Professional Documents
Culture Documents
V2 2/28/2018
DRILLING DEPTH
GUIDELINES
Drill Rod Hole Depth (metric)
Up Horizontal
ARQTK 500 500
BQ 360 500
NQ 210 500
HQ 90 290
Note: Depth capacity includes allowance for force required to break core using 5 MPa rock strength. The
figures in this table has been calculated based on field experiences and may be reasonably expected. Actual
drilling capacity will depend on in-hole tools, conditions, drilling techniques and equipment used.
DRILL
SPECIFICATION
Metric
Feed Frame (400 Series)
Feed Stroke 1700 mm
Automatic
Automatic synchronization synchronization
2 with tungsten
Jaws 3 with tungsten carbide inserts carbide inserts
Max. rated axial holding Forward and
capacity Forward and reverse rotation reverse rotation
60.0 kN* (13,300
75.0 kN* (16,600 lbf*) lbf*)
1680 RPM, continuously variable. Speeds will vary with oil type and
Chuck Speed temperature are only approximate
Chuck torque output 800 N-m @ stall
Reverse Rotation
80 RPM, fixed to help prevent rod
Chuck Speed thread damage
Chuck torque output 1825 N-m
HQ™ Drill Head, HI Torque
Forward Rotation
1330 RPM, continuously variable. Speeds will vary with oil type and
Chuck Speed temperature are only approximate
HYDROSTATIC
PUMPS
Main Pump
CE
CERTIFICATION
The CE marking certifies that a product meets EU consumer safety, health or environmental requirements.
POWER PACK
Metric
Power 55 kW
WEIGHT
Metric
Feed frame 650 kg
Rotation Unit w/chuck 235 kg
HQ™ Rod Clamp Assembly 75 kg
Control Panel w/o hoses 46 kg
Hoses 42 kg
Power Pack 1,400 kg
Hole Depth
(feet)
Down Up Horizontal Down
500 1640 1640 1640
500 1190 1640 1640 Disclaimer: Though Boart Longyear makes certain
410 700 1640 1340 efforts to ensure that the requirements, measurements
210 310 950 710 specifications and other data (“Data”) made available
on our site are reasonably accurate and reliable for
their intended purposes at the time they are posted,
such data is not guaranteed and may be subject to
other terms and conditions.
g 5 MPa rock strength. The
reasonably expected. Actual
es and equipment used.
U.S.
5.6 ft
9440 lbf @ 3770
psi
9060 lbf @ 3770
psi
1.64 ft/s per
complete cycle
Approximately 50
ft/minute
ual load holding valves
HQ™ Rod
HQ™ Chuck Holder
97.0 mm (3.82
97.0 mm (3.82 in) in) Diameter
Diameter corresponding
corresponding to to the ID of the
the ID of the HQ™ guide
HQ™ guide bush bush
Closed Closed
hydraulically mechanically
Opened Opened
mechanically hydraulically
Automatic Automatic
synchronization synchronization
with chuck
Manual
with rod holder overdrive
Forward and
Forward and reverse
reverse rotation rotation
3900 N-m (2870 3900 N-m
lbf*) (2870 lbf*)
U.S.
1350 lb-ft
will vary with oil type and
oximate
2615 lb-ft
1015 lb
14.5-21.8 PSI
15.8 US Gal.
nvironmental requirements.
U.S.
74 hp
U.S.
1,430 lbs
517 lbs
165 lbs
101 lbs
92 lbs
3,080 kg
Boart Longyear makes certain
the requirements, measurements,
her data (“Data”) made available
onably accurate and reliable for
oses at the time they are posted,
aranteed and may be subject to
rms and conditions.
LM™55
WIRELINE HOIST
Variable speed hydraulically driven c/w 500 m (1,640 ft) cable
SHEAVE/COVER
ASSEMBLY
Sheave Assembly Wireline - 1.7m feed frame
Cover Assembly 1.1m feed frame - Wireline
Cover Assembly 1.1m feed frame - Conventional
GUARD ASSEMBLY
1.7M Feed Frame
1.1M Feed Frame
HYDRAULIC
HOSES
Options Descriptions
4.8 MPa (700 psi) max discharge pressure with relief valve
fitted as standard
HYDRAULIC
HOSE HOOKS
Hooks that allow hydraulic hoses to be wrapped around the power pack. 6 hooks in a set.
FLUORESCENT
LIGHTS
2 x Fluorescent lights. Plugs into low voltage outlet on the starter
START AND STOP
OPTIONS
Allows start and stop of electric motor from control panel or other location
ROD HANDLER
Designed with safety in mind the semi automated rod handler has been operating on Boart
Longyear™ underground diamond drills. The rod handler reduces operator fatigue,
Occupational Health and Safety liabilities and can improve productivity.
Load rods at the same comfortable height every time independent of drilling angle.
Reduces the possibility of hand and back injuries.
Overcomes the need for work platforms - Increases productivity particularly on deep large
diameter holes.
Easily retro-fitted.
Automated Rod Threading.