Professional Documents
Culture Documents
Laboratorio 1 Circuitos
Laboratorio 1 Circuitos
LABORATORIO DE CIRCUITOS
ELÉCTRICOS II Práctica I - SIMULACIÓN
DE CIRCUITOS
First A. Author, Fellow, IEEE, Second B. Author, and Third C. Author, Jr., Member, IEEE
II.GUIDELINES FOR MANUSCRIPT PREPARATION
Abstract—These instructions give you guidelines for preparing When you open TRANS-JOUR.DOC, select “Page Layout”
papers for IEEE Transactions and Journals. Use this document
from the “View” menu in the menu bar (View | Page Layout),
as a template if you are using Microsoft Word 6.0 or later.
Otherwise, use this document as an instruction set. The electronic (these instructions assume MS 6.0. Some versions may have
file of your paper will be formatted further at IEEE. Paper titles alternate ways to access the same functionalities noted here).
should be written in uppercase and lowercase letters, not all Then, type over sections of TRANS-JOUR.DOC or cut and
uppercase. Avoid writing long formulas with subscripts in the paste from another document and use markup styles. The pull-
title; short formulas that identify the elements are fine (e.g., "Nd– down style menu is at the left of the Formatting Toolbar at the
Fe–B"). Do not write “(Invited)” in the title. Full names of
top of your Word window (for example, the style at this point
authors are preferred in the author field, but are not required.
Put a space between authors’ initials. Define all symbols used in in the document is “Text”). Highlight a section that you want
the abstract. Do not cite references in the abstract. Do not delete to designate with a certain style, then select the appropriate
the blank line immediately above the abstract; it sets the footnote name on the style menu. The style will adjust your fonts and
at the bottom of this column. line spacing. Do not change the font sizes or line spacing to
squeeze more text into a limited number of pages. Use italics
Index Terms—Enter key words or phrases in alphabetical for emphasis; do not underline.
order, separated by commas. For a list of suggested keywords,
send a blank e-mail to keywords@ieee.org or visit
To insert images in Word, position the cursor at the
http://www.ieee.org/organizations/pubs/ani_prod/keywrd98.txt insertion point and either use Insert | Picture | From File or
copy the image to the Windows clipboard and then Edit | Paste
Special | Picture (with “float over text” unchecked).
I. INTRODUCCIÒN IEEE will do the final formatting of your paper. If your
T
paper is intended for a conference, please observe the
HIS document is a template for Microsoft Word versions
conference page limits.
6.0 or later. If you are reading a paper or PDF version of
this document, please download the electronic file, A.Abbreviations and Acronyms
TRANS-JOUR.DOC, from the IEEE Web site at Define abbreviations and acronyms the first time they are
http://www.ieee.org/web/publications/authors/transjnl/index.html so used in the text, even after they have already been defined in
you can use it to prepare your manuscript. If you would prefer the abstract. Abbreviations such as IEEE, SI, ac, and dc do not
to use LATEX, download IEEE’s LATEX style and sample have to be defined. Abbreviations that incorporate periods
files from the same Web page. Use these LATEX files for should not have spaces: write “C.N.R.S.,” not “C. N. R. S.”
formatting, but please follow the instructions in TRANS- Do not use abbreviations in the title unless they are
JOUR.DOC or TRANS-JOUR.PDF. unavoidable (for example, “IEEE” in the title of this article).
If your paper is intended for a conference, please contact
your conference editor concerning acceptable word processor
formats for your particular conference. B.Other Recommendations
Use one space after periods and colons. Hyphenate complex
modifiers: “zero-field-cooled magnetization.” Avoid dangling
This paragraph of the first footnote will contain the date on which you participles, such as, “Using (1), the potential was calculated.”
submitted your paper for review. It will also contain support information, [It is not clear who or what used (1).] Write instead, “The
including sponsor and financial support acknowledgment. For example, “This potential was calculated by using (1),” or “Using (1), we
work was supported in part by the U.S. Department of Commerce under Grant
BS123456”. calculated the potential.”
The next few paragraphs should contain the authors’ current affiliations, Use a zero before decimal points: “0.25,” not “.25.” Use
including current address and e-mail. For example, F. A. Author is with the “cm3,” not “cc.” Indicate sample dimensions as “0.1 cm 0.2
National Institute of Standards and Technology, Boulder, CO 80305 USA (e-
mail: author@ boulder.nist.gov). cm,” not “0.1 0.2 cm2.” The abbreviation for “seconds” is
S. B. Author, Jr., was with Rice University, Houston, TX 77005 USA. He “s,” not “sec.” Use “Wb/m2” or “webers per square meter,”
is now with the Department of Physics, Colorado State University, Fort not “webers/m2.” When expressing a range of values, write “7
Collins, CO 80523 USA (e-mail: author@lamar.colostate.edu).
T. C. Author is with the Electrical Engineering Department, University of to 9” or “7-9,” not “7~9.”
Colorado, Boulder, CO 80309 USA, on leave from the National Research A parenthetical statement at the end of a sentence is
Institute for Metals, Tsukuba, Japan (e-mail: author@nrim.go.jp).
>REMPLACE ESTA LÍNIEA CON EL NÚMERO DE IDENTIFICACIÓN DE SU ARTÍCULO (DOBLE CLIC ACÁ) < 2
TABLE I
UNITS FOR MAGNETIC PROPERTIES
Conversion from Gaussian and
Symbol Quantity
CGS EMU to SI a
magnetic flux 1 Mx 108 Wb = 108 V·s
B magnetic flux density, 1 G 104 T = 104 Wb/m2
magnetic induction
H magnetic field strength 1 Oe 103/(4) A/m
m magnetic moment 1 erg/G = 1 emu
103 A·m2 = 103 J/T
M magnetization 1 erg/(G·cm3) = 1 emu/cm3
103 A/m
4M magnetization 1 G 103/(4) A/m
specific magnetization 1 erg/(G·g) = 1 emu/g 1 A·m2/kg
j magnetic dipole 1 erg/G = 1 emu
moment 4 1010 Wb·m
J magnetic polarization 1 erg/(G·cm3) = 1 emu/cm3
4 104 T
, susceptibility 1 4
mass susceptibility 1 cm3/g 4 103 m3/kg
Fig. 1. Magnetization as a function of applied field. Note that “Fig.” is permeability 1 4 107 H/m
abbreviated. There is a period after the figure number, followed by two = 4 107 Wb/(A·m)
spaces. It is good practice to explain the significance of the figure in the r relative permeability r
caption. w, W energy density 1 erg/cm3 101 J/m3
N, D demagnetizing factor 1 1/(4)
Vertical lines are optional in tables. Statements that serve as captions for
the entire table do not need footnote letters.
VI. GUIDELINES FOR GRAPHICS PREPARATION a
Gaussian units are the same as cg emu for magnetostatics; Mx =
AND SUBMISSION maxwell, G = gauss, Oe = oersted; Wb = weber, V = volt, s = second, T =
tesla, m = meter, A = ampere, J = joule, kg = kilogram, H = henry.
A.Types of Graphics
The following list outlines the different types of graphics
published in IEEE journals. They are categorized based on in one of the following programs you will be able to submit
their construction, and use of color / shades of gray: the graphics without converting to a PS, EPS, TIFF, PDF, or
PNG file: Microsoft Word, Microsoft PowerPoint, or
1) Color/Grayscale figures Microsoft Excel. Though it is not required, it is recommended
Figures that are meant to appear in color, or shades of that these files be saved in PDF format rather than DOC, XLS,
black/gray. Such figures may include photographs, or PPT. Doing so will protect your figures from common font
illustrations, multicolor graphs, and flowcharts. and arrow stroke issues that occur when working on the files
2) Lineart figures across multiple platforms. When submitting your final paper,
Figures that are composed of only black lines and shapes. your graphics should all be submitted individually in one of
These figures should have no shades or half-tones of gray. these formats along with the manuscript.
Only black and white.
D.Sizing of Graphics
3) Author photos
Head and shoulders shots of authors which appear at the Most charts, graphs, and tables are one column wide (3.5
end of our papers. inches / 88 millimeters / 21 picas) or page wide (7.16 inches /
4) Tables 181 millimeters / 43 picas). The maximum depth a graphic can
Data charts which are typically black and white, but be is 8.5 inches (216 millimeters / 54 picas). When choosing
sometimes include color. the depth of a graphic, please allow space for a caption.
Figures can be sized between column and page widths if the
B. Multipart figures author chooses, however it is recommended that figures are
Figures compiled of more than one sub-figure presented not sized less than column width unless when necessary.
side-by-side, or stacked. If a multipart figure is made up of There is currently one publication with column
multiple figure types (one part is lineart, and another is measurements that don’t coincide with those listed above.
grayscale or color) the figure should meet the stricter PROCEEDINGS OF THE IEEE has a column measurement of
guidelines. 3.25 inches (82.5 millimeters / 19.5 picas).
The final printed size of author photographs is exactly
C.File Formats For Graphics 1 inch wide by 1.25 inches tall (25.4 millimeters x 31.75
Format and save your graphics using a suitable graphics millimeters / 6 picas x 7.5 picas). Author photos printed in
processing program that will allow you to create the images as editorials measure 1.59 inches wide by 2 inches tall (40
PostScript (PS), Encapsulated PostScript (.EPS), Tagged millimeters x 50 millimeters / 9.5 picas x 12 picas).
Image File Format (.TIFF), Portable Document Format
(.PDF), or Portable Network Graphics (.PNG) sizes them, and
adjusts the resolution settings. If you created your source files
>REMPLACE ESTA LÍNIEA CON EL NÚMERO DE IDENTIFICACIÓN DE SU ARTÍCULO (DOBLE CLIC ACÁ) < 4
E.Resolution
The proper resolution of your figures will depend on the 2) Subfigure Labels in Multipart Figures and Tables
type of figure it is as defined in the “Types of Figures” Multipart figures should be combined and labeled before
section. Author photographs, color, and grayscale figures final submission. Labels should appear centered below each
should be at least 300dpi. Lineart, including tables should be a subfigure in 8 point Times New Roman font in the format of
minimum of 600dpi. (a) (b) (c).
H. Accepted Fonts Within Figures K. Referencing a Figure or Table Within Your Paper
When preparing your graphics IEEE suggests that you use When referencing your figures and tables within your paper,
of one of the following Open Type fonts: Times New Roman, use the abbreviation “Fig.” even at the beginning of a
Helvetica, Arial, Cambria, and Symbol. If you are supplying sentence. Do not abbreviate “Table.” Tables should be
EPS, PS, or PDF files all fonts must be embedded. Some fonts numbered with Roman Numerals.
may only be native to your operating system; without the fonts
L. Checking Your Figures: The IEEE Graphics Checker
embedded, parts of the graphic may be distorted or missing.
A safe option when finalizing your figures is to strip out the The IEEE Graphics Checker Tool enables authors to pre-
fonts before you save the files, creating “outline” type. This screen their graphics for compliance with IEEE Transactions
converts fonts to artwork what will appear uniformly on any and Journals standards before submission. The online tool,
screen. located at http://graphicsqc.ieee.org/, allows authors to upload
their graphics in order to check that each file is the correct file
format, resolution, size and colorspace; that no fonts are
I. Using Labels Within Figures missing or corrupt; that figures are not compiled in layers or
1) Figure Axis labels have transparency, and that they are named according to the
Figure axis labels are often a source of confusion. Use words IEEE Transactions and Journals naming convention. At the
rather than symbols. As an example, write the quantity end of this automated process, authors are provided with a
“Magnetization,” or “Magnetization M,” not just “M.” Put detailed report on each graphic within the web applet, as well
units in parentheses. Do not label axes only with units. As in as by email.
Fig. 1, for example, write “Magnetization (A/m)” or For more information on using the Graphics Checker Tool
“Magnetization (A ¿ m1),” not just “A/m.” Do not label or any other graphics related topic, contact the IEEE Graphics
axes with a ratio of quantities and units. For example, write Help Desk by e-mail at graphics@ieee.org.
“Temperature (K),” not “Temperature/K.”
Multipliers can be especially confusing. Write M. Submitting Your Graphics
“Magnetization (kA/m)” or “Magnetization (103 A/m).” Do Because IEEE will do the final formatting of your paper,
not write “Magnetization (A/m) 1000” because the reader you do not need to position figures and tables at the top and
would not know whether the top axis label in Fig. 1 meant bottom of each column. In fact, all figures, figure captions,
16000 A/m or 0.016 A/m. Figure labels should be legible, and tables can be placed at the end of your paper. In addition
approximately 8 to 10 point type. to, or even in lieu of submitting figures within your final
>REMPLACE ESTA LÍNIEA CON EL NÚMERO DE IDENTIFICACIÓN DE SU ARTÍCULO (DOBLE CLIC ACÁ) < 5
manuscript, figures should be submitted individually, separate abbreviated to the initial only and precedes the last name. Use
from the manuscript in one of the file formats listed above in them all; use et al. only if names are not given. Use commas
section VI-J. Place figure captions below the figures; place around Jr., Sr., and III in names. Abbreviate conference titles.
table titles above the tables. Please do not include captions as When citing IEEE transactions, provide the issue number,
part of the figures, or put them in “text boxes” linked to the page range, volume number, year, and/or month if available.
figures. Also, do not place borders around the outside of your When referencing a patent, provide the day and the month of
figures. issue, or application. References may not include all
information; please obtain and include relevant information.
N.Color Processing / Printing in IEEE Journals Do not combine references. There must be only one reference
All IEEE Transactions, Journals, and Letters allow an author with each number. If there is a URL included with the print
to publish color figures on IEEE Xplore® at no charge, and reference, it can be included at the end of the reference.
automatically convert them to grayscale for print versions. In Other than books, capitalize only the first word in a paper
most journals, figures and tables may alternatively be printed title, except for proper nouns and element symbols. For papers
in color if an author chooses to do so. Please note that this published in translation journals, please give the English
service comes at an extra expense to the author. If you intend citation first, followed by the original foreign-language
to have print color graphics, include a note with your final citation See the end of this document for formats and
paper indicating which figures or tables you would like to be examples of common references. For a complete discussion of
handled that way, and stating that you are willing to pay the references and their formats, see “The IEEE Style Manual,”
additional fee. available as a PDF link off the Author Digital Toolbox main
page.
APPENDIX
VIII.SUBMITTING YOUR PAPER FOR REVIEW
Appendixes, if needed, appear before the acknowledgment.
A.Review Stage Using Word 6.0 or Higher
ACKNOWLEDGMENT If you want to submit your file with one column
The preferred spelling of the word “acknowledgment” in electronically, please do the following:
American English is without an “e” after the “g.” Use the --First, click on the View menu and choose Print Layout.
singular heading even if you have many acknowledgments. --Second, place your cursor in the first paragraph. Go to
Avoid expressions such as “One of us (S.B.A.) would like to the Format menu, choose Columns, choose one column
thank ... .” Instead, write “F. A. Author thanks ... .” In most Layout, and choose “apply to whole document” from the
cases, sponsor and financial support acknowledgments are dropdown menu.
placed in the unnumbered footnote on the first page, not here. --Third, click and drag the right margin bar to just over 4
inches in width.
REFERENCES AND FOOTNOTES The graphics will stay in the “second” column, but you can
drag them to the first column. Make the graphic wider to push
A. References out any text that may try to fill in next to the graphic.
References need not be cited in text. When they are, number
B.Final Stage Using Word 6.0
citations on the line, in square brackets inside the punctuation.
Multiple references are each numbered with separate brackets. When you submit your final version (after your paper has
When citing a section in a book, please give the relevant page been accepted), print it in two-column format, including
numbers. In text, refer simply to the reference number. Do not figures and tables. You must also send your final manuscript
use “Ref.” or “reference” except at the beginning of a on a disk, via e-mail, or through a Web manuscript submission
sentence: “Reference [3] shows ... .” Please do not use system as directed by the society contact. You may use Zip for
automatic endnotes in Word, rather, type the reference list at large files, or compress files using Compress, Pkzip, Stuffit, or
the end of the paper using the “References” style. Gzip.
Reference numbers are set flush left and form a column of Also, send a sheet of paper or PDF with complete contact
their own, hanging out beyond the body of the reference. The information for all authors. Include full mailing addresses,
reference numbers are on the line, enclosed in square brackets. 1
It is recommended that footnotes be avoided (except for the unnumbered
In all references, the given name of the author or editor is footnote with the receipt date on the first page). Instead, try to integrate the
footnote information into the text.
>REMPLACE ESTA LÍNIEA CON EL NÚMERO DE IDENTIFICACIÓN DE SU ARTÍCULO (DOBLE CLIC ACÁ) < 6
4) Because replication is required for scientific progress, [16] J. Jones. (1991, May 10). Networks. (2nd ed.) [Online]. Available:
http://www.atm.com
papers submitted for publication must provide sufficient
information to allow readers to perform similar Basic format for journals (when available online):
experiments or calculations and use the reported results. [17] Author. (year, month). Title. Journal. [Type of medium]. volume
(issue), pages. Available: site/path/file
Although not everything need be disclosed, a paper must
Example:
contain new, useable, and fully described information. For [18] R. J. Vidmar. (1992, Aug.). On the use of atmospheric plasmas as
example, a specimen’s chemical composition need not be electromagnetic reflectors. IEEE Trans. Plasma Sci. [Online].
reported if the main purpose of a paper is to introduce a 21(3), pp. 876–880. Available:
http://www.halcyon.com/pub/journals/21ps03-vidmar
new measurement technique. Authors should expect to be
challenged by reviewers if the results are not supported by
adequate data and critical details. Basic format for papers presented at conferences (when
5) Papers that describe ongoing work or announce the latest available online):
[19] Author. (year, month). Title. Presented at Conference title. [Type
technical achievement, which are suitable for presentation of Medium]. Available: site/path/file
at a professional conference, may not be appropriate for Example:
publication. [20] PROCESS Corp., MA. Intranets: Internet technologies deployed
behind the firewall for corporate productivity. Presented at
INET96 Annual Meeting. [Online]. Available:
http://home.process.com/Intranets/wp2.htp
REFERENCES
Basic format for books: Basic format for reports and handbooks (when available
[1] J. K. Author, “Title of chapter in the book,” in Title of His Published online):
Book, xth ed. City of Publisher, Country if not [21] Author. (year, month). Title. Comp an y . C ity , State or
[2] USA: Abbrev. of Publisher, year, ch. x, sec. x, pp. xxx–xxx. Country. [Type of Medium]. Available: site/path/file
Examples: Example:
[3] G. O. Young, “Synthetic structure of industrial plastics,” in Plastics, [22] S. L. Tall een. (1996 , Apr . ). The In t r an et Archi
2nd ed., vol. 3, J. Peters, Ed. New York: McGraw-Hill, 1964, -te c tu r e : M a n a g i n g i n f o r m a t i o n i n t h e n e w
pp. 15–64. paradigm. Amdahl Corp., CA. [Online]. Available:
[4] W.-K. Chen, Linear Networks and Systems. Belmont, CA: http://www.amdahl.com/doc/products/bsg/intra/infra/html
Wadsworth, 1993, pp. 123–135.
Basic format for computer programs and electronic documents
Basic format for periodicals: (when available online): ISO recommends that capitalization
[5] J. K. Author, “Name of paper,” Abbrev. Title of Periodical, vol. x, no. follow the accepted practice for the language or script in
x, pp. xxx-xxx, Abbrev. Month, year. which the information is given.
Examples: Example:
[6] J. U. Duncombe, “Infrared navigation—Part I: An assessment [23] A. Harriman. (1993, June). Compendium of genealogical
of feasibility,” IEEE Trans. Electron Devices, vol. ED-11, no. 1, pp. 34– software. Humanist. [Online]. Available e-mail:
39, Jan. 1959. HUMANIST@NYVM.ORG Message: get GENEALOGY REPORT
[7] E. P. Wigner, “Theory of traveling-wave optical laser,” Phys. Rev.,
vol. 134, pp. A635–A646, Dec. 1965. Basic format for patents (when available online):
[8] E. H. Miller, “A note on reflector arrays,” IEEE Trans. Antennas
[24] Name of the invention, by inventor’s name. (year, month day). Patent
Propagat., to be published.
Number [Type of medium]. Available: site/path/file
Example:
Basic format for reports: [25] Musical toothbrush with adjustable neck and mirror, by L.M.R. Brooks.
[9] J. K. Author, “Title of report,” Abbrev. Name of Co., City of Co., (1992, May 19). Patent D 326 189
Abbrev. State, Rep. xxx, year. [Online]. Available: NEXIS Library: LEXPAT File: DESIGN
Examples:
[10] E. E. Reber, R. L. Michell, and C. J. Carter, “Oxygen absorption in the Basic format for conference proceedings (published):
earth’s atmosphere,” Aerospace Corp., Los Angeles, CA, Tech. Rep.
[26] J. K. Author, “Title of paper,” in Abbreviated Name of Conf., City of
TR-0200 (4230-46)-3, Nov. 1988.
Conf., Abbrev. State (if given), year, pp. xxxxxx.
[11] J. H. Davis and J. R. Cogdell, “Calibration program for the 16-foot
antenna,” Elect. Eng. Res. Lab., Univ. Texas, Austin, Tech. Memo. Example:
NGL-006-69-3, Nov. 15, 1987. [27] D. B. Payne and J. R. Stern, “Wavelength-switched pas- sively coupled
single-mode optical network,” in Proc. IOOC-ECOC, 1985,
pp. 585–590.
Basic format for handbooks: Example for papers presented at conferences (unpublished):
[12] Name of Manual/Handbook, x ed., Abbrev. Name of Co., City of Co.,
[28] D. Ebehard and E. Voges, “Digital single sideband detection for
Abbrev. State, year, pp. xxx-xxx.
interferometric sensors,” presented at the 2nd Int. Conf. Optical Fiber
Examples: Sensors, Stuttgart, Germany, Jan. 2-5, 1984.
[13] Transmission Systems for Communications, 3rd ed., Western Electric
Co., Winston-Salem, NC, 1985, pp. 44–60. Basic format for patents:
[14] Motorola Semiconductor Data Manual, Motorola Semiconductor [29] J. K. Author, “Title of patent,” U.S. Patent x xxx xxx, Abbrev. Month,
Products Inc., Phoenix, AZ, 1989. day, year.
Example:
Basic format for books (when available online): [30] G. Brandli and M. Dick, “Alternating current fed power supply,”
[15] Author. (year, month day). Title. (edition) [Type of medium]. U.S. Patent 4 084 217, Nov. 4, 1978.
volume (issue). Available: site/path/file
Example: Basic format for theses (M.S.) and dissertations (Ph.D.):
>REMPLACE ESTA LÍNIEA CON EL NÚMERO DE IDENTIFICACIÓN DE SU ARTÍCULO (DOBLE CLIC ACÁ) < 8