Professional Documents
Culture Documents
1. Open the Sample Program folder in the AL1020, AY1020 or AL1x2x setup packages to find
Tags and Logic Comments Folder.
2. Open the Tag and Logic Comments folder to find the .CSV file and import instructions
Importing Tag Descriptions
3
4. The .CSV file has been saved with the following Ethernet Module names:
AL1x2x – “A1x2x_IOLink”
AL1020 – “AL1020_IOLink”
AY1020 – “AY1020_IOLink”
Note: In order to import the CSV file to RSLogix/Designer the name of the Ethernet
Module must match the name given in the PLC program.
Importing Tag Descriptions
5
5. Find the Ethernet Module’s name in the PLC by right clicking on the created Ethernet
Module and clicking Properties.
6. Copy the Name
Importing Tag Descriptions
6
12. When offline with the PLC go to Tools-Import-Tags and Logic Comments…
Importing Tag Descriptions
9
13. Follow the prompts to find the saved file and click “Import” to start the import process.
Importing Tag Descriptions
10
If the tags were imported correctly no errors will occur and the descriptions will be
written to the Controller Tags