Professional Documents
Culture Documents
Introduction
SKF's condition monitoring and custom product provider brings high quality flexible solutions to SKF customers.
Over the years, many custom items have become products that are stocked or built to existing designs with short lead times.
These items include:
• Accelerometer mounting accessories and tools • Vibration and temperature speed sensors
• Kits • Tachometers
• Probe (proximity) mounting hardware • Custom panels, Wonderware integration and Turbine
Supervisory Systems and more...
Note: For CMSS420VT Loop-powered Transmitter and CMSS265, 300 and 310 BNC junction boxes, refer to the CM2355 Standard Product Catalog.
For the CMCP500 series of special Transmitters/Monitors and low cost monitoring systems, refer to the Condition Monitoring and Custom Product
Catalog, publication number CM2380.
For the CMSS500 series of standard Transmitters and Monitors, refer to the MCT (Machine Condition Transmitters) brochure, publication number CM2284.
SKF Condition Monitoring Custom Products
Table of Contents – Product Catalog
www.skf.com/cm
4
Table of Contents
Eddy Probe Accessories
Mounting Hardware
CMCP1210 – RTD & Thermocouple Tip Sensitive, Spring LoadedSensors for Rolling Element Bearings.................... 38
SKF offers for sale the products described herein as a convenience to our customers. The products have been shown to meet
our customers’ needs and complement SKF products, systems and services. These quality products are manufactured, tested
and delivered by third parties and are not warranted by SKF. SKF will transfer to the Buyer any warranties made by the
applicable third party product vendor to the extent such warranties are transferable.
SKF Condition Monitoring Custom Products
Eddy Probe Accessories
www.skf.com/cm
6
CMCP140/150 – Enclosures
Features
• NEMA 4 and NEMA 4X
Description
The enclosure covers has a continuous hinge on the long
side of the unit, and are secured to the box with clamps. The
enclosures are available in NEMA 4 painted steel or NEMA Enclosure Dimensions
4X stainless steel to cover most applictioans. All enclosures
04 Height: 10" (25.4 cm) Width: 8" (20.3 cm) Depth: 6" (15.2 cm)
are provided with an oil resistant gasket and stainless steel
clamps for easy access. 06 Height: 12" (30.5 cm) Width: 10" (25.4 cm) Depth: 6" (15.2 cm)
08 Height: 14" (35.6 cm) Width: 12" (30.5 cm) Depth: 6" (15.2 cm)
All enclosures may be air purged with plant air to meet the 10 Height: 16" (40.6 cm) Width: 14" (35.6 cm) Depth: 6" (15.2 cm)
needs of hazardous areas. A simple purge fitting connection
is available as a standard option. Hazardous area air purge
systems can be supplied upon request.
CMCP140/150 Ordering Information
NEMA 4 Enclosures are ANSI 61 Powder paint (gray) coated
on the all surfaces, and are constructed from 14 gauge mild CMCP140 - NEMA 4 Enclosure
steel. These enclosures are designed for use in areas which CMCP150 - NEMA 4X -XX Description
Enclosure
may be regularly hosed down or are very wet, and they are
suitable for indoor or outdoor installations. 04 1-4 Drivers
06 5-6 Drivers
NEMA 4X Enclosures are constructed from 14 gauge 304 08 8 Drivers
stainless steel. They are designed for the same use as
10 10 Drivers
the NEMA 4 enclosures with the ability to resist corrosive
environments.
SKF Condition Monitoring Custom Products
Eddy Probe Accessories
www.skf.com/cm
7
• Precision Micrometer
• 4140 Target
Description
The CMCP610 Eddy Probe Calibrator provides a convenient
and precise method of verifying the voltage output vs.
physical gap of an Eddy Probe and Driver system.
Description
The CMCP801 Eddy Probe Holder is designed for external
mount of proximity probes as described and recommended
by API670. External (through the case) mounting allows for
easy removal, inspection and adjustment of the proximity CMCP801 Ordering Information
probe.
CMCP801 -XX -XXX Description
The CMCP801 comes with a standard length of 12", and has 01 3/8"-24 UNF Probe
an adjustment range of ± 1.0" (2.54 cm). The sleeve may be 02 1/4"-28 UNF Probe
cut to your required length. Prior to ordering, the insertion 012 12" Insertion Length
depth should be measured or calculated. If the required XXX Specify Longer
depth is greater than 12", please call to specify the length
needed.
Description
The CMCP805 Eddy Probe Bracket eliminate the chore of
making special brackets or fixtures for a internally mounted
eddy probe installation. Threaded and slotted, the CMCP805
insures a firm grip and stable installation once you have
properly positioned the probe.
CMCP805 Ordering Information
CMCP805 -XX Description
01 3/8"-24 UNF Probe
02 1/4"-28 UNF Probe
SKF Condition Monitoring Custom Products
Eddy Probe Accessories
www.skf.com/cm
9
• 316 SS
Why drill a hole when you don’t have to? Make use of existing
plugged holes on your machine. The CMCP203 Pipe Thread
Mounting Adaptor is made of 316 Stainless Steel and
surfaced for Accelerometer mounting.
Description
The CMCP203 Pipe Thread Mounting Adaptors provide
a mounting location for either magnetically mounted or
permanently mounted accelerometers.
Specifications
They are provided in 1/4", 3/8", 1/2" and 3/4" NPT sizes Material 316 SS
to accommodate the most common plugs found on most
Adaptor Surface Finish 32 µ in. RMS
machinery. The adaptors have a 1/4"-28 threaded hole to
Adaptor Thread 1/4", 1/2", 3/8" or 3/4" NPT
mate with the most common accelerometers and vibration
transmitters. Threaded Hole 1/4" - 28
• 416 SS (Magnetic)
Description
The CMCP205 Motor Fin Mounts provide a mounting location
for either magnetically mounted or permanently mounted
accelerometers on motors where the bearing housing is not
accessible. The Fin Mounts are machined from 416 SS and
are adhesive mounted between the cooling fins of the motor.
Optional
Optional Description
CMCP206 Adhesive Filler (50 ml)
CMCP207 Adhesive Dispenser
CMCP208 Mixing Nozzles (pkg. of 12)
Contents
Quantity Description
25 CMCP200-02 Mounting Pads
2 CMCP205-01 Motor Fin Mount
2 CMCP205-02 Motor Fin Mount
2 CMCP205-03 Motor Fin Mount
2 CMCP205-04 Motor Fin Mount
25 CMCP230-01 1/4" x 28 UNF x 1/2"
25 CMCP230-01 1/4" x 28 UNF x 3/4"
1 CMCP701 Spot Reamer
1 CMCP721-02 1/4" x 28 UNF Tap
1 Tap Handle
1 CMCP211 Adhesive and Activator
1 CMCP212 Silicone Dielectric
1 CMCP213 Silicone Sealant
12 CMCP208 Mixing Nozzles
2 CMCP206 Adhesive Filler
SKF Condition Monitoring Custom Products
Mounting Hardware
www.skf.com/cm
19
Description
The mounting kit includes a dome cover, a mounting base
with a single 3/4" NPT conduit connection, a neoprene base
gasket, o-ring gasket for the cover, mounting bolts, washers
and one (1) 1/2" NPT reducing bushing. The kit does not
include the accelerometer.
1.65"
3/4" NPT
1.65"
1.5"
Neoprene Gasket
2.5"
3.38"
Mounting Dimension
Description
The CMCP205 Piloted End Mill Aircraft Spot Reamers are
used to mill a 1" (2.54 cm) smooth flat area on bearing
housings. The flat area will accept a stud mounted
accelerometer or a glue (epoxy) mounted with an STI
Accelerometer Mounting Pad. A 7/32" drill, pilot, allen
wrench and end mill are included in each kit. The 7/32"
drilled hole can then be tapped with a 1/4" x 28 UNF starter
and bottom tap for stud mounted accelerometers.
CMCP701 Ordering Information
CMCP701 Description
Piloted End Mill Spot Reamer
SKF Condition Monitoring Custom Products
Instruments, Extension Cables and Adapters
www.skf.com/cm
22
Specifications
Maximum Rill Length 2,500 feet
Impedance 52 pF/feet
Color Sunlight Resistant Black
SKF Condition Monitoring Custom Products
Instruments, Extension Cables and Adapters
www.skf.com/cm
23
CMCP455 Cat5E
CMU to Ethernet Switch, specify length in 1000" increments,
Plenum CMP rated.
Description
The CMCP602H and CMCP603H extension cables are
designed to work with all Accelerometers using a MIL Spec
5015 connector. Both a two wire version (CMCP602H)
for standard accelerometers and a three wire version
(CMCP603H) for multiparameter accelerometers are
available.
Description
The CMCP602H and CMCP603H extension cables are
designed to work with all Accelerometers using a MIL Spec
5015 connector. Both a two wire version (CMCP602H)
for standard accelerometers and a three wire version
(CMCP603H) for multiparameter accelerometers are
available.
The cable connectors are rated to 257 ºF (125 ºC) and 01 Without Armor
the Teflon® cable wire is rated to 392 ºF (200 ºC). The 02 With Armor
cable is well suited to handle temperatures associated with 01 No Terminations
installation near steam piping, manifolds, etc. 03 Female BNC
Description
The CMCP604 Low Cost extension cables are designed to
work with all Accelerometers using a MIL Spec 5015, 2-Pin
connector.
The cable connector and cable wire are both rated to +185 °F
(+85 °C).
Connector Only Ordering Information
CMCP605 Description
MIL-E-QUAL Connector
®
Note: You will need a soldering iron, wire stripper and RTV silicone. Use
with CMCP606 Bulk Cable.
Description
The CMCP625 Adapter converts the MS, 2-Pin 5015
connector found on most industrial accelerometers
to BNC. The adapter comes with a completely potted metal
backshell and interfacial O-ring for positive sealing to the
accelerometer.
Description
The CMCP630 is a two channel (A/B) adapter for use
with SKF Condition Monitoring’s Microlog series of Data
Collector’s. It provides two BNC input/output connectors
for use with two accelerometers. It is ideal for use with the
Multi-Plane Balance program resident in the Microlog.
Description
The included fault bearing has a 0.004” outer race flaw. Specifications
Accelerometers easily mount to the bearing housing for Motor 1/9 HP, 1.4 Amps, CE Approved
desktop demonstration of data collection and vibration
Dimensions 5" W x 73/4" L x 7" H (12.7x19.7x17.8 mm)
analysis techniques. Excellent for displaying demodulation or
Weight 23 lbs. (10.4 kg)
Acceleration Enveloping vibration analysis.
Description
The Rotor Kit comes in two versions:
A Short Base 18.5" (470mm) Kit and a Long Base 31"
(787mm) Kit. Both versions come with a precision Speed
controller which allows you to vary the RPM.
Measurements may be obtained to study:
The kit can be supplied with an optional "Driver" mounting
plate should you decide to instrument it with eddy current • Frequency Based Signals
probes and may also be supplied with optional rolling • Time Based Signals
element bearings. Although the standard kit is designed for
110V input, a 230V, 50 Hz version is available upon request. • Orbital Analysis
• Shaft Runout
• Shaft Blow
CMCP601 Ordering Information
• Identity Rotor Critical Speeds
CMCP601 -XX -XX -XX Description
01 Short Base • Resonance Amplitude Factor
02 Long Base
00 Without Driver Plate
• Phase Analysis
01 With Driver Plate • Balancing
00 Without Ball Bearing
01 With Ball Bearing • Shaft Relative & Case Absolute
• 25 foot cables
Description
The CMCP 800 and CMCP 850 contain all the accessories
necessary to perform in-place field balancing of rotating
machinery. These are complete kits that provide the
necessary transducers, magnetic bases, A/B switch, cables,
trial weight kit, precision electronic balance scale, and more, CMCP800-01 Ordering Information
all packaged in a rugged watertight hard case that makes Microlog Field Balancing Accessory Kit with Optical Sensor
balancing easier and more accurate with the flip of a switch, includes:
two channels of vibration data can be input into the Microlog. CMCP800-01 Qty Description
This eliminates the need to keep moving the vibration sensor
1 CMSS 6155VK-U-CE Optical Phase Reference Kit
back and forth between balance planes. A variety of adapters with universal power supply
are included so that you can hook the Microlog to other
1 Watertight hard carrying case
sensor sources such as on-line systems and velocity probes.
1 CMSS 6160 printer adaptor
The CMCP 800 Field Balancing Accessory Kit contains all the 1 600 gram digital scale
accessories necessary to perform in-place field balancing of 1 CMCP 630 two channel (A/B) switch
rotating machinery with a SKF Microlog CMVA series. 2 CMSS 2100 accelerometer
The CMCP 850 Field Balancing Accessory Kit is a complete kit 2 CMCP 625 2-pin 5015 to BNC adaptor
for the SKF Microlog GX and CMXA Series. 2 25 feet BNC/BNC cables (A and B)
1 25 feet BNC/BNC cable (Phase)
In short, all you need to add is a Microlog and you are ready 2 CMSS 908-MD magnet for accelerometer
to balance pumps, fans, motors, couplings, small turbines
1 CMSS 6156 magnet and goose neck kit
and more.
1 CMSS T-5 roll of reflective tape
1 Custom vise grips M8 thread
1 CMCP 811 set of assorted balance weights
3 Banana to BNC adapter
1 Hex key set
1 Tape measure (English/Metric)
1 6 inch (15.2 cm) stainless steel rule (English/Metric)
1 6 inch (15.2 cm), 180° protractor
1 Compass
1 Clipboard with storage
SKF Condition Monitoring Custom Products
Field and Demonstration Kits
www.skf.com/cm
32
2 25 feet BNC/BNC cables (A and B) 1 CMCP 665-7PIN 25 feet BNC to Fisher 103 7-pin
phase input cable
1 25 feet BNC/BNC cable (Phase)
2 CMSS 908-MD Magnet for accelerometer
2 CMSS 908-MD magnet for accelerometer
1 CMSS 6156 magnet and goose neck kit
1 CMSS 6156 magnet and goose neck kit
1 CMSS T-5 roll of reflective tape
1 CMSS T-5 roll of reflective tape
1 Custom vise grips M8 thread
1 Custom vise grips M8 thread
1 CMCP 811 set of assorted balance weights
1 CMCP 811 set of assorted balance weights
3 Banana to BNC adapter
3 Banana to BNC adapter
1 Hex key set
1 Hex key set
1 Tape measure (English/Metric)
1 Tape measure (English/Metric)
1 6 inch (15.2 cm) stainless steel rule (English/Metric)
1 6 inch (15.2 cm) stainless steel rule (English/Metric)
1 6 inch (15.2 cm), 180° protractor
1 6 inch (15.2 cm), 180° protractor
1 Compass
1 Compass
1 Clipboard with storage
1 Clipboard with storage
1 Polar plot tablet
1 Application notes
The CMCP 800-01 and CMCP 800-02 SKF Microlog Field The CMCP 850-01,
Balancing Accessory Kits are compatible with the following CMCP 850-02 and
Microlog models: CMCP 850-03 SKF
• CMVA 65 Microlog Field Balancing
Accessory Kits are
• CMVA 60
compatible with the
• CMVA 55 following Microlog
• CMVA 10 and CMVA 30 (Users will need a CMSS models:
6135 Phase Adapter and CMSS 50189 Cable. Both • GX Series
items are not supplied with the kits and may be
• MX Series
purchased separately.)
• CMXA 50
SKF Condition Monitoring Custom Products
Field and Demonstration Kits
www.skf.com/cm
33
• Power Supply
• Magnetic Mounts
• Vice Grips
• Bucking Amplifier
• Optional Software
• 24 Compartment Container
Description
The CMCP811 provides an assortment of balancing
weights and is conveniently packaged as a starter kit. It
may be purchased stand-alone and is also available as a
component in the CMCP800 Balancing Accessories Kit for
Microlog™ users.
• Waterproof
• LOW COST
CMCP1100
Specifications
Dynamic Performance English SI
Sensitivity (±10%) 100 mV/g 10.2 mV/(m/s2)
Measurement Range ±50 g ±490 m/s2
Frequency Range: (±3 dB) 20 – 600k cpm 0.32 – 10k Hz
Mounted Resonant Frequency 1320k cpm 22k Hz
Amplitude Linearity ±1% ±1%
Transverse Sensitivity ≤7% ≤7%
Environmental English SI
Shock Limit 5,000 g pk 49k m/s2 pk
Temperature Range -65 to +185 °F -48 to 85 °C
CMCP1100S
Electrical English SI
Settling Time ≤2 sec ≤2 sec
Spectral Noise English SI
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
10 Hz: 8 μg / rt Hz 78.5 (mm/s²) /
Excitation Constant Current 2 to 20 mA 2 to 20 mA
100 Hz: 5 μg / rt Hz 49.1 (mm/s²) /
Output Impedance <150 ohms <150 ohms
1000 Hz 4 μg / rt Hz 39.2 (mm/s²) /
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Electrical Case Isolation >1088 ohms >1088 ohms
Electrical Protection RFI/ESD RFI/ESD
CMCP1100 Ordering Information
Integral Cable 22 AWG, 221 °F 22 AWG, 105 °C CMCP1100 -XX -XX Description
XX Low Cost Industrial Accelerometer
Mechanical English SI
CMCP1100S Side Exit
Size 0.5 x 1.05" 12.7 x 26.67 mm
05 5 Meter Integral Cable (16.5 feet)
Weight (including 5 M cable) 2.5 oz 70.7 g
10 10 Meter Integral Cable (33 feet)
Mounting Thread 1/4-28 UNF-2B 1/4-28 UNF-2B
20 20 Meter Integral Cable (66 feet)
Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 N-m
XX Specify Length
Sensing Element Ceramic/Shear Ceramic/Shear
-00 Blunt Cut
Case Material Stainless Steel Stainless Steel
-01 Female BNC Connector
Sealing Potted Potted
Wrench Flats 7/16" 7/16"
SKF Condition Monitoring Custom Products
Vibration and Temperature Sensors
www.skf.com/cm
37
Specifications
Dynamic Performance English SI
Sensitivity (±10%) 100 mV/g 10.2 mV/(m/s2)
Measurement Range ±50 g ±490 m/s2
Frequency Range: (±3 dB) 20 – 600k cpm 0.32 – 10k Hz
Mounted Resonant Frequency 1320k cpm 22k Hz
Amplitude Linearity ±1% ±1%
Transverse Sensitivity ≤7% ≤7% 1.730"
(44 mm)
1.735"
Environmental English SI (45 mm)
Description
The CMCP1210 series temperature sensor provides, fast
and accurate readings from bearings, blocks, and other
solids. CMCP’s spring-loaded holder ensures solid contact
in drilled holes with a built-in oil seal. The sensing probe
features a copper alloy tip for quick response to temperature
changes. Probes may be cut to length in the field using a tube
cutter. Explosion proof version is available upon request.
Specifications
CMCP1210 Ordering Information
Temperature Range -50 °F to 500 °F (-50 °C to 260 °C)
CMCP1210 -XX -X.X -XX Description
Material Probe: SS with Copper Alloy Tip
Holder: Nickel Plated Steel with Viton O-ring Tip Sensitive, Spring Loaded
Head: Aluminum or Stainless Steel Temperature Sensor for Rolling
Pressure Rating 50 psi (3.4 bar) -PA Platinum 392, 100 Ohm (US)
Insulation Resistance 10 megohms min. at 100 Vdc, leads to case, -PE Platinum 385, 100 Ohm (Meets DIN,
ungrounded junctions only on thermocouples EIC, Cl B)
Connection Terminal block for wires to 14 AWG -J Type J Iron-Constant Thermocouple
Conduit Thread 1/2" NPT -K Type K Chromel-Alumel Thermocouple
Bearing Entry 1/2" NPT, 3/4" Adapter Is Available -8.4 8.4” Standard Insertion Depth
(Field Cut)
Time Constant Typical value in moving water: 2.0 seconds
-X.X Insertion Depth - Specify 0.1"
Explosion Proof Version Class I Div I FM/CSA to 50 psi
Increments
Rating
Example: 6.7 = 6.7 Inches (Max 8.4")
-00 Standard Version
Definitions -01 XP Version, Aluminum Head
PA Platinum 392 (US Standard), 3-Wire, 100 Ω ±0.5% at 32 °F (0 °C) -02 XP Version, Stainless Steel Head
3.5"(89) 3.5"(89)
3.5"(89) 4.6"(116.8)
3.35"(85)
1.75"(44)
Time Constant 2.0 seconds typical in moving water Shock Withstands 100 G’s min. sine wave shock of 8
milliseconds duration
• 3-Wire Hookup
• Meets IP670
Specifications
Supply Voltage 12 to 24 VDC
Sensor Body Style Metal Cylindrical 21 dia.(0.83) 38 (1.50) 9
33 (1.30)
Barrel Size M12 17 4 10
• 4-20 mA Output
• Alarm Output
Description
The CMCP TACH3 digital tachometer is designed for a variety
of user applications.
The TACH3 is front panel programmable for single or
multiple pulses per revolution and scaling. It may be used as
Tachometer, Ratemeter, Counter, or a Totalizer. The CMCP
TACH3 offers a fixed or floating decimal point and can be Specifications
supplied with Remote Optical, Infrared, Laser, Proximity, and
Display 0.56" H, Seven Segment Red LED
Magnetic Sensors. It is directly compatible with a TTL input
and a 200mV to 50 Vac signal. Display Update 0.5 Second above 120 RPM
Cutout Size 1.74" X 3.58" (44mm X 91mm)
The TACH3 has front panel programmable set points, analog
Programmable Yes
voltage and current, TTL and RS232 outputs. The TACH3
is modified to accept a -24 Vdc Eddy Current Probe input. Range 5 - 999,999 RPM
The TACH3 offers more standard features than any other Size 1/8 DIN X 7"
tachometer available. Accuracy 0.001%
Power 115 and 230 Vac
Enclosures Pulse per Revolution 1 or Multiple
CMCP will integrate the CMCP TACH3 tachometer into Alarms Two Alarms, Programmable
NEMA4, NEMA4X, or Explosion Proof enclosures. Contact Alarm Contacts Form C relay contacts rated 1A at 115 Vac
your sales representative for details. Analog Outputs Simultaneous 4-2- mA & 0-5 Vdc
• 0.001% Accuracy
• RS232 Output
Description Specifications
The CMCP TACH3-XP is front panel programmable for single Input 200mV to 50 Vac signal
or multiple pulses per revolution and scaling. It may be used Range 5-999,999 RPM
as a Tachometer, Ratemeter, Counter or Totalizer.
Alarm Outputs Form C relays, rated 1A at 115 Vac
The CMCP TACH3-XP offers a fixed or floating decimal point Analog Outputs 4-20mA and 0-5 Vdc
and can be supplied with remote optical, infrared, laser,
Power 115 Vac, 230 Vac, 12 Vdc, 50/60 Hz
proximity, magnetic pickup, or eddy current probe sensors. It
Dimensions 7 3/4" W x 7 3/4" L x 11 1/2" D
is directly compatible with a TTL input and 200mV to 50 Vac
signal. The CMCP TACH3-XP has front panel programmable Weight 23 lbs.
alarm set points, 4-20mA, 0-5 Vdc, TTL and RS232 outputs. Approvals CSA, UL
Class I, Groups C&D
Class II, Groups E,F,G
Class III
• Nema 4X
• 2.5 mV/mil
Description
In Turbine Supervisory Instrumentation (TSI), case expansion
is an important measurement. Case expansion (or shell
expansion) is the growth of the machine case with increase of
temperature during machine startup and on-line operations.
The LVDT is mounted to the foundation at the opposite
end from where the turbine casing is attached. The LVDT
provides information on the change of position of the point
measured relative to the foundation.
• Power Distribution
• Panduit
• AC or Heating As Required
Description
M800A Monitor • BNC Panel • Terminals
CMCP has provided over 100 integrated custom cabinets Power Distribution • Low Noise Configuration • Ground Bars
and panels containing a wide variety of instrumentation. SKF integrated into Modular Custom Cabinet for ARAMCO by CMCP.
Condition Monitoring’s M800A, Monitor Interface Module
(MIM) Multilog (LMU), Mechanical Condition Monitor (MCM),
Low Cost Monitor (LCM), and other systems such as Surge
Control, and Turbine Governor’s, have all been successfully
incorporated into free standing cabinets.
CMCP custom cabinets and panels are available in many
styles, sizes, colors and methods of construction. They can be
outfitted with many different accessories depending on your
requirements. In general, each cabinet is custom engineered
to meet the individual parameters of a specific application.
Pre wired terminals, power distribution, ground bars,
smoke detectors, temperature detectors, tagging and other
accessories are provided as required by the customer.
Factory Acceptance Test (FAT) and scheduled inspections
are also provided as per the customer request. Complete
engineering design and documentation packages are
CMCP Integration Shop - League City, TX
available in either Auto CAD or Intergraph format.
Front Access Front & Back Access Front & Left/Right Access
Heat Fan Filter Air Purge Glass Front Door Door Locks
Note:
Due to the custom nature of cabinets and panels, great
care is needed to properly specify what is required in the
enclosure. The above listed specification matrix is provided as
a guide to prepare a specification. To obtain a quotation from
CMCP for your enclosure this should be included along with a
complete equipment listing of all instrumentation you desire
to be integrated into the enclosure.
SKF Condition Monitoring Custom Products
CMCP Product Application Chart
www.skf.com/cm
47
CM2378 SKF CMCP CM2378 SKF CMCP CM2355 SKF Reliability Systems
Custom Product Catalog – Pg. 36 Custom Product Catalog – Pg. 37 Standard Product Catalog – Pg. 26 CM2004 Eddy Probe System
Monitoring Type
CMSS 530/530A– VelocityTransmitter/Monitor
CMSS540/540A – Displacement Transmitter/Monitor CMCP5302
Switch or BNC Box CMSS590/590A– Enveloped Acceleration
Transmitter/Monitor
CMSS545/545A – PositionTransmitter/Monitor Monitor