Professional Documents
Culture Documents
Shutdown
Previous Screen
i02110543
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2321 Combination Puller 1
B 1P-0510 Driver Group 1
Start By:
A. Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Remove".
NOTICE
Keep all parts clean from contaminants.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 20/07/2006
C-15 Truck Engine 6NZ00001-UP(SEBP3032 - 53) - Document Structure Página 2 de 3
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Illustration 1 g01001918
1. Remove the bolt that holds drive gear (1) to the shaft of body assembly (2) .
2. Use Tooling (A) in order to remove drive gear (1) from the shaft. Remove the key from the
shaft.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 20/07/2006
C-15 Truck Engine 6NZ00001-UP(SEBP3032 - 53) - Document Structure Página 3 de 3
Illustration 2 g01001929
Personal injury can result from parts and/or covers under spring
pressure.
3. Remove bolts (9) that hold retainer (8) to body assembly (2) .
4. Remove retainer (8), spring (7), and bypass valve (6) from the body assembly.
5. Remove bolts (5) and cover (4) from body assembly (2) .
Note: Inspect the bores in the cover. The aluminum cover does not have bearings. If the bores
in the cover are damaged, replace the cover with a new part.
6. Remove idler gear and drive gear (3) from body assembly (2) .
7. Use Tooling (B) in order to remove the bearings from body assembly (2) .
Copyright 1993 - 2006 Caterpillar Inc. Thu Jul 20 14:29:38 CDT 2006
All Rights Reserved.
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 20/07/2006