You are on page 1of 1

ETAP Knowledge Base

Bus Gap distance and Distance X Sources in Arc Flash

Description: This document gives the source of the bus gap distance in the bus rating page
for use with the Arc Flash model
Category: Arc Flash
Type: Modeling
Keywords: Arc Flash, bus gap, bus, gap, switch gear, switch rack, panelboard, MCC, switch
board, cable bus, open air

Q: What is the source of the gap and distance X in the bus rating page?

A: IEEE 1584-2002 pg. 12.

This document is confidential and proprietary to Operation Technology, Inc. and may not be reproduced, published or disclosed to
others without the written authorization of Operation Technology, Inc., 17 Goodyear, Suite 100, Irvine, CA 92618, USA. © 2010 by
Operation Technology, Inc. All Rights Reserved.

© Operation Technology, Inc. Page 1 of 1 ETAPKB

You might also like