Professional Documents
Culture Documents
1. The most efficient solution of heat supply at low and medium temperature is:
a. Using a fuel that is directly combusted in the energy consuming equipment.
b. Using heat in different forms produced by a centralized heat generating facility
(boiler house/thermal plant or cogeneration plant).
c. Using electricity.
2. The most consumers of heat at low or medium temperature are supplied with heat using as
energy carrier:
a. Water in different forms.
b. Compressed air.
c. Flue gasses.
3. Adding thermal insulation for a boiler is:
a. No-cost measure.
b. Low-cost measure.
c. High-cost measure.
4. Recovering heat from waste steam within heating and cooling equipment is:
a. No-cost measure.
b. Low-cost measure.
c. High-cost measure.
5. Adjusting airflow rates to suit changing occupancy conditions and use of building space
within heating, ventilation and air-conditioning system is:
a. No-cost measure.
b. Low-cost measure.
c. High-cost measure.
6. Installation of variable speed drivers within refrigeration system is:
a. No-cost measure.
b. Low-cost measure.
c. High-cost measure.
7. Using intake air from the coolest location for compressed air system is:
a. No-cost measure.
b. Low-cost measure.
c. High-cost measure.
8. Analyzing the possibility of utilization of supplementary fuels for kiln furnace operation is:
a. No-cost measure.
b. Low-cost measure.
c. High-cost measure.
9. Increasing window area:
a. Increases heat demand for heating.
b. Decreases heat demand for heating.
c. Heat demand for heating remains constant.
10. Cogeneration is:
a. Combined and simultaneous production of heat and power.
b. Combined and simultaneous production of steam and hot water.
c. Combined and simultaneous production of power and mechanical work.