Professional Documents
Culture Documents
Readme File For The Hewlett
Readme File For The Hewlett
HP DesignJet 220
HP DesignJet 230
HP DesignJet 250C
HP DesignJet 330
HP DesignJet 350C
HP DesignJet 430
HP DesignJet 450C
HP DesignJet 455CA
HP DesignJet 488CA
HP DesignJet 600
HP DesignJet 650C
HP DesignJet 700
HP DesignJet 750C
HP DesignJet 755CM
HP DesignJet 1050C
HP DesignJet 1055CM
HP DesignJet 2000CP
HP DesignJet 2500CP
HP DesignJet 3000CP
HP DesignJet 3500CP
of this file
item, you should always take care when it is used to set a large
generate an error message telling you that the scaled paper size
is too large for your printer and that scaling will be disabled.
several times. After the final error message your drawing will be
printed according to the Page Setup settings and with the Scaling
setting disabled.
Internet Links from the Driver's Help File
The driver's help file contains some useful links for users with
access to the Internet. If you use Windows 3.1, you will see the
links. Under Windows 95/98, you can normally link from the help
useful information.
printed, and the device will request more media. To solve the
For really complex drawings you may also need to change the
INSTALLATION INSTRUCTIONS
applications.
Insert the CD-ROM into the CD-ROM drive and follow the
process, you can install the driver from the CD-ROM by following
these steps:
dialog box.
Wizard dialog box. (We recommend that you do not use the New
system configuration.
Select:
on another computer.
another computer. In this case, all settings for the printer are
administrator.
driver on the CD-ROM (the same folder as this ReadMe file) and
click OK. Select your HP DesignJet printer from the list and click
Next.
"Would you like to keep the existing driver or use the new one?"
If you are installing files for a new version and you see this
We recommend that you select No. Select Yes only in the case where
printer.
printer, you can also install the Toolbox. You need to have an HP
first install the HP-GL/2 driver. Then run the following program
E:\toolbox\<lang>\<OS>\Disk1\hplsetup.exe
version.
box.
12. In the Printers - Connect dialog box, click the desired port.
13. In the Printers - Connect dialog box, change both the Device
2. Type
win e:\hpgl2\<lang>\win31\install
to two letters: "en", "fr", "ge", "it", "ja", "ko", "sc", "sp",
"tc".
no-cost, sharing basis. You may distribute and copy this Software