Professional Documents
Culture Documents
Endplate
End seal
LM rail
Grease nipple
Ball
The flange of its LM block Having a smaller LM block
has tapped holes. width (W) and tapped
Side seal Can be mounted from the holes, this model is optimal
top or the bottom. for compact design.
4-S B L1
( φ H through)
C
φ d2
N
T1 T
M (K) h
M1
H3
φ d1
W2 W1 G F g
Unit:mm
Outer dimensions LM block dimensions
Mass
Model No. Height Width Length Grease H3
W2 B C S H L1 T T1 K N E kg
M W L nipple
HSV15C 24 47 56.6 16 38 30 M5 4.4 38.8 6.9 11 19.8 4.3 5.5 PB1021B 4.2 0.2
HSV20C 30 63 74 21.5 53 40 M6 5.4 50.8 10 10 25 5 12 B-M6F 5 0.35
HSV25C 36 70 83.1 23.5 57 45 M8 6.8 59.5 10 16 29.5 6 12 B-M6F 6.5 0.59
HSV30C 42 90 98 31 72 52 M10 8.5 70.4 10 18 34 7 12 B-M6F 8 1.1
HSV35C 48 100 109.4 33 82 62 M10 8.5 80.4 13 21 38.6 8 12 B-M6F 9.4 1.6
HSV45C 60 120 139 37.5 100 80 M12 10.5 98 15 25 48.5 10 16 B-R1/8 11.5 2.8
■ Model HSV-R
W (E)
4-S×ℓ L
B L1
C
φ d2
T N
M (K)
h
M1
H3
φ d1
W2 W1 g
G F
Unit:mm
Outer dimensions LM block dimensions
Mass
Model No. Height Width Length Grease H3
W2 B C S×ℓ L1 T K N E kg
M W L nipple
HSV15R 28 34 56.6 9.5 26 26 M4×5 38.8 6 23.8 8.3 5.5 PB1021B 4.2 0.18
HSV20R 30 44 74 12 32 36 M5×6 50.8 8 25 5 12 B-M6F 5 0.25
HSV25R 40 48 83.1 12.5 35 35 M6×8 59.5 9 33.5 10 12 B-M6F 6.5 0.54
HSV30R 45 60 98 16 40 40 M8×10 70.4 9 37 10 12 B-M6F 8 0.9
HSV35R 55 70 109.4 18 50 50 M8×12 80.4 12 45.6 15 12 B-M6F 9.4 1.5
HSV45R 70 86 139 20.5 60 60 M10×17 98 15 58.5 20 16 B-R1/8 11.5 2.6
CAP C (Option) The correspondence of the options, please contact your dealer.
If any of the LM rail mounting holes of an LM Guide is filled with cutting chips or foreign material, they may enter the
LM block structure.
Entrance of such foreign material can be prevented by convering watch LM rail mounting hole with the dedicated cap.
D
QZ Lubricator (Option)
QZ Lubricator feeds the right amount of lubricant to the raceway on the LM rail. This allows an oil film to continuously be
formed between the rolling element and the raceway, and drastically extends the lubrication and maintenance intervals.
Dealer
A.T.T.I. Srl
Via Flli Cervi, 3 - 20063 Cernusco sul Naviglio (MI)
Tel. 0292106954 / Fax 0292107261
info@atti.it / www.atti.it