To connect ProBot to programming software, install the Arduino driver by selecting it in the EDVON software when prompted by the firewall. Then check the Control Panel's Device Manager to find which COM port the Arduino UNO is connected to and select that port and the Arduino UNO/ProBot board in the EDVON software's connection settings.
To connect ProBot to programming software, install the Arduino driver by selecting it in the EDVON software when prompted by the firewall. Then check the Control Panel's Device Manager to find which COM port the Arduino UNO is connected to and select that port and the Arduino UNO/ProBot board in the EDVON software's connection settings.
To connect ProBot to programming software, install the Arduino driver by selecting it in the EDVON software when prompted by the firewall. Then check the Control Panel's Device Manager to find which COM port the Arduino UNO is connected to and select that port and the Arduino UNO/ProBot board in the EDVON software's connection settings.
PROBOT DRIVER INSTALLATION Installing the Arduino Driver Step#1 • Connect your PC and ProBot through a USB cable. • Insert it into data port of ProBot. Step#2 • Go to EDVON software, and from “Connect” option, select “Install Arduino Driver”. • If firewall prompts for security, allow access. SOFTWARE CONNECTIONS Connecting ProBot to EDVON Software PC Settings CONTROL PANEL & DEVICE MANAGER Step#1 • Type “Control Panel” in the search bar on your desktop. • Click on the “Control Panel” result displayed. Step#2 • In the “Control Panel”, go into the “Hardware & Sound” section. • In “Hardware & Sound”, select “Devices & Printers”. Step#3 Check the COM (port) on which Arduino UNO is connected. EDVON Settings BOARD & PORT SELECTION Step#1 • In EDVON software, go to “Connect” option. • From there, go to “Serial Ports” and select the specified COM. Step#2 • In EDVON software, go to “Boards” option. • From there, check “Arduino UNO” & “Probot”.