Professional Documents
Culture Documents
Datasheet PDF
Datasheet PDF
FEATURES
z High ou tput power
Stereo: Po=2.3W (Typ) at Vcc=9V, R L =4 Ω
Bridge: Po=4.7W (Typ) at Vcc=9V, R L =8 Ω
z Low switching distortion at high frequency.
z Small shock noise at th e time of power on/off due to a built-in mu ting circuit
z Good ripple rejection due to a built-in ripple filter.
z Good ch annel separation.
z Soft tone at the time of output saturation.
z Closed loop voltage gain fixed 45 d B (Bridge: 51dB) but availability with external
resistor added.
z Minimu m nu mb er of external parts required.
z Easy to design radiator fin.
-
SHOCK NOISE
INPUT OUT
REJECTOR AMP 1 AMP 1
+
RIPPLE FILTER
-
INPUT OUT
AMP 2 AMP 2
+
6 5 4 Fin 3 2 1
R.R IN2 NF2 POWER GND BS2 OUT2 BTL OUT
ELECTRICAL CHARACTERISTICS
(unless otherwise specified: Ta=2 5°C, Vcc=9V; Rg=6 00 Ω,f=1kHz)
Characteristics Test conditions Symbol Min. Typ. Max. Unit
Operating Supply Vo ltage Vcc 9 11 V
Quiescent circuit current Vi=0V, Stereo ICCQ 40 55 mA
Stereo Vi=-45dBm 43 45 47 dB
Closed loop Vo ltage Gain Gvc
Bridge 49 51 53 dB
Channel Balance Stereo CB -1 0 +1 dB
THD=10%, R L =4Ω 1.7 2.3
Stereo
Output Power THD=10%, R L =8 Ω Po 1.3 W
Bridge THD=10%, R L =8 Ω 4.7
Total Harmonic Stereo Po=250 mW 0.3 1.5
THD %
Distortion Bridge R L =4 Ω 0.5
Input Resistance Ri 21 30 kΩ
Stereo, Rg =0Ω,
Ripple Rejection Ratio RR 40 46 dB
Vi=150mW f=100Hz
Stereo Rg=0Ω 0.3 1.0
Output Noise Vo ltage VNO mV
Stereo Rg=10kΩ 0.5 2.0
Cross Talk Stereo Rg=10kΩ Vo =0d B m CT 40 55 dB
0.15uF
1000uF
470uF
7 8 9 Fin 10 11 12
CD2025B
RL
6 5 4 Fin 3 2 1
470uF
100uF
0.15uF
100uF 100uF
APPLICATION INFORMATION
1. Stereo application
(1) Fixed Vo ltag e gain
8 + (Pin 9 connected to GND directly )
CH1 11 Gv=20 log( R1/R2)
R2
9 -
R1 (2) Variable voltage gain
Rf
(Rf and C, Connected with pin 9)
C1 Gv=20 log (R1/(R2+Rf)
2.Bridge application
INPUT
8 + + 5
CH1 CH2 R3
R2
9 - - 4
R1 R4
Rf
5K C2
C1 1
10K
11 2
C4 RL C6