The document provides data from biochemical oxygen demand (BOD) tests conducted at three locations in a wastewater treatment plant: raw sewage, secondary effluent, and final effluent. The initial and final dissolved oxygen levels were recorded for samples from each location incubated for 5 days at 20 degrees C along with the seed sample volumes added. The data will be used to prepare a BOD report analyzing and discussing the results and justifying conclusions.
The document provides data from biochemical oxygen demand (BOD) tests conducted at three locations in a wastewater treatment plant: raw sewage, secondary effluent, and final effluent. The initial and final dissolved oxygen levels were recorded for samples from each location incubated for 5 days at 20 degrees C along with the seed sample volumes added. The data will be used to prepare a BOD report analyzing and discussing the results and justifying conclusions.
The document provides data from biochemical oxygen demand (BOD) tests conducted at three locations in a wastewater treatment plant: raw sewage, secondary effluent, and final effluent. The initial and final dissolved oxygen levels were recorded for samples from each location incubated for 5 days at 20 degrees C along with the seed sample volumes added. The data will be used to prepare a BOD report analyzing and discussing the results and justifying conclusions.
The dissolved oxygen (DO) data at three (3) different samplings location in wastewater treatment plant (WWTP) are tabulated in Table 1.0. The total volume of the BOD bottle is 300 ml and average initial blank and final blank are 7.7 mg/L and 7.6 mg/L respectively. Prepare a BOD report with result analysis, discussion and justification. Table 1.0: Data obtained in laboratory Location Seed sample (ml) Sample DO initial DO after 5 days incubated at 20° C