Professional Documents
Culture Documents
Series Code
High Voltage Film Capacitors 134
High Voltage Ceramic Disc Capacitor Replacement
Main Application Capacitance Tolerance
Oscillator, timing and LC/RC filter circuits, high frequency ±1%, ±2%, ±2.5%, ±5%, ±10%
coupling of fast digital and analogue ICs.
Voltage Proof
Construction Between terminals: 2 times of rated voltage.
Film/foil inductive type construction with aluminum foil as
electrode and plastic film as dielectric coated with flame Tan δ
retardant epoxy resin. 0.08% (maximum) at 1 kHz.
Climatic Category Life Test Conditions
40/100/56 (Loading at elevated temperature)
Loaded at 1.5 times of rated voltage at 85° C or 1.5
Applicable Specification times of category voltage at 100° C for 1000 hours.
IEC 384-13 Category voltage is 80% of rated voltage.
Rated and Maximum Temperature Rating After the test
85°C and 100°C ΔC/C: £ 5% of initial value.
Capacitance Value Increase of Tan δ: £ 0.01 or 1.2 times the value
0.0001µF - 0.02µF measured before the test, whichever is higher.
Insulation resistance: ³ 50% of the value mentioned in
Rated Voltage IR chart.
630VDC - 2000VDC
Insulation Resistance
Minimum Insulation Resistance RIS VR CR≤0.1µF CR>0.1µF
(or) time constant T = CR × RIS
at 25° C, relative humidity ≤70% ≥630 V DC 100 GΩ 10000 s
Derating graph for High Voltage Film Capacitor • Series code 134
Max. Voltage (Vrms) vs. Frequency Max. Current (Irms) vs. Frequency
(Sinusoidal Waveform at T ≤ 55° C) (Sinusoidal Waveform at T ≤ 55° C)
High Voltage Film Capacitors
High Voltage Ceramic Disc Capacitor Replacement • Series Code 134
Max. Voltage (Vrms) vs. Frequency Max. Current (Irms) vs. Frequency
(Sinusoidal Waveform at T ≤ 55° C) (Sinusoidal Waveform at T ≤ 55° C)