INSTRUMENTATION AND
CONTROL SERVICING NC I
5. TRIPOD / PIPE VISE
used to hold/tighten the pipe while
Threading.
6. SCREWDRIVER
is a device used to insert and tighten, or to
loosen and remove screws. Screwdrivers come
ina large variety of sizes to match those of screws,
from tiny jeweler’s screwdrivers up. It is important
to use a screwdriver that is the right size and type
for the screw used.
7. METER TAPE
used to measure the length of tube and pipe.
8, LEVEL
-used for leveling vertical and horizontal
installation of instrument, tubing and support.
9. TUBE BENDER
-used for bending of tubing.
10. PLIERS
-Are hand tools primarily for gripping
that use leverage.
Cutting Pliers ~ used to pinch off
(side cutting, or linesman’s pliers, diagonal
cutters, pinching pliers).
Gripping Pliers — used to improve grip
{fiat nose,round nose, long nose or needle nose
which have long, narrow jaws for gripping in
confined spaces, water pump pliers with
adjustable jaw sizes, which are designed to grip
various sizes of round, hexagon,flat etc.,
7
Competency Based Learning Material