Professional Documents
Culture Documents
com
PVmet-100 Station
Technical Specifications
PV back-panel temperature
Ambient temperature
The PVmet-100 is our standard model option which mast section that can be bolted to an existing
features sensors specific to PV power generation. structure.
Standard measurement parameters (Irradiance, PV
back-panel temperature, Ambient temperature). PVmet Back module temperature sensors are attached to the
is an innovative sensor platform for PV monitoring, back of the PV panel using thermal conductive
which is developed by Rainwise Inc. and provided by adhesive tape. They provide accurate panel
EKO. temperatures, an important parameter for efficiency
monitoring. One sensor is shipped with each system.
This low cost station is compact and simple to install The PVmet supports two sensors.
and to connect to any inverter or SCADA system. As
with all PVmet stations it includes a RS-485 Modbus All electrical connections are made using screw
interface (Sunspec® certified). terminals. Standard sensors are factory installed. As a
user/installer the only connections required are power,
PVmet series are turn-key, easy to install and can be communications and external BOM sensors.
deployed under harsh environmental conditions. EKO Removing the front cover accesses all connections.
provides a unique radiometer calibration compliant to The cover is secured with 4 screws.
the international standards defined by
ISO/IEC17025/9847.
Page 1 of 4
www.eko-eu.com
PVmet-100
Option PVmet-100
AT-01
Resolution -
BPT-01
Page 2 of 4
www.eko-eu.com
Resolution -
ML-01
Tilt response 0%
Impedance 50 Ω
Page 3 of 4
www.eko-eu.com
Cable length 5m
Options ML-01
Page 4 of 4