Device Characteristic Value PC1 Hostname PC1 PC1 IP address 10.10.1.10/24 PC1 Default gateway 10.10.1.1 PC2 Hostname PC2 PC2 IP address 10.10.1.20/24 PC2 Default gateway 10.10.1.1 SW1 Hostname SW1 SW1 VLAN 1 IP address 10.10.1.2/24 SW1 Default gateway 10.10.1.1 SW1 Ethernet0/0 description Link to SW2 SW1 Ethernet0/1 description Link to PC1 SW2 Hostname SW2 SW2 VLAN 1 IP address 10.10.1.3/24 SW2 Default gateway 10.10.1.1 SW2 Ethernet0/0 description Link to SW1 SW2 Ethernet0/1 description Link to R1 SW2 Ethernet0/2 description Link to PC2 R1 Hostname R1 R1 Ethernet0/0 description Link to SW2 R1 Ethernet0/0 IP address 10.10.1.1/24 R1 Loopback 0 IP 10.10.3.1/24 PCs in the virtual lab environment are simulated as routers, so you should use Cisco IOS commands to configure them or make verifications.