Professional Documents
Culture Documents
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B1563; Haptic Device Disconnected; 2015 2016 MY IS200T
IS250 IS300 IS350 [06/2014 ]
DESCRIPTION
The radio receiver assembly and remote operation board are connected by the AVCLAN communication line.
This DTC is stored when an AVCLAN communication error occurs between the radio receiver assembly and remote
operation board.
Remote operation board power
source circuit
AVCLAN circuit between remote
A device that is listed in the AVCLAN network
Haptic Device operation board and radio
B1563 connected device record of the master unit is
Disconnected receiver assembly
missing
Remote operation board
Radio receiver assembly
Harness or connector
HINT:
The radio receiver assembly is the master unit.
WIRING DIAGRAM
https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/… 1/5
3/6/2017 AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B1563; Haptic Device Disconnected; 2015 2016 MY IS200T IS250 IS300 IS350 [06/2014 ]
CAUTION / NOTICE / HINT
NOTICE:
Inspect the fuses for circuits related to this system before performing the following procedure.
After replacing the radio receiver assembly of vehicles subscribed to paytype satellite radio broadcasts, XM radio
ID registration is necessary (w/ SDARS System).
PROCEDURE
1. CHECK OPTIONAL COMPONENTS (INCLUDING ASSOCIATED WIRING)
(a) Check for optional components.
(1) Check that optional components (including associated wiring) which generate radio waves are not
installed.
RESULT PROCEED TO
Optional components (including associated wiring) are installed. A
Optional components (including associated wiring) are not installed. B
HINT:
https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/… 2/5
3/6/2017 AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B1563; Haptic Device Disconnected; 2015 2016 MY IS200T IS250 IS300 IS350 [06/2014 ]
Electrical noise from radio waves generated by optional components or the wiring for those components may
affect AVCLAN communication.
This DTC may be stored when an AVCLAN communication error occurs due to electrical noise.
B GO TO STEP 3
2. REMOVE OPTIONAL COMPONENTS (INCLUDING ASSOCIATED WIRING)
(a) Remove optional components (including associated wiring).
NOTICE:
Do not remove optional components or associated wiring without the permission of the customer.
NEXT
3. CHECK DTC
(a) Clear the DTCs.
Click here
Body Electrical > Navigation System > Clear DTCs
(b) Recheck for DTCs and check that no DTCs are output.
Body Electrical > Navigation System > Trouble Codes
OK:
No DTCs are output.
OK END
NG
4. CHECK HARNESS AND CONNECTOR (REMOTE OPERATION BOARD POWER SOURCE)
(a) Disconnect the K78 remote operation board connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/… 3/5
3/6/2017 AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B1563; Haptic Device Disconnected; 2015 2016 MY IS200T IS250 IS300 IS350 [06/2014 ]
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
NG REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY REMOTE OPERATION
5.
BOARD)
(a) Disconnect the K78 remote operation board connector.
(b) Disconnect the K135 radio receiver assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
6. REPLACE REMOTE OPERATION BOARD
(a) Replace the remote operation board.
Click here
https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/… 4/5
3/6/2017 AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B1563; Haptic Device Disconnected; 2015 2016 MY IS200T IS250 IS300 IS350 [06/2014 ]
(b) Clear the DTCs.
Click here
Body Electrical > Navigation System > Clear DTCs
(c) Recheck for DTCs and check that no DTCs are output.
Body Electrical > Navigation System > Trouble Codes
OK:
No DTCs are output.
OK END
NG REPLACE RADIO RECEIVER ASSEMBLY
https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/… 5/5