Time: 45min P.M.:6 Attempt all of them.(3*5=15) 1. a)Define FET. Explain the construction of N-channel JFET in brief. b) For an N-channel JFET IDSS=8.7mA; VP= -3V ; VGS= -1V.Find the values of i)ID ii)gmo iii)gm 2. a)A temperature sensor has a measurement range of -10 to 150 oC. The output range is -1.5 to ……… …….+5mv.It has a resolution of 0.1oC. i) Determine the number of bits in ADC? ii) What is the reading of the ADC when the output of the sensor is +5 mv? b)Derive the relation of Vout for binary weighted DAC.Convert binary input of 1101 into …… ………analog output (Vout) using binary weighted DAC.Assume Vref=+5V. 3. a) Derive the relation of voltage gain and feedback resistance for inverting op-amp with figure. b) An op-amp has feedback resistor Rf=12kohm and the resistances on the input sides are ….. ………RS1=12 kohm, RS2 =2 kohm and RS3=3 kohm.The corresponding inputs are Vi1=+9V, …….. ………Vi2= -3V and Vi3= -1V.If non-inverting terminal is grounded.Calculate the output voltage.
Kathmandu University, Dhulikhel
Department of Mechanical Engineering Second Internal Exam 2016
Basic Electronics (EEEG 201) F.M.:15
Time: 45min P.M.:6 Attempt all of them.(3*5=15) 2. a)Define FET. Explain the construction of N-channel JFET in brief. b) For an N-channel JFET IDSS=8.7mA; VP= -3V ; VGS= -1V.Find the values of i)ID ii)gmo iii)gm 2. a)A temperature sensor has a measurement range of -10 to 150 oC. The output range is -1.5 to ……… …….+5mv.It has a resolution of 0.1oC. i) Determine the number of bits in ADC? ii) What is the reading of the ADC when the output of the sensor is +5 mv? b)Derive the relation of Vout for binary weighted DAC.Convert binary input of 1101 into …… ………analog output (Vout) using binary weighted DAC.Assume Vref=+5V. 3. a) Derive the relation of voltage gain and feedback resistance for inverting op-amp with figure. b) An op-amp has feedback resistor Rf=12kohm and the resistances on the input sides are ….. ………RS1=12 kohm, RS2 =2 kohm and RS3=3 kohm.The corresponding inputs are Vi1=+9V, …….. ………Vi2= -3V and Vi3= -1V.If non-inverting terminal is grounded.Calculate the output voltage.