Professional Documents
Culture Documents
Corrigenda
December 2019
This corrigenda makes editorial corrections to the English version of the IMDG Code (Amendment 39-18, as adopted
by resolution MSC.442(99)).
Volume 1
Preamble
In paragraph 14, replace “(MSC.1/Circ.1025 as amended by MSC.1/Circ.1025/Add.1, MSC.1/Circ.1262, MSC.1/Circ.1360,
MSC.1/Circ.1438, MSC.1/Circ.1476, MSC.1/Circ.1522 and MSC.1/Circ.1588” with “(MSC.1/Circ.1588)”.
PART 2 – CLASSIFICATION
the UN 3109 entry, for “1-PHENYLETHYL HYDROPEROXIDE”, move “≥ 62” from column “Diluent
In
type A (%)” to column “Diluent type B (%)”.
P407 Under Outer packagings, in the second line, replace “4H1,4 H2” with “4H1, 4H2”.
P504 Under Combination packagings, in sub-paragraph (4), add “1B1” before “1B2”.
P621 In paragraph (2), indent the sentence “Composite packagings (6HA1, 6HB1, 6HG1, 6HH1, 6HD1, 6HA2,
6HB2, 6HC, 6HD2, 6HG2, 6HH2, 6PA1, 6PB1, 6PG1, 6PD1, 6PH1, 6PH2, 6PA2, 6PB2, 6PC, 6PG2 or 6PD2).”
P909 Under Additional requirements, paragraph 2, fourth indent, replace “the use of a non-conductive and
non-combustible” with “the use of an electrically non-conductive and a non-combustible” and paragraph 3,
replace “non-conductive” with “an electrically non-conductive”.
Under Additional requirements, fourth indent, replace “the use of a non-conductive and non-combustible”
P910
with “the use of an electrically non-conductive and a non-combustible”.
IBC08 Under Special packing provisions, in B21, replace “For substances, UN Nos. 1374, 2590 and 3535 in
IBCs other than metal or rigid plastics IBCs,” with “For solid substances in IBCs other than metal or rigid
plastics IBCs,”.
IBC520 In the UN 3109 entry, in the column for Organic peroxide, amend the entries as follows:
In the entry for “tert-Butyl peroxyacetate, not more than 32% in diluent type A”, add “31A” in “Type of IBC”
column and add “1250” in “Maximum quantity (litres)” column.
In the entry for “3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane not more than 27% in diluent type A”, add
“,” after “-triperoxonane”.
In the UN 3119 entry, replace the sequence of the first two entries as follows:
LP905 In the introductive sentence, replace “cells and batteries” with “cells or batteries” (twice).
In paragraph (2), after the word “equipment”, add the words “containing cells or batteries”.
LP906 In the second sentence, after the first paragraph, delete the words “cells or”.
TP10 In the second sentence, replace “beyond the date of expiry of the last testing” with “beyond that date”.
4.2.6 Additional provisions for the use of road tank vehicles and road gas
elements vehicles
4.2.6.2 In the second sentence, replace “and 8” with “, 8 and 9”.
5.1.5.3 Determination of transport index (TI) and criticality safety index (CSI)
5.1.5.3.4 In Table 5.1.5.3.4 – Categories of packages, overpacks and freight containers, in footnote “b”, replace
“(see table 7.1.4.5.3)” with “(see table in 7.1.4.5.3.1)”.
Class 2: Gases
Label model no. 2.1
In second column, delete “(except as provided for in 5.2.2.2.1.6.4)”;
in third column, under “Flame: black or white”, add “(except as provided for in 5.2.2.2.1.6.4)”; and
in fifth column, under “(black or white)”, add “(except as provided for in 5.2.2.2.1.6.4)”.
For example:
– UN 1760 CORROSIVE LIQUID, N.O.S. (phosphoric acid, acetic acid) 8 III IMDG Code segregation
group 1 – Acids; or
– UN 1760 CORROSIVE LIQUID, N.O.S. (phosphoric acid, acetic acid) 8 III IMDG Code segregation
group SGG1.”.
Chapter 6.2 Provisions for the construction and testing of pressure receptacles,
aerosol dispensers, small receptacles containing gas (gas cartridges)
and fuel cell cartridges containing liquefied flammable gas
6.2.2 Provisions for UN pressure receptacles
6.2.2.1 Design, construction and initial inspection and test
6.2.2.1.8 For reference “ISO 18172-1:2007”, in column Applicable for manufacture, add “Until further notice”.
6.2.2.7.4 In sub-paragraph (n), after “the country of manufacture as”, insert “indicated by”.
6.2.2.9.4 In sub-paragraph (a), in the first sentence, after “as”, insert “indicated by”.
Chapter 6.7 Provisions for the design, construction, inspection and testing
of portable tanks and multiple-element gas containers (MEGCs)
6.7.2 Provisions for the design, construction, inspection and testing
of portable tanks intended for the transport of substances
of class 1 and classes 3 to 9
6.7.2.3 Design criteria
6.7.2.3.2 In the second sentence, replace “4.2.5” with “4.2.5.2.6”.
6.9.5.5 Marking
the table, replace “SG 74”, “SG 75”, “SG 76”, “SG 77”, “SG 78” with “SG74”, “SG75”, “SG76”, “SG77” and
In
“SG78”, respectively.
“The provisions for segregation between containers on board containerships with closed cargo holds and
on board hatchless containerships are given in the tables in 7.4.3.2 and 7.4.3.3, respectively.”
7.6.3.1.2
Replace the words “having a reference to 7.6.3.1.2 in column 16b” with the words “for which it is referred
to in segregation code SG29 or SG50 in column 16b”.
“Competent authority for issuing agreements for class 7 packages containing radioactive materials:
Autorité de Sûreté Nucléaire (ASN)
15, rue Louis Lejeune
CS 70013
F-92541 Montrouge Cedex
FRANCE
Telephone: +33 (0)1 46 16 41 09
Email: dts-transport@asn.fr”.
Volume 2
7 Heavy metals and their salts (including their organometallic compounds) (SGG7)
Delete “1512 Zinc ammonium nitrite”.
Place the two UN 1931 entries in alphabetical order, to read as follows:
“1931 Zinc dithionite
1931 Zinc hydrosulphite”.
8 Hypochlorites (SGG8)
In the UN 1748 entry, replace the text as follows:
“Calcium hypochlorite, dry or calcium hypochlorite mixture, dry with more than 39% available
chlorine (8.8% available oxygen)”.
17 Azides (SGG17)
In the UN 0129 entry, replace the text as follows:
“Lead azide, wetted with not less than 20% water, or mixture of alcohol and water, by mass”.
18 Alkalis (SGG18)
In the UN 2671 entry, replace the text as follows:
“Aminopyridines (o-, m-, p-)”.
In the UN 2678 entry, replace the text as follows:
“Rubidium hydroxide”.
In the UN 2949 entry, replace “solid” with “hydrated”.
UN No. Amendment
1011 Move “392” from column (5) to column (6)
1016 Move “974” from column (5) to column (6)
1051 In column (15), replace “S-D” with “S-D”
1092 In column (15), replace “S-D” with “S-D”
1098 In column (15), replace “S-D” with “S-D”
1099 In column (15), replace “S-D” with “S-D”
1143 In column (15), replace “S-D” with “S-D”
1144 In column (17), replace the words “Explosive limits: 1.4% to …” with “Lower explosive limit: 1.4%.”
1156 In column (17), replace the words “Explosive limits: 1.6% to …” with “Lower explosive limit: 1.6%.”
1163 In column (15), replace “S-C” with “S-C”, and in column (16b), move “SGG18” above “SG5”
1206 In column (15), replace “S-D” with “S-D”
1208 In column (15), replace “S-D” with “S-D”
1218 In column (15), replace “S-D” with “S-D”
1244 In column (16b), move “SGG18” above “SG5”
1259 In column (15), replace “S-D” with “S-D”
1264 In column (17), replace the words “Explosive limits: 1.3% to …” with “Lower explosive limit: 1.3%.”
1303 In column (15), replace “S-D” with “S-D”
1305 In column (17), replace the words “Explosive limits: 3% to …” with “Lower explosive limit: 3%.”
1347 In column (16b), move “SGG7” above “SG7”
1405 PG II In column (9), insert “PP40”
1449 In column (16b), move “SGG16” above “SG16”
1457 In column (16b), move “SGG16” above “SG16”
1472 In column (16b), move “SGG16” above “SG16”
1476 In column (16b), move “SGG16” above “SG16”
1483 PG II In column (16b), move “SGG16” above “SG16”
1483 PG III In column (16b), move “SGG16” above “SG16”
1491 In column (16b), move “SGG16” above “SG16”
10 IMDG Code 2018 Edition (Amendment 39-18) – Corrigenda – December 2019
UN No. Amendment
1739 In column (15), replace “S-B” with “S-B”
1748 PG III In column (16b), add “SGG8”
1753 In column (15), replace “S-B” with “S-B”
1758 In column (17), delete the sentence: “In the presence of moisture, highly corrosive to most metals.”
1761 PG II In column (15), replace “S-B” with “S-B”
1761 PG III In column (15), replace “S-B” with “S-B”
1766 In column (15), replace “S-B” with “S-B”
1791 PG II In column (15), replace “S-B” with “S-B”
1791 PG III In column (15), replace “S-B” with “S-B”
1840 In column (15), replace “S-B” with “S-B”
1843 In column (15), replace “S-A” with “S-A”
1846 In column (15), replace “S-A” with “S-A”
1889 In column (15), replace “S-B” with “S-B”
1892 In column (15), replace “S-A” with “S-A”
1894 In column (15), replace “S-A” with “S-A”
1895 In column (15), replace “S-A” with “S-A”
1897 In column (15), replace “S-A” with “S-A”
1935 PG I In column (15), replace “S-A” with “S-A”
1935 PG II In column (15), replace “S-A” with “S-A”
1935 PG III In column (15), replace “S-A” with “S-A”
2014 In column (16b), move “SGG16” above “SG16”
2015 In column (16b), move “SGG16” above “SG16”
2023 In column (15), replace “S-D” with “S-D”
2024 PG I In column (15), replace “S-A” with “S-A”
2024 PG II In column (15), replace “S-A” with “S-A”
2024 PG III In column (15), replace “S-A” with “S-A”
2025 PG I In column (15), replace “S-A” with “S-A”
2025 PG II In column (15), replace “S-A” with “S-A”
2025 PG III In column (15), replace “S-A” with “S-A”
2026 PG I In column (15), replace “S-A” with “S-A”
2026 PG II In column (15), replace “S-A” with “S-A”
2026 PG III In column (15), replace “S-A” with “S-A”
2029 In column (16b), move “SGG18” above “SG5”
2038 In column (15), replace “S-A” with “S-A”
2046 In column (15), replace “S-D” with “S-D”
2057 PG II In column (15), replace “S-D” with “S-D”
2057 PG III In column (15), replace “S-D” with “S-D”
2216 In column (6), delete “945”
2218 In column (15), replace “S-C” with “S-C”
12 IMDG Code 2018 Edition (Amendment 39-18) – Corrigenda – December 2019
UN No. Amendment
2612 In column (17), replace the words “Explosive limits: 2% to …” with “Lower explosive limit: 2%.”
2651 In column (15), replace “S-A” with “S-A”
2672 In column (15), replace “S-B” with “S-B”
2709 In column (15), replace “S-D” with “S-D”
2777 PG I In column (15), replace “S-A” with “S-A”
2777 PG II In column (15), replace “S-A” with “S-A”
2777 PG III In column (15), replace “S-A” with “S-A”
2778 PG I In column (15), replace “S-D” with “S-D”
2778 PG II In column (15), replace “S-D” with “S-D”
2786 PG I In column (15), replace “S-A” with “S-A”
2786 PG II In column (15), replace “S-A” with “S-A”
2786 PG III In column (15), replace “S-A” with “S-A”
2787 PG I In column (15), replace “S-D” with “S-D”
2787 PG II In column (15), replace “S-D” with “S-D”
2788 PG I In column (15), replace “S-A” with “S-A”
2788 PG II In column (15), replace “S-A” with “S-A”
2788 PG III In column (15), replace “S-A” with “S-A”
2826 In column (15), replace “S-C” with “S-C”
2842 In column (17), replace the words “Explosive limits: 3.4% to …” with “Lower explosive limit: 3.4%.”
3011 PG I In column (15), replace “S-D” with “S-D”
3011 PG II In column (15), replace “S-D” with “S-D”
3011 PG III In column (15), replace “S-D” with “S-D”
3012 PG I In column (15), replace “S-A” with “S-A”
3012 PG II In column (15), replace “S-A” with “S-A”
3012 PG III In column (15), replace “S-A” with “S-A”
3019 PG I In column (15), replace “S-D” with “S-D”
3019 PG II In column (15), replace “S-D” with “S-D”
3019 PG III In column (15), replace “S-D” with “S-D”
3020 PG I In column (15), replace “S-A” with “S-A”
3020 PG II In column (15), replace “S-A” with “S-A”
3020 PG III In column (15), replace “S-A” with “S-A”
3073 In column (16b), move “SGG18” above “SG5”
3090 In column (17), delete the following sentence: “Lithium batteries may also be shipped in, or packed
with, equipment.”
3091 In column (17), replace “See above” with “Electrical batteries containing lithium encased in a rigid
metallic body. Lithium batteries may also be shipped in, or packed with, equipment. Electrical
lithium batteries may cause fire due to an explosive rupture of the body caused by improper
construction or reaction with contaminants.”
3146 PG I In column (15), replace “S-A” with “S-A”
3146 PG II In column (15), replace “S-A” with “S-A”
3146 PG III In column (15), replace “S-A” with “S-A”
SP133 In the last sentence, replace “7.2.3.3, 7.1.3.1 and 7.1.4.4” with “7.1.3.1, 7.1.4.4 and 7.2.3.3”.
SP188
Move the last two sentences “When packages are placed in an overpack, the lithium battery mark shall
either be clearly visible or be reproduced on the outside of the overpack and the overpack shall be marked
with the word “OVERPACK”. The lettering of the “OVERPACK” mark shall be at least 12 mm high;” from
sub-paragraph .5 to the end of sub-paragraph .6.
In sub-paragraphs .7 and .8, replace “Except when batteries” with “Except when cells or batteries”.
14 IMDG Code 2018 Edition (Amendment 39-18) – Corrigenda – December 2019
SP241 In the second sentence, replace the words “test No. 1” with the words “test N.1”.
SP362 In the first sentence, replace the words “2.2.1.2.1 or 2.2.1.2.2” with “2.2.1.1 and 2.2.1.2.1 or 2.2.1.2.2”.
SP392 Under CNG tanks, in the entry for ECE Regulation No. 110, in the first sentence, after the words
“concerning”, add the words “the approval of”.
IUnder Hydrogen pressure tanks, in the entry for ECE Regulation No. 134, replace “Hydrogen and fuel
cell vehicles (HFCV)” with the following text:
“Uniform provisions concerning the approval of motor vehicles and their components with regards to the
safety-related performance of hydrogen-fuelled vehicles (HFCV)”.
sub-paragraph .2, in Note 1, replace the words “standard ISO 11623:2015 Transportable gas cylinders –
In
Periodic inspection and testing of composite gas cylinders” with the words “standard ISO 11623:2015 Gas
cylinders – Composite construction – Periodic inspection and testing”.
APPENDICES
In the table, for class 5.2, after the entry UN 3120, in the column “Proper shipping name”, insert the words
General entries.
the table, for class 6.1, under Specific entries, delete the entry UN 3462, TOXINS, EXTRACTED FROM
In
LIVING SOURCES, SOLID, N.O.S.
INDEX
Replace “ARTICLES CONTAINING A SUBSTANCE WHICH EMITS FLAMMABLE GAS IN CONTACT WITH
WATER, N.O.S.” with the following:
“ARTICLES CONTAINING A SUBSTANCE WHICH IN CONTACT WITH WATER EMITS FLAMMABLE
GASES, N.O.S.”
In the column for “Substance, material or article”, after the words “DI-(4-tert-butylcyclohexyl)
peroxydicarbonate”, insert the words “(concentration ≤ 42%, as a paste)”.
the column for “Substance, material or article”, after the words “Diisobutyryl peroxide”, insert the words
In
“(concentration ≤ 42%, as a stable dispersion in water)”.
the column for “Substance, material or article”, after the words “1-Phenylethyl hydroperoxide”, insert the
In
words “(concentration ≤ 38%, with diluent Type B)”.
the column for “Substance, material or article”, after the words “Phosphorothioic acid, o-[(cyanophenyl
In
methylene) azanyl] o,o-diethyl ester”, insert the words “(concentration 82–91% (Z isomer))”.