Professional Documents
Culture Documents
ENR Receptacles
• Superior Safety
• Exclusive Reliability
• Unmatched Convenience
• Added Versatility
• NEMA 3 Raintight
• Lockout/Tagout
Ark-Gard Premier ENR Receptacle
• Premier Solution. The premier line of ENR Receptacles (M4) come equipped with exclusive features that increase the life of the product,
reduce maintenance costs, and eliminate the need to purchase costly replacement parts. There is no other product offering on the market today
that comes equipped with time-saving saddle clamp terminals or the added safety of a lockout/tagout hole. The premier ENR Receptacle series
is the ideal solution for applications where increased safety and reliability are critical.
• Value Solution. The value line of ENR Receptacles is the ideal solution for rugged and industrial NEMA configured application up to 20
amperes. Like the premier line, this product comes equipped with built-in safety features that reject standard NEMA configuration plugs that
could cause and arc in hazardous areas.
Protected Hinge:
• Cap design provides 360° of protection
around cover hinge to reduce damage from
Spring-Loaded Sliding Key Offers Increased dirt and corrosion
Safety:
• Rejects standard NEMA/EEMAC configuration plugs
that could cause an arc in a hazardous area.
• Also prevents the receptacle faceplate from being
rotated until the ENP plug is fully inserted.
Integral Bushings:
Saddle Clamp • Taper tapped hubs protect wire installation
during wire-pulling
Terminals:
• Reduce installation
and maintenance
costs – easy to wire,
time-saving terminals
FEATURES AND BENEFITS - Traditional Value Solution • Top hinged cover design with 45° downward
angle provides protection in damp, wet and
dirty locations
OPTIONS
• S752 - Corro-Free™ epoxy powder finish for added corrosion resistance
ORDERING INFORMATION
3
Premier ENR-GFCI Kits
• Premier ENR-GFCI Kits. The Premier ENR – GFCI is the ideal solution to comply with OSHA’s requirements for GFCI protection when using
portable equipment in hazardous locations. This offering allows for a single part number to be specified, ordered and delivered on-site,
significantly reducing the cost of order processing, material handling and mis-placement of materials.
FEATURES
ENR - GFCI Kits:
• Include all of the value-added features of the Premier ENR Receptacle series: hinged screw-cap
cover design, OSHA lockout/tagout compliance, and a spring-loaded sliding key for added safety
• The GFCI protects personnel against possible injury due to unwanted ground faults and meets
requirements for personnel protection as defined in the National Electrical Code®
• Decentralized GFCI protection on branch circuits permits immediate identification of circuit
where a ground fault is occurring, does not interrupt power on total branch circuit if tripped or
when periodically tested, and significantly reduces incidence of nuisance tripping
• Premier ENR – GFCI Kits are installed on two-gang EDS back boxes and are self-certified to
meet UL requirements for Class I, Div 1, Group B environments and are NEMA 3 rated
ORDERING INFORMATION
Receptacle Rating Description Hub Size Catalog # NEMA Config. Plug Cat. # NEMA Config.
1/2" ENR12151 M4 GFI
Dead
End 3/4" ENR22151 M4 GFI
G
15 Amp 1" ENR32151 M4 GFI G
ENP5151
125 Volt W
W
1/2" ENRC12151 M4 GFI
Through
Feed 3/4" ENRC22151 M4 GFI
1" ENRC32151 M4 GFI
DIMENSIONS 66.7
2 5/8"
8.7
Ø 11/32"
149.2
5 7/8"
171.7
Dimension “A” 6 3/4"
129.4
5 3/32"
174.4 A
6 7/8"
A =3 1/2" FOR SINGLE GANG
B = 7 9/16" FOR TWO GANG
Cooper Crouse-Hinds
P.O. 4Box
† For 4999
pole or 400A disconnect switches or NEMA 4X stainless enclosures information - consult factory
Syracuse, NY 13221
Toll Free: (866) 764-5454
Fax: (315) 477-5179 FAX Orders Only: (866) 653-0640
crouse.customerctr@cooperindustries.com