Standard Practice for Determining Chemical Resistance of Thermosetting
ASTM C 581 Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service Standard Specification for Contact-Molded Reinforced Thermosetting ASTM C 582 Plastic (RTP) Laminates for Corrosion-Resistant Equipment ASTM D 638 Standard Test Method for Tensile Properties of Plastics Standard Test Methods for Flexural Properties of Unreinforced and ASTM D 790 Reinforced Plastics and Electrical Insulating Materials Standard Test Methods for Density and Specific Gravity (Relative Density) ASTM D 792 of Plastics by Displacement Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant ASTM D 1598 Internal Pressure Standard Test Method for Resistance to Short-Time Hydraulic Pressure of ASTM D 1599 Plastic Pipe, Tubing, and Fittings Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” ASTM D 2105 (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube Standard Test Method for Cyclic Pressure Strength of Reinforced, ASTM D 2143 Thermosetting Plastic Pipe Standard Test Method for Apparent Hoop Tensile Strength of Plastic or ASTM D 2290 Reinforced Plastic Pipe Standard Classification for Machine-Made "Fiberglass" (Glass-hibla- ASTM D 2310 Reinforced Thermosetting-Resin) Pipe Standard Test Method for Determination of External Loading Characteristics ASTM D 2412 of Plastic Pipe by Parallel-Plate Loading Standard Test Method for Determination of the Impact Resistance of ASTM D 2444 Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) Standard Test Method for Gel Time and Peak Exothermic Temperature of ASTM D 2471 Reacting Thermosetting Resins Standard Test Method for Indentation Hardness of Rigid Plastics by Means ASTM D 2583 of a Barcol Impressor ASTM D 2584 Standard Test Method for Ignition Loss of Cured Reinforced Resins Standard Test Method for External Pressure Resistance of “Fiberglass” ASTM D 2924 (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber- ASTM D 2925 Reinforced Thermosetting Resin) Pipe Under Full Bore Flow Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for ASTM D 2992 “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber- ASTM D 2996 Reinforced Thermosetting-Resin) Pipe Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced ASTM D 3262 Thermosetting-Resin) Sewer Pipe Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced ASTM D 3517 Thermosetting-Resin) Pressure Pipe Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber- ASTM D 3567 Reinforced Thermosetting Resin) Pipe and Fittings Standard Test Method for Chemical Resistance of “Fiberglass” (Glass– ASTM D 3681 Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced ASTM D 3754 Thermosetting-Resin) Sewer and Industrial Pressure Pipe Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced ASTM D 3840 Thermosetting-Resin) Pipe Fittings for Nonpressure Applications Standard Specification for Machine Made “Fiberglass” (Glass-Fiber- ASTM D 4024 Reinforced Thermosetting Resin) Flanges Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced ASTM D 4161 Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” ASTM D 5365 (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber- ASTM D 5421 Reinforced Thermosetting Resin) Flanges Standard Specification for Fiberglass (Glass-Fiber-Reinforced ASTM D 5685 Thermosetting-Resin) Pressure Pipe Fittings Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber- ASTM D 6041 Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings AWWA Standards AWWA C950- Fiberglass pressure Pipe 01 AWWA Fiberglass pressure Design Manual M45 BS Standards Specification for glass reinforced plastics (GRP) pipes, joints and fittings for BS 5480 use for water supply or sewerage Specification for reinforced plastics pipes, fittings and joints for process BS 6464 plants Code of practice for design and construction of glass-reinforced plastics BS 7159 (GRP) piping systems for individual plants or sites ISO Standards ISO 178 Plastics -- Determination of flexural properties Plastics -- Determination of tensile properties -- Part 4: Test conditions for ISO 527-4 isotropic and orthotropic fibre-reinforced plastic composites Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings -- ISO 7370 Nominal diameters, specified diameters and standard lengths Plastics piping systems -- Glass-reinforced plastics (GRP) components -- ISO 7510 Determination of the amounts of constituents Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) ISO 7684 pipes -- Determination of the creep factor under dry conditions Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) ISO 10466 pipes -- Test method to prove the resistance to initial ring deflection Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) ISO 10928 pipes and fittings -- Methods for regression analysis and their use ISO/TR Underground installation of flexible glass-reinforced thermosetting resin 10465-1 (GRP) pipes -- Part 1: Installation procedures Underground installation of flexible glass-reinforced pipes based on ISO/TR unsaturated polyester resin (GRP-UP) -- Part 2: Comparison of static 10465-2 calculation methods Underground installation of flexible glass-reinforced pipes based on ISO/TR unsaturated polyester resin (GRP-UP) -- Part 3: Installation parameters and 10465-3 application limits Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) ISO 8521 pipes -- Test methods for the determination of the apparent initial circumferential tensile strength Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) EN 705:1997 pipes and fittings - Methods for regression analyses and their use Plastics piping systems for underground drainage and sewerage under EN 1115- pressure. Glass-reinforced thermosetting plastics (GRP) based on 1:1999 unsaturated polyester resin (UP). General Plastics piping systems for underground drainage and sewerage under EN 1115- pressure. Glass-reinforced thermosetting plastics (GRP) based on 2:1999 unsaturated polyester resin (UP)- part2: pipes with flexible, reduced articulation or rigid points. Plastics piping systems for underground drainage and sewerage under EN 1115- pressure. Glass-reinforced thermosetting plastics (GRP) based on 3:1999 unsaturated polyester resin (UP)- part3: fittings Plastics piping systems for underground drainage and sewerage under EN 1115- pressure. Glass-reinforced thermosetting plastics (GRP) based on 5:1999 unsaturated polyester resin (UP)- part5: fitness for purpose of the joints Plastics piping systems for underground drainage and sewerage under EN 1115- pressure. Glass-reinforced thermosetting plastics (GRP) based on 6:1999 unsaturated polyester resin (UP)- part6: practice for installation Plastics piping systems for underground drainage and sewerage under EN 1115- pressure. Glass-reinforced thermosetting plastics (GRP) based on 7:1999 unsaturated polyester resin (UP)- part7: assessment of conformity Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) EN 1120:1997 pipes and fittings – determination of the resistance to chemical attack from inside of a section in a deflect condition Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) EN 1125:1997 pipes and fittings - determination of the creep factor under wet conditions and calculation long- term specific ring stiffness Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) EN 1127:1999 pipes and fittings - determination of the long- term ultimate relative ring deflection under wet conditions Structural design of buried pipelines under various conditions of loading- EN 1195:1998 part1: general requirements Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) EN 1447:1997 pipes and fittings - determination of long- term resistance to internal pressure Plastics piping systems for non-pressure drainage and sewerage- Glass- EN 1636- reinforced thermosetting plastics (GRP) based on unsaturated polyester resin 2:1996 (up)-part 2: pipes with flexible, reduced articulation or rigid joints Plastics piping systems for non-pressure drainage and sewerage- Glass- EN 1636- reinforced thermosetting plastics (GRP) based on unsaturated polyester resin 3:1999 (up)-part 2: fittings Plastics piping systems for non-pressure drainage and sewerage- Glass- EN 1636- reinforced thermosetting plastics (GRP) based on unsaturated polyester resin 5:1999 (up)-part 5: fitness for purpose of the joints Plastics piping systems for water supply with or without pressure-glass- EN 1796 reinforced thermosetting plastic (GRP) based on unsaturated polyester resin (up) EN ISO/IEC General requirements for the competence of testing and calibration 17025:2005 laboratories Note: the equipment and services specified in this offer don’t cover the execution of all tests specified in above standards.