Professional Documents
Culture Documents
FEATURES
Engine Design Testing
- Proven reliability and durability Every engine is full-load tested to ensure proper engine
- Robust diesel strength design prolongs life and lowers performance.
owning and operating costs Product Support Offered Through Global Cat Dealer
- Broad operating speed range. Network
- PTO drive options provide flexible access to auxiliary More than 2,200 dealer outlets
power for pumps and other needs Cat factory-trained dealer technicians service every
Optional Attachments aspect of your petroleum engine
SCAC HEX — allows for sea watercooling capabilities Cat parts and labor warranty
Advanced Digital Engine Management Preventive maintenance agreements available for repair-
ADEM A4 engine management system integrates speed before-failure options
control, air/fuel ratio control and ignition/detonation S•O•SSM program matches your oil and coolant samples
controls into a complete engine management system against Caterpillar set standards to determine:
with integrated digital ignition, engine protection and - Internal engine component condition
monitoring. - Presence of unwanted fluids
Transmissions - Presence of combustion by-products
Caterpillar has a full line of engine-transmission packages - Site-specific oil change interval
that can be fully integrated with your axle, hydraulics, and Over 80 Years of Engine Manufacturing Experience
operator interface. Cat® transmissions deliver continuous Ownership of these manufacturing processes enables
operation under full load, smooth shifting at any speed, Caterpillar to produce high quality, dependable products.
and maximum up time, with unmatched durability and - Cast engine blocks, heads, cylinder liners, and flywheel
easy maintenance. housings
Custom Packaging - Machine critical components
For any petroleum application, trust Caterpillar to meet - Assemble complete engine
your exact needs with a factory custom package. Cat Web Site
engines, generators, enclosures, controls, radiators, For all your petroleum power requirements, visit .
transmissions — anything your project requires — can be www.catoilandgas.cat.com.
custom designed and matched to create a one-of-a kind
solution. Custom packages are globally supported and
are covered by a one-year warranty after startup.
Full Range of Attachments
Large variety of factory-installed engine attachments
reduces packaging time
LEHW0050-01 Page 1 of 4
ACERT™ PETROLEUM ENGINE
597-914 bkW (800-1225 bhp)
standard equipment
Air Inlet System Flywheels and Flywheel Housing
Connections configured for SCAC and ATAAC (Air-to-Air- SAE No. 0 or SAE No. 1 flywheel iron housing.
Aftercooled) or remote heat exchanger SAE No. 0 or SAE No. 1 flywheel.
Control System Optional transmission adapter
ADEM A4 electronic control module Lube System
Electronic governing, PTO speed control. Crankcase breather.
Customer programmable ratings Oil filter — RH standard, optional LH or remote.
Cold mode start strategy. mount service.
Automatic altitude compensation Oil level gauge — RH standard, optional LH or.
Automatic fuel temperature compensation dual service.
Programmable low and high idle. Oil filler — RH standard, optional LH or dual service.
Electronic diagnostics and fault logging. Shallow oil pan, rear sump
Engine monitoring system Mounting System
SAE J1939 broadcast (diagnostic and engine status) Trunnion front support.
Cooling System Vertical and horizontal pads on rear flywheel housing
Gear-driven centrifugal jacket water pump — RH Protection System
Integrated thermostat and housing.
24 volt electronic.
Engine oil cooler
Engine overspeed with optional air shut-offs with .
Optional installed transmission oil cooler.
indicators.
Optional aftercooler and auxiliary water pump.
Low engine oil pressure.
Optional jacket water heat exchanger
Fuel filter restriction.
Exhaust System Fuel temperature.
Exhaust manifold — watercooled High engine coolant temperature.
Fuel System Low engine coolant temperature
MEUI. General
Fuel priming pump. Vibration damper.
Fuel transfer pump. Lifting eyes.
Primary and secondary fuel filter — RH configured for Optional customer wiring connector.
remote mounting (installed RH on shipping plate) . Service tool connector.
Paint — Cat yellow.
Optional two-part primer and mastic caulk
OPTIONAL ATTACHMENTS
Air Compressors Instrumentation
Air Inlet System Customer management device
Air cleaner Interconnect harness
Air inlet adapters Gauges and instrument panels
Turbocharger outlet adapters Lube System
Air lines Oil pans
Charging System Oil service side
Battery chargers Oil level gauge
Charging alternators Oil filters
Alternator mounting Lubricating oils
Circuit breakers and mountings Mounting System
Cooling System Structural steel base
Dry charge coolant conditioners Engine support — front
Thermostat housing Engine support — rear
Coolant level sensor Power Take-Offs
Radiator Auxiliary drive
Blower fans Damper pulley
Suction fans Hydraulics gear pumps
Fan adapters Protection System
Fan drives Mechanical shutoffs
Emissions Solenoid shutoffs
IMO certifications Starting System
Exhaust System Electric starting motors – 12V, 24V
Elbows Battery sets – 24V
Mufflers Battery cable
Fuel Systems Battery rack
Electric fuel priming pump Starting aids
Transmission Arrangement
Transmission water lines
Transmission cooler
LEHW0050-01 Page 2 of 4
C32 ACERT™ PETROLEUM ENGINE
597-914 bkW (800-1225 bhp)
PERFORMANCE curves
Turbocharged-Aftercooled
D Rating — 828 bkW (1110 bhp) @ 2100 rpm*
DM9685-00
5075 3743
Torque
3920 2891
Torque
N•m
lb-ft
2766 2040
1611 1188
828 1110
Engine Power
Engine Power
586 785
bkW
bhp
343 461
101 136
220 .361
lb/bhp-hr
g/bkW-hr
216 .356
BSFC
BSFC
213 .351
210 .346
*Other engine ratings are available. Please contact dealer for performance data.
LEHW0050-01 Page 3 of 4
C32 ACERT™ PETROLEUM ENGINE
597-914 bkW (800-1225 bhp)
PETROLEUM ENGINE
1933 mm 1488 mm
76.1 in 57 in
1389 mm
54.7 in
Engine Dimensions Note: Do not use for installation design. See
general dimension drawings for detail
Length 1933 mm 76.1 in
(Drawing #310-1652).
Width 1488 mm 57 in
Height 1389 mm 54.7 in
Engine Weight (dry) 2306 kg 5084 lb
Information contained in this publication may be considered confidential. Discretion is recommended when distributing.
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
CAT, CATERPILLAR, their respective logos, ACERT, ADEM, S•O•S, “Caterpillar Yellow” and the “Power Edge” trade dress,
as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Performance Number: DM9685-00 ©2010 Caterpillar
LEHW0050-01 (11-10) All rights reserved.