Professional Documents
Culture Documents
U9000 Datasheet 2019 A4 EUMP MG204 16-0001 (1) Low PDF
U9000 Datasheet 2019 A4 EUMP MG204 16-0001 (1) Low PDF
INDICATIONS PERFORMANCES
The U9000 ultrafilter is indicated for purification of incoming water for dialysis Typical pressure drop
fluid as well as purification of dialysis fluid to obtain microbiological high quality
QF = 500 ml/min – dialysis fluid
dialysis fluid. The risk of exposure to bacteria and endotoxins can thereby
at temperature = 37°C < 100 mmHg
be minimized.
The U9000 ultrafilter is intended to be used in conjunction with a water
Lifetime
treatment system.
On the AK98 V2, V3 and Artis dialysis system:
The U9000 ultrafilter shall be changed after 3 months of usage or 150 disinfection
cycles, whichever comes first
MATERIALS
On the AK 96 and AK 98 V1 dialysis system:
Membrane PAES/PVP The U9000 ultrafilter shall be changed after 2 months of usage or 100 disinfection
Potting material Polyurethane (PUR) cycles, whichever comes first
Housing and caps Polycarbonate (PC) Maximum 12 disinfections with sodium hypochlorite over the lifetime of the U9000
Gasket Silicone rubber Maximum 8 disinfections with sodium carbonate over the lifetime of the U9000
For safe and proper use of the device, please refer to the Instructions for Use
2797
renalcare.baxter.com
Baxter Healthcare Corporation
One Baxter Parkway
Deerfield, IL 60015
Baxter, AK 96, AK 98, Artis and U9000 are trademarks USA
of Baxter International Inc. or its subsidiaries EUMP/MG204/16-0001(1) – September 2019 1-800-422-9837