The 3 sentence summary is as follows:
The document provides instructions for setting up an S500 demo case for RS485 communications to an FX3U PLC, including resetting the drive, setting specific parameter values like the station number, communication speed, stop bit length and parity check, and power cycling the drive. The parameters are set to enable RS485 communication at 192kbps with a station number of 1 and other settings for proper serial communication between the devices.
The 3 sentence summary is as follows:
The document provides instructions for setting up an S500 demo case for RS485 communications to an FX3U PLC, including resetting the drive, setting specific parameter values like the station number, communication speed, stop bit length and parity check, and power cycling the drive. The parameters are set to enable RS485 communication at 192kbps with a station number of 1 and other settings for proper serial communication between the devices.
The 3 sentence summary is as follows:
The document provides instructions for setting up an S500 demo case for RS485 communications to an FX3U PLC, including resetting the drive, setting specific parameter values like the station number, communication speed, stop bit length and parity check, and power cycling the drive. The parameters are set to enable RS485 communication at 192kbps with a station number of 1 and other settings for proper serial communication between the devices.
Issued by: Mitsubishi Electric Europe B.V. - UK Branch
Document issue: V1.00 June 2006 Produced by : - CTC Travellers Lane, Hatfield, Herts, AL10 8XB, UK Author: Barry Weller
Databank - Technical Bulletin
S500 Demo Case Set-up
Factory reset the drive
Set the following parameters.
Parameter Function Set Value
30 Extended function display screen 1 79 Operation mode selection 0 N1 Station number 1 N2 Communication speed 192 N3 Stop bit length 10 N4 Parity check presence/absence 2 N5 Number of communication retries ---- N6 Communication check time interval ---- N7 Waiting time setting ---- N10 Link start mode selection 1 N11 CR, LF presence/absence selection 1