Professional Documents
Culture Documents
CONSTRAINTS
Q.2 System is shown in the figure and man is pulling the rope from both
sides with constant speed ‘u’. Then the velocity of the block will be
3u 3u u
(A*) (B) (C) (D) None
4 2 4
Q.3 System is shown in figure and wedge is moving towards left with speed
2 m/s. Then velocity of the block B will be
(A) 3 m/s (B) 1 m/s
(C*) 2 m/s (D) 4 m/s
Q.4 In the figure shown, the speed of the truck is v to the right. The
speed with which the block is moving up at = 60° is :
(A) v (B) 2 v 3 (C*) 3v 4 (D) none
Q.5 Determine the relationship that governs the velocity of four cylinder
velocities as positive down.
Q.6 For the system shown, calculate velocity and acceleration of C.The velocity
and acclerations of A and B with respect to ground are marked.
[Ans: Vc = 4m/s, aC = 5m/s2]
Q.7 If the strings is inextensible, determine the velocity u of each block in terms of v and .
v v
(i) Fig. (A) u = _________. (ii) Fig. (B) u = _________. [Ans. (i) , (ii) ]
2 cos cos
Q.8 In the arrangement shown, all surfaces are frictionless. The rod R is constrained to move
vertically. The vertical acceleration of R is a1 and the horizontal acceleration of the
wedge W is a2. The ratio a1 a 2 is equal to
(A) sin (B) cos (C*) tan (D) cot
Q.10 The three blocks shown move with constant velocities. Find the velocity
of block A and B. Given VP2=10m/s, Vc=2m/s .
[Ans: vA=10m/s, vB=22m/s
Q.11 For the system shown, calculate velocity and acceleration of C.The velocity
and acclerations of A and B with respect to ground are marked.
[Ans: Vc = 4m/s, aC = 5m/s2]
Q.12 The pulley moves up with a velocity of 10m/sec. Two blocks are tied by a
string which passes over a pulley. The velocity V will be _________.
Given: vB = 5m/s [Ans: 25m/s]