You are on page 1of 1

PROTOCOL FOR IMPLEMENTATION OF MOC-143 (Proposal to install 2 emergency push buttons in

CHP control desk with hardware wiring from ICHP-3.3KV HT panel) Dt:23.04.2020

All HT motors of ICHP -17nos were taken into service on no load (Except crusher#3,4). On pressing
the 2nos push button in CCR desk (Photo attached) all 17nos motors tripped at the same time.

The same tripping has been logged in 3.3KV Incomer-1 relay (photo attached)

Signature

For EMD For Operations CHP

R.MRITHUN KARTHIK / RAVI KISHORE SHIFT INCHARGE-CHP

You might also like