Professional Documents
Culture Documents
Sentinel Dual SDU: 4 kVA 5-10 kVA/kW 8-10 kVA/kW
Sentinel Dual SDU: 4 kVA 5-10 kVA/kW 8-10 kVA/kW
SDU
6
VFI
TYPE
ONLINE ToweRack
1:1 4 kVA
5-10 kVA/kW
3:1 8-10 kVA/kW
Sentinel Dual is the best solution for which supplies a sinusoidal voltage, filtered
HIGHLIGHTS powering mission critical applications and and stabilised in terms of voltage, form
electro-medical devices requiring maximum and frequency. In addition, the input and
• Power factor power reliability. output filters significantly increase the load’s
Flexibility of installation and use (digital immunity to mains disturbances and lightning
1 kW = kVA* display, user-replaceable battery set), as well strikes.
as the many communication options available, Technology and performance: selectable
• Parallelable up to 3 unit makes the Sentinel Dual suitable for many Eco Mode and Smart Active Mode functions.
different applications from IT to security. Diagnostics: Standard digital display, RS232
• Simplified installation Up to 3 Sentinel Dual can be operated in and USB interfaces with PowerShield3
parallel in either capacity or N+1 redundant software downloadable, communications slot
• Operating mode configuration offering increased reliability for connectivity accessories.
90°
90°
• Low noise (<45 dBA): can be installed High battery reliability Other features
in any environment thanks to its high • Automatic and manual battery test • Selectable output voltage (220-230-240 V)
frequency switching inverter and PWM • Reduced ripple component (detrimental • Dual input supplies configuration (SDU
load-dependent digitally controlled fan to the batteries) using a low ripple current 10000 DI and SDU 10000 DI ER)
• External bypass option for maintenance discharge (LCRD) system • Auto-restart when mains power is restored
with interruption-free switching • Batteries are user replaceable without (programmable via software)
• Operation guaranteed up to 40°C (the switching off equipment and without • Bypass on: when the machine is switched
components are designed for high interruption to the load (Hot Swap) off, it automatically goes into bypass and
temperatures and are thus subject to less • Unlimited extendible runtime using battery charge mode
stress at normal temperatures) matching Battery Boxes • Minimum load switch-off
• Built-in IEC output sockets with thermal • The batteries do not cut in during mains • Low battery warning
protection. failures of <20 ms (high hold up time) or • Start-up delay
when the input supply is between 184 V to • Total microprocessor and DSP control
Operating mode selection 276 V. • Automatic bypass without interruption
Functions can be programmed via software or • Use of custom power modules
manually via the front display panel. Emergency function • Status, measurements and alarms available
• On line: efficiency up to 95% This configuration ensures the operation on standard backlit display
• Eco Mode: to increase efficiency (up to of those emergency systems that require • UPS digital updating (flash memory
to 98%), allows for the selection of Line continuous, reliable and long-lasting power upgradeable)
Interactive technology (VI) to power low supply in the event of a mains power failure, • Output sockets protected with resettable
priority loads from the mains supply such as emergency lighting, fire detection/ thermal switch
• Smart Active: the UPS automatically extinguishing systems and alarms. When the • Back-feed protection standard: to prevent
decides upon the operating mode (VI or VFI) mains power supply fails, the inverter begins energy from being fed back to the network
based on the quality of the mains power powering the loads with a progressive start- • Manual switching to bypass.
supply up (Soft Start) in order to prevent overload.
• Emergency: the UPS can be selected to Advanced communications
function only when the mains power supply Battery optimisation • Advanced multi-platform communications
fails (emergency only mode). The wide input voltage range and a high hold- for all operating systems and network
• Frequency converter operation (50 or up time minimise battery usage and increase environments: PowerShield3 monitoring and
60 Hz). efficiency and battery life; for smaller power shutdown software for Windows operating
breaks, energy is drawn from a group of systems 10, 8, 7, Hyper-V, 2019, 2016,
High quality output voltage appropriately-sized capacitors. 2012, and previous versions, Mac OS X,
• Even with non-linear loads (IT loads with a Linux, VMWare ESXi, Citrix XenServer and
crest factor of up to 3:1) Runtime expandability other Unix operating systems
• High short circuit current on bypass Optional battery extension packs can be • Plug and play function
• High overload capacity: 150% by inverter connected to increase UPS runtime. In • USB port
(even with mains failure) addition the Sentinel Dual range includes ER • RS232 serial port
• Filtered, stabilised and reliable voltage versions with no internal batteries and more • Slot for installation of communications
(double conversion on-line technology powerful battery chargers for longer runtimes. boards.
(VFI compliant with EN62040-3), with
filters for the suppression of atmospheric EnergyShare Unity Power Factor*
disturbances. 10 A configurable IEC output sockets allow • More power delivered
• Power factor correction: UPS input power for runtime optimisation by programming the • More real output power (W)
factor close to 1 and sinusoidal current switching off of low priority loads on mains
uptake. failure; alternatively, emergency loads that 2-YEAR WARRANTY
are normally not powered when mains is
present can be activated.
ACCESSORIES
NETMAN 204
MULTICOM 302
3U
3U
3U
3U
Dimensions
BB BB MULTICOM 352
448
448
(mm)
1320
1320
448
19
” 64
0 19
” 19
”
0
64 64
0 19
” MULTICOM
64
0 372
40 0 64
0 MULTICOM 384
13 13 6 64 13 5 5
1 401 81 4 81
1 0 MULTICOM 411 00
MULTI I/O
MULTIPANEL
PRODUCT ACCESSORIES
Universal rails for installation
in rack cabinets
Parallel card*
Distribution Box
*not suitable for SDU 4000
DETAILS
SDU 4000 SDU 5000 SDU 5000 PDIST
SDU 6000 SDU 6000 PDIST / SDU 6000 ER*
COMMUNICATIONS SLOT
PARALLEL CARD
(OPTION) PARALLEL CARD
REMOTE CONTROL (OPTION)
TERMINAL BOARD
INPUT CABLE
INPUT / OUTPUT ACCESS
TERMINAL STRIP
IEC 16 A OUTPUT
SOCKET WITH
CIRCUIT BREAKER
BATTERY EXPANSION
CONNECTOR
SERIAL PORT
COMMUNICATIONS
USB PORT SLOT
REPO
CONNECTOR
PARALLEL CARD
(OPTION)
INPUT CABLE
ACCESS
*BYPASS CABLE
ACCESS
* DI = DUAL INPUT
OUTPUT CABLE ER =EXTENDED RECHARGE
ACCESS
SDU 5000 SDU 6000 SDU
SDU 6000 SDU SDU SDU 8000 SDU
MODELS SDU 4000 SDU 5000 SDU 6000 SDU 8000 10000 DI
ER 10000 10000 DI TM 10000 TM
PDIST PDIST ER
INPUT
Dual Input no yes no
380 - 400 - 415 Vac
(3W+N+PE)
Nominal voltage 220-230-240 Vac
220 - 230 - 240 Vac
(1W+N+PE)
400 Vac ± 20%
Voltage tolerance 230 Vac ± 20%
230 Vac ± 20%
Minimum voltage 184 Vac 318 Vac / 184 Vac
Nominal frequency 50/60 Hz ±5Hz
Power factor > 0.98
Current distortion ≤5%
BYPASS
The information in this document is subject to change without notice. Riello UPS assumes no responsibility for any errors that may appear in this document.
Voltage tolerance 180 - 264 Vac (selectable in Eco Mode or Smart Active Mode)
Frequency tolerance Selected frequency ±5% (selectable by user)
Overload Times < 110% continuous, 130% for 1 hour, 150% for 10 minutes, over 150% for 3 seconds
OUTPUT
Nominal power (VA) 4000 5000 6000 6000 8000 10000 10000 10000 8000 10000
Active power (W) 3600 5000 6000 6000 8000 10000 10000 10000 8000 10000
Nominal voltage 220-230-240 Vac selectable
Voltage distortion < 1% with linear load / < 3% with non-linear load
Frequency 50/60 Hz selectable
Static variation 1.5%
Dynamic variation ≤ 5% in 20 ms
Waveform Sinusoidal
Crest factor 3:1
BATTERIES
Type VRLA AGM maintenance-free lead based
Recharge time 4-6 hours
OTHER FEATURES
Net weight (kg) 38 45 46 20 19+53 20+62 21 19+53 20+62
Gross weight (kg) 43 53 54 28 83 93 25 83 93
131 x 640 x 448 tower 2 x (131 x 640 x 448) tower - 2 x (19” x 640 x 3U) rack
Dimensions (WxDxH) (mm)
19” x 640 x 3U rack ER version (131 x 640 x 448) tower - (19” x 640 x 3U) rack
Packaged dimensions 2 x (780 x 555 x 270) + H 15
780 x 555 x (270+15)
(WxDxH) (mm) ER version (780 x 555 x (270+15)
Efficiency up to 95% on line mode, 98% eco mode
Protections Overcurrent - short-circuit - overvoltage - undervoltage - temperature - excessive low battery
Parallel Operation no Optional Parallel Card
Communications USB / RS232 / slot for communications interface / REPO + Input contact
Input Connection Terminal block
Terminal
block Terminal block + 2 IEC 320 C19
+ 2 IEC
Output sockets PDIST: Terminal block + 8 IEC 320 Terminal block + 2 IEC 320 C13 + 3 IEC 320 C19
320 C13
+ 1 IEC C13 + 2 IEC 320 C19
320 C19
DATSDUA1Y19DREN
RPS SpA - Riello Power Solutions - Member of the Riello Elettronica Group
RIELLO ELETTRONICA