Professional Documents
Culture Documents
1
Hotfix Readme
Thank you for downloading Robot Structural Analysis Professional 2020.0.1
hotfix.
This readme contains the latest information regarding the installation and use of this
hotfix. It is strongly recommended that you read this entire document before you apply
the hotfix to your licensed copy of the product.
Contents
• Installation Instructions
• General Issues
• Steel Design
Robot Structural Analysis Professional 2020.0.1 hotfix is recommended for all users. It
enhances reliability and corrects issues that you may encounter while using the
product.
This hotfix addresses a major issue in which Robot Structural Analysis 2020 will not run
or will crash on program start. This issue applies to some Single-User subscription
license users.
This hotfix may be applied to any licensed copy of Autodesk Robot Structural Analysis
Professional 2020 software installed as a stand-alone product, or as part of a suite on a
64-bit OS.
or
• Download and install this hotfix directly from your product through the Autodesk
Desktop App.
The Autodesk Desktop App is installed by default with Autodesk Robot Structural
Analysis Professional 2020.
Update from the Autodesk Desktop App:
1. When the hotfix becomes available, the Autodesk Desktop App displays a
notification on the system tray.
Note: You can also check for updates manually:
• On the system tray, right-click the Autodesk Desktop App icon.
• On the shortcut menu, click Check for new updates.
2. Launch the Autodesk Desktop App and open the Updates tab, a notification
displays the relevant details about this hotfix.
3. Click Update to download and install the hotfix on your computer.
Return to Top
Installation Instructions
• Apply this Hotfix to a Standalone Installation
• Apply This Hotfix Through a Local Network
• Apply this Hotfix to a Network Administrative Image (Deployment)
• Uninstall this Hotfix
Return to Top
Return to Top
Follow these instructions to install this hotfix on multiple computers using your local
network.
1. Download this hotfix and save it to any shared folder on your local network.
2. Find the shared folder where you saved the hotfix, and double-click the MSP file.
Note: Installation through your local network using the CAD Manager Control Utility is
not supported for this hotfix.
Return to Top
The following distribution method applies only to administrative images created with the
Deployment wizard.
1. Navigate to the folder where the deployment is saved.
2. Open the Tools folder under the Deployment folder, and launch the “Create &
modify a deployment” setup.
3. Follow the Install Deployment wizard with default settings, and click Create. Then
click the Add Updates button.
4. In the Autodesk AppModeDeployment Updates dialog box, click UPDATES, and then
the Add button to the hotfix that you want to add. Make sure the Status has
changed to “Included” and the Add button becomes Remove. Then Close the dialog
box.
Note: When the hotfix is included in a deployment, the deployment will install the
hotfix.
Return to Top
Windows 7 / Windows 10
1. From the Start menu (Windows), click Control Panel.
2. Click Programs and Features.
3. In the Programs and Features window, in the left pane, click View Installed Updates.
4. Find the appropriate hotfix in the list of updates. Click Uninstall.
Return to Top
Primary Issues Resolved by Robot Structural Analysis Professional 2020.0.1
Hotfix
General Issues
• Fixed an issue in which the program could crash on start for some Single-User
subscription license.
Steel Design
• Corrected the unidirectional pipe verification method when, in some locations, bi-
directional bending was checked.
• Corrected the nominal strength for tension flange yielding procedure in American
standard ANSI/AISC 360-10.
Return to Top