispositivo electrónico
DATOS, PÉRDIDA DE USO DEL PRODUCTO O conectado a éste se deben activar en un área de
CUALQUIER EQUIPO ASOCIADO, TIEMPO DE servicio con intensidad de señal celular adecuada.
INACTIVIDAD Y TIEMPO DEL COMPRADOR Tal vez no se puedan realizar llamadas de
RELACIONADO O QUE SURJA DEL USO DE emergencia en todas las redes de telefonía celular o
ESTE PRODUCTO, SU HARDWARE Y/O SU cuando ciertos servicios de redes y/o funciones
SOFTWARE. telefónicas estén en uso.
Verifique con el proveedor de servicio local.
¡AVISO IMPORTANTE!
Uso seguro y eficaz
Los cambios o modificaciones realizados a esta
unidad que no sean expresamente aprobados por
Sony podrían anular la autoridad del usuario para
utilizar el equipo.
Compruebe las excepciones, debido a requisitos o
limitaciones nacionales, en el uso del equipo de
Bluetooth antes de utilizar este producto.
Conducción
Verifique las leyes y regulaciones sobre el uso de
teléfonos celulares y equipos de manos libres en las
áreas donde maneje.
Siempre preste toda su atención cuando maneje,
salga del camino y estaciónese antes de realizar o
contestar una llamada si las condiciones de manejo
así lo requieren.
Exposición a radiofrecuencia
Las señales de radiofrecuencia pueden afectar a los
sistemas electrónicos instalados en forma incorrecta
o mal protegidos en los automóviles, como sistemas
de inyección electrónica de combustible, sistemas
de freno electrónico antideslizante (antibloqueo),
sistemas de control electrónico de la velocidad o
sistemas de bolsas de aire. Para obtener información
sobre la instalación o servicio de este dispositivo,
consulte con el fabricante o con el representante de
su automóvil. Una instalación o servicio con fallas
podría ser peligrosa e invalidar cualquier garantía
que se aplicara a este dispositivo.
Consulte con el fabricante del automóvil para
asegurarse de que el uso del teléfono celular en el
automóvil no afectará su sistema electrónico.
Compruebe periódicamente que todos los equipos
del dispositivo inalámbrico en el vehículo estén
instalados y que funcionen correctamente.
8
Discos que se pueden reproducir y símbolos usados en este Manual
de instrucciones
Esta unidad puede reproducir distintos tipos de discos de video y audio.
En la tabla a continuación puede comprobar qué discos son compatibles con esta unidad, además de
conocer las funciones disponibles para cada tipo de disco.
DVD VIDEO
DVD-R* / DVD-R DL*1 / DVD-RW*1
1
VIDEO
Audio CD
CD-ROM*2/CD-R*2/CD-RW*2
*1 También permite el almacenamiento de archivos de audio.
*2 También permite el almacenamiento de archivos de video o imagen.
Nota
El término “DVD” se puede utilizar en este Manual de instrucciones como término genérico para discos DVD
VIDEO, DVD-R/DVD-RW y DVD+R/DVD+RW.
9
Ubicación y función de los controles/terminales
Unidad principal
10
La pantalla muestra A Tecla “Lista fuentes”
Cuando no hay fuente seleccionada:
Toque para abrir la lista de fuentes.
1 2 B Tecla “Arriba”
XAV-62BT
Toque esta tecla para abrir el menú superior.
Lista fuentes Arriba XAV-622
Toque esta tecla para abrir la lista de fuentes.
D Tecla (Cerrar)
Toque para cerrar el menú.
ATT Arriba
K Tecla “Arriba”/tecla “M.OFF”
Esta tecla cambia según el modelo.
XAV-62BT: Tecla “Arriba”
XAV-622: Tecla “M.OFF”
Sintonizador Disco AUX
Consulte más arriba para ver la función de
cada tecla.
*1 Sólo aparece cuando se selecciona una fuente.
*2 Disponible sólo en el modelo XAV-62BT.
iPod/USB SensMe™ Audio BT *3 “Audio BT” aparece sólo en el modelo XAV-62BT.
*3
0
11
RM-X170 Control remoto
8
1
9
2 q;
3 qa
4
qs
5 qd
qf
6
qg
7 qh
K Botones de configuración de la
reproducción del DVD
(AUDIO):
Presione para cambiar el idioma o el
formato de reproducción del audio.
(Con VCD/CD/MP3/WMA/AAC/MPEG-
4, permite cambiar el canal de audio).
(SUBTITLE):
Presione para cambiar el idioma de los
subtítulos.
(ANGLE):
Presione para cambiar el ángulo de
visualización.
(TOP MENU):
Presione para abrir el menú principal de un
DVD.
(MENU):
Presione para abrir el menú de un disco.
L Botón ZAP
Presione para ingresar en el modo
ZAPPIN™.
14
Radio Controles de recepción
Toque la pantalla si no aparecen los controles de
Escuchar la radio recepción.
1 2 3
1 Toque “Lista fuentes” y, a
continuación, “Sintonizador”. Lista fuentes ATT Arriba
(Sólo para el modelo XAV-62BT: En el menú
superior, toque “Fuente AV” y, a
continuación, toque “Sintonizador”).
Aparece la pantalla de recepción de radio y
automáticamente se muestra la lista de
presintonías.
Menú re- Lista Lista
Banda
cepción presint. PTY
Lista fuentes ATT Arriba
P1 P2 P3 BTM 4 56 7 8 9
P4 P5 P6 Memoria
1 “Lista fuentes”
Toque para abrir la lista de fuentes.
Menú re- Lista Lista
Banda
cepción presint. PTY (página 11)
2 “ATT”
Toque para atenuar el sonido. Para
2 Toque “Banda”. cancelar, toque nuevamente.
Aparece la lista de bandas.
3 “Arriba”
Lista fuentes ATT Arriba
XAV-62BT
Toque esta tecla para abrir el menú
superior. (página 11)
XAV-622
FM1 FM2 FM3 AM1 AM2 Toque esta tecla para abrir la lista de
fuentes. (página 11)
Menú re- Lista Lista
Banda
cepción presint. PTY 4 m/M
Toque para sintonizar manualmente.
Mantenga pulsado para omitir frecuencias
3 Toque la banda deseada (“FM1”, continuamente.
“FM2”, “FM3”, “AM1”, o “AM2”). 5 ./>
Toque “Banda” nuevamente para cerrar la Toque para sintonizar automáticamente.
lista de bandas.
4 Procedimiento para sintonizar una 6 “Banda”
emisora. Toque para abrir la lista de bandas y
cambiar la banda.
Sintonización automática
Toque ./>. 7 “Menú recepción”
La búsqueda se detiene cuando la unidad Toque para abrir el menú recepción, que
recibe una emisora. Repita este contiene los siguientes elementos.
procedimiento hasta recibir la emisora • “Mono”: toque para activar el modo
deseada. monoaural si la recepción de FM no es
Sintonización manual buena. Para restaurar la recepción
Toque m/M repetidamente hasta que se estéreo, seleccione “DESACT.”.
reciba la frecuencia deseada. • “Local”: toque para sintonizar
Para omitir frecuencias continuamente, únicamente las emisoras con una señal
mantenga pulsado m/M. más intensa. Para sintonizar
normalmente, seleccione “DESACT.”.
15 Recepción de emisoras
almacenadas
C D
1 Seleccione la banda y, a continuación,
A Icono de fuente actual*1 toque “Lista presint.”.
B Nombre de banda, número de presintonía*2,
frecuencia/estado 2 Toque el número deseado (de “P1” a
C Nivel de volumen*3 “P6”).
D Estado de ajuste (EQ7, RBE)
*1 Aparece solamente cuando se muestran los
controles.
RDS
*2 Aparece solamente cuando se recibe la emisora
almacenada en la memoria.
*3 Cuando ATT está activado, aparece . Generalidades
Las emisoras de FM con servicio de Sistema de
datos de radio (RDS) envían información digital
Almacenamiento y recepción inaudible junto con la señal del programa de
radio habitual.
de emisoras
Elementos de pantalla
Precaución
Para sintonizar emisoras mientras maneja, utilice A
la función Memoria de la mejor sintonía (BTM)
para evitar accidentes. Lista fuentes ATT Arriba
Almacenamiento automático
— BTM
1 Toque “Lista fuentes” y, a
continuación, “Sintonizador”. Banda
Menú re- Lista Lista
cepción presint. PTY
Para cambiar la banda, toque “Banda” y, a
continuación, seleccione la banda deseada 10:00 AM
Selección de PTY
1 Durante la recepción de FM, toque
“Lista PTY”.
La lista PTY aparece si la estación está
transmitiendo datos de PTY.
Para desplazarse por la lista, toque v/V.
2 Toque el tipo de programa deseado.
La unidad busca una emisora que transmita el
tipo de programa seleccionado.
Para cerrar la lista PTY, toque “Lista PTY”.
Tipo de programas
“News” (Noticias), “Current Affairs”
(Temas de actualidad), “Information”
(Información), “Sport” (Deportes),
“Education” (Educación), “Drama” (Drama),
“Cultures” (Cultura), “Science” (Ciencias),
“Varied Speech” (Variados), “Pop Music”
(Música popular), “Rock Music” (Música
rock), “Easy Listening” (Pop maduro),
“Light Classics M” (Clásica ligera),
“Serious Classics” (Clásica seria), “Other
Music” (Otra música), “Weather & Metr” (El
Tiempo), “Finance” (Finanzas), “Children’s
Progs” (Programas infantiles), “Social
Affairs” (Temas de sociedad), “Religion”
(Religión), “Phone In” (Entrada de teléfono),
“Travel & Touring” (Viajes), “Leisure &
Hobby” (Ocio), “Jazz Music” (Música jazz),
“Country Music” (Música country),
“National Music” (Música nacional),
“Oldies Music” (Música de décadas pasadas),
“Folk Music” (Música folk),
“Documentary” (Documental) 17
Discos Controles de reproducción
Toque la pantalla si no aparecen los controles de
Reproducción de discos reproducción.
Común a todos los discos/formatos
Dependiendo del disco, es posible que algunas
operaciones sean diferentes o estén prohibidas. 1 2 3
Consulte el manual de instrucciones
suministrado con el disco. Lista fuentes ATT Arriba
MPEG-4
Menú reprod.
Lista
SHUF
Álbum
18 9 q;
6 “Menú reprod.”
Toque para abrir el menú de
9 q; reproducción, que contiene los siguientes
elementos.
Lista fuentes ATT Arriba
• “Repetir”/“Aleatoria” (página 23)
• “Nivel de Dolby D” (solamente
reproducción de VIDEO DVD)
(página 21)
• “Estéreo” (solamente reproducción de
Menú reprod.
VCD/CD/MP3/WMA/AAC)
ZAP Lista
SHUF (página 21)
Álbum
15
3 Toque las teclas numéricas para
seleccionar el elemento deseado y, a
B C continuación, “Enter”.
4 Siga las instrucciones del menú para
las operaciones interactivas.
D E F Para volver a la pantalla anterior, presione
O.
Lista fuentes ATT Arriba Para ocultar los controles, toque “Cerrar”.
Cambio de la contraseña
Desactive el control de bloqueo, luego actívelo
nuevamente con la nueva contraseña.
22
Las opciones de reproducción aleatoria o de
Reproducción repetida y modificación del orden de reproducción de cada
disco o formato se indican a continuación.
aleatoria
Disco/
Opciones
formato
MPEG-4 “DESACT.”: vuelve al modo
de reproducción normal.
1 Durante la reproducción, toque “Menú *2 “Título”: reproduce los
reprod.”, luego la casilla “Repetir” o capítulos del título actual en
“Aleatoria” repetidamente hasta que orden aleatorio.
aparezca la opción deseada.
“DESACT.”: vuelve al modo
Lista fuentes ATT Arriba *1 de reproducción normal.
“Disco”: reproduce las pistas
del disco actual en orden
aleatorio.
Capítulo DESACT. ACTIVAR “DESACT.”: vuelve al modo
Repetir Aleatoria Ajustar Nivel de Dolby D 0 de reproducción normal.
Control Menú reprod. “Álbum”: reproduce las pistas,
DVD SHUF
imágenes o archivos de video
del álbum (carpeta) actual en
Se inicia la reproducción repetida o aleatoria. orden aleatorio.
Para cerrar el menú de reproducción, toque
“Menú reprod.”. MPEG-4
25
3 Transferencia de pistas al dispositivo
Cómo disfrutar la música de USB con “Content Transfer”
A fin de agrupar las pistas por canal o ánimo,
acuerdo con su estado de es necesario que 12 TONE ANALYSIS, que
ánimo — SensMe™ se cargó en “Content Transfer”, analice los
patrones de sonido de las pistas.
Las funciones “canales SensMe™ ” y “ánimo Con el dispositivo USB conectado a la
SensMe™”, exclusivas de Sony, agrupan computadora, arrastre y suelte las pistas desde
automáticamente las pistas por canal o ánimo y Windows Explorer o iTunes, etc., a “Content
le permiten disfrutar intuitivamente de la música. Transfer”.
“Content Transfer” realizará tanto el análisis
como la transferencia de las pistas.
Antes de utilizar la función
SensMe™
A continuación aparece el procedimiento básico Content
Transfer
requerido para disfrutar la función SensMe™ en
la unidad.
1 Instalación de “SensMe™ Setup” y
“Content Transfer” en su computadora
Primero instale “SensMe™ Setup” y “Content
Transfer” desde el CD-ROM suministrado. 4 Conexión del dispositivo USB y cómo
disfrutar de la función SensMe™ en la
unidad
Conecte el dispositivo USB configurado.
SensMe™
Setup
Content
Transfer
Puede disfrutar de “canales SensMe™” o
“ánimo SensMe™” en esta unidad.
26
Registro de un dispositivo USB Reproducción de pistas en canales
con “SensMe™ Setup” — canales SensMe™
Es necesario registrar el dispositivo USB para “canales SensMe™” agrupan automáticamente
activar la función SensMe™ en la unidad. las pistas en los canales por sus sintonizaciones.
Puede seleccionar y reproducir un canal que se
Si el registro no se realiza junto con el ajusta a su estado de ánimo, actividad, etc.
procedimiento de instalación, siga los pasos a
continuación. 1 Conecte un dispositivo USB
configurado para la función
1 Inicie “SensMe™ Setup” en la SensMe™.
computadora.
2 Conecte un dispositivo USB a la
2 Toque “Lista fuentes” y, a
continuación, “SensMe™”.
computadora.
3 Realice el registro siguiendo las
3 Toque “canales”.
Aparece la lista de canales.
instrucciones en pantalla.
Sugerencia
Si conecta un dispositivo USB registrado que contiene
las pistas analizadas, el dispositivo USB nuevamente
Mezclar todo
puede no estar registrado.
Enérgica
Transferencia de pistas al
dispositivo USB con “Content Relajante ZAP
Transfer”
Para activar la función SensMe™ en esta unidad,
se deben analizar y transferir las pistas al 4 Toque v/V para desplazarse por la
dispositivo USB registrado, con “Content lista de canales.
Transfer”. La reproducción de la primera pista en el
1 Conecte el dispositivo USB registrado canal actual comienza desde la sección más
a la computadora. melódica o rítmica de la pista*.
* Podría no detectarse correctamente.
Para “WALKMAN”, conecte con el modo
MTP. 5 Toque el canal deseado.
Para dispositivos USB distintos a Comienza la reproducción de pistas en el
“WALKMAN”, conecte con el modo MSC. canal seleccionado.
“Content Transfer” se inicia Notas
automáticamente. • Dependiendo de la pista, podría no detectarse
Si aparece un mensaje, siga las instrucciones correctamente o podría agruparse en un canal no
en pantalla para continuar. adecuado para el ánimo de la pista.
• Si el dispositivo USB conectado contiene muchas
2 Arrastre y suelte las pistas desde pistas, “canales SensMe™” podría demorar en
Windows Explorer o iTunes, etc., a iniciarse, debido a la lectura de datos.
“Content Transfer”.
Sugerencia
Comienza el análisis y transferencia de pistas.
Las pistas se reproducen en orden aleatorio. El orden
Para obtener más información del variará en cada selección de canal.
funcionamiento, consulte la Ayuda de “Content
Transfer”. continúa en la página siguiente t
Nota
El análisis de pistas realizados por 12 TONE
ANALYSIS puede demorar, dependiendo del entorno
de la computadora.
Sugerencia
No solamente los archivos de audio sino también las
imágenes y los archivos de video se pueden transferir
con “Content Transfer”. Para obtener más información,
consulte la Ayuda de “Content Transfer”.
27
Lista de canales Controles e indicaciones durante la
x Recomendado, Mezclar todo
reproducción de “canales
SensMe™”
“Mañana” (5:00 AM – 9:59 AM)
“Día” (10:00 AM – 3:59 PM) A B C D E
“Tarde” (4:00 PM – 6:59 PM)
“Noche” (7:00 PM – 11:59 PM)
“Medianoche” (12:00 AM – 4:59 AM) Shuffle All
Reproduce las pistas recomendadas para cada
hora del día.
Ajuste el reloj (página 59) para el canal que se Enérgica
F G H
x Canales básicos
Reproduce las pistas de acuerdo con el tipo de A Para mostrar las teclas de control: “Lista
música. fuentes”, “ATT”, “Arriba”. (página 18)
B Para desplazarse por la lista y seleccionar otro
“Enérgica”: pistas efusivas. canal.
C Indica el canal actual.
“Relajante”: pistas lentas. D Indica la visualización de la ilustración del
“Suave”: pistas suaves, melancólicas. álbum*1.
E Indica el tiempo de reproducción
“Optimista”: pistas alegres para mejorar el transcurrido, nombre de pista y nombre de
estado de ánimo. artista.
F Para insertar una pausa/reanudar la
“Emocional”: pistas de balada.
reproducción después de una pausa.
“De salón”: pistas de salón. G Para omitir una pista.
H Para ingresar en el modo ZAPPIN.
“Baile”: pistas de ritmo y rap, ritmo y blues. (página 32)
“Extrema”: pistas de rock pesado. Durante la reproducción de ZAPPIN de
“canales SensMe™”, se reproducen las
secciones más melódicas o rítmicas*2 de las
x Canales en el automóvil pistas.
Reproduce las pistas que son adecuadas mientras *1 El tamaño recomendado es de 240 × 240 a 960 ×
maneja. 960 píxeles.
*2 Podría no detectarse correctamente.
“Autopista”: pistas veloces, efusivas.
“Conducción relajada”: pistas entonadas, de
balada curativa.
“Viaje de fin de semana”: pistas agradables,
llenas de vida y alegres.
“Recorrido nocturno”: pistas de jazz o piano
para adultos.
“Fiesta”: pistas rápidas y vivas.
“Desplazam.matutino”: pistas dinámicas y
llenas de vida.
“Rumbo a casa”: pistas cálidas y relajantes.
28
Controles e indicaciones durante la
Reproducción de pistas en el mapa reproducción de “ánimo SensMe™”
de ánimos — ánimo SensMe™
A B C D E
“ánimo SensMe™” distribuye las pistas como
puntos en un mapa de ánimos de dos ejes, basado
en las características de las pistas individuales.
Rápido
Ánimo
Al tocar el punto en el mapa de acuerdo con su
estado de ánimo, aparece un círculo alrededor del Tipo
punto tocado y se reproducen las pistas dentro de Triste Feliz
éste. Estilo
29
*1 Para reproducir videos desde un iPod con
Operaciones de iPod video, se requiere utilizar RC-202IPV.
*2 Podría no aparecer en el caso de un iPod touch
Para obtener más información sobre la o iPhone conectado, o cuando el iPod se
compatibilidad del iPod, consulte “Acerca de reprodujo por última vez utilizando el control
del pasajero.
iPod” en la página 64 o visite el sitio de soporte
técnico. 3 Ajuste el volumen en esta unidad.
30
Para reproducción de video
Ajuste del modo de
“DESACT.”: vuelve al modo de reproducción
reproducción normal.
“TRACK”: repite el video actual.
Puede ajustar uno de los siguientes modos de “RENTAL”/“TV SHOW”/“MUSIC VIDEO”/
reproducción. “VIDEO PLAYLIST”/“VIDEO
Para reproducción de audio PODCAST”*: repite el elemento actual del
modo de reproducción seleccionado.
“ALBUM”, “TRACK”, “GENRE”,
“PLAYLIST”, “ARTIST”, “MUSIC
PODCAST”* Las opciones de aleatoria son las siguientes.
31
Funciones útiles Selección de un tipo de archivo
File 01
File 06
32
2 Toque “ZAP” cuando se reproduce Realice esto Para
una pista que desea escuchar.
La pista que selecciona vuelve al modo de Recepción de radio:
reproducción normal desde el comienzo. buscar emisoras hacia atrás.
Para buscar nuevamente una pista en modo Dibuje una (Lo mismo que ..)
ZAPPIN, repita los pasos 1 y 2. línea horizontal Reproducción de DVD/
(de derecha a VCD:
En el caso de reproducción de izquierda) omitir un capítulo/pista hacia
“canales SensMe™” o “ánimo atrás.
SensMe™” (Lo mismo que ..)
Si ingresa en el modo ZAPPIN durante la
reproducción de “canales SensMe™” o “ánimo Reproducción de JPEG/
SensMe™”, se reproducen las secciones más Xvid/MPEG-4/audio:
melódicas o rítmicas* de las pistas. Para obtener omitir un archivo/pista hacia
más información sobre la función SensMe™, atrás.
consulte “Cómo disfrutar la música de acuerdo (Lo mismo que ..)
con su estado de ánimo — SensMe™” en la Recepción de radio:
página 26. recibir emisoras almacenadas
* Podría no detectarse correctamente. (ir hacia delante).
Sugerencias Dibuje una Reproducción de DVD/
• Puede cambiar la hora de reproducción (página 57), línea vertical VCD/Xvid/MPEG-4:
pero no se puede seleccionar el pasaje de la pista (hacia arriba) avanzar rápido el video.
que se reproducirá.
• Puede desactivar el sonido de pitido entre los Reproducción de JPEG/
pasajes de la pista (página 57). audio:
omitir un álbum (carpeta) hacia
adelante.
Uso del Comando por (Lo mismo que “Álbum” +.)
movimientos disponible Recepción de radio:
recibir emisoras almacenadas
Puede realizar operaciones frecuentemente (ir hacia atrás).
utilizadas dibujando la siguiente serie de Dibuje una Reproducción de DVD/
comandos en la pantalla de recepción/ línea vertical VCD/Xvid/MPEG-4:
reproducción. (hacia abajo) retroceder el video.
Realice esto Para Reproducción de JPEG/
audio:
Recepción de radio: omitir un álbum (carpeta) hacia
buscar emisoras hacia adelante. atrás.
Dibuje una (Lo mismo que >.) (Lo mismo que “Álbum” –.)
línea horizontal Reproducción de DVD/
(de izquierda a VCD: Para ver las instrucciones sobre
derecha) omitir un capítulo/pista hacia Comando por movimientos
adelante. disponible
(Lo mismo que >.) Toque cuando aparezca en el extremo
Reproducción de JPEG/ superior derecho de la pantalla.
Xvid/MPEG-4/audio:
omitir un archivo/pista hacia
adelante.
(Lo mismo que >.)
33
3 Llamada de manos libres/transmisión
Llamada de manos libres y de audio
transmisión de audio — Bluetooth A través de esta unidad, puede realizar/recibir
una llamada de manos libres o escuchar audio.
(sólo el modelo XAV-62BT)
Llamando
Name
0123456789
Llamando
34
Ninguno: la señal de Bluetooth está Búsqueda desde esta unidad
desactivada.
Encendido: la señal de Bluetooth Compruebe con anticipación que el otro
está activada. dispositivo Bluetooth sea detectable (ajustado
para permitir su búsqueda).
Ninguno: no hay ningún dispositivo
conectado para la transmisión de 1 Seleccione la fuente de Bluetooth.
audio. Para seleccionar el Teléfono Bluetooth,
Parpadeando: la conexión está en presione (TOP) y, a continuación, toque
progreso. “Teléfono BT” en el menú superior.
Encendido: un dispositivo está Para seleccionar Audio Bluetooth, toque
conectado. “Lista fuentes” y, a continuación, “Audio
BT”.
Ninguno: no hay ningún teléfono
celular conectado para las llamadas de 2 Toque “Menú BT”.
manos libres. En el caso de Audio Bluetooth, toque “Menú
Parpadeando: la conexión está en reprod.” y, a continuación, “Menú BT”.
progreso. Aparece el menú de ajuste de Bluetooth.
Encendido: un teléfono celular está Atrás ATT Arriba
conectado. Menú BT
Lista de dispositivos
35
Notas
Búsqueda desde el dispositivo • Mientras se conecta a un dispositivo Bluetooth, esta
Bluetooth unidad no puede ser detectada desde otro
dispositivo. Para permitir la detección, desconecte la
A continuación se explica el procedimiento para conexión actual.
buscar esta unidad desde el otro dispositivo • Dependiendo del dispositivo, la búsqueda desde
esta unidad podría no ser posible. En este caso,
Bluetooth.
busque esta unidad desde el otro dispositivo.
1 Seleccione la fuente de Bluetooth. • Si busca desde esta unidad y otro dispositivo al
mismo tiempo, esta unidad no reconocerá al otro
Para seleccionar el Teléfono Bluetooth,
dispositivo.
presione (TOP) y, a continuación, toque • La búsqueda o conexión podría tardar un tiempo.
“Teléfono BT” en el menú superior. • Dependiendo del dispositivo, es posible que
Para seleccionar Audio Bluetooth, toque aparezca la visualización de la confirmación de
“Lista fuentes” y, a continuación, “Audio conexión antes de ingresar la clave.
BT”. • El límite de tiempo para ingresar la clave difiere
según el dispositivo.
2 Toque “Menú BT”. • Esta unidad no puede conectarse a un dispositivo
En el caso de Audio Bluetooth, toque “Menú que sólo admite HSP (Head Set Profile).
reprod.” y, a continuación, “Menú BT”.
Aparece el menú de ajuste de Bluetooth.
3 Toque “Señal” y, a continuación, “Sí” Conexión
para ajustar la “Señal” en “ACTIV.”.
La señal de Bluetooth de esta unidad está Cuando el encendido está activado con la señal
activada. de Bluetooth activada, esta unidad busca el
último dispositivo Bluetooth conectado y la
4 Toque “Detectable” para ajustar en conexión se realiza en forma automática, dentro
“Mostrar”. de lo posible.
Esta unidad está lista para ser detectada por el
otro dispositivo Bluetooth. En este capítulo se explica cómo conectarse
manualmente a los dispositivos Bluetooth
5 Comience a buscar esta unidad desde registrados.
el otro dispositivo Bluetooth.
Una vez finalizada la búsqueda, esta unidad Antes de comenzar, asegúrese de activar la señal
aparece como “Sony Automotive”* en la lista de Bluetooth tanto en esta unidad (página 44)
del otro dispositivo Bluetooth. como en el otro dispositivo Bluetooth.
* Se puede cambiar en el ajuste de Bluetooth
(página 44). 1 Seleccione la fuente de Bluetooth.
Para seleccionar el Teléfono Bluetooth,
presione (TOP) y, a continuación, toque
“Teléfono BT” en el menú superior.
DR-BT30Q Para seleccionar Audio Bluetooth, toque
Sony
Automotive “Lista fuentes” y, a continuación, “Audio
XXXXXXX BT”.
2 Toque “Menú BT”.
En el caso de Audio Bluetooth, toque “Menú
Una vez realizada la operación requerida en el reprod.” y, a continuación, “Menú BT”.
otro dispositivo Bluetooth, aparece la Aparece el menú de ajuste de Bluetooth.
visualización de la clave ingresada en esta
unidad.
3 Toque “Lista de dispositivos”.
Aparece la lista de dispositivos Bluetooth
6 Toque las teclas numéricas para registrados.
ingresar la clave y, a continuación, Para desplazarse por la lista, toque v/V.
“OK”.
La asociación finaliza y esta unidad se
4 Toque el dispositivo que se conectará.
conecta al otro dispositivo Bluetooth.
Cuando la conexión se efectúa correctamente,
en la parte inferior de la pantalla aparece o
.
36
5 Seleccione el tipo de conexión.
Toque “Conexión manos libres” para utilizar Llamada de manos libres
para llamadas de manos libres.
Toque “Conexión audio” para utilizar para Una vez que la unidad se conecta al teléfono
transmisión de audio. celular, cuando la hace funcionar, puede realizar/
La conexión se completó. recibir llamadas de manos libres.
Cuando la conexión se efectúa correctamente,
en la parte inferior de la pantalla aparece o
. Realización de llamadas
En la lista de dispositivos, el dispositivo
conectado se indica mediante el icono al Mediante la marcación de un número
comienzo de su nombre. de teléfono
1 Presione (TOP) y, a continuación,
Para conectarse desde el otro toque “Teléfono BT” en el menú
dispositivo Bluetooth superior.
Haga funcionar el otro dispositivo Bluetooth para Aparece la pantalla de Teléfono Bluetooth.
conectarse a esta unidad.
Cuando la conexión se efectúa correctamente, en Atrás ATT Menú BT Arriba
la parte inferior de la pantalla aparece o . Marcación predefinida
Marcar
Llamando
Llamada entrante...
Para enviar tonos DTMF
Name
0123456789
(Multifrecuencia de doble tono)
Toque “Abrir teclado”, luego las teclas numéricas
requeridas.
Llamada entrante...
Para transferir la llamada actual al
teléfono celular
Toque “Manos libres DESAC.”.
Para transferir nuevamente a la llamada de manos
Para contestar la llamada libres, toque “Manos libres ACT.”.
Toque . Nota
Dependiendo del teléfono celular, la conexión podría
cortarse cuando se intenta la transferencia de
Para ajustar el volumen del tono de llamadas.
llamada
Gire el selector de control del volumen cuando
reciba una llamada. Para ajustar el volumen para la otra
El nivel de volumen del tono de llamada se persona
almacenará en la memoria, independientemente 1 Toque “Menú BT”.
del nivel de volumen normal.
2 Toque v/V para desplazarse y, a
continuación, toque “Sens.
Para rechazar una llamada Micrófono”.
Toque .
Nota
3 Toque –/+ para ajustar el nivel.
El tono de llamada y la voz de la persona que habla se El nivel se puede ajustar en pasos individuales
reciben solamente desde los altavoces frontales. entre –2 y +2.
Sugerencias 4 Toque “Atrás” repetidamente para
• Puede ajustar para contestar automáticamente una volver a las pantallas anteriores.
llamada (página 44).
• Puede ajustar para usar el tono de llamada del
teléfono celular o de esta unidad (página 44).
Para finalizar una llamada
Toque .
superior. Vacío
Aparece la pantalla de Teléfono Bluetooth.
Vacío
40
Para agregar un contacto desde el 5 Seleccione el contacto deseado.
historial de llamadas 1 En la lista de iniciales, toque la inicial del
1 Presione (TOP) y, a continuación, contacto.
toque “Teléfono BT” en el menú 2 En la lista de nombres, toque el nombre del
superior. contacto.
Aparece la pantalla de Teléfono Bluetooth. 3 En la lista de números, toque el número de
2 Toque “MENÚ llamada”, luego teléfono.
“Llamada reciente”. Aparece la pantalla de confirmación de
Aparece la lista del historial de llamadas. contacto.
Para desplazarse por la lista, toque v/V.
3 Toque el elemento que agregará a la Para llamar al contacto
agenda telefónica. Toque el número de teléfono para llamar y, a
Aparece la pantalla de confirmación de continuación, toque “Sí” para confirmar.
contacto.
4 Toque “Guardar en agenda”. Para agregar el contacto a la agenda
Aparece la pantalla de ingreso de nombre. telefónica de esta unidad
5 Toque las teclas de caracteres para Toque “Guardar en agenda” y, a continuación,
ingresar el nombre y, a continuación, toque “Sí” para confirmar.
toque “OK”.
Para obtener más información sobre el uso del
teclado, consulte “Acerca del teclado para
Eliminación de datos de la agenda
editar el nombre” en la página 42. telefónica
El contacto se agrega a la agenda telefónica.
Para eliminar todos los datos de la
Exploración de una agenda agenda telefónica de esta unidad
telefónica en un teléfono celular 1 Presione (TOP) y, a continuación,
toque “Teléfono BT” en el menú
Si el teléfono celular conectado admite PBAP superior.
(Phone Book Access Profile), puede explorar los Aparece la pantalla de Teléfono Bluetooth.
datos de la agenda telefónica desde esta unidad.
También puede realizar una llamada a un 2 Toque “MENÚ llamada”, luego
contacto o agregar el contacto a la agenda “Agenda telefónica”.
telefónica de esta unidad. Aparece la agenda telefónica.
Personalización de la curva de un
ecualizador — Sintonía EQ7
La curva “Personal” de EQ7 permite ajustar el
ecualizador de manera personalizada. Puede
ajustar el nivel de 7 bandas diferentes: 62 Hz,
157 Hz, 396 Hz, 1 kHz, 2,5 kHz, 6,3 kHz y
16 kHz.
1 Durante la recepción/reproducción,
toque “Lista fuentes” y, a
continuación, .
2 Toque “Sonido” y, a continuación,
“EQ7”.
3 Toque “Personal” y, a continuación,
“Entonar”.
Aparece la pantalla de sintonización.
0 0 0 0 0 0 0
62 Hz 157 Hz 396 Hz 1 kHz 2.5 kHz 6.3 kHz 16 kHz
Restablecer OK
45
4 Toque +/– de cada frecuencia para Para volver a la pantalla anterior, toque “Atrás”.
ajustar sus niveles.
El nivel se puede ajustar en pasos individuales
entre –8 y +8.
Para restaurar la curva de un ecualizador
Optimización del sonido para la
ajustada de fábrica, toque “Restablecer”. posición de escucha
5 Toque “OK”. — Alineación de tiempo
Se completó la configuración. inteligente
Para volver a la pantalla anterior, toque “Atrás”.
Sugerencia La unidad puede cambiar la localización del
También es posible ajustar otros tipos de ecualizador. sonido demorando la salida de sonido de cada
altavoz para adecuarse a su posición de escucha y
simular un campo de sonido natural con la
Ajuste de las características del sensación de estar en el centro de él
independientemente de dónde se encuentre en el
sonido automóvil.
Las opciones para “Posición escuchar” se
El balance de sonido entre los altavoces indican a continuación.
izquierdos y derechos (“Balance”) y los
altavoces frontales y posteriores (“Equilibrio”) se “Delant. I” (1): frontal
pueden ajustar según su preferencia. También izquierdo
puede ajustar el nivel de volumen del altavoz “Delant. D” (2): frontal
subgraves. derecho
1 Durante la recepción/reproducción, “Delant.” (3): frontal 132
toque “Lista fuentes” y, a central
continuación, . “Todo” (4): en el centro del 4
automóvil
2 Toque “Sonido”.
Aparece el menú de ajuste de sonido. “Personaliz.”: posición
calibrada con precisión
3 Toque “Balance/Equilibrio”. (página 47)
Aparece la pantalla de ajuste. “DESACT.”: no hay ninguna
posición ajustada
Atrás ATT Arriba
Ajuste posición
Utilización de los altavoces
posteriores como un altavoz
100 100 100 100 100
subgraves — Mejorador de graves
posteriores
(cm)
48
4 Toque “Cálido”, “Normal”, o “Frío”
Ajuste de la imagen para seleccionar “Tono color”.
— Picture EQ 5 Toque +/– de “Brillo” y “Color” para
ajustar sus niveles.
Puede ajustar la imagen para que se adecúe al Para volver a la pantalla anterior, toque “Atrás”.
brillo interior del automóvil.
Las opciones disponibles se muestran debajo. Nota
La imagen de la vista cámara posterior no se puede
“Dinámica”: imagen viva con brillo, colores ajustar.
nítidos.
“Estándar”: imagen estándar.
“Teatro”: da brillo al monitor, adecuado para Selección de la relación de
películas con iluminación oscura.
“Sepia”: aplica un tono sepia a la imagen. aspecto
“Personalizada 1”, “Personalizada 2”:
ajustes definibles por el usuario (página 49). Puede cambiar la relación de aspecto de la
pantalla.
1 Durante la reproducción de video/ Las opciones disponibles se muestran debajo.
imagen, toque “Lista fuentes” y, a
continuación, . “Normal”: imagen con
2 Toque “Pantalla”. relación de aspecto 4:3 (imagen
Aparece el menú de ajuste de pantalla. normal).
3 Toque “Picture EQ”.
Se muestran las opciones. “Ancho”: imagen con relación
de aspecto 4:3 ampliada hacia
4 Toque la opción deseada. los bordes izquierdo y derecho
Para volver a la pantalla anterior, toque “Atrás”. de la pantalla, con partes
sobresalientes del corte
Nota superior e inferior para
Este ajuste se encuentra disponible solamente
completar la pantalla.
cuando el freno de mano está accionado.
“Completa”: imagen con
relación de aspecto de 16:9.
Personalización de la imagen
Las opciones “Personalizada 1” y “Personalizada
2” de Picture EQ permiten realizar su propio “Zoom”: imagen con relación
ajuste de la imagen, mediante la definición de los de aspecto 4:3 ampliada hacia
tonos de la imagen. los bordes izquierdo y derecho
de la pantalla.
1 Durante la reproducción de video/
imagen, toque “Lista fuentes” y, a 1 Durante la reproducción de video/
continuación, . imagen, toque “Lista fuentes” y, a
2 Toque “Pantalla” y, a continuación, continuación, .
“Picture EQ”. 2 Toque “Pantalla”.
3 Toque “Personalizada 1” o Aparece el menú de ajuste de pantalla.
“Personalizada 2” y, a continuación, 3 Toque “Aspecto”.
“Ajuste personalizado”. Se muestran las opciones.
Aparece la pantalla de ajuste.
4 Toque la opción deseada.
Atrás ATT Arriba Para volver a la pantalla anterior, toque “Atrás”.
Picture EQ: ajuste personalizado
Notas
• Este ajuste se encuentra disponible solamente
Cálido
cuando el freno de mano está accionado.
Normal • La relación de aspecto de la pantalla de la vista
Frío
cámara posterior no se puede cambiar.
49
Ajustes Operación básica de ajustes
El menú de ajustes incluye las siguientes Los elementos del menú se pueden ajustar
categorías. mediante el procedimiento siguiente.
• “General”: ajustes generales (página 51) Por ejemplo, si desea configurar la demostración:
• “Sonido”: ajustes de sonido (página 53)
• “Pantalla”: ajustes de pantalla (página 55) 1 Cuando no esté seleccionada ninguna
• “Visual”: DVD y otros ajustes de fuente, toque “Lista fuentes” y, a
reproducción (página 56) continuación, .
(Sólo para el modelo XAV-62BT: En el menú
superior, toque .)
Aparece el menú de ajuste.
CT DESAC. / ACTIV.
2 Toque “Pantalla”.
Aparece la pantalla de ajuste de pantalla.
Selección de pantalla
Picture EQ Dinámica
50
Ajustes generales
Toque c “General” c el elemento deseado c la opción deseada. Para obtener más información
sobre este procedimiento, consulte “Operación básica de ajustes” en la página 50.
Para obtener más información, consulte las páginas que se indican a continuación. “z” indica el ajuste
predeterminado.
Estado de la
Elemento Opción Utilidad
unidad
Control de seguridad – –
Cualquier estado
(página 59)
Ajuste del reloj (página 59) – – Cualquier estado
APAGADO automático No (z) Permite desactivar la
Este ajuste permite que la función desconexión
unidad se apague de forma automático.
automática cuando no se Cualquier estado
selecciona ninguna fuente. 30 segundos, Permite seleccionar el
30 minutos, tiempo deseado.
60 minutos
51
Estado de la
Elemento Opción Utilidad
unidad
52
Ajustes de sonido
Toque c “Sonido” c el elemento deseado c la opción deseada. Para obtener más información sobre
este procedimiento, consulte “Operación básica de ajustes” en la página 50.
Para obtener más información, consulte las páginas que se indican a continuación. “z” indica el ajuste
predeterminado.
Estado de la
Elemento Opción Utilidad
unidad
53
Estado de la
Elemento Opción Utilidad
unidad
54
Ajustes de pantalla
Toque c “Pantalla” c el elemento deseado c la opción deseada. Para obtener más información
sobre este procedimiento, consulte “Operación básica de ajustes” en la página 50.
Para obtener más información, consulte las páginas que se indican a continuación. “z” indica el ajuste
predeterminado.
Estado de la
Elemento Opción Utilidad
unidad
Selección de pantalla – –
Cualquier estado
(página 48)
Picture EQ* (página 49) Dinámica (z), Permite seleccionar la
Estándar, calidad de la imagen.
Teatro, Sepia Durante la
Personalizada
reproducción de
Permite personalizar la
1, video/imágenes
calidad de la imagen.
Personalizada
2
* Este ajuste se encuentra disponible solamente cuando el freno de mano está accionado.
55
DVD y otros ajustes de reproducción
Toque c “Visual” c el elemento deseado c la opción deseada. Para obtener más información sobre
este procedimiento, consulte “Operación básica de ajustes” en la página 50.
Para obtener más información, consulte las páginas que se indican a continuación. “z” indica el ajuste
predeterminado.
Estado de la
Elemento Opción Utilidad
unidad
56
Estado de la
Elemento Opción Utilidad
unidad
57
Estado de la
Elemento Opción Utilidad
unidad
Nota
Si el control de bloqueo está activado, la función de reanudación de la reproducción no estará disponible. En este
caso, la reproducción se reanudará desde el principio del disco cuando éste se inserte.
58
Ajuste del código de seguridad Ajuste del reloj
Esta unidad posee una función de seguridad para El reloj utiliza un sistema de 12 horas.
disuadir a los ladrones. Ingrese un número de 4
dígitos como código de seguridad. 1 Toque “Lista fuentes” y, a
Una vez activada la función de seguridad, es continuación, .
necesario ingresar el código de seguridad para Aparece el menú de ajuste general. Si esto no
encender la unidad después de reinstalarla en sucede, toque “General”.
otro automóvil o después de cambiar la batería. 2 Toque “Ajuste del reloj”.
Aparece la pantalla de ajuste.
Activación de la función de 3 Ajuste la hora y los minutos.
seguridad Por ejemplo, para ajustar 8:30, toque “0830”.
1 Toque “Lista fuentes” y, a 4 Toque “AM” o “PM”.
continuación, . 5 Toque “OK”.
Aparece el menú de ajuste general. Si esto no Se completó la configuración.
sucede, toque “General”.
Para eliminar un número ingresado, toque
2 Toque “Control de seguridad”. “Borrar”.
Aparece la pantalla de ajuste de código de Para volver a la pantalla anterior, toque “Atrás”.
seguridad.
3 Toque las teclas numéricas para
ingresar el código de seguridad y, a
continuación, toque “OK”.
4 Para confirmar, toque las teclas
numéricas para volver a ingresar el
código de seguridad y, a continuación,
toque “OK”.
Se completó la configuración.
Para eliminar un número ingresado, toque
“Borrar”.
Para volver a la pantalla anterior, toque “Atrás”.
Cuando enciende la unidad después de
reinstalarla en otro automóvil o de cambiar la
batería, aparece la indicación de ingreso de 4
dígitos. Toque las teclas numéricas para ingresar
el código de seguridad.
Desactivación de la función de
seguridad
1 Siga los pasos 1 a 2 arriba.
Aparece la pantalla de desbloqueo de
seguridad.
2 Toque las teclas numéricas para ingresar el
código de seguridad.
Aparece “Desbloqueado” y la función de
seguridad se desactiva.
59
Ajuste del tipo de dispositivo
Uso de equipo opcional Al ajustar el tipo (video o audio) de cada
dispositivo conectado, la pantalla de fondo se
Equipo auxiliar de audio/video puede cambiar según corresponda.
60
1 Toque “Lista fuentes” y, a
continuación, . Información complementaria
Aparece el menú de ajuste general. Si esto no
sucede, toque “General”. Precauciones
2 Toque v/V para desplazarse y, a
• Primero deje que la unidad se enfríe si el
continuación, toque “Ajuste de la vista
automóvil ha estado estacionado directamente
cámara posterior”. bajo el sol.
Aparecen los elementos del ajuste. • La antena motorizada se extiende
automáticamente.
Atrás Marcador
Edición de líneas
1 Toque “Ed. línea”.
Atrás
Edición 1
1
• No presione el panel LCD, puesto que al hacerlo
Edición 2
2 podría distorsionar la imagen o provocar un
funcionamiento incorrecto (es decir, la imagen
Edición 3
3 podría quedar poco clara o bien se podría dañar el
panel LCD).
Apague el motor dejando la llave en posición “IGN” Restablecer • Toque solamente con el dedo, puesto que se podría
dañar o quebrar el panel LCD.
• Limpie el panel LCD con un paño suave seco. No
2 Seleccione la línea que se editará. utilice solventes como bencina, diluyentes,
Toque “Edición 1”, “Edición 2” o “Edición 3” productos de limpieza comerciales ni aerosoles
correspondiente a la línea que se editará. antiestáticos.
• No use esta unidad fuera del rango de temperatura
3 Edite la línea. de 5 a 45 °C.
Para aumentar la longitud, toque B b. • Si el automóvil se estacionó en un lugar frío o de
Para reducir la longitud, toque bB. mucho calor, la imagen podría no ser nítida. Sin
Para ajustar la posición, toque V o v. embargo, el monitor no está dañado y la imagen
Para restaurar el ajuste predeterminado, toque volverá a ser clara después de que la temperatura
“Restablecer”. en el automóvil vuelva a la normalidad.
Para volver a la pantalla anterior, toque “Atrás”.
continúa en la página siguiente t
61
• Podrían aparecer algunos puntos azules, rojos o • La unidad es compatible con los siguientes
verdes estacionarios en el monitor. Estos se estándares.
denominan “puntos brillantes” y pueden Para DATA CD
producirse con cualquier LCD. El LCD está – Formato ISO 9660 de nivel 1 ó 2, Joliet/Romeo
fabricado con precisión, con más de 99,99% de en formato de expansión
sus segmentos funcionales. Sin embargo, es – Multi Session
posible que un pequeño porcentaje (normalmente Para DATA DVD
0,01%) de los segmentos no se encienda – Formato UDF Bridge (una combinación de UDF
correctamente. Esto, sin embargo, no interferirá e ISO 9660)
con la visión. – Multi Border
• Cantidad máxima de:
– carpetas (álbumes): 256 (incluida carpeta raíz y
Notas sobre los discos carpetas vacías).
– archivos (pistas/imágenes/videos) y carpetas
• No exponga los discos a la luz solar directa ni a incluidas en un disco: 2.000 (si los nombres de
fuentes de calor como ductos de aire caliente ni los una carpeta/archivo tienen muchos caracteres,
deje en un automóvil estacionado directamente este número podría llegar a ser menos de 2.000).
bajo el sol. – caracteres que se pueden visualizar en el nombre
• Antes de reproducir un disco, de una carpeta/archivo: 64 (Joliet/Romeo)
límpielo con un paño desde el
centro hacia afuera. No utilice
solventes como bencina, Notas sobre la finalización de los
diluyentes, productos de discos
limpieza comerciales. Los siguientes tipos de discos se deben finalizar
• Esta unidad se diseñó para antes de poder reproducirse en esta unidad.
reproducir discos que cumplen • DVD-R/DVD-R DL (en modo video/modo VR)
con el estándar Compact Disc • DVD-RW en modo video
(CD). Los DualDiscs y algunos de discos de • DVD+R/DVD+R DL
música codificado con tecnologías de protección • CD-R
de derechos de autor no cumplen con el estándar • CD-RW
Compact Disc (CD), por lo tanto, no pueden Los siguientes tipos de discos se pueden reproducir
reproducirse en esta unidad. sin necesidad de que se finalicen.
• Discos que esta unidad NO PUEDE • DVD+RW – finalizado automáticamente.
reproducir • DVD-RW en modo VR – la finalización no es
– Discos con etiquetas, autoadhesivos, cinta necesaria.
adhesiva o papel pegado. Si lo hace, se podría
producir un funcionamiento incorrecto o bien se Para obtener más información, consulte el manual
podría estropear el disco. suministrado con el disco.
– Discos con formas no estándar (por ejemplo,
corazón, cuadrado, estrella). Si lo intenta, puede Notas sobre los CD Multi Session y
dañar la unidad. los DVD Multi Border
– Discos de 8 cm. En esta unidad se pueden reproducir CD Multi
Session y DVD Multi Border en las siguientes
Nota sobre operaciones de circunstancias. Tenga en cuenta que la sesión debe
reproducción de discos DVD y VCD haberse cerrado y el disco debe estar finalizado.
Es posible que ciertas operaciones de reproducción • Si en la primera sesión se grabó un CD-DA (Audio
de discos DVD y VCD estén expresamente digital de disco compacto):
determinadas por los productores de software. La unidad identifica el disco como un CD-DA y
Puesto que esta unidad reproduce discos DVD y sólo se reproduce el contenido CD-DA de la
VCD en función del contenido diseñado por los primera sesión, incluso si las demás sesiones
productores de software, ciertas funciones de incluyen archivos en otro formato (como MP3).
reproducción pueden no estar disponibles. Consulte • Si un CD-DA se grabó en cualquier otra sesión
también las instrucciones suministradas con los diferente de la primera:
discos DVD o VCD. La unidad identifica el disco como un DATA CD o
DATA DVD y omite la reproducción de todas las
sesiones de CD-DA.
Notas sobre los DATA CD y DATA • Cuando se graba un MP3/WMA/AAC/JPEG/
DVD Xvid/MPEG-4:
• Es posible que algunos DATA CD o DATA DVD Sólo se reproducen las sesiones que contienen el
no puedan reproducirse en esta unidad (según el tipo de archivo seleccionado (audio/video/
equipo utilizado para su grabación, o el estado del imagen)* (si existe un CD-DA u otros datos en
disco). otras sesiones, serán omitidos).
• Para poder reproducir algunos discos, es necesario
que estén finalizados (página 62). * Para obtener más información sobre cómo
62 seleccionar el tipo de archivo, consulte página 32.
Nota sobre los archivos WMA
Orden de reproducción de los Los siguientes archivos WMA no se pueden
archivos MP3/WMA/AAC/JPEG/ reproducir en esta unidad.
– archivos de compresión sin pérdidas
Xvid/MPEG-4 – archivos protegidos por derechos de autor
MP3/WMA/AAC/ Carpeta
JPEG/Xvid/ (álbum)
MPEG-4 Acerca de los archivos AAC
Archivo MP3/
WMA/AAC/ • La etiqueta AAC tiene 126 caracteres.
JPEG/Xvid/ • Al asignar un nombre a un archivo AAC,
MPEG-4 (pista/ asegúrese de agregar la extensión “.m4a” al
imagen/video)
nombre del archivo.
63
Sobre la comunicación Bluetooth
Acerca de iPod • La tecnología inalámbrica Bluetooth funciona
dentro de un rango de unos 10 m.
• Puede conectarse a los siguientes modelos de
El rango máximo de comunicación puede variar
iPod. Actualice sus dispositivos iPod a la última
dependiendo de los obstáculos (persona, metal,
versión de software antes de utilizarlos.
muro, etc.) o del entorno electromagnético.
Made for • Las siguientes condiciones pueden afectar la
– iPod touch (4ª generación) sensibilidad de la comunicación Bluetooth.
– iPod touch (3ª generación) – Existe un obstáculo como una persona, un metal
– iPod touch (2ª generación) o un muro entre esta unidad y el dispositivo
– iPod touch (1ª generación) Bluetooth.
– iPod classic – Cerca de esta unidad se está utilizando un
– iPod con video* dispositivo que usa una frecuencia de 2,4 GHz,
– iPod nano (6ª generación) como un dispositivo de LAN inalámbrica, un
– iPod nano (5ª generación) teléfono inalámbrico o un horno microondas.
– iPod nano (4ª generación) • Dado que los dispositivos Bluetooth y la LAN
– iPod nano (3ª generación) inalámbrica (IEEE802.11b/g) utilizan la misma
– iPod nano (2ª generación) frecuencia, podría producirse interferencia de
– iPod nano (1ª generación)* microondas y traducirse en deterioro de la
– iPhone 4 velocidad de comunicación, en ruido o en una
– iPhone 3GS conexión inválida si esta unidad se utiliza cerca de
– iPhone 3G un dispositivo de LAN inalámbrica. En dichos
– iPhone casos, realice lo siguiente.
* El control del pasajero no está disponible para – Use esta unidad al menos a 10 m del dispositivo
iPod nano (1a generación) ni para iPod con video. de LAN inalámbrica.
– Si esta unidad se usa a menos de 10 m de un
• “Made for iPod” y “Made for iPhone” indican que dispositivo de LAN inalámbrica, apague el
un accesorio electrónico se diseñó para conectarse dispositivo de LAN inalámbrica.
específicamente a los dispositivos iPod y iPhone – Instale esta unidad y el dispositivo Bluetooth lo
respectivamente, y que el fabricante obtuvo la más cerca posible uno del otro.
certificación necesaria para que cumpla con los • Las microondas emitidas desde un dispositivo
estándares de rendimiento de Apple. Apple no es Bluetooth pueden afectar el funcionamiento de los
responsable del funcionamiento de este dispositivo dispositivos médicos electrónicos. Apague esta
o de su cumplimiento con los estándares de unidad y los otros dispositivos Bluetooth en las
seguridad y regulatorios. Tenga en cuenta que el siguientes ubicaciones, puesto que podrían causar
uso de este accesorio con el iPod o el iPhone un accidente.
puede afectar al rendimiento inalámbrico. – cuando existan gases inflamables presentes, en
hospitales, trenes, aviones o estaciones de
petróleo
Acerca de la función Bluetooth – cerca de puertas automáticas o de una alarma de
La siguiente información corresponde sólo al incendio
modelo XAV-62BT. • Esta unidad admite capacidades de seguridad que
¿Qué es la tecnología Bluetooth? cumplen con el estándar Bluetooth para
• La tecnología inalámbrica Bluetooth es una proporcionar una conexión segura cuando se
tecnología inalámbrica de alcance reducido que utiliza la tecnología inalámbrica Bluetooth, pero la
permite la comunicación de datos en forma seguridad podría no se suficiente, según el ajuste.
inalámbrica entre dispositivos digitales, como un Esté atento cuando se comunique utilizando
teléfono celular y un auricular. La tecnología tecnología inalámbrica Bluetooth.
inalámbrica Bluetooth funciona dentro de un • No somos responsables de ningún modo por
rango de unos 10 m. La conexión de dos filtración de información durante la comunicación
dispositivos es común, pero algunos dispositivos Bluetooth.
se pueden conectar a varios dispositivos al mismo • No se puede garantizar la conexión con todos los
tiempo. dispositivos Bluetooth.
• No es necesario utilizar un cable para realizar la – Un dispositivo que cuente con función Bluetooth
conexión, porque la tecnología Bluetooth es debe cumplir con el estándar Bluetooth
inalámbrica, tampoco es necesario que los especificado por Bluetooth SIG y ser
dispositivos estén enfrentándose, como es el caso autenticado.
de la tecnología infrarroja. Por ejemplo, puede – Incluso si el dispositivo conectado se ajusta al
usar un dispositivo de estos en un bolso o en un estándar Bluetooth antes mencionado, algunos
bolsillo. dispositivos podrían no conectarse ni funcionar
• La tecnología Bluetooth es un estándar correctamente, dependiendo de las
internacional admitido por millones de empresas características o especificaciones del dispositivo.
en todo el mundo y empleado por diversas
64 empresas a nivel mundial.
– Al hablar por teléfono con manos libres, podría Sustitución del fusible
producirse ruido, dependiendo del dispositivo o Al sustituir el fusible, asegúrese
entorno de comunicación. de utilizar uno cuyo amperaje
• Dependiendo del dispositivo conectado, podría coincida con el especificado en
requerirse un tiempo para comenzar la el original. Si el fusible se
comunicación. funde, verifique la conexión de
Otros alimentación y sustitúyalo. Si
• El uso del dispositivo Bluetooth podría no vuelve a fundirse después de
funcionar en teléfonos celulares, dependiendo de sustituirlo, es posible que exista
las condiciones de las ondas de radio y de la alguna falla de funcionamiento Fusible (10A)
interno. En tal caso, póngase en
ubicación donde se utiliza el equipo.
contacto con el distribuidor
• Si siente molestias después de usar el dispositivo
Bluetooth, detenga de inmediato el uso de éste. En Sony más cercano.
caso de que el problema persista, consulte con el
distribuidor Sony más cercano.
Extracción de la unidad
Si tiene dudas o problemas con respecto a la unidad
que no se cubren en este Manual de instrucciones, 1 Inserte las dos llaves de liberación
consulte con el distribuidor Sony más cercano. simultáneamente hasta oír un clic.
Mantenimiento
Sustitución de la pila de litio del
control remoto
Bajo condiciones normales, la batería durará
aproximadamente 1 año. (La vida en servicio podría
ser menor, según las condiciones de uso.) El gancho debe
mirar hacia
El alcance del control remoto disminuye a medida adentro.
que se agota la pila. Sustitúyala por una pila de litio
CR2025 nueva. El uso de cualquier otra pila podría
provocar un incendio o una explosión.
Lado + hacia
arriba 2 Tire de las llaves de liberación para
extraer la unidad.
c
ADVERTENCIA
La pila puede explotar si no se emplea
adecuadamente.
No recargue la pila; tampoco la desmonte ni
la arroje al fuego.
65
*1 Corresponde sólo al modelo XAV-62BT.
Especificaciones *2 El rango real variará dependiendo de factores
como obstáculos entre los dispositivos, campos
magnéticos alrededor de un horno microondas,
Monitor electricidad estática, sensibilidad de recepción,
Tipo de pantalla: monitor color LCD ancho rendimiento de la antena, sistema operativo,
Dimensiones: 6,1 pulg aplicación de software, etc.
Sistema: matriz activa TFT *3 Los perfiles del estándar Bluetooth indican el
Cantidad de píxeles: objetivo de la comunicación Bluetooth entre
1 152 000 píxeles (800 × 3 (RGB) × 480) dispositivos.
Sistema de colores:
Selección automática de PAL/NTSC/SECAM/ Sección de amplificador de potencia
PAL-M
Salidas: salidas de los altavoces
Impedancia de altavoz: de 4 a 8 Ω
Sección de sintonizador Salida máxima de potencia: 52 W × 4 (a 4 Ω)
FM
Rango de sintonización: Generales
de 87,5 a 108,0 MHz (a intervalos de 100 kHz) Salidas:
de 87,5 a 107,9 MHz (a intervalos de 200 kHz) Terminal de salida de video (posterior)
Paso de sintonía FM: 100 kHz/200 kHz Terminales de salida de audio (intercambiable
intercambiable entre altavoz subgraves y posterior)
Terminal de la antena: Terminal de control del relé de la antena
Conector de la antena externa motorizada
Frecuencia intermedia: 150 kHz Terminal de control del amplificador de potencia
Sensibilidad útil: 10 dBf Entradas:
Selectividad: 75 dB a 400 kHz Terminal de control ATT de teléfono
Relación señal-ruido: 70 dB (mono) Terminal de control de iluminación
Separación: 40 dB a 1 kHz Terminal de entrada de control remoto
Respuesta de frecuencia: 20 a 15 000 Hz Terminal de entrada de la antena
AM Terminal del control del freno de mano
Rango de sintonización: de 530 a 1 710 kHz Terminal de entrada del micrófono (sólo el modelo
Terminal de la antena: XAV-62BT)
Conector de la antena externa Terminal de entrada inverso
Frecuencia intermedia: 25 kHz Terminal de entrada de cámara
Sensibilidad: 26 µV Terminales de entrada de audio AUX (frontales/
posteriores)
Sección de reproductor de DVD/CD Terminal de entrada de video AUX
Conector de entrada de señal USB
Relación señal-ruido: 120 dB Terminal de entrada externo
Respuesta de frecuencia: 10 a 20 000 Hz Requisitos de alimentación: batería de automóvil de
Fluctuación y trémolo: inferior al límite medible cc 12 V (tierra negativo)
Distorsión armónica: 0,01% Dimensiones: aprox. 178 × 100 × 170 mm
Código de región: etiquetado en la parte inferior de la (ancho/alto/profundidad)
unidad Dimensiones de montaje: aprox. 182 × 111 × 164 mm
(ancho/alto/profundidad)
Sección de reproductor USB Peso: aprox. 1,9 kg
Interfaz: USB (velocidad completa) Accesorios suministrados:
Corriente máxima: 500 mA Control remoto: RM-X170
Componentes de instalación y conexiones
Comunicación inalámbrica*1 (1 juego)
Micrófono (sólo el modelo XAV-62BT)
Sistema de comunicación:
CD-ROM (disco de aplicación)
estándar Bluetooth versión 2.0 + EDR
Salida: Accesorios/equipos opcionales:
Cable de conexión USB y video para iPod:
clase de potencia de estándar Bluetooth 2
RC-202IPV, RC-200IPV
(máx. +4 dBm)
Rango máximo de comunicación: Vista cámara posterior: XA-R800C
campo visual aprox. 10 m*2
Banda de frecuencia: Es posible que su distribuidor no comercialice
banda de 2,4 GHz (2,4000 a 2,4835 GHz) algunos de los accesorios que figuran en la lista
Método de modulación: FHSS anterior. Consulte al distribuidor para obtener
Perfiles compatibles con Bluetooth*3: información detallada.
A2DP (Advanced Audio Distribution Profile)
Patentes de los EE.UU. y otros países usados con
AVRCP (Audio Video Remote Control Profile) 1.3
HFP (Handsfree Profile) 1.5
licencia de Dolby Laboratories.
PBAP (Phone Book Access Profile)
OPP (Object Push Profile)
66
Notas
Tecnología de codificación de audio MPEG • No se admiten los siguientes entornos de sistema.
Layer-3 y patentes bajo licencia de Fraunhofer IIS – Computadoras que no sean del tipo PC IBM,
y Thomson. como Macintosh, etc.
– Computadoras caseras
El diseño y las especificaciones están sujetos a – Computadoras con sistema operativo actualizado
cambios sin previo aviso. – Entorno de varias pantallas
– Entorno de arranque múltiple
Código de región – Entorno de máquina virtual
El sistema de regiones se utiliza para proteger los • Dependiendo del estado de la computadora, la
derechos de autor del software. operación podría no ser posible incluso con el
El código de región se encuentra en la parte inferior de entorno recomendado.
la unidad y sólo se pueden reproducir los DVD
identificados con el mismo código de región.
Los DVD identificados con ALL también se pueden
Solución de problemas
reproducir.
La siguiente lista de comprobación le ayudará a
Si intenta reproducir cualquier otro DVD, en la pantalla solucionar los problemas que puedan producirse con
del monitor aparecerá el mensaje “Reproducción la unidad.
prohibida por código región”. Algunos DVD pueden no Antes de consultarla, revise los procedimientos de
presentar la etiqueta de indicación del código de región, conexión y de funcionamiento.
aunque su reproducción esté prohibida por límites de
zona. Si el problema no se soluciona, visite el siguiente
sitio de soporte técnico.
Requisitos del sistema para el software
en el CD-ROM suministrado Sitio Web de soporte técnico en línea
Computadora Clientes de Latinoamérica:
• CPU/RAM http://esupport.sony.com/ES/LA/
– Máquina compatible con IBM PC/AT
– CPU: procesador Intel Pentium III 450 MHz o Para clientes de Asia y del Pacífico:
superior http://www.sony-asia.com/section/support
– RAM: 256 MB o más (para Windows XP), 512 MB http://www.sony-asia.com/caraudio/
o más (para Windows Vista o posterior)
• Unidad de CD-ROM
• Puerto USB
Generales
Sistema operativo
Windows XP, Windows Vista, Windows 7 La unidad no recibe alimentación.
• Revise la conexión o fusible.
Para obtener detalles sobre ediciones compatibles o
• Si la unidad está apagada y la pantalla se queda en
Service Packs, visite el siguiente sitio de soporte:
blanco, no se puede utilizar con el control remoto.
Clientes de Latinoamérica: t Encienda la unidad.
http://esupport.sony.com/ES/LA/
La antena motorizada no se extiende.
Para clientes de Asia y del Pacífico:
http://www.sony-asia.com/section/support La antena motorizada no dispone de una caja de relé.
http://www.sony-asia.com/caraudio/ No se escuchan pitidos.
Monitor • El sonido de los pitidos está cancelado (página 51).
Color de alta definición (16 bits) o más, • Se encuentra conectado un amplificador de potencia
800 × 600 píxeles o más opcional y no está usando el amplificador integrado.
Otro El contenido de la memoria se borró.
Conexión a Internet • Se presionó el botón de reinicio.
t Vuelva a almacenar los datos en la memoria.
• El cable de la fuente de alimentación o la batería se
ha desconectado o no se conectó correctamente.
Las emisoras almacenadas y la hora correcta
se borraron.
Se fundió el fusible.
La unidad emite un ruido cuando se cambia la
posición de encendido.
Los cables no se conectaron en forma correcta al
conector de alimentación auxiliar del automóvil.
67
Las indicaciones desaparecen del visualizador No es posible utilizar la sintonización
o no aparecen en el monitor. programada.
• El atenuador está ajustado en “Activar” (página 51). • Almacene la frecuencia correcta en la memoria.
• La pantalla se apaga si mantiene presionado • La señal de emisión es demasiado débil.
(SOURCE/OFF). No es posible utilizar la sintonización
t Presione (SOURCE/OFF) en la unidad hasta que automática.
se ilumine la pantalla. • El ajuste del modo de búsqueda local no es correcto.
• “M.OFF” está activado y la función Monitor apagado t La sintonización se detiene con demasiada
está activada (página 11). frecuencia:
t Toque cualquier parte de la pantalla para volver a ajuste “Local” en “ACTIVAR” (página 15).
encender la pantalla. t La sintonización no se detiene en ninguna
La pantalla no responde correctamente a la emisora:
pulsación. ajuste “Mono” en “ACTIVAR” (página 15).
• Toque una parte de a pantalla a la vez. Si se tocan dos • La señal de emisión es demasiado débil.
o más partes simultáneamente, la pantalla no t Use la sintonización manual.
funcionará correctamente. Durante la recepción de FM, la indicación
• Calibre el panel táctil de la pantalla (página 48). “Estéreo” parpadea.
La función de desconexión automático no • Sintonice la frecuencia deseada de forma precisa.
funciona. • La señal de emisión es demasiado débil.
La unidad está encendida. La función de desconexión t Ajuste “Mono” en “ACTIVAR” (página 15).
automático se activa después de apagar la unidad. Los programas de FM emitidos en estéreo se
t Salga de la fuente. escuchan en monoaural.
El control remoto no funciona. La unidad se encuentra en el modo de recepción
Si la función Monitor apagado está activada (la monoaural.
pantalla no se ilumina), no se puede utilizar el control t Ajuste “Mono” en “DESACT.” (página 15).
remoto (página 11).
No se pueden seleccionar los elementos del RDS
menú.
Los elementos del menú no disponibles aparecen en PTY muestra “None”.
gris. • La emisora actual no es una emisora RDS.
• No se han recibido datos de RDS.
AUX no se puede seleccionar como fuente. • La emisora no especifica el tipo de programa.
Todos los ajuste de entrada de AUX están ajustados en
“DESACT.”.
t Ajuste la opción “Entrada AUX Frontal” en Imagen
“Audio” o la opción “Entrada AUX posterior” en
No hay imagen o la imagen produce un ruido.
“Video” o “Audio” (página 60).
• No se ha realizado correctamente la conexión.
No se puede seleccionar la opción “AUX • Verifique la conexión al equipo conectado y ajuste el
Frontal”. selector de entrada del equipo en la fuente
Hay un iPod conectado a través del conector USB. correspondiente a esta unidad.
t Desconecte el iPod (página 30). • El disco está defectuoso o sucio.
• La instalación no es correcta.
t Instale la unidad en un ángulo inferior a 45° en
Recepción de radio una parte estable del automóvil.
No es posible recibir las emisoras. • El cable del freno de mano (verde claro) no está
Hay ruidos que obstaculizan el sonido. conectado al cable del interruptor del freno de mano
• La conexión no es correcta. o éste no está accionado.
t Conecte un cable de control de antena motorizada La imagen no se ajusta a la pantalla.
(azul) o un cable de fuente de alimentación La relación de aspecto del DVD es fija.
auxiliar (rojo) al cable de fuente de alimentación
del amplificador de señal de la antena del No hay imagen o la imagen produce un ruido
automóvil (solamente cuando el vehículo en el monitor posterior.
disponga de una antena motorizada FM/AM en el • Está seleccionada una fuente o modo que no está
cristal posterior o lateral). conectado. Si no hay entrada, no aparece la imagen
t Compruebe la conexión de la antena del en el monitor posterior.
automóvil. • El ajuste del sistema de color no es correcto.
t Si la antena automática no sube, revise la t Ajuste el sistema de color en “PAL” o “NTSC”
conexión del cable de control de antena de acuerdo con el monitor conectado (página 51).
motorizada. • La imagen de la vista cámara posterior aparece en
esta unidad.
t La imagen no aparece en el monitor posterior si la
imagen de la vista cámara posterior se visualiza
en esta unidad.
68
Sonido Los archivos MP3/WMA/AAC/JPEG/Xvid/
No hay sonido, se producen saltos en el MPEG-4 no se reproducen.
sonido o el sonido se distorsiona. • La grabación del disco no se corresponde con los
• No se ha realizado correctamente la conexión. niveles 1 ó 2 de ISO 9660, con el formato de
• Verifique la conexión al equipo conectado y ajuste el expansión de Joliet/Romeo (DATA CD) ni con el
selector de entrada del equipo en la fuente formato UDF Bridge (DATA DVD) (página 62).
correspondiente a esta unidad. • La extensión del archivo es incorrecta (página 63).
• El disco está defectuoso o sucio. • Los archivos no están almacenados en formato MP3/
• La instalación no es correcta. WMA/AAC/JPEG/Xvid/MPEG-4.
t Instale la unidad en un ángulo inferior a 45° en • Si el disco contiene diferentes tipos de archivos,
una parte estable del automóvil. solamente puede reproducirse el tipo de archivo
• La velocidad de muestreo del archivo MP3 no es 32, seleccionado (audio/video/imagen).
44,1 ni 48 kHz. t Seleccione el tipo de archivo adecuado mediante
• La velocidad de muestreo del archivo WMA no es la lista (página 32).
32, 44,1 ni 48 kHz. Los archivos MP3/WMA/AAC/JPEG/Xvid/
• La velocidad de muestreo del archivo AAC no es MPEG-4 tardan más tiempo en reproducirse
44,1 ni 48 kHz. que los demás.
• La velocidad de bits del archivo MP3 no está entre 48 La reproducción de los siguientes discos tarda más
y 192 kbps. tiempo en iniciarse.
• La velocidad de bits del archivo WMA no está entre – disco grabado con una estructura de árbol
64 y 192 kbps. complicada.
• La velocidad de bits del archivo AAC no está entre 40 – disco grabado en Multi Session o Multi Border.
y 320 kbps. – disco al que es posible añadir datos.
• La unidad está en modo de pausa, retroceso o avance El disco no comienza a reproducirse desde el
rápido. principio.
• Los ajustes de las salidas no se configuraron La función de reanudación de la reproducción o
correctamente. reanudación de la reproducción multidisco (página 57)
• El nivel de salida del DVD es demasiado bajo se ha activado.
(página 21).
Algunas funciones no se pueden realizar.
• El volumen es demasiado bajo.
Según el disco, es posible que no pueda realizar
• La función ATT o la función ATT de teléfono se
operaciones como detener la reproducción, realizar
activa (cuando se conecta el cable de interfaz de un
búsquedas o definir que el disco se reproduzca de
teléfono para automóvil al cable ATT).
manera repetida o aleatoria. Para obtener más
• La posición del control de equilibrio “Equilibrio” no
información, consulte el manual suministrado con el
está ajustada para un sistema de 2 altavoces.
disco.
• Formato no admitido (como DTS).
t Revise si el formato es compatible con esta No puede modificar el idioma de la pista de
unidad (página 9). sonido o de los subtítulos, ni el ángulo.
• Utilice el menú DVD en lugar del botón de selección
El sonido se escucha con ruido.
directa del control remoto (página 18).
Mantenga los cables alejados entre sí.
• El DVD no incluye pistas ni subtítulos en varios
idiomas ni opciones de ángulos múltiples.
Operación de discos • El DVD no permite el cambio.
No es posible insertar el disco. Los botones de operación no funcionan.
• Ya hay un disco insertado. El disco no se expulsa.
• El disco se insertó a la fuerza al revés o en forma Presione el botón de reinicio (página 14).
incorrecta.
El disco no se reproduce. Reproducción de USB
• El disco está defectuoso o sucio.
No se pueden reproducir elementos a través
• El disco no se puede reproducir.
de un concentrador USB.
• El DVD no se puede reproducir debido al código de
Esta unidad no puede reconocer dispositivos USB a
región.
través de un concentrador USB.
• El disco no está finalizado (página 62).
• El formato del disco y la versión del archivo no son No se pueden reproducir elementos.
compatibles con esta unidad (página 9, 62). Vuelva a conectar el dispositivo USB.
• Presione Z para extraer el disco.
continúa en la página siguiente t
69
El dispositivo USB se demora en reproducirse. Existe eco o ruido en las conversaciones
El dispositivo USB contiene archivos de gran tamaño o telefónicas.
archivo con estructuras en árbol complicadas. • Reduzca el volumen.
Suena un pitido. • “Modo EC/NC” está ajustado en “DESACT.”.
Durante la reproducción, se desconectó el dispositivo t Ajuste “Modo EC/NC” en “Modo 1” o en
USB. “Modo 2” (página 45).
t Antes de desconectar un dispositivo USB, • Si el ruido ambiental distinto al sonido de la llamada
asegúrese de detener primero la reproducción para telefónica es alto, intente reducir este ruido.
proteger los datos. t Cierre la ventana si el camino es ruidoso.
t Baje el aire acondicionado si está alto.
El sonido es intermitente.
El sonido podría ser intermitente a una velocidad alta La calidad de sonido del teléfono es mala.
de bits de más de 320 kbps. La calidad del sonido del teléfono depende de las
condiciones de recepción del teléfono celular.
t Si la recepción no es buena, mueva el automóvil a
Función Bluetooth (XAV-62BT) un lugar donde pueda mejorar la señal del teléfono
El otro dispositivo Bluetooth no puede celular.
detectar esta unidad. El volumen del dispositivo Bluetooth
• Ajuste “Señal” en “ACTIV.” (página 44). conectado es bajo o alto.
• Ajuste “Detectable” en “Mostrar” (página 44). El nivel de volumen diferirá según el dispositivo
• Mientras se conecta a un dispositivo Bluetooth, esta Bluetooth.
unidad no puede ser detectada desde otro dispositivo. t Reduzca las diferencias en el nivel de volumen
Desconecte la conexión actual y busque esta unidad entre esta unidad y el dispositivo Bluetooth
desde otro dispositivo. El dispositivo desconectado se (página 44).
puede volver a conectar seleccionándolo en la lista de No se emite sonido durante la transmisión de
dispositivos registrados. audio.
Esta unidad no puede detectar al otro El dispositivo Bluetooth conectado está en pausa.
dispositivo Bluetooth. t Cancele la pausa del dispositivo Bluetooth.
Revise el ajuste de Bluetooth del otro dispositivo. El sonido salta durante la transmisión de
No es posible la conexión. audio.
• Dependiendo del otro dispositivo, la búsqueda desde • Reduzca la distancia entre la unidad y el dispositivo
esta unidad podría no ser posible. Bluetooth.
t Busque esta unidad desde el otro dispositivo. • Si el dispositivo Bluetooth está guardado en un
• Dependiendo del estado del otro dispositivo, la estuche, el cual interrumpe la señal, sáquelo mientras
búsqueda desde esta unidad podría no ser posible. lo usa.
t Busque esta unidad desde el otro dispositivo. • Hay varios dispositivos Bluetooth u otros dispositivos
• Revise los procedimientos de asociación y conexión que emiten ondas de radio en uso en las cercanías.
en el manual del otro dispositivo, etc., y vuelva a t Apague los otros dispositivos.
realizar la operación. t Aumente la distancia de los otros dispositivos.
El nombre del dispositivo detectado no • El sonido de la reproducción se detiene
aparece. momentáneamente cuando esta conectado a un
Dependiendo del estado del otro dispositivo, podría no teléfono celular. No se trata de una falla de
ser posible obtener el nombre. funcionamiento.
No hay tono de llamada. No se puede controlar el dispositivo Bluetooth
• Suba el volumen mientras recibe una llamada. conectado durante la transmisión de audio.
• Dependiendo del dispositivo de conexión, el tono de Revise que el dispositivo Bluetooth conectado admita
llamada podría no enviarse correctamente. AVRCP.
t Ajuste “Tono de llamada” en “Predet.” Algunas características no funcionan.
(página 44). Revise que el dispositivo de conexión admita las
El volumen de la voz de la persona que habla funciones en cuestión.
es bajo. El nombre de la otra persona no aparece
Suba el volumen durante una llamada. cuando se recibe una llamada.
La otra persona dice que el volumen es • La otra persona no está guardada en la agenda
demasiado bajo o alto. telefónica.
Ajuste el nivel de “Sens. Micrófono” (página 39). t Agregue a la otra persona a la agenda telefónica
(página 39).
• El teléfono que llama no está definido para enviar el
número de teléfono.
Una llamada se contestó involuntariamente.
• El teléfono de conexión está ajustado para iniciar una
llamada en forma automática.
• “Resp. automática” de esta unidad está ajustado en
70 “Corto” o en “Largo” (página 44).
La asociación falló debido a que se agotó el Error
tiempo de espera.
Dependiendo del dispositivo de conexión, el límite de Para los modelos XAV-62BT y XAV-622
tiempo para asociación podría ser corto. Intente • El dispositivo USB no se reconoció en forma
realizar la asociación dentro del tiempo ajustando un automática.
clave de un solo dígito. t Vuela a conectarlo.
No se puede utilizar la función Bluetooth. Sólo para el modelo XAV-62BT.
Salga de la fuente manteniendo presionado • El contenido de la agenda telefónica cambia durante
(SOURCE/OFF) durante 1 segundo y, a continuación, el acceso del teléfono celular.
encienda la unidad. t Acceda nuevamente a la agenda telefónica.
Durante una llamada de manos libres no se • El teléfono celular desconecta el acceso a la agenda
emite sonido desde los altavoces del telefónica.
automóvil. t Acceda nuevamente a la agenda telefónica.
Si el sonido proviene del teléfono celular, ajústelo para • La descarga de la agenda telefónica del teléfono
que emita el sonido desde los altavoces del automóvil. celular falló debido a un problema.
t Descargue nuevamente la agenda telefónica
(página 40).
Indicaciones/mensajes de error • La exploración de la agenda telefónica del teléfono
celular falló debido a un problema.
No se encontró el dispositivo Bluetooth. t Reintente la exploración (página 41).
La unidad no puede detectar un dispositivo Bluetooth • La exploración de la agenda telefónica del teléfono
apto para conexión. celular falló debido a un problema.
t Revise el ajuste de Bluetooth del otro dispositivo al t Reintente la creación de lista (página 41).
que desea conectarse. Error - Seleccione ‘inicializar’ en el menú de
Ocupado ahora… Vuelva a intentar. ajustes Bluetooth.
La unidad está ocupada. Se produjo un error de memoria.
t Espere un momento y vuelva a intentar. t Inicialice el ajuste de Bluetooth (página 45).
No se puede leer. Dispositivo manos libres no está disponible.
• La unidad no puede leer los datos debido a algún No hay un teléfono celular conectado.
problema. t Conecte un teléfono celular (página 36).
• Se han dañado o perdido los datos. Los concentradores no son compatibles.
• El disco está dañado. Los concentradores USB no se admiten en esta unidad.
• El disco no es compatible con esta unidad. Local Seek +/Local Seek –
• El disco no está finalizado. El modo de búsqueda local está activado durante la
Error del disco sintonización automática.
• El disco está sucio o se insertó al revés. No se encontró ningún dispositivo.
t Límpielo o insértelo en forma correcta. No hay ningún dispositivo en la lista de dispositivos
• Se insertó un disco vacío. Bluetooth registrados.
• No es posible reproducir el disco debido a un t Realice una asociación con un dispositivo
problema. Bluetooth (página 35).
t Inserte otro disco.
• El disco no es compatible con esta unidad. No hay datos reproducibles.
t Inserte un disco compatible. El disco no incluye datos que puedan reproducirse.
• Presione Z para extraer el disco. No hay datos de SensMe™ en el dispositivo.
Lectura del disco... El dispositivo USB conectado no contiene datos para
La unidad está leyendo toda la información de archivos la función SensMe™ o los datos se movieron a una
o álbumes (carpetas) del disco. ubicación incorrecta en el dispositivo USB.
t Espere hasta que finalice la lectura y se inicie la Compensación
reproducción automáticamente. Es posible que Es posible que se haya producido una falla interna.
demore más de un minuto en función de la t Revise la conexión. Si el indicador de error
estructura del disco. permanece en pantalla, póngase en contacto con el
distribuidor Sony más cercano.
Falla de la conexión de salida.
La conexión de los altavoces o amplificadores no es
correcta.
t Consulte el manual de “Instalación/Conexiones”
suministrado para comprobar la conexión.
71
Precaución de sobrecarga en USB
El dispositivo USB está sobrecargado.
t Desconecte el dispositivo USB, luego cambie la
fuente presionando (SOURCE/OFF).
t Indica que el dispositivo USB no está funcionando
o que hay un dispositivo no compatible conectado.
Reproducción prohibida por código región.
El código de región del DVD difiere del código de
región de la unidad.
Presione restablecer.
Esta unidad o el dispositivo USB no pueden utilizarse
debido a un problema.
t Presione el botón de reinicio (página 14).
Leyendo datos SensMe™...
La unidad está leyendo todos los datos para la función
SensMe™ en el dispositivo USB conectado.
t Espere hasta que finalice la lectura. Dependiendo
de la cantidad de datos, etc., podría tardar.
No se admite el dispositivo USB conectado.
Para obtener más información sobre la compatibilidad
del dispositivo USB, visite el sitio de soporte.
Los datos de SensMe™ están dañados.
Los datos para la función SensMe™ tienen un
problema, como nombre de archivo, información
alterado, etc.
El dispositivo USB no está conectado.
USB se selecciona como fuente sin un dispositivo USB
conectado. Durante la reproducción se desconectó un
dispositivo USB o un cabe USB.
t Asegúrese de conectar un dispositivo USB y un
cable USB.
Lectura USB...
La unidad está leyendo toda la información de archivo/
álbum (carpeta) del dispositivo USB conectado.
t Espere hasta que finalice la lectura y se inicie la
reproducción automáticamente. Dependiendo de la
estructura, podría tardar.
“ ”o“ ”
Durante la operación de avance o retroceso rápido,
llegó al principio o al final del disco, por lo que no es
posible continuar.
“ ”
No se puede mostrar el carácter con la unidad.
72
Lista de códigos de idiomas/códigos de área
Lista de códigos de idiomas
La ortografía de los idiomas cumple con el estándar ISO 639: 1988 (E/F).
Código Idioma Código Idioma Código Idioma Código Idioma
S
Salida de múltiples canales
(Salida múltip. canales) 56
Señal de Bluetooth
(Señal) 36, 44
Sens. Micrófono (Sens.
Micrófono) 39, 45
SensMe™ 26
Sistema de color de salida
(Sist. de color de salida) 51
Sistema de datos de radio
(RDS) 16
Sonido de la operación
(Pitido) 51
Sonido de pitido de ZAPPIN
(Tono de ZAPPIN) 57
75
http://www.sony.net/
Sony Corporation Printed in Thailand