Professional Documents
Culture Documents
4E1 to Ethernet protocol converter IDM-4E1/ETH is protocol converter use inverse multiplexing
technology. IDM-4E1/4ETH net can make many channel E1 transfer 10M/100M Ethernet. it can make
4E1 channel and Ethernet interface interconversion. The max Ethernet bandwidth is 7.92M. IDM-
4E1/4ETH protocol converter is used in LAN-To-LAN, Bureau of the interconnect , VOD, remote control,
Switches of E1 interface card etc. it expand the transmission distance and applied range with the many
E1 resource in telecommunication network.
Feature
Support E1 channel delay detection function, The max relative delay in E1 channel is 220ms
Can transfer jumbo frame, support Ethernet switchboard with Vlan faction.
Can delete the faulted E1 channel automatic. it can automatic recover when the faulted is deleted
Can transparent transmission Jumbo Frame that meet IEEE 802.1Q, support Ethernet converter with
VLAN function
Specification:
E1 interface
Ethernet interface
Power supply
Environmental conditions
Application
Product model:
type Describe
IDM E1-ETH Ethernet to 1group E1 GF protocol conversion, offer 1group balance and unbalance E1
interface.
IDM 4E1-ETH Ethernet to 4group E1 GF protocol conversion, offer 4group balance and unbalance E1
interface.
IDM 8E1-ETH Ethernet to 8group E1 GF protocol conversion, offer 8group balance and unbalance E1
interface.