Professional Documents
Culture Documents
2.
Explain the various levels of automation with suitable examples.
6. What is industrial control? Write a note on process industry and discrete manufacturing
industry.
Write a part programto performthe Square Pocket Milling operation on a workpiece of dimensions
7.
100mm×100mm×10 mm. The pocket’s dimension is 57mm×57mm×8mmand is located at the
centre of the workpiece. Use a cutter diameter of 10 mm. Take program zero at the top face center
of the workpiece.
8.
Write a part programto performthe square slab milling operation on a workpiece of dimensions
100mm×100mm×10 mm. The slab’s dimension is 64mm×64mm×6mmand is located at the centre
of the workpiece. Use a cutter diameter of 10 mm. Take program zero at the left bottom end of the
workpiece.