DETAILED DESIGN FOR BLACK POWDER FILTRATION UNIT FOR
GTP SKID FOUNDATION CALCULATION NOTE CONTRACTOR Document N°: COMPANY Document N°: Rev: 000 55367-OMV-CV-CA-001 NAWGTP-AEI-PF02-220-CV-CLN-00001 Page : 5 of 20
1. SCOPE
This document presents the check done for the black powder filter foundation stability and the calculation for reinforcement.
2. CODES AND STANDARDS
The design codes used for this calculation are as follows:
EN 1991-1-1 :2002 : Eurocode 1 : Actions on structures – Part 1-1 : General Actions – Densities, self-weight, imposed loads for buildings
EN 1991-1-2 :2002 : Eurocode 1 : Actions on structures – Part 1-2 : General
Actions – Actions on structures exposed to fire
EN 1991-1-3 :2003 : Eurocode 1 : Actions on structures – Part 1-3 : General
Actions – Snow Loads
EN 1991-1-4 :2005 : Eurocode 1 : Actions on structures – Part 1-4 : General
Actions – Wind actions
EN 1991-1-5 :2003 : Eurocode 1 : Actions on structures – Part 1-5 : General
Actions – Thermal actions
EN 1991-1-6 :2005 : Eurocode 1 : Actions on structures – Part 1-6 : General
Actions – AAccidental actions
EN 1991-3 :2006 : Eurocode 1 : Actions on structures – Part 3: General
Actions – Actions included by cranes and machinery
EN 1991-4 :2006 : Eurocode 1 : Actions on structures – Part 4 : Silos and
tanks
ALPHA ENGINEERING Intl.
Sahloul III - 4054 Sousse – Tunisia Code TVA : 950448R/A/M/000. R.C : B279902006 Tél : +216 73 821 245 / 246 / 247 Fax : +216 73 821 249 This document is the property of Alpha Engineering International who will safeguard its rights according to the civil and penal provisions of the Law.