Professional Documents
Culture Documents
Lo
s
Disc springs are divided into three groups: t
ho
• Group 1: Springs with a thickness (t) < 1.25 mm have De
not been chamfered on inner or outer diame-
Group 1 and Group 2 springs
ters.
• Group 2: Springs with a thickness (t) from 1.25 up to 6.0
mm are chamfered on inner and outer diame-
ters. Di
Lo
s
chamfered on all sides. In addition, all contact t
ho
surfaces are ground flat.
De
Group 3 springs
Stock
Disc springs up to De < 150 are kept in stock.
120
DISC SPRING
SF-TAF, DIN 2093
Diametrical 4F
Di and De mm play mm
<16 0,2
>16–20 0,3 3F
>20–26 0,4
Spring force
>26–31,5 0,5
2F
>31,5–50 0,6
>50–80 0,8
>80–140 1,0
F
>140–150 1,6
>250 2,0
s 2s 3s 4s
Deflection
1,1 3F
1,0
0,9 A B
ho/t = 1,5
o
0,8
Spring force F/Fs=h
1,0 2F
0,7
Spring force
0,4
0,6
0
0,5 C
0,4 F
0,3
0,2
0,1
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1,0 s 2s 3s 4s
Tolerance Tolerance
Thickness Thickness Free height Thickness Tolerance at
Group (t / t1) mm (t ) mm (Lo) mm Group (t / t1) mm s = 0.75 ho %
1 0,2–0,6 +0,02 / -0,06 +0,10 / -0,05 1 <1,25 +25 / -7,5
1 >0,6–<1,25 +0,03 / -0,09 +0,10 / -0,05 2 1,25–3,0 +15 / -7,5
2 1,25–2,0 +0,04 / -0,12 +0,15 / -0,08 2 >3,0–6,0 +10 / -5
2 >2,0–3,0 +0,04 / -0,12 +0,20 / -0,10 3 >6,0–15 ±5
2 >3,0–3,8 +0,04 / -0,12 +0,30 / -0,15
2 >3,8–6,0 +0,04 / -0,12 +0,30 / -0,15
3 >6,0–15 ±0,10 ±0,30
3 >15–25 ±0,12 ±0,50*
3 >25–40 ±0,15 ±1,00*
122
DISC SPRING
SF-TAF, DIN 2093
123
DISC SPRING
SF-TAF, DIN 2093
125
DISC SPRING
SF-TAF, DIN 2093
126
DISC SPRING
SF-TAF, DIN 2093
127
DISC SPRING
SF-TAF, DIN 2093
129
DISC SPRING
SF-TAF Low force
The dimensions are adapted to standard ball bearings All dimensions are in mm
and are used primarily for eliminating axial play. Normally, s = Deflection
they are fitted with the outer diameter against the outer
F = Spring force in Newtons
ring of the bearing. These springs produce a relatively low
force and can of course also be used in other designs. In Material: CK 67
addition to the dimensions listed below, we can also sup- 1 kp = 9.80665 Newtons, 1 Newton = 0.10197 kp
ply springs with an outer diameter of up to 358 mm upon
request.